Military Engineer Services Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Technical
Technical
Additional Eligibility
Technical Capacity
... View More
The required prior work experience for the bidder includes satisfactory completion of requisite value works. The details of work completed and under progress should be submitted, which includes the CA No., value of work, date of commencement, date of completion, and extended date of completion. For MES enlisted contractors, they should be enlisted in Class 'A' and above and category b (ii) & c(i), subject to satisfactory remarks regarding performance in respect of works in hand. For other contractors, they should meet the enlistment criteria of 'A' Class & category b (ii) & c(i) contractor with regard to satisfactorily completion of requisite value works. In case of contractors one class below the eligible class, they may be considered if they have previously completed similar works satisfactorily. However, specific values and percentages of similar works completed are not mentioned. The value of the contract should be submitted, but no specific amount or percentage is provided as a requirement for the bidder.
Costs
EMD
₹ 5,85,000Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_706668_1Tender No
80051/09/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply and lay pipe Galvanised , medium class including fittings 20 mm dia laid in trenchs/walls including alll necessary fittings clamps etc complete and conneting to existing system all as specified and directed.
60
-
-
... More
Supply and fix Gun metal globe gate valves with iron wheel head screw both end for GI Pipe of size 25mm dia complete all as specified and directed.
5
-
-
... More
Supply and fix Gun metal globe gate valves with iron wheel head screw both end for GI Pipe of size 40mm dia complete all as specified and directed.
5
7
35
... More
Supply and fix Gun metal globe gate valves with iron wheel head screw both end for GI Pipe of size 20mm dia complete all as specified and directed.
6
7
42
... More
Cutting existing steel tubing for alternations or eddition screwing existing steel tubing for making connections all as spfd and directed.
4
7
28
... More
M&L for providing tracer/antifreezing cable required to keep the pipe warm to avoid freezing of GI and DI pipe complete all as specified and directed.
60
7
420
... More
M & L for construction of new brick masonary valve pit chamber of size 600x600x900mm (Internal size) with 230 mm thick brick wall in CM (1:4), 15mm plastering on internal & external surfaces in CM (1:4), 75mm thick PCC(1:4:8) type D-2 using 40mm graded stone aggregate including MS sheet cover 3mm thick hinged with 40x40x6mm MS angle iron frame having locking arragements. Cover is painted with two coat of synthetic enamel paint over one coat of red oxied primer including necessary earth work and removal of surplus soil to a distance n.exc. 50m and deposited complete all as directed.
4
7
28
... More
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc non exc 10 Sqm on plan and nexc 1.5 m in depthe and getting out for laying of cable / pole etc in hard/dense soil all as specified and directed.
180
7
1260
... More
Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.
179
7
1253
... More
Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point all as specified and directed.
1
7
7
... More
HOT WATER STORAGE AND HEATING TANK Supply installation testing and commissioning of stainless steel ( 304 grade) hot water storage tank with inner shall of 4 mm, thick and top and bottom dish ends of 4mm thick duly insulated with 100 mm thick Puff insulation of 45 KG/cm2 density and outer covering of 0.8 mm thick SS 304 sheet operating pressure 5kg/cm2 the tank shall be with built in heating elements with control and main panel complete with thermosts, temeprature controllers with contactors and main incomer, 60mm dia main hole cover, inlet, outlet and drain connections, mounting legs, level control switch, air vent, safety valve as required for following capacities Approved Make Rapid Therm/Western/Satwant Tanks
-
-
-
... More
Plant 1 System 1 (Officers mess,JCOs living and JCOs Mess)
(i) Storage Capacity: 2500 Liters
(ii) Heating Capacity : 27KW/415V/3 phase water immersion heaters made from dia 11mm SS316L grade tube assembled and brazed to 2"BSP Brass Hex Plug Length below the hex 875mm including 75mm cold zone terminals enclosed in a metallic terminal cap.9 KW three Banks
(iii) Heat Tracer : Flameproof Heat tracing cable of 45 Watt/meter to operate at 230V single phase AC, with junction boxes will be installed at bottom Dishend and on cylindrical portion with the help of self adhesive aluminium film.
1
7
7
... More
Plant 1 System 2 ( Officers Accomd, 05 and 06 Servant Qtrs)
(i) Storage Capacity: 2500 Liters
(ii) Heating Capacity : 27KW/415V/3 phase water immersion heaters made from dia 11mm SS316L grade tube assembled and brazed to 2"BSP Brass Hex Plug Length below the hex 875mm including 75mm cold zone terminals enclosed in a metallic terminal cap.9 KW three Banks
(iii) Heat Tracer : Flameproof Heat tracing cable of 45 Watt/meter to operate at 230V single phase AC, with junction boxes will be installed at bottom Dishend and on cylindrical portion with the help of self adhesive aluminium film.
