Ladakh Autonomous Hill Development Council Tender
... More
Bidassist is designed as a single destination for all government tenders from across the world in one place. If you require any information or detail about any e-tender the Ladakh government has posted, Bidassist helps a registered bidder to get the same.As BidAssist is a very user-friendly website it will help you find the specific Ladakh etender you're looking for. Read further to learn how to search and bid for etender Ladakh.
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
The class eligibility requirement to bid or participate in this tender is that bidders must be approved and eligible contractors, however the specific class of contractor is not mentioned.
Bid Capacity
... View More
The formula for Assessed Available Bid Capacity is A*N*M - B.
Technical Capacity
... View More
The required prior work experience for the bidder includes completion of similar nature of works with a value of not less than 33% of the advertised cost during the last five years. The bidder should have completed at least one similar nature of work individually costing not less than 33% of the advertised cost during the last 05 years. In terms of percentage, the lead partner in a Joint Venture should meet not less than 50% of the qualification criteria, and the remaining partners should meet not less than 25% of the criteria. The Joint Venture must collectively satisfy the subject of the criteria. The bidder should demonstrate experience and resources sufficient to meet the aggregate of the qualifying criteria for the individual contracts. The bidder should have a minimum available bid capacity for construction work equal to or more than the total bid value excluding maintenance. The available bid capacity will be calculated based on the maximum value of civil engineering works executed in any one year during the last five years, updated to the price level of the last year at the rate of 8 percent a year. The bidder needs to attach a certificate from a Chartered Accountant, with the amount specified in lakhs (Rs), for the total annual volume of civil engineering construction work executed and payments received in the last five years preceding the year in which bids are invited.
Costs
EMD
₹ 7,10,980Document Cost
₹ 3,555Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_LAHDC_16087_1Tender No
E-TENDER 01 OF TDA KARGIL 2025-26Tender Authority
Ladakh Autonomous Hill Development Council ViewPurchaser Address
-Website
http://tenders.ladakh.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolishing stone rubble masonry manually/ precast cement concretet block by mechanical means including
stacking of serviceable material and disposal of unserviceable material within 50
metres lead as per direction of Engineer-in-charge :
199.48
772
154020.5
... More
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres
span and 5 metres height including stacking the material within 50 metres lead
15.14.1 Of sectional area 40 square centimetres and above
155
13
2123.5
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter
including chowkhats, architrave, holdfasts etc. complete and stacking within 50
metres lead :
15.12.1 Of area 3 sq. metres and below
22
274
6032.18
... More
Demolishing mud phaska in terracing and disposal of material within 50 metres lead
139.53
609
84982.14
... More
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking
the material within 50 metres lead of:
15.28.1 G.S. Sheet
139.53
121
16955.69
... More
Dismantling of remaining items of old building like ply work, flooring railing etc complete job
1
41125
41125
... More
Excavation work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge: ORDINARY ROCK 20%
15.79
489
7731.26
... More
ALL KINDS OF SOIL 80%
631.52
269
170447.25
... More
Filling available excavated earth (excluding rock) in trenches plinth, sides of foundation etc in layer not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50cm and lead up to 50 m and lift upto 1.5 mtr.
315.76
213
67547.38
... More
Dumping of stone excluding cost of stone (on horizontal)
58.47
225
13204.28
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 ( 1 cement : 6 course sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with cement mortar 1:6 ( 1 cement : 6 course sand) quarry
40.8
5561
226914.5
... More
Random rubble masonry with hard stone laid dry in foundation, plinth &
walls with bond stone
4.08
3942
16085.89
... More
Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded
stone aggregate 40 mm nominal size derived from natural sources) Mud Mat
38.59
5556
214433.83
... More
Providing and laying position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources)
147.35
6228
917810.73
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone
aggregate) finished
11.3.1 40 mm thick with 20 mm nominal size stone aggregate
921.38
561
517631.28
... More
Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3graded stone aggregate 20 mm nominal size)
432.83
10775
4663894.74
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
64924.5
106
6889138.7
... More
Centering and shuttering including shuttering propping etc and removal of form for Foundation,footing bases of columns etc for mass concrete.
