Military Engineer Services Tender

All as per Item No 2.00 here-in-above but for one 3 pin socket outlet, 5 Amps, 230 volts Independent board, with the cable 1.5 sqmm size complete all as specified and directed by Engr-in-Charge.

All as item No. 2.00 here-in-above but using cables 4 Sqmm for one 3/5 Pin Socket outlet 15 Amps & 5 Amps complete all as specified and directed by Engr-in-Charge.

S&F in replacement for Modular switch one way 6 Amp 1 module 230 volts, 50 HZ supply complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for Modular switch one way 20 Amp 1 module 230 volts , AC Supply complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for Modular socket outlet 6 Amps, 2/3 pin combined 2 module 230 volts complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for Modular h socket outlet 6 /20 Amps, 3 pin combined 2 module 230 volts complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement Modular switch , bell push, 6 amps one module , 230 volt , 50 Hz supply complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement Modular blanking plate 1 module complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for switch piano flush type one way single pole 5 Amps 230 volts, AC supply ISI marked complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for switch piano flush type one way single pole 15 Amps 230 volts, 50 Hz AC supply ISI marked complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement flush type , bell push, 5 amps one module , 230 volt , AC supply complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for socket outlet 3 pin 6 Amps flush type 230 volts ISI marked complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for socket outlet 2 in 1, 6 pin 5/16 Amps and multi pin flush type complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for ceiling rose surface bakelite 65x50 mm two to three terminals all as specified and directed by Engr-in-charge. Make : As per PS

S&F in replacement for lamp holder PVC/Poly corbonate type insulated body with back plate suitable for batten fittings complete all as specified and directed by Engr-in-Charge. Make : As per PS

S&F in replacement for door Bells electric Ding- dong/ musical type single phase 230Volts complete all as specified and directed by Engr-in-Charge. Make : As per PS

Supply and fixing in replacement of sheet metal enclosure SP with two pin and earth plug and socket including metal clad to with one single pole MCB 20/32 Amps complete all as specified and directed by Engr-in-Charge. Make: As per PS

S&F in replacement of LED light fittings 1x20 watt, 220 volts AC, decorative box type with driver, holder including 20 W LED tube lights suitable for roof ceiling including connecting up with three core copper flexible conductor cable of sutable size complete all as specified and directed by Engr-in-Charge. Make : As per PS

Supply and fix in replacement batten type with surface mounted LED tube light fitting with high efficient diffuser mirror light, polycarbonate housing in CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fix in replacement bulk head light fitting, 10 watt, energy efficient with lamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting complete including disconnecting and taking down old existing light fitting of any description complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fix in replacement bracket for security light made up of 25/40mm dia suitable for security light, 0.6 metre long GI pipe, light grade, bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fix inverter LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDs having optical grade polycarbonate lens with 4 hours battery back up all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down old unserviceable security light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fix in replacement of recess/ surface mounted LED flat panel 2' x 2' CRCA powder coated, 36 watt, IP20 with battery back up with provision of 2/3 core PVC copper conductor cable 1.5 Sqmm size to light fitting including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fix in replacement of Inverter LED tube light fitting 1x20 Watt with minimum 04 hours battery back up integrated aluminium batten with diffuser and including 20 Watt LED hight efficient , AC 220-240 V, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fix in replacement inverter LED bulb B-22 cap with opal diffuser, IP20 and inbuilt battery back up of 10 Watt capacity all as complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fixing inverter LED bulk head, IP65 and inbuilt battery back up of 10 Watt capacity all ascomplete all as specified and directed by Engr-in-Charge. Make: As per PS

Material and labour for sub main wiring with two single core FRLSH PVC insulated unsheathed copper conductor cable 2.5 sqmm drawn in and including rigid non metallic PVC medium grade 20 mm dia New concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 2.5 sqmm,green colour for earth continuity conductor including taking down old unserviceable sub main wiring and making good the disturbed surface complete all as specified and directed. NOTE: - 3 run of 2.50 sqmm cable with concealed conduct shall be measured as 1 unit complete all as specified and directed by Engr-in-Charge.

All as per Item No 30 above but for Material and labour for sub main wiring of 6.00 sqmm NOTE:-3 run of 6.0 sqmm cable with concealed conduct shall be measured as 1 unit complete all as specified and directed by Engr-in-Charge.

All as per Item No 30 above but for Material and labour for sub main wiring of 4.00 sqmm. NOTE:- 3 run of 4.0 sqmm cable with concealed conduct shall be measured as 1 unit complete all as specified and directed by Engr-in-Charge.

Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole thermal release type ,125AMPS ,25 KA as incomer and MCB s as out going complete with making suitable size of MS cabinet 2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed by Engr-in-Charge. Make: As per PS

All as per Item No 33 above but VTPN DB alongwith MCCB 4 pole,100AMPS 16 KA as incomer and MCB s as out going complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 4 Ways all complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 6 to 32 Amps, ISI complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, ISI marked complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fixing in repair MCB single pole, and Neutral 240 volts, 50Hz , breaking capacity 10KA, 'B' curve 40 to 63 Amps, ISI complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fix in repair MCCB four pole 415 volts, 160 Amps,25KA, 50 Hz, thermal release adjustable type with settubg upto 70% complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply and fixing in replacement 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable circulat of size 10 Sqmm including all incoming and outgoing connection with proper size of thimble complete all as specified and directed by Engr-in-Charge. Make: As per PS

All as per Item No 41 above but one twin core cable circulr at of size 16 Sqmm complete all as specified and directed by Engr-in-Charge. Make: As per PS

Material and labour for taking down existing lighting fiting any type/size/Make/capacity i.e T/L, Surface/ Recess Panel, flame proof, wall light, bulk head, mirror light etc and re-fixing the same after minor repair/cleaning including replacement connection wire with suitable size coper wire twin core 0.75 sqmm for connection from ceiling rose to light fitting complete all as specified and directed by Engr-in-Charge.

M&L for attending day to day complaints of E/M nature by means of checking unserviceable Electrical fitting and fixture and emergent fault rectification in electrical circuit incl no light , earth leakage, short circuit, neutral break mains /sub mains/internal circuits of existing system of main building / block ,making continious electric supply including carrying out minor repairs etc as required to make system in order / functional by replacing, copper cable , copper thimbles, glands, earthing wire complete all as specified and as directed as required at site by Engineer-in-Charge. NOTE : - (a) Items reqd for replacement such as switchs, sockets for power/light/ fan/ bell/geyser points including complete will be measured and paid under respective items of BoQ. (b) Contractor rep/supervisor will report to MES Service Centre alongwith qualified/Experianced electrician and helper to collect dockets between 0900 hrs to 1000 hrs on all working days for rectification of complaints and resubmit the dockets after completion of each job of each job on the same day. If contractor is failed to submit the docket within 48 hours after issuing of dockets , the contractor is liable to pay the penalty i.e. 20.00 per docket per day till the re-submission of docket. (c) Contractor will attend emergent nature of work i.e. no light, short circuit after working hours/holiday as when ordered. The rate of the is deemed to be included in above quoted rates.

Supply only PVC insulated, unsheathed cable 2.5 Sqmm single core 1100 volt grade with multi stranded copper conductor complete all as specified and directed by Engr-in-Charge. Make: As per PS

Supply only Cable PVC copper conductor flexible twin core 0.75mm complete all as specified and directed by Engr-in-Charge. Make: As per PS

Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron wire 4 mm as earthing lead (upto terminal point) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) Taking out old unserviceable earthing complete all as specified and directed. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to be including in quoted rates.