Military Engineer Services Tender

150mm thick Cement concrete type E-2, 1:5:10 (using 40mm graded crushed stone aggregate) as in fdn and subbase to received top layer, complete all as specified and directed by Engr-in-charge

100mm thick Cement concrete 1:1.5:3, type A-1 (using 20mm graded crushed stone aggregate) as in topping layer finished surface even and fair, complete all as specified and directed by Engr-in-charge

Forming 12mm thick expansion joints filled with pre-formed bituminous fillar and top 30mm primed and sealed with sealing compound, Grade 'A' complete, thickness of slab 100mm, complete all as specified and directed by Engr-in-charge

Removing excavated soil to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge.

Exavation in post holes in hard/dence soil (for similar holes) each n.exc 0.5 cum, getting out, returning,filling in and remming each of broken rubble mixed with earth aroundin layers not exc 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface, complete all as specified and directed by Engr-in-charge.

Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beams, tee, angle, channel or flat sections) including distance piece, cleats etc Fe 410-W (Gde - E - 250) Quality 'A', complete all as specified and as directed by Engineer-in-charge.

Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed by Engr-in-charge.

Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws all as specified and directed by Engr-in-charge.

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long and dia of neck 5 mm but not exceeding 10mm, complete all as specified and as directed by Engineer-in-charge.

Applying two coats of synthetic enamel painting to new surfaces steel based over a coat of red oxide primer exc. 10 cm width/girth including preparation of surfaces including filling with filler where required, complete all as specified and directed.

E&M Items

Point wiring with PVC insulated single core cable (FRLS) of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories laid on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable (FRLS) of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board of suitable for housing like switches, sockets, fan regulators etc for One light point/one fan point controlled by one switch, complete all as specified and as directed by Engineer-in-Charge.

Point wiring with PVC insulated single core cable (FRLS) of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories laid on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable (FRLS) of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board of suitable size for housing like switches, sockets, fan regulators etc for One 3 pin 5 amps socket outlet on independent board, complete all as specified and as directed by Engineer-in-Charge.

Point wiring with PVC insulated single core cable (FRLS) of stranded copper conductors of size 1.5 sqmm, 1100 volt grade drawn in and including rigid PVC casing caping accessories laid on wall/ceiling surface and fixed with PVC saddles and back-plate and GI screws, including PVC insulated single core cable (FRLS) of stranded copper conductor of size 1.5 sqmm as earth continuous wire connected to common earth and PVC Board of suitable size for housing like switches, sockets, etc for One 3 pin 5 amps socket outlet on same board, complete all as specified and as directed by Engineer-in-Charge.

All as per item No 17 above but with conductor of size 4 sqmm (Nominal area) (FRLS) for one 3 pin socket outlet 15 Amps on independent board complete and earth continuity wire with 4 sqmm (FRLS) PVC insulated stranded copper conductor Cable, complete all as specified and as directed by Engineer-in-Charge.

Switch Socket Combination 2 in 1, 3 pin, 6 and 16 amp flush type Universal, complete all as specified and directed.

Socket 2 in 1, 5 pin 5 Amp flush type, complete all as specified and directed.

Switch piano flush type 5/6 Amp, single pole, one way, complete all as specified and directed.

Switch socket combination 2 in 1, 3 pin, 6 Amp flush type, complete all as specified and directed.

Ceiling rose surface Bakelite 65x50mm two to three terminal, complete all as specified and directed.

Basic all purpose surface and wall mounted LED batten with polycarbonate housing and integreted electronic driver of cap 20 watt, 4 feet long, with all accessories, complete all as specified and directed.

Sheet metal powder coated versatile single door SPN distribution board, 8 way suitable for MCB's fitted with copper bus bar rated 200amps, neutral link , earth bar and din rail suitable for use on 240 Volt, 50Hz, complete all as specified and directed.

Sheet metal powder coated versatile double door TPN distribution board, 6 way, system fitted with two cover with copper bus bar rated, neutral link , earth bar and din rail suitable for use on 415 Volt, 50Hz supply, complete all as specified and directed.

MCB TPN 40 to 100 Amp with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed.

MCB SPN 63 Amp, 240V with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed.

MCB SP 6-32 Amp with 10KA breaking capacity of 'C' series in distribution boards, complete all as specified and directed.

Sheet metal enclosures with socket plug top and MCBs Triple pole of 32 Amp 415 Volts, 50 Hz and earth enclosure with three pin and earth plug with socket complete with one triple pole MCB with all accessories, complete all as specified and directed.

XLPE insulated screened PVC bedded galvanised steel strip or wire armored, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 70 Sqmm 3.5 core, complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, laying of pipes etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft / loose soil, complete all as specified & directed.

Returning, filling in excavated soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed by Engr-in-Charge.

Un reinforced pre cast concrete cable cover class LV type I, flat size 250 mm x 150 mm x 40 mm, complete all as specified and directed by Engr-in -Charge.

Sand cushioning with fine sand to under ground cables in trenches/ducts in layers of 8 cm deep before laying the cable and 15 cm deep after laying and stretching the cable as specified in clause 19.75 of SSR Part-I complete all as specified and directed by Engr-in -Charge. (Note:-Punned thickness shall be measured and paid)

LED flood light 120 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and directed by Engr-in -Charge.

Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6.3) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, surrounded on all sides by alternate layers of 150 mm thick charcoal and common salt, connected to galvanized earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI light grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm grade stone aggreate including form work cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result, complete all as specified and directed.

Note :- Item for removal of excavated material of E/m Portion shall be measured and paid in respective item of B/R Portion