446.98
297
132815.64
... More
Centering and shuttering including shuttering propping etc and removal of form for Columns, pillars, piers, abutments, posts and struts.
488.37
746
364499.83
... More
Centering and shuttering including shuttering propping etc and removal of form for Suspended floors, roofs, landings, balconies and assess plate forms.
1155.95
716
828689
... More
Centering and shuttering including shuttering propping etc and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers.
763.26
584
445949.92
... More
Centering and shuttering including shuttering propping etc and removal of form for Stairs (excluding landings) except spiral staircases.
45.12
864
38997.22
... More
Design Supply and installation/Fixing staircase railling of stainless steel (Grade 304) railing(Top Handrail Dia 50mm , two number intermediate Horizontal tubes Dia 25mm and Rectangular Two Pair Balusters Dia 38mm @1000mm C/C) made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) including fixing the railing with necessary accessories , newal post , balusters and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, necessary screws/fixtures complete job as approved by engineer incharge (Note : No additional payment shall be made to master pillar/Newal Post )
30
3701
111037.5
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and
framed work, including Complete job. Truss Area = 4127sft @43.5 KG/SQM
16699.95
152
2551084.36
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape andpitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) totalcoated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpasteel grade, 5-7 microns epoxy primer on both side of the sheet and polyester
top coat 15-18 microns. Sheet should have protective guard film of 25 micronsminimum to avoid scratches during transportation and should be supplied insingle length upto 12 metre or as desired by Engineer-in-charge. The sheet shallbe fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM
seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excludingthe cost of purlins, rafters and trusses and including cutting to size and shapewherever required.
499.08
1446
721769.5
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with
polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen
washers complete.
0.80 mm thick with zinc coating not less than 275 gm/m2
100
843
84373
... More
Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved
block laying polymer modified adhesive mortar all complete as per direction
of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be
made for seperately).
288.23
11515
3318968.45
... More
WOOD WORK
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately) Sal wood.
12.4
138055
1711892.91
... More
Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for seperately,all complete as per direction of Engineer-in-charge.(second class teak wood 35 mm thick shutter)
159.67
4746
757868.87
... More
Providing and fixing panelling or panelling and glazing in panelled or panelled and
glazed shutters for doors, windows and clerestory windows (Area of opening for
panel inserts excluding portion inside grooves or rebates to be measured).
Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :
159.67
2158
344647.7
... More
Providing & fixing glass panes with putty and glazing clips in steel doors,
windows, clerestory windows, 4.0 mm thick glass panes
287.81
1361
391916.63
... More
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)
286.14
301
86142.45
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
286.14
138
39641.84
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer (Black Paint to be used for Trombe Wall)
286.14
152
43702.16
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.
New work (Two or more coats applied @ 1.43 litre/10 sqm. Over & including priming coat
of exterior primer applied @ 0.90 litre/10 sqm.
286.14
157
44966.9
... More
Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)
559.36
62
34864.91
... More
Preparing newly primed wooden surface for painting by way of filling of putty sand papering rubbing complete.
559.36
116
65148.66
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work.
559.36
138
77387.46
... More
Providing & Fixing finished brass hanging type floor door stopper with necessary screws etc
complete.
26
117
3067.48
... More
FLOORING:
MARBLE STONE FLOORING Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with:
66.79
3913
261385.34
... More
Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,
Robina or any other approved brand as per specification approved by engineer In charge )
650.23
1809
1176591.19
... More
Providing and laying vitrified floor tiles in different sizes (thickness tobe specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete i.e Size of tile 600x600 mm
9.72
1361
13231.16
... More
P/F 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer) of approved make in colours, shades except burgundy bottle green, black of any size as approved by engineer-in-charge in Skirting, risers of steps, and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 course sand) and jointing with grey cement slurry @3.3kg/sqm including pointing the joint with white cement and matching pigments etc., complete.