1
7
7
... More
Plant 2 ( Adm Bdg)
(i) Storage Capacity: 1500 Liters
(ii) Heating Capacity : 18 KW/415V/3 phase water immersion heaters made from dia 11mm SS316L grade tube assembled and brazed to 2"BSP Brass Hex Plug Length below the hex 875mm including 75mm cold zone terminals enclosed in a metallic terminal cap.9 KW two Banks
(iii) Heat Tracer : Flameproof Heat tracing cable of 45 Watt/meter to operate at 230V single phase AC, with junction boxes will be installed at bottom Dishend and on cylindrical portion with the help of self adhesive aluminium film.
1
7
7
... More
Plant 3 (MI Room)
(i) Storage Capacity: 500 Liters
(ii) Heating Capacity : 3 KW/415V/3 phase water immersion heaters made from dia 11mm SS316L grade tube assembled and brazed to 2"BSP Brass Hex Plug Length below the hex 875mm including 75mm cold zone terminals enclosed in a metallic terminal cap.3 KW one Banks
(iii) Heat Tracer : Flameproof Heat tracing cable of 20 Watt/meter to operate at 230V single phase AC, with junction boxes will be installed at bottom Dishend and on cylindrical portion with the help of self adhesive aluminium film.
1
7
7
... More
UNDER GROUND WATERSTORAGE TANK : Supply, installation, testing of Plastic tanks made out of 100% virgin food grade,pthhalate free plastic, rotamoulded, robustly designed multi ribbed, multi layred complete with excavation of pit 600mm larger then the size of tank. Installation includes PCC 150mm thick flat leveled bed, back filled after installing the tank with sand free of gravel 300mm around the tank properly compacted and final covered with concrete slab for full width and length of tank. The tank shall be burried with its top 1000 mm below the ground level. A insulated 750mm x750mm main hole cover shall be provided with a masonary pit 500 mm above the ground to prevent surface water from flowing in to tank and for maintanace and servicing of heating elements.Make Sintex/ Equivalant
-
-
-
... More
Plant 1 (System 1 & 2) 10000 liters capacity with 10 kw heating element
1
7
7
... More
Plant 2 2000 liters capacity with 2 kw heating element
1
7
7
... More
Plant 3 1000 liters capacity with 1 kw heating element
1
7
7
... More
HYDRO PNEUMATIC SYSTEM : Hydro pneumatic system (variable speed) for pumping water from storage tank and pressurising hot water tank as per the demand with verticle Stainless steel monoblock pumps of below mentioned capacities, precharged expansion vessel with interchangeable butyl rubber membrane connected to. Outlet header with necessary flanges. Gaskets, isolation valves, nuts, baits, etc. complete Control panel with pressure switch, variable frequency drive, electrical wiring. Cabling from panel to. Pumps; - level controller complete with all accessories suction and discharge header with valves Set of accessories such as pressure switches, VFD control, cabling, automatic control panel, Mounting frame with Antivibration pads and RCC/ cement concrete foundation for the pump unit (Make Wilo/ Groundfoss/Armstrong.
-
-
-
... More
Plant 1 (System 1) Capacity: 37 GPM @ 206 ft head 3 nos (Two working one stanby) and pressure vessel 500 liters.
