Military Engineer Services Tender

All as per item No 2 above but for one 3 pin socket combination outlet 5 Amp on independent board complete all as specified and directed.

All as per item No 2 above but for one 3 pin socket outlet 5 Amp on the same board with other switches complete all as specified and directed.

All as per item No 2 above but for power point 3 pin switch socket 15 Amp with PVC copper conductor cable FRLS multistrand unsheathed 2.5 Sqmm on independent board incl one run 2.5 Sqmm multistrand PVC copper conductor cable FRLS for earth continuity in and including PVC casing and capping fixed on wall including PVC box 2 mm complete all as specified and as directed.

Supply & fixing in replacement of lamp holder insulated body with back plate complete all as specified and as directed.

Supply & fixing in replacement of Switch piano flush button single pole 6 Amps 230 volts one way complete all as directed.

Supply & fixing in replacement of switch Socket combination 5 pin 5 & 15 Amps flush type 230 volts complete all as specified and directed.

Supply & fixing in replacement of switch Socket combination flush type 3/5 pin 5/6 Amps 230 volts complete all as specified and directed.

Supply and fix Socket outlet flush type 3/5 pin 5/6 Amps 230 volts complete all as specified and directed.

Supply & fixing in replacement of Ceiling rose, surface Bakelite three terminals complete all as specified and directed.

Supply & fixing in replacement of bell push single pole 230 volt complete all as specified and directed.

Supply & fixing in replacement for bell ding-dong single pole complete all as specified and directed.

S & F in replacement decorative durable LED batten fitting of 18/20W, 4 feet long with decorative and caps, powder coated CRCA decorative for LED tube of any capacity, 4 feet long (white colour) tube having driver, connector block etc complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core all as required at site complete all as specified and directed.

S&F in replacement of LED 7/9 Watt, 230 volts 50 Hz AC complete all as specified and directed.

S&F in replacement LED Mirror light fitting 7 watt 230 volts box type, with standard specification etc warm white colour complete all as specified and directed confirming to Crompton cat part No- LCL-07-CDL or eqvt in Philips/Wipro/Bajaj/Havells.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volt 12 Ways complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volt 8 Ways complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used Triple pole & neutral 415 Volt 04 Ways complete all as specified and directed.

Supply and fix in replacement of MCB SPN 40 to 63 Amp 10 KA C Curve 240 Volts AC ISI marked complete all as specified and directed.

S&F in replacement MCB single phase (SP), 6 to 32 Amps 240 Volts 10 KA C Curve complete all as specified and directed.

Supply and fix in replacement of sheet metal enclosure for VTPN DBs double door IP 43 when MCCB's to be used three pole & neutral 415 Volt 8 Ways complete all as specified and directed.

Supply and fix in replacement of microprocessor based relase MCCB four pole Adjustable type, 160 Amps with breaking capacity 36 KA, 415 Volts AC ISI marked complete all as specified and directed.

Supply, laying, jointing and testing LT underground XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 35 Sqmm 3.5 core laid in trenches/poles/loop including Brass terminal lugs etac complete all as specified and directed.

Supply, Installation , testing & Commissioning of of factory made cubical out door LT panel pedestal mounting type Confirming to IP-54 , CPRI approved fabricated from 2 mm thick CRCA sheet powder coated, Aluminium bus bar 400 Amp rating capacity, Three Phase and 400 Amp for Neutral with minimum clearance 75 mm , all as per IS shall be available inside for easy access and working condition, Markings should be made to identify incoming and outgoing circuits and earthing bolts at two points. inside panel for housing the following accessories :- (a) AL Bus bar (RYB & N) (b) Phase indicating lamp (RYB) - 01 set (c) MCCB 400 Amps, Incommer 36 KA, 4 pole 415 Volts 50 HZ AC - 01 No (d) MCCB 4 pole 100 amp Outgoing 25 KA, 4 pole 415 Volts 50 HZ AC - 03 Nos (02 Nos for supply & 01 No of MCCB stand by) (e) MCCB 4 pole 63 amp Outgoing 25 KA, 4 pole 415 Volts 50 HZ AC - 03 Nos (f) On load change over capicity 100A - 01 Nos (g) Digital type voltmeter (0-500 Volts) with LCD display with inbuilt selector switch - 01 No (h) Digital type Ammeter (0-250 Amps) with LCD display with inbuilt selector switch -01 Nos

M&L for submain wiring along with 2x10 sqmm+1x6 sq mm earth wire of FRLS PVC insulated copper conductor single core cable in surface casing and caping of appropriate size complete all as specified and directed

M & L for submain wiring alongwith earth wire with the following sizes of FRLSH PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sqmm + 1x6.0 sqmm earth wire complete all as specified and directed

S&F in replacement sheet metal enclosure TPN for DBs with 200 Amps bus bar of 4 way 240 volts with blank plate Double Door complete all as specified and directed.

Supply and fixing in replacement MCB four poles, 40-63 Amps 415V 10KA 'C' curve in the DB complete with connection testing and commissioning complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth, for foundation etc. or for shafts, welles cesspitsm, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depthe in hard/dense soil and getting out , complete all as specified and as directed.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25m, complete all as specified and directed.

Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point,complete all as specified and directed.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified and directed. Note- Punned thickness of 18 CM will be measured and paid in this item.

S & F in replacement of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-I flate size 250 x 150x40mm, complete all as specified and directed.

Supply, laying, jointing and testing LT underground cable heavy duty 1100 volts grade PVC insulated steel wire or tape armoured and overall PVC sheathed of size 35 Sqmm 3.5 core laid in trenches/poles/loop including Brass terminal lugs etac complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated aluminium stranded conductor of size 16.0 Sqmm 2 Core served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metere apart including 6 mm suspension wire,one twin core cable flat or circular complete all as specified and directed.

M&L in replacement for Earthing complete with galvanized steel earth plate electrode 600mm x600mmx 6mm thick buried directly in ground. (earth pit not less than 2.25m deep below ground level) with top edge of plate not less than 1.5m below normal ground level, connected to using galvanised iron strip 25×4mm as earthing lead dia by GI watering pipe with funnel and wire mesh and 15mm dia protection pipe earth work etc complete all as shown in electrical plate No 5 of MES plate No. 6 complete all as specified and directed.

S&F in replacement of GI tubing 50 mm bore light grade for including making good the disturbed surfaces complete all as specified and directed.

Schedule of Credit