Military Engineer Services Tender

Point wiring for one light/fan/call bell point controlled by one 5 Amp switch with 1.5 Sqmm PVC (FRLS-H) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLSH) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping double lock type to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including CI/MS/PVC sunk boxes for mounting switches, sockets, regulators etc with 3 mm thick plastic laminated sheet cover of adequate size for one light/fan/bell point controlled by one switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed by Engr-in-charge. Notes :- (a) Wiring shall be done by using proper colour coding.(b) Earth wire shall be of green colour. (c) On RCC roof/celing PVC casing 'N' cappingshall be provided on surface with proper fixing clamps all as directed by Engr-in-Charge.

All as per serial item No 04 above but one 5 pin socket outlet, 5 amps on the same board complete all as specified and directedby Engr-in-charge

All as per serial item No 04 above but one 5 pin socket outlet, 5 amps, independent complete all as specified and directedby Engr-in-charge

All as per serial item No 04 above but for one 5 pin socket outlet 15 Amps on Independent board with cables 2.5 sqmm size complete all as specified and directed by Engr-in-charge

Supply and fixing of switch piano, flush type single pole one way 6 Amp, 240 volts ISI marked complete all as specified and as directed by Engr-in-charge

Supply and fixing of socket outlet 2 in 1, 3 pin, 6 A ISI marked complete all as specified and directed by Engr-in-charge

Supply and fixing of socket outlet 3 pin, 6/16 Amp, flush type, 240 Volts, 6 pin flush type complete ISI marked complete all as specified and directed by Engr-in-charge

Supply and fixing of switch piano, flush type single pole, one way 16 Amps, 240 volts ISI marked complete all as specified and directed by Engr-in-charge

Supply and fixing of Ding Dong Bell musical type AC 230 volt single pole complete all as specified and directed by Engr-in-charge

Supply and fixing of Bell Push flush type 5A switch, complete all as specified and directed by Engr-in-charge

Supply and fixing of ceiling rose, 3 terminal surface type complete all as specified and directed by Engr-in-charge

Supply and fixing of angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed by Engr-in-charge

Supply and Fixing LED bulb of 9 watt complete all as specified and directed by Engr-in-charge

Supply and fixing LED complete fitting including batten & T-8 Retro LED polycarbonate 1 x 20/18 Watt tuberod , appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engr-in-charge

Supply & fixing energy efficient LED light of 10/12 Watt of length - 02 Feet long having minimum 1100-1300 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed by Engr-in-charge

Taking down old burnt out bulk head fitting any type and Supply and Fix LED Bulk Head 10W with pressure plastic housing with clear prismatic diffuser, high efficient LEDs IP66 complete all as specified and directed by Engr-in-charge

Supply and fixing in replacement of existing worn out ceiling light with enviromental friendly, new generation, aesthetically designed, ultra modern recessed mounted LED light luminaries of size 595 mm x 595 mm an independent Isolated, electronic LED driver (SMPS based constant current supply) housed in CRCA powder coated sheet of system wattage - 36/40/42 Watt, Lumen out put- 4000-4300 Lm, THD 10%, PF 0.9, having short circuit and surge protection suitable for Armstrong/ Grid ceiling with all connected accessories including making connection with three core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed by Engr-in-charge

Supply and fixing of Sheet metal enclousers, TPN Distribution board 4 way, double door complete with appropriate size bus bar, neutral link and Earth Bar fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge. Note:- Distribution board and MCB's should be same make.

Supply and fixing of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as specified and directed by Engr-in-charge. Note:- Distribution board and MCB's should be same make.

Supply and fixing of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed by Engr-in-charge Note:- Distribution board and MCB's should be same make.

Supply and fixing of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed by Engr-in-charge Note:- Distribution board and MCB's should be same make.

Supply and fixing of 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge

Supply and fixing of SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge

Supply and fixing of 415V 10KA 'B' curve TPN 63 Amp miniature circuit breaker (MCB) of following poles and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge

M&L in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sq mm for phase and neutral and one run of 6.0 Sq mm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the medium grade ISI mark PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and directed by Engr-in-charge Note : Wiring shall be done in proper colour coding.

Supply and Fixing in repairs/replacement Ding Dong Bell type AC, 230 volts, single pole complete all as specified and directed by Engr-in-charge

Supply and Fixing in repairs/replacement switch socket combination 2 in 1, 5/3 pin, 6 and 16 Amp flush type universal, ISI marked complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs/replacement angle lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings. complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs/replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs/replacement of SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs/replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 volts double door complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs/replacement distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 4 way 240 volts double door complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs/replacement LED complete fitting including batten & T-8 Retro LED polycarbonate 1 x 20/18 Watt tuberod , appx 4 feet long, environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to tube fitting, complete fitting with all accessories and following specifications, complete all as specified and directed by Engr-in-charge

Supply and fixing in repairs/replacement LED light fitting warm white 1 x 36/33 Watt, 2 ft x 2 ft, ceiling surface type environment friendly, including electric connection with using 2 core flexible copper conductor cable 23/0.00076 from ceiling rose to light fitting, complete fitting and all accessories with following specifications and all as directed by Engr-in-charge

Supply and fixing in repair 3 pin plug top 16 Amp, complete all as specified and directed by Engr-in-charge

Supply and fixing in repairst of Exhaust fan Engineering plastic ac single phase 230 volt of size 250 mm sweep with blades and frame and louver. complete with louvre shutter complete all as specified and directed by Engr-in-charge

M&L for 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 06 sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site, complete all as specified and directed by Engr-in-charge

M&L for 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1m apart including 4mm dia suspension GI wire with stranded conductor 10 sqmm twin core cable flat or circular including taking down old unserviceable cable and stacking at site, complete all as specified and directed by Engr-in-charge

Deduct Credit for Demolished/Dismantled material Rs (-) 24,390.00 (Minus) as listed in Schedule 'A' Sec-II (Credit Schedule) Note : Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the 'Contract Sum'.