1
7
7
... More
Plant 1 (System 2) Capacity: 28 GPM @ 191 ft head 3 nos (Two working one stanby) and pressure vessel 500 liters
1
7
7
... More
Plant 2 Capacity: 16 GPM @ 128 ft head 2 nos (One working one stanby) and pressure vessel 100 liters
1
7
7
... More
Plant 3 Capacity: 8.72 GPM @ 120 ft head 3 nos (One working one stanby) and pressure vessel 50 liters
1
7
7
... More
PUMPS FOR HOT WATER RECIRCULATION CIRCUIT Suppling, erection, testing & commissioning of Mono Block Hot Water Pump Sets with mechanical seals and stainles steel impeller capable of delivering under mentioned capcaties for hot water re-circulation against a head of each pump shall comprise the following as required as per specification Mono Block type, 2 Nos 100 mm dial type pressure gauges with syphon & cock with mounting frame with Antivibration pads and RCC/ cement concrete foundation for the pump unit (Make Wilo/ Groundfoss/Armstrong
-
-
-
... More
Plant 1 (System 1) Capacity: 2 GPM @ 40.5 ft head 2 nos (One working one stanby)
1
7
7
... More
Plant 1 (System 2) Capacity: 2 GPM @ 40.5 ft head 2 nos (One working one stanby)
1
7
7
... More
Plant 2 1GPM @ 21.21 ft head (One working one stanby)
1
7
7
... More
Plant 3 Capacity: 1GPM @ 16 ft head 2 nos (One working one stanby)
1
7
7
... More
Hot Water Piping Supplying, fixing, testing and commissioning of Pre-insulated Hot water Glycol pipes of following sizes of MS 'B' class having thickness of puff insulation as mentioned below and 26 G GI/AI cladding, along with necessary clamps, vibration isolators and fittings such as bends, tees, etc but excluding valves, strainers, gauges etc.Which will be measured and paid seperately under respective items. Pipe duly painted shall be fixed on wall with adequate support or burried in ground 1.5mtr depth, excavation and refilling etc as per specification and as required complete in all respect. The pipes should be insulated with closed cell puff of density 24 kg/Cum 50 mm thickness. The pipe should be workable in the temp range of -50 degree celcius to + 70 degree celcius.. (Make Jindal /Surya / Prakash) Note :- The pipe size 150mm & below shall be MS 'B' class as per IS 1239
-
-
-
... More
65 mm dia
190
7
1330
... More
50 mm dia
147
7
1029
... More
40 mm dia
30
7
210
... More
32 mm dia
230
7
1610
... More
25 mm dia
470
7
3290
... More
20 mm dia
20
7
140
... More
15 mm dia
460
7
3220
... More
Valves & Strainer Supply, installation, testing and commissioning of following Valves, Strainer, Gauges in the hot water plumbing duly insulated to the same specifications as the connected piping & adequetaly supported as per specifications.Make C/R / Audco /Sant/ Cim
-
-
-
... More
Butterfly Valve
-
-
-
... More
(i) 50 mm dia
36
7
252
... More
(ii) 65 mm dia
6
7
42
... More
Ball Valves
-
-
-
... More
(i) 25 mm dia
48
7
336
... More
(ii) 15 mm dia
28
7
196
... More
Balancing Valve (Plate type Non Return Valves)
-
-
-
... More
(i) 50 mm dia
7
7
49
... More
(i) 25 mm dia spring type
10
7
70
... More
Y-strainer
-
-
-
... More
(i) 50 mm dia
6
7
42
... More
(i) 25 mm dia
10
7
70
... More
Automatic air release valves
32
7
224
... More
Supply, installation, testing and commissioning of alcohol fitted 'V' form thermometer
6
7
42
... More
LT PANELS Plant 1 System 1 and 2 Supply, assembly,erection, testing & commissioning of dust, damp and vermin proof free standing CPRI approved factory built sheet steel enclosed LT main distribution board suitable for 3 Ph 415 V 50 Hz fabricated out of 2.0 mm thick CRCA sheet duly painted with seven tank process complete. AI bus bar 300 Amp rating and ribbed with sheet of suitable size complete for heating system to be installed in Plant room. The panle slould be IP 43 confirming to IS 8623 ( CPRI Approved)
Incomer: 01 No comprising the following :-
(a) 200 Amp MCCB 4 pole 25 KA with thermal setting (b)Phase indicating lights & control fuses-01 Set
(c) Digital Voltmeter 4 x 4 (0-500V) range with inbuilt selector switch-01 Set
(d) Digital Amp meter (0-300A) range with C.T.S of 300/5 ratio And inbuilt selector switch. 1 set Outgoing: (i) 32 A, TPN 10 KA 'C' curve MCB for Hydrupnumatic pumps panel supply with with indicating lamps BS 0-30 A Ammeter with CT-02 Nos ii) 16 A, TPN 10 KA 'C' curve MCB for hot water circulating pumps with automatic DOL starter with indicating lamps BS 0-60 A Ammeter with CT-04 Nos iii) 32 A, TPN 10 KA 'C' curve MCB with contactor and thermostat with indicating lamps BS 0-20 A Ammeter with CT-01 Nos for UG tank heater iv) 100 A, TPN 10 KA 'C' curve MCB for Hot water tank heater with indicating lamps BS 0-100 Ammeter with CT- 2 Nos
