Southern Railway Tender

Protective coating of PSC slabs of bridges by means of epoxy painting with primer 3 coat, intermediate coat and top coat of IPN coating / CECRI integrated four cout system after surface preparation with contractor's material, paints, scaffolding, epoxy putty, high skilled labours, tools and plants, machineries, vehicles etc. and direced by the Engineer in charge of the work .

Protective coating of Substructure of bridges by means of epoxy coal tar paint like 4 SIKA Inertol Epoxitar or equivalent in two coats after surface preparation with contractor's material, paints, scaffolding, epoxy putty, high skilled labours, tools and plants, machineries, vehicles etc. And directed by the Engineer in charge of the work .

Loading of the pre cast PSC bridge slabs of 12.20 m s pan, RCC ballast retainers and 5 RCC through bed blocks as per the approved plan available at casting site to Railway's BFR or similar wagons by using sufficient capacity of Contractor's Crane and crew with out causing any damages to Railway structures as directed by the Engineer in charge of the work. All labour, tools and plants, crane, loading, leading, materials etc. complete by the contractor

Supply Ready Mixed Concrete ( RMC ) M 35 and Pre Casting of RCC through bed blocks as per approved plan to the required size using contractor's steel shutttering, compaction 6 using vibrators,curing etc. as per plan and specification including errecting in position as directed by the Engineer in charge of the work . All labour, materials including cement, steel rods, equipment , lead and lifts, tools & plants, consumables etc . Complete by the contractor. (70 % Payment only given after casting and balance 30 % after errecting )

Supply, Providing and fixing GRP Walk way Refugee Platform on the out side of Ballast retainer slab of existing Bridges including Supply and fixing of GRP platform structure connecting trolly refugees, with mounting brackets to bridge proper at 1500 mm c/c distance using SS 316 anchor fasteners duly drilling the bridge structure in the sides, with out affecting its design considerations, and through weep holes and additional holes by removing the ballast under traffic conditions during day or night as per the availability of taffic block and providing steel bolts of approved size as per drawing through the weep holes and additional holes provided in the bridge with 7 stainless steel plates on both sides of the weep holes and fixing the GRP Hand rails with the mounting 1 brackets provided, Laying the GRP Walk way over the frame in the specific arrangements provided and fixing the same to the frame with suitable locking arrangements/brackets etc. complete as directed by the Engineer in charge of the work . The rate quoted is including all costs for lighting , scaffolding , temporary platform arrangements for the safety of workers/ supervisors , cost of drilling , cost of SS bolts & nuts of approved diametre, length etc. and cleaning , laying net covering the span in work , to act as a catch for accidently falling labor, boat arrangements in lake area for the rescue if any required, hire charges for power supply arrangements required for the site, leading of materials from factory to site of work and leading the same to work spot etc. complete . The material supplied should confirm the specification mentioned in Drawing No. EC / PL / 16 / 10 / 1743 GA

Supply and using Cement at Worksite Ordinary Portland Cement 53 grade of approved brands/makes

Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more of approved brands/makes.