Southern Railway Tender

SW-III(a)AMPA-Construction of new tool room for track machine staff of dimension 5m x 11m

Providing and fixing 75mm dia PVC weepholes pipes including jointing and cost of spun yarn and sand etc. complete.(PVRD-400 & KRPP-400 )

(Pro. side pathway on Bridge No. 397)Supply, Providing and fixing GRP Walk way Refugee Platform on the out side of Ballast retainer slab of existing Bridges including Supply and fixing of GRP platform ( 1000mm width ) structure connecting trolley refugees, with mounting brackets to Bridge proper at 1500 mm c/c distance (or) as per approved drawing using SS316 anchor fasteners as per drawing duly drilling the bridge structure in the sides, with out affecting its design considerations, and through weep holes and additional holes by removing / scooping the ballast under traffic conditions during day or night as per the availability of traffic block and providing steel bolts of approved size as per drawing through the weep holes and additional holes provided in the bridge with stainless steel plates on both sides of the weep holes and fixing the GRP Hand rails of 1m height with the mounting brackets provided, Laying the GRP Walk way over the frame in the specific 8 arrangements provided and fixing the same to the frame with suitable locking arrangements / brackets etc. complete as directed by the Engineer in charge of the work . The rate quoted is including all costs for lighting, scaffolding, temporary platform arrangements for the safety of workers / supervisors , cost of drilling , cost of SS bolts & nuts of approved diametre, length etc. and cleaning, laying net covering the span in work , to act as a catch for accidently falling labor, boat arrangements in lake area for the rescue if any required, hire charges for power supply arrangements required for the site, leading of materials from factory to site of work and leading the same to work spot etc. complete. The material supply should confirm the specification mentioned in the Railway's approved Drawing and the work to be executed as per the Railway approved Drawing of the particular bridge. The detailed drawings with design calculations and specifications for anchors, support brackets, GRP Platform, Hand railing, etc shall be submitted by the firm and shall be got approved by CBE's office before execution of the work.

Providing health faucet near the EWC similar to model No. F8030401AB or similar 6 approved 1.2m branded hose pipe with built in pressure regulating nozzle to adjust flow rate for hygienic cleaning. Rate includes all fittings, fixing to line and commissioning for functionally without any damage to existing wall, pipe or fittings.(PVRD-2, KRPP-2 & AMPA- 2)

Manufacturing, supplying & fixing of prefabricated RCC coping stone of size 530mm x 1125mm x 100mm thick as per top face designed and approved by site Engineer with M-30 grade 3 RCC with 8 mm dia. tor steel at 150mm c/c both ways and manufactured by vibro compaction process using jointless FRP/GRP steel moulds of required size, shape & design. The item includes cost of cement, reinforcement, transportation etc. (Note : Under layer of cement mortar to be laid as per site conditions & should be paid for separately)(PVRD-330 & KRPP- 280)

Design and supply of structural drawing of proposed building along with design 5 calculation sheets for all R.C.C. works with approvd mix & Fe 500 Steel. The design and structural drawings to be prepared by the reputed structural design centre and to be checked and counter signed by any one of the Govt. Engineering collage - (b) For Super structure (above Plinth level) (PVRD-55, KRPP-20 & AMPA-55)

SW-I(a)PVRD-Construction of new tool room for track machine staff of dimension 5m x 11m.

Removing the existing ballast from the track to facilitate the construction of platform 2 wall etc and stacking at available locations near the track redumping the ballast after screening etc complete with all lead & lift and as directed by the Engineer in charge. All labur and materials by the contractor (PVRD-150 & KRPP-148)

SW-II(a)KRPP-Construction of new toilet block for track machine staff of dimension 5m x 4m

REINFORCED CEMENT CONCRETE // STEEL REINFORCEMENT // Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. // Thermo-Mechanically Treated bars of grade Fe-500D or more.

Supply of steel reinforcement of approved brands/makes for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more of approved brands/makes.

Design and supply of structural drawing of proposed building along with design 4 calculation sheets for all R.C.C. works with approved mix and Fe500 Steel. The design and structural drawings to be prepared by by the reputed structural design centre and to be checked and counter signed by any one of the Govt. Engineering collage (a) For foundation (Upto Plinth level)duly conducting soil investigation(PVRD-55, KRPP-20 & AMPA-55)