Military Engineer Services Tender

M&L for Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the strating point, complete all as specified.

M&L for Sand cushioning to underground cables 8 cm below the cable before laying & 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Par-I, complete all as specified. Note : Punned thickness of 18 CM will be measured and paid for Sand cushioning.

Supply and laying of factory made, machine pressed, unreinforced, pre-cast concrete cable cover class LV type-1 flate size 250mm x 150mm x 40mm, complete all as specified and directed

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 185 Sqmm 3.5 core complete all as specified and directed

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 120 Sqmm 3.5 core complete all as specified and directed

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts grade, of size 95 Sqmm 3.5 core complete all as specified and directed

Supply, installation, testing and commissioning indoor type 350 KVAr with 8 steps (1 x 100 + 3 x 50 + 4 x 25) APFC Panel with APP all polypropylene) Capacitor rated for 15% non linear load, complete all as specified and as directed by Engineer-in-Charge.

Supplying fabrication installation and testing of LT feeder pillar box outdoor type 60 cm height from ground to bottom of pillar box, front door with locking arrangement with duplicate keys including PCC foundation and connecting LT Panel cubical flush patern type made of 3.15mm thick MS sheet with angle iron base frame of size 50 x 50 x 6mm for mounting of panel, dust proof welded steel structure with locking arrangement having TPN bus bar 600 amps rating capacity mounted on insulators including painting of panel with two coats of synthetic enamel paint over a coat of red oxide primer having IP-54 and conferming to IS-8623 and including following accessories:- (a) MCCB 4P 415 Volts 400 Amp 36 KA-01 No (incoming) (b) MCCB TP 415 Volts 125 Amps 25 KA-02 No (O/G) (c) MCCB TP 415 Volts 100 Amps 25 KA-02 No (O/G) (d) MCB TPN 32A -02 No (O/G) (e) Digital Voltmeter 0-500 Amps (f) Digital Ammeter 0-100 Amp with single phase preventor. (g) Phase indicator (RYB) Set-01

Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm thick burried directly in ground (earth pit not less than 2.25 Meter deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level, connecting to the galvanised iron strip of size 32 x 6 mm as earth lead, by means of bolts, nuts, check nuts and washers of galvanised iron 32 x 6 mm earth lead protected by provision of GI medium grade pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 Nos and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom 1.75 meter long placed on top edge of earth plate, common salt and charcoal filling, test point made out of 75 x 50 x 6mm phosphorous bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres all as per electrical plate No 3 and connecting to earth test point including testing on completion all as specified and directed by the Engineer-in-Charge.