Steel Industrials Kerala Limited Tender

Digital timer with panel board Supply and installation of outdoor stand mounted feeder pillar suitable for full control of luminaries. Supply and erection control box consist of 1 no. 25A, 2 pole MCB incomer, single dial 24 hours timer with charging facility and suitable contactor for automatic operation, suitable size connection cable from control panel to flood light fittings. Supply and fixing the following types of beading along the periphery of doors/other data cable compartments to make the panel assembly dust and vermin proof including sticking with glue A' section neoprene beading suitable for 1.60/2.00 mm sheet Supply and fixing the following accessories in the existing meter board and giving connections etc. 32A, 415V back lite fuse fitting 32A,415V,2 way neutral link mounted on DMC/SMC base. 20-32A,clip-on offset tag fuse link of size fl Supply and installation of following accessories suitable for 50Hz, AC supply conforming to IS 8828-1995/IEC 60898 of the following current ratings in the existing enclosure and giving connections of are required. 25A,2 pole,30mA RCCB 6 A to 25 A, 10 kA, DP MCB(C curve) 32 A, 2 pole,AC I rated power contactor with INO+INC auxiliary contactor& with AC coil 24 Hours timer for operating automatic ON-OFF function

Aluminium anodized danger notice board of size 150X100mm. With inscriptions (both in English and Malayalam) and conventional skull and bone in red colour.

1. Erection of above mast with suitable equipment and tools and with all labour cost 2. Earthing for above mast with 1.5mm copper pie and 3core wire Supply and providing plate earthing per IS 3043 WITH 300X300 mm GI earth plate supply and providing test join for the earthing system using 2Nos of the following size of strip following cutting and bending to shape, drilling necessary holes and fixed to the watering pipe etc as required, earth strip GI 25X3mm 4 feet copper plate rode grade 10 copper wire (panelboard bearthing Supply and providing test joint for earthing system using 2Nos of following size of strip including cutting and bending to shape, drilling necessary holes (in case of strip) and fixing firmly with plate test joined etc as required. 2x25x3mm GI strip. 3. Concrete foundation details: (a)footing-1mtr x 1mtr x 20 cm (b)column-50cm x 50cm x 60 cm 4. Installation of feeder pillar

Laying of cable supplying siemens/tropodur type nickel plated double compression brass cable gland for PVC insulated and PVC sheathed armouredaluminium /copper condactor cable 1.1 KV grade ,and making end termination suitable for 2 / 3/3 . 5/4 core cable of the following sizes as required. 10 sq mm Supplying and providing earth clamb for siemenstropodur type cable glants of suitable length and other dimensions noted along with each size of glands for the following sizes of the cables as required. 4 sqmm-16sqmm with 12mm wide x 1mm thick clip Supply of superior quality aluminium tubular cable socket and making core termination of cable of the following size including crimping etc as required.10 sq mm Supplying,laying and jointing of the following size of the double wall corurgateed(DWC) pipes made out of HDPE Conforming to IS 14930 part II for mechanical protction to underground power cable with all required accessories in hard soil 0.75mtr below ground level including excavation 40/32mm or nearest size.

Wiring of luminaries with 2.5mm 2 wiring materials