1
7
7
... More
LT PANELS Plant 2 Supply, assembly,erection, testing & commissioning of dust, damp and vermin proof free standing CPRI approved factory built sheet steel enclosed LT main distribution board suitable for 3 Ph 415 V 50 Hz fabricated out of 2.0 mm thick CRCA sheet duly painted with seven tank process complete. AI bus bar 150 Amp rating and ribbed with sheet of suitable size complete for heating system to be installed in Plant room. The panle slould be IP 43 confirming to IS 8623
Incomer: 01 No comprising the following :-
(a) 100 Amp MCCB 4 pole 25 KA with thermal setting (b)Phase indicating lights & control fuses-01 Set
(c) Digital Voltmeter 4 x 4 (0-500V) range with inbuilt selector switch-01 Set
(d) Digital Amp meter (0-100A) range with C.T.S of 100/5 ratio And inbuilt selector switch. 1 set Outgoing:
i) 16 A, TPN 10 KA 'C' curve MCB for Hydrupnumatic pumps panel supply with with indicating lamps BS 0-30 A Ammeter with CT-01Nos ii) 10 A, SPN 10 KA 'C' curve MCB for hot water circulating pumps with automatic DOL starter with indicating lamps BS 0-60 A Ammeter with CT-02 Nos iii) 10 A, SPN 10 KA 'C' curve MCB with contactor and thermostat with indicating lamps BS 0-20 A Ammeter with CT-01 Nos for UG tank heater iv) 63 A, TPN 10 KA 'C' curve MCB for Hot water tank heater with indicating lamps BS 0-100 Ammeter with CT- 1 Nos
1
7
7
... More
LT PANELS Plant 3 Supply, assembly,erection, testing & commissioning of dust, damp and vermin proof free standing CPRI approved factory built sheet steel enclosed LT main distribution board suitable for 3 Ph 415 V 50 Hz fabricated out of 2.0 mm thick CRCA sheet duly painted with seven tank process complete. AI bus bar 100 Amp rating and ribbed with sheet of suitable size complete for heating system to be installed in Plant room. The panle slould be IP 43 confirming to IS 8623
Incomer: 01 No comprising the following :-
(a) 63 Amp MCCB 4 pole 25 KA with thermal setting (b)Phase indicating lights & control fuses-01 Set
(c) Digital Voltmeter 4 x 4 (0-500V) range with inbuilt selector switch-01 Set
(iii) Digital Amp meter (0-60A) range with C.T.S of 60/5 ratio And inbuilt selector switch. 1 set Outgoing: (i) 16 A, TPN 10 KA 'C' curve MCB for Hydrupnumatic pumps panel supply with with indicating lamps BS 0-30 A Ammeter with CT-01 Nos ii) 16 A, TPN 10 KA 'C' curve MCB for hot water circulating pumps with automatic DOL starter with indicating lamps BS 0-60 A Ammeter with CT-02 Nos iii) 10 A, SPN 10 KA 'C' curve MCB with contactor and thermostat with indicating lamps BS 0-20 A Ammeter with CT-01 Nos for UG tank heater iv) 32 A, TPN 10 KA 'C' curve MCB for Hot water tank heater with indicating lamps BS 0-60 Ammeter with CT- 1 Nos
1
7
7
... More
CABLES: Supplying of following sizes of insulated PVC sheathed copper conductor armoured cables of 1.1 KV grade conforming to IS-1554.
-
-
-
... More
4 x 16 Sq. mm
40
7
280
... More
3.5 x 70 Sq. mm
20
7
140
... More
4 x 10 Sq. mm
80
7
560
... More
2 x 1.5 Sq. mm
40
7
280
... More
3 x 4 Sq. mm
60
7
420
... More
Heat Tracer : Flameproof Heat tracing cable of 10 Watt/meter to operate at 230V single phase AC, with junction boxes will be fixed on pipes from UG tank to Pumps and hot water tank, and other exposed pipes to prevent freezing with the help of self adhesive aluminium film.before insulation.
60
7
420
... More
Earth continuety GI wire 8 gauge for eathing from panel to electrical fittings
60
7
420
... More
GI Cable Tray with hangers 300 mm x 45 mm
30
7
210
... More
CHS
-
-
-
... More
ELECTRIC BOILER Supply installation testing and commissioning of vertical type Glycol based Electrical operated central heating below mentioned Boiler of capacity with 85⁰c/75⁰c out let & inlet temprature, AC ,3 phase 415V 50HZ , complete with control panel, sequencer and connection cable from LT Panel to Boiler complete with of MS powder coated enclosure insulated SS water storage tank pressure tested for 300 PSI, electrical resistance immersion type heating element of copper tube (chrome plated to operated 3 phase 415 volts, 50 Hz, complete with : Digital temperature controller contactors etc inlet/outlet connections, Electrical control panel alongwith complete internal wiring as integral part of Boiler for safe and automatic control of temprature Other Safety features like pressure relief valve, safety thermostat and all other safety features as per manufacturers design and recommendation. mounted on PCC platform of suitable size as recommended by manufacturer. Make : Rapid Cool, Western or Equivalant approved make by GE.