59.63
1246
74303.15
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval
,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but
Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having
approx. 15 % perforated areawith perforation size and pattern as approved by
the Engineer-in-charge and as per manufacturer'sspecification, with all 4 side
tapered and backed by acoustical tissue with NRC value not less than 0.61
176.74
1377
243404.56
... More
Providing and fixing white vitreous china pedestal type (European type/ wash
down type) water closet pan.
W.C. pan with ISI marked white solid plastic seat and lid.
2
8036
16073.82
... More
Providing and fixing water closet squatting pan ( Indian type W.C. pan) with 100 mm sand cast Iron P or Strap, 10 litre low level P.V. C. flushing cistern including flush pipe (of approved make) "manually controled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.
Orissa pattern white vitreous china W.C. pan of size 580x440 mm with integral type foot
rests. JAGUAR/CERA Make
4
6179
24716.44
... More
Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm
C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:
White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar
taps JAGUAR / CERA/HINDWARE Make
5
3289
16448
... More
P/F of mirrors of superior glass with plastic moulded frame(of approved quality) and of required size and shape. With 6mm thick hard board backing. Rectangular Shape 1500 x 450 mm
20
679
13587.6
... More
Providing and fixing soil waste & vent pipe:
PVC Pipe. 110mm dia (10 feet unit Length)
15
1192
17889.45
... More
PVC Pipe. 75mm dia (10 feet unit Length)
20
904
18095
... More
PVC Bend 110mm dia
15
205
3084.45
... More
PVC Bend 75mm dia
15
205
3084.45
... More
PVC Tee 110mm dia
15
246
3701.25
... More
PVC Tee 75mm dia
15
246
3701.25
... More
PVC Collar 110mm dia
15
164
2467.5
... More
PVC Collar 75mm dia
15
123
1850.55
... More
PVC trap 110mm dia
15
370
5551.8
... More
PVC trap 75mm dia
15
329
4935
... More
PVC Socket 110mm dia
15
164
2467.5
... More
PVC Socket 75mm dia
15
164
2467.5
... More
PVC door junction 110mm dia
15
287
4318.05
... More
PVC door junction 75mm dia
18
287
5181.66
... More
Providing and fixing 3 layer Thermex Pipe PP-R (Poly propylene Random copolymer)pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.
PN-16 pipe , 25mm OD(SDR-7.4)
200
482
96592
... More
PN-16 pipe , 32mm OD(SDR-7.4)
50
525
26273.5
... More
P/F CP brass toilet paper holder including cost of wodden,PVC,play etc.
5
616
3084.35
... More
Providing and fixing Wall mount Liquid Soap Dispenser of approved brand
5
1273
6366.15
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88
mm, weighing not less than 170 gms
2
660
1320.44
... More
Providing and fixing accessories of standard and quality make of approved manufacturer
including all necessary fixtures required.