-
-
-
... More
Plant 1 Capacity : 220 KW/Hr (Two Working & One standby)
3
7
21
... More
Plant 2 Capacity : 250 KW/Hr (One Working & One standby)
2
7
14
... More
Plant 3 Capacity : 125 KW/Hr (One Working & one standby)
2
7
14
... More
GLYCOL CIRCULATION CENTRIFUGAL PUMPS:Supply, installation, testing & commissioning of monoblock centrifugal pumps driven by suitable capacity electric motor and mechanical seal for ethylene glycol water mixture solution of 25 Mtr head complete with accessories including floating cement concrete foundation and isolation pads and all as specified and directed of follwing flow rate (Make Wilo/ Groundfoss/Armstrong.
-
-
-
... More
330 LPM 25 Mtr head (Plant 1) ( Two working one standby)
3
7
21
... More
200 LPM 25 Mtr head (Plant 2) ( Two working one standby)
3
7
21
... More
200 LPM 25 Mtr head (Plant 3) ( Two working one standby)
2
7
14
... More
GLYCOL CIRCULATION CENTRIFUGAL PUMPS:
Supply, installation, testing & commissioning of monoblock centrifugal pumps driven by suitable capacity electric motor and mechanical seal for ethylene glycol water mixture solution of 25 Mtr head complete with accessories including floating cement concrete foundation and isolation pads and all as specified and directed of follwing flow rate (Make Wilo/ Groundfoss/Armstrong.
6
7
42
... More
EXPANSION TANK Supply & Installation of overhead expansion tank of size 1000 Liters MS 3mm thick sheet complete covered with 13 mm closed cell electrometric insulation complete with removable lid, in/out /drain/ overflow system mounting arrangement and complete connection.
3
7
21
... More
GLYCOL FLUID TANK. 1000 Liters capacity 3mm thick MS Tank Complete with removable lid, in/ out/ drains/ overflows system, mounting arrangement and complete with connection.
3
7
21
... More
HOT GLYCOL FLUID PIPING Supplying and laying, connecting, fixing and testing of M S ERW ‘C’ class piping complete with fittings, duly insulated with closed cell elastomeric insulation 45 to 55 Kg/m³ density covered with shrink wrap polythene sheet for the following sizes of Hot Glycol fluid pipes complete all as specified and directed. Pipes running outside will be burried 750 mm below the ground level, cost of excavation and re-filling will be paid saperately.( Note all pipes exposed to atmosphere and in the plant room will be cladded with Aluminium Sheet 26 Gauge)
-
-
-
... More
125mm dia pipe with 25 mm thick nitrile insulation
120
7
840
... More
100mm dia pipe with 25 mm thick nitrile insulation
110
7
770
... More
80mm dia pipe with 25 mm thick nitrile insulation
170
7
1190
... More
65mm dia pipe with 19mm thick nitrile insulation
290
7
2030
... More
50mm dia pipe with 19 mm thick nitrile insulation
700
7
4900
... More
40mm dia pipe with 19mm thick nitrile insulation
365
7
2555
... More
32mm dia pipe with 13 mm thick nitrile insulation
180
7
1260
... More
25mm dia pipe with 13mm thick nitrile insulation
550
7
3850
... More
20mm dia pipe with 13mm thick nitrile insulation
727
7
5089
... More
HOT GLYCOL FLUID PIPING VALVES AND FITTINGS Supply and fixing, connecting and testing of Valve and fittings for the following sizes of Hot Glycol fluid pipes
-
-
-
... More
Butter fly valves 100 mm
21
7
147
... More
Butter fly valves 80 mm
6
7
42
... More
Butter fly valves 65 mm
4
7
28
... More
Butter fly valves 50 mm
32
7
224
... More
Butter fly valves 40 mm
2
7
14
... More
Dual plate Non Return Valves 100 mm dia
6
7
42
... More
Dual plate Non Return Valves 80 mm dia
2
7
14
... More
Dual plate Non Return Valves 50 mm dia
2
7
14
... More
Balancing Valves 100 mm dia
3
7
21
... More
Balancing Valves 80 mm dia
3
7
21
... More
Balancing Valves 65 mm dia
3
7
21
... More
Balancing Valves 50 mm dia
11
7
77
... More
Balancing Valves 40 mm dia
2
7
14
... More
Ball valves 25 mm dia
70
7
490
... More
Y Strainer 100 mm dia
3
7
21
... More
Y Strainer 65 mm dia
3
7
21
... More
Y Strainer 50 mm dia
2
7
14
... More
Inlet/outlet valves of required size for FCUs / towel rad
440
7
3080
... More
Pressure gauges with cocks and syphon
34
7
238
... More
Water flow switches
8
7
56
... More
Automatic air purgers valves
47
7
329
... More
Inlet/outlet copper /pex connection of size 12mm 2mtr length
440
7
3080
... More
GLYCOL CHARGE : Supply and first fill for makeup requirement for the first year of operation of glycol and water mixture along with the necessary additives and inhibitor in cognition and supplied in barrels. The mixture of 45%water and 55% glycol shall have freezing temperature of -37 deg C
10347
7
72429
... More
LT PANELS : Plant 1 Supply, assembly, erection , testing & commissioning of dust, damp and vermin proof free standing CPRI approved factory built sheet steel enclosed LT main distribution board suitable for 3 Ph 415V 50 Hz fabricated out of 2.0 mm thick CRCA sheet duly spray painted complete Al. bus bar 1800 Amp rating and ribbed with sheet of suitable size complete for heating system to be installed in Plant room.
Incomer :- 1 Each Main Incoming a) 1200 Amp MCCB 1 Nos Digital Voltmeter 0-500 volt 96 sq.mm - 01 nos Digital Ammeter 0-1200 Amp 96 sq.mm flush type-01 nos . g) Indication lamps (RYB) with control HRC fuse with fuse fitting. Control MCB- 6 Amp, 10 KA- 06 nos j) 1200 A/5 CT-0 1 set (3 nos) 2.02 Outgoing : Outgoing Section a) 600 Amp. 50 KA MCCB 4 pole with Thermal magnetic Release-03 Nos(b) 32A, TPN MCB 415Volts, 50 Hz for primary and circulation pumps with automatic DOL starter 15 Amp with indicating lamps - 4 Nos
(ii) 0-30 A Ammeter - 4 Nos
(iii) 16 A SPN MCB, 240 volts, 50 Hz with DOL starter for Glycol tranfer pumps - 2 Nos
1
7
7
... More
LT PANELS : Plant 2 Supply, assembly, erection , testing & commissioning of dust, damp and vermin proof free standing CPRI approved factory built sheet steel enclosed LT main distribution board suitable for 3 Ph 415V 50 Hz fabricated out of 2.0 mm thick CRCA sheet duly spray painted complete Al. bus bar 1200 Amp rating and ribbed with sheet of suitable size complete for heating system to be installed in Plant room.
Incomer:- 1 Each Main Incoming a) 800 Amp MCCB 1 Nos Digital Voltmeter 0-500 volt 96 sq.mm - 01 nos Digital Ammeter 0-800 Amp 96 sq.mm flush type-01 nos . g) Indication lamps (RYB) with control HRC fuse with fuse fitting. Control MCB- 6 Amp, 10 KA- 06 nos j) 800 A/5 CT-0 1 set (3 nos) 2.02. Outgoing Outgoing Section a) 600 Amp. 50 KA MCCB 4 pole with Thermal magnetic Release-02 Nos(b) 32A, TPN MCB 415Volts, 50 Hz for primary and circulation pumps with automatic DOL starter 15 Amp with indicating lamps - 32 Nos
(ii) 0-30 A Ammeter - 3 Nos
(iii) 16 A SPN MCB, 240 volts, 50 Hz with DOL starter for Glycol tranfer pumps - 2 Nos
1
7
7
... More
LT PANELS : Plant 3 Supply, assembly, erection , testing & commissioning of dust, damp and vermin proof free standing CPRI approved factory built sheet steel enclosed LT main distribution board suitable for 3 Ph 415V 50 Hz fabricated out of 2.0 mm thick CRCA sheet duly spray painted complete Al. bus bar 600 Amp rating and ribbed with sheet of suitable size complete for heating system to be installed in Plant room.Incomer:- 1 Each Main Incoming a) 400 Amp MCCB 1 Nos Digital Voltmeter 0-500 volt 96 sq.mm - 01 nos Digital Ammeter 0-800 Amp 96 sq.mm flush type-01 nos . g) Indication lamps (RYB) with control HRC fuse with fuse fitting. Control MCB- 6 Amp, 10 KA- 06 nos j) 800 A/5 CT-0 1 set (3 nos) 2.02 Outgoing Outgoing Section a) 150 Amp. 50 KA MCCB 4 pole with Thermal magnetic Release-03 Nos(b) 32A, TPN MCB 415Volts, 50 Hz for primary and circulation pumps with automatic DOL starter 15 Amp with indicating lamps - 3 Nos
(ii) 0-30 A Ammeter - 3 Nos
(iii) 16 A SPN MCB, 240 volts, 50 Hz with DOL starter for Glycol tranfer pumps - 2 Nos
1
7
7
... More
CABLE TRAYS Fabricating and installing following sizes of perforated M.S. Cable trays Including horizontal and vertical bends, reducers, tees, cross members and other accessories as required and duly suspended from the ceiling with M.S. suspenders and including painting.( For cabling work in plant room.) 150 mm width x 50 mm depth
56
7
392
... More
3 x 6 Sq. mm (Copper)
180
7
1260
... More
4 x 4 Sq. mm (Copper)
185
7
1295
... More
4 x 1.5 Sq. mm (Copper)
210
7
1470
... More
3 Core 300 Sq. mm (Copper)
50
7
350
... More
3 Core 150 Sq. mm (Copper)
115
7
805
... More
ELECTRICAL ACCESSORIES Providing and fixing 6 SWG dia G.I. wire on surface of in recess for loop earthing interconnecting main panel and other electrical equipment
110
7
770
... More
Providing and fixing M.V. danger notice plate of 200 mm x 150 mm, made of mild steel at least 2mm thick and vitreous enameled white on both sides and with inscription in signal red color on front side as required.