L-Drops for room door
30
143
4290.6
... More
Handles for door/WINDOW
50
476
23836
... More
15 mm C.P. brass tap with elbow operation lever
30
476
14301.6
... More
15 mm C.P. brass 2 in 1 tap
40
476
19068.8
... More
Handles with lock system of main doors ( Godrej Make)
25
6885
172149.25
... More
Providing and installation of PUF (Puf Insulated Tanks) water tank capacity 1000 ltrs of approved brand (SYNTEX OR ANY OTHER APPROVED BRAND) as per direction
4
32900
131600
... More
Placing and fixing of 25 mm dia. 2mm thick ISI marked, PVC conduit pipe for carrying
electrical wiring in the slab with light box and fan box complete job
300
98
29610
... More
THERMAL INSULATION:
Providing and fixing 12 mm thick tongued and grooved Pine wood (Soft Wood ) 4-5 inch in width panelling or wall panels in walls and celing includining all necessary fixtures including cornice with necessary screws, priming coat on exposed surface etc., complete. Brand - Rait Wood
1034.12
1891
1956296.51
... More
Preparing newly prepared panneled surface for polishing by way of filling of putty , sealer and sand papering rubbing and applying hard polish,glossy polish in sequance over the prepared surface complete job
1034.12
65
68045.1
... More
PIPE INSULATION:
Supply and installation of High Quality self regulating heat tracer for Specialized Heating Solutions for Winterisation of water pipeline including all accessories complete including Supply and installation of Circuit Control Panel with RCBO MCB ,THERMOSTAT (0-120) DEG C, power connector-two way-6 sq.mm, w.p. splice connector,w.p. tee connector,end seal,mounting kit-w.p. jb,g.i. pipe strap 4",al. adhesive tape roll ( 50 mm w x 20 m l),f.g. adhesive tape roll (DANFOSS Make OR CHROMALOX any other approved brand as per the direction of Engineer-In-Charge)
250
2056
514062.5
... More
Supplying and fixing High Quality 32mm Thick Nitrile Insulation Tube for water pipeline of approved brand 2 Inch Size (Armaflex Class-o Armacell) , rockwool of apparent density 128 Kg/m3 on outer side of nitrile tube of 50mm thickness including alumunium duct clading (Alumunium Sheet Guage Thickness = 0.46MM TO 0.71MM )of approved quality and finish as per the direction of engineer in charge (Nitrile Tube 32mm Rock Wool 50mm Alumunium Duct Clading 0.46mm to 0.71mm)
250
493
123375
... More
Providing and fixing traditionally carved wood work (Shingstak) over doors and
windows including all accessories as per the direction of the Engineer in-charge,
complete with;
40
13745
549824.8
... More
Supply and installalation of Laminate Flooring high density fiberboard (HDF) 820KG/M3 Density Smooth Matt Finish 12MM THICK Single Click with U Groove having Abrassion Class AC4 manufactured by Embossed in Register (EIR) process including underflooring foam 4mm thick , skirting , reducer , T-Profile and Beeding All Complete job (Leben,
Robina or any other approved brand as per specification approved by engineer In charge )
192.74
1809
348763.03
... More
Supply installation testing and commissioning of Gyser 50ltr Capacity horizontally mounted of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete
1
20562
20562.5
... More
Supply installation testing and commissioning of Instant Gyser 15ltr Capacity of approved brand (Havells/Bajaj/Crompton or any othet approved brand as per engineer in charge including all fixtures , bolts all complete
2
7813
15627.5
... More
Supply , installation testing commissioning of CCTV IP based system for building security comprising of PTZ/fixed camera cabling, digital recording HD display screen with minimum display 5" x 8" per camera and hard ware software support complete
2
49350
98700
... More
Supplying, installation, testing and commissioning of grid interactive rooftop solar photo voltaic power generation system including space frame batteries etc
10
69912
699125
... More
Carriage of construction material:
Carriage of Cement by MT for avg 24KM
249.21
363
90587.84
... More
Carriage of Sand by MT for avg 10 KM
316.68
263
83454.68
... More
Carriage of Bajari by MT for avg 10 KM
619.66
263
163299
... More
Carriage of Stone by MT for avg 10 KM
58.47
310
18127.45
... More
Carriage of Steel by MT for avg 24 KM
64.94
363
23605.69
... More
Carriage of Wood by MT for avg 24 KM
12.4
363
4507.4
... More
Internal Electrification:
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
166
1069
177495.5
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
250
370
92530
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed conduit as required:
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
600
287
172728
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
440
312
137522
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
100
370
37012
... More
2 X 6 Sqmm + 1 x 6 sqmm
100
493
49350
... More
2 X 6 Sqmm + 1 X 6 Sqmm
100
493
49350
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 Module (75 mmX75 mm)
15
254
3824.7
... More
3 Module (100mmX75mm)
15
271
4071.45
... More
4 Module (125mmX75mm)
15
287
4318.2
... More
6 Module (200mmX75mm)
15
345
5181.75
... More
8 Module (125 mmX125 mm)
15
386
5798.7
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 A switch
102
82
8389.5
... More
3 pin 5/6 A socket outlet
18
123
2220.84
... More
15/16 A switch
18
139
2516.94
... More
6 pin 15/16 A socket outlet
18
156
2813.04
... More
TV antenna socket outlet
10
131
1316
... More
Bell push
15
123
1850.7
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
18
53
962.28
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
15
78
1172.1
... More
MCB:
supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
6 way , Double door
4
18506
74025
... More
8 way , Double door
2
2179
4359.26
... More
S/F Double door MCB distribution boards, 240V/415V, Sheet steel, Powder coated DB’s suitable for MCB’s fitted with Bus Bar, Neutral link, Earth Bar and Din bar of following no. of ways :
a) 6 Way (4 + 18), Double door TP&N
1
4194
4194.75
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
26
213
5560.1
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
4
41
164.52
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 Amps
4
370
1480.52
... More
Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 Amps
2
863
1727.26
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing RCCB ,10mA in the existing MCB BOX complete with connections, testing and commissioning etc. as required.