3
7
21
... More
Providing “ No Smoking “ and “ Flammable” sign board as per requirement of Petroleum Rules and CCOE Nagpur).
3
7
21
... More
Notice board ( Display Board) of size 1200 mmx 900 m for displaying the duty roaster description and including resuscitation chart in three languages for electric shock and burn injury complete all as specified and directed
3
7
21
... More
FAN COIL UNITS Supplying, installing, testing and commissioning of decorative wall mounted fan coil units complete with EPS body Copper tube aluminium finned coil centrifugal fan decorative type.
-
-
-
... More
Cap 6000 Kcal/hr
36
7
252
... More
Cap 4500 Kcal/hr
62
7
434
... More
Cap 3000 Kcal/hr
82
7
574
... More
Towel Radiator of size 1100mm x 900 mm
40
7
280
... More
Supply installation of MS/PVC pipe duct covers strong ad easy to install to cover the pipes running in condition space duly painted to match the surroundings of size :-
-
-
-
... More
100 mm x 65 mm
600
7
4200
... More
150mm x 80 mm
325
7
2275
... More
200 mm x 100 mm
255
7
1785
... More
Material and labour for point wiring with 1.5 sqmm cable FRLS PVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5 sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLS copper conductor as earthing and connected to common earthing with PVC heavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etc for the following : -
-
-
-
... More
One 3 pin socket outlet, 5 Amp independent
180
7
1260
... More
One 3 Pin Switch Socket Combination, 6 Amps independent board
180
7
1260
... More
Note : Colour coding for point and sub main wiring should be maintained at site. Incase of any deviation necessary recovery will be made as applicable.
-
-
-
... More
Excavation in trenches, not exceeding 1.5 m wide exc 1 m in depth for laying of pipes, tanks etc and and getting out hard, dense soil.
140
7
980
... More
Returning filling in with approved earth/soil including spreading leveling watering and well ramming in layers not exceeding 25 cm complete
125
7
875
... More
Removing excavated soil (spoils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above starting point
15
7
105
... More
M & L Earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earting etc as required 32x6 mm galvanised iron strip .
60
7
420
... More
Earthing complete with galvanized steel earth plate electrode 60cm x60 cm x6 mm thick buried in ground ( earth pit not less than 2,25 meters deep below normal ground level with top edge of the plate not less than 1.5 meters below normal ground level, connecting to the Galvanized iron earth lead 32x6 mm size by means of bolts, nits check nits and washers of galvanized iron and 32 x6 mm earth lead protection by provision of GI light grade pipe 40 mm bore including provision of concentrate pit in PCC (1:2:4) type by using B -1 using 20 mm graded stone aggregates with 40 mm thick cover of RCC 1:2:4) reinforced with XPM ( weigh not less than 4gs / sqm ) and frame of angle iron 25 mm x 25 mm x6 mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40 mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard/ dense soil , returning filling in and removal of surplus soil to a distance not exceeding 59 meters, all a per electrical plate No 5 of SSR-1991 Part ! and connecting to earth test point all as specified or indicated including testing on completion
-
-
-
... More
Note item of earthing included cost of 7.5 m long Galvanized iron earth lead 32x 6 mm size and protection pipe of 40 mm bore GI light grade any variation in length shall be adjusted through deviations order.
6
7
42
... More
External Electric Supply
-
-
-
... More
Supply , installationtesting and commissioning step down 11/0.433 KV off load transformer, 3 Phase 4 wire AC, 50 cycles, 1000 KVA copper wound out door type transformer of copper wound transformer step up/ step down, type with off load manual tap changing arrangments on HT side to vary secondary voltage upto ± 7.5% with step of ± 2.5% including suitable cable entry boxes on both side to receive HT XLPE cable complete in all respect with standard accessories and fitments conforming to IS-1180 and IS2026 Dy-11 connection complete all as specified and directed. Transformer shall be painted with two coat of smoke gray epoxy paint confirming to IS - 632. (a) Rating and diagram plate. (b) Earthing terminal two Nos (c) Thermameter pocket (d) Air release valve with plug (e) Winding temperature/Oil temperature indicator housed in a separate box (f) Conservator with oil indicator (g) Silca breather assembly
1
7
7
... More
Supply and fix HT 11 KV, out door type gang operated air-break switch suitable for horizontal or vertical mounting fixed type triple pole mechanically operated, mounted on insulator and steel frame with operating mechanism worked from ground level for current rating upto 400 Amp all as specified and directed.
1
7
7
... More
M & L for Air break switch insulator for 11000 volts suitable for current rating 400 Amps all as specified and directed.
9
7
63
... More
Supply, laying, jointing & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts earthed grade of size 3 core 185 Sqm mm all as specifed and directed.
50
7
350
... More
M&L for cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination, heat shrink tyoe, joint complete with jointing materials and acessories suitable for 3 core XLPE, armoured, AI conductor cable of size 120 Sqmm to 185 Sqmm all as specifed and directed.
2
7
14
... More
Supply and laying of galvanised steel tubing light grade with all fitting and laid in trenches or fixed along wall/poles of size 100 mm dia all as specifed and directed
50
7
350
... More
Supply, Installation, testing and commissioning of cubical type wall/floor mounted distribution Panel suitable for indoor application for 415V, 3 phase, 4 wire, 50 Hz Ac supply system fabricated in compartmentalized design from CRCA sheet of 2mm, I/C cleaning & finishing complete 7 tanks process for powder coating in approved shade, having suitable Amp capacity estensible type copper bus bar of high conductivity, SMC bus bar supports, with short circuit withstand capacity of 50 KA, the bus bar spacing Ph-Ph, Ph-N, Ph-body shall be designed for altitude 3500 mtrs the design shall be approved by Engineer-in-charge with entire panel shall have common earth bus suitable size at the rear with 2 Nos earth stud, solid connection from main bus bar to switchgear with required size at the rear with 2 Nos earth stud, rated and control panel wiring with 1.5 Sqmm, PVC insulated FRLS copper conductor single core cable, cable alloys, cable glands plates, providing & fixing following switch gears :- Incomming (a) ACB MDO microprocessor based, 415 Volt, 4 pole 1600 Amp 50 KA -01 No (b) Digital multi functional panel meter showing volt, frequency, PF along with CTs - 01 set (c) Indicator lamp LED type RYB - 01 Set outgoing (a) ACB MDO microprocessor based, 415 Volt, 4 pole 630 Amp 36 KA -03 Nos (For Hot Water Generator) (b) On load changeover switch 1600 Amps, 4 Pole (c) MCCB 4 Pole 415 Volt 250 Amp - 02 Nos (One working and one spare) Note : (i) Incoming and ougoing cable shall be fixed with appropriate size of lugs. (ii) Entries of all size of cables in panel should be done through adequate size of metallic cable galnds. All connection shall be made through spreading link between bus bar and ACB/MCCB.
1
7
7
... More
Supply, laying , jointing & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts earthed grade, of size 3.5 core 185 sq mm all as specified and directed. .
220
7
1540
... More
Supply, laying , jointing & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 1100 volts earthed grade, of size 3.5 core 630 sq mm all as specified and directed. .
1850
7
12950
... More
Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc non exc 10 Sqm on plan and nexc 1.5 m in depthe and getting out for laying of cable / pole etc in hard/dense soil all as specified and directed.
545
7
3815
... More
Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil all as specified and directed.
320
7
2240
... More
Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point all as specified and directed.
192
7
1344
... More
M&L for dry sand cushioning to underground electric cable 8mm thick before laying of cable and 15cm thick after laying of cable laid in trenches all as specified and directed.
163
7
1141
... More
Supplying and alying un-reinforced precast concrete cable cover, class HV, type 1 flat of size 250mm x150mm x 40mm placed perpendicular of the cable complete all as specified and directed.
12750
7
89250
... More
Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 32X6 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 3 of SSR Part I of 2009.00 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, I watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 32X6 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified and directed.
26
7
182
... More
Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 4 mm wire as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 3 of SSR Part I of 2009.00 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, I watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 32X6 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified and directed.
20
7
140
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%