25 Amps
4
1727
6909
... More
Supplying and fixing following rating, FOUR pole, 415V, isolator in the existing RCCB ,30mA in the existing MCB BOX complete with connections, testing and commissioning etc. as required.
63Amp
4
2385
9541
... More
Providing and fixing danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
5
213
1069.25
... More
Earthing:
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
3
6991
20973.75
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required.
3
10692
32077.5
... More
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
5
1233
6168.75
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
5
477
2385.25
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed
conduit as required.
32 mm
500
131
65800
... More
25MM
650
106
69504.5
... More
Supply, installation,Testing & commissioning of Internal lighting fixtures:
Providing & Fixing of IP40 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Back lit SMD Mid Power LED Downlight with die-cast aluminum housing & Heat Sink for heat dissipation with UV Stabilized non yellowish Diffuser with internal/ external BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency 85% and in compliance to IEC standards. System Lumen efficacy of ≥ 120 lm / watt, THD 10 % ,p.f.≥0.95, CRI 80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) certificate / Report from OEM shall be submitted.
20W CEILING MOUNTED LED LIGHT
85
2015
171286.05
... More
15W CEILING MOUNTED LED LIGHT
30
1562
46882.5
... More
10W CEILING MOUNTED LED LIGHT
15
1398
20973.75
... More
10W LED MIRROR LIGHTS
10
1274
12748.8
... More
LED COVE LIGHTING 6 W / MTR
100
263
26320
... More
CEILING JUNCTION BOX
50
123
6168.5
... More
S/F of 1200mm sweep 3 blade energy efficient 5 star ceiling fan complete with assembling of blade down rod shackle insulator canopy etc including 2 module stepped type modular fan regulator.
10
2467
24675
... More
Supply installation/testing and commissioning of wall mounted fan having sweep 40mm 3 blade with completeaccessories
5
2632
13160
... More
S/F of exhaust fan shutter type of sweep 250mm in the existing opening, including making the hole to suit the above fan, making good the damage as required.
12
2220
26649
... More
Supply installation/testing and commissioning of LED flood light 50W with complete accessories
2
3290
6580
... More
TV WIRING:
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
200
123
24676
... More
Supply and laying of Cat 6 data cable existing conduit complete as required.
150
102
15421.5
... More
LT Panel:
SITC of 250 A Bus bar Chamber with Incomer MCCB and Circuit breakers having the following specification. TPN Aluminum Bus bar Size: 40mm x 10mm with color coded PVC Sleeves. (Take Bus-Bar Density:0.8A/mm2 ) Incomer 200 Amp 4P ,35KA MCCB: -----------------01 No. Outgoing: DP 63Amp 4P MCB TPN -----05 No
Voltage Amps frequency Digital meter 1 set
CT Ammeter 200 Amps 1 set
RY B Indication light 1 set
1
139825
139825
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%