Roads And Bridges Development Corporation Of Kerala Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 1,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_RBDCK_290124_1Bid Award Id
ViewTender No
RBDCK/T220/CUSAT/23/2019Tender Authority
Roads And Bridges Development Corporation Of Kerala Limited ViewPurchaser Address
-Website
http://http://www.rbdck.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2.33.2 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyound 60 cm girth up to and including 120 cm girth
4
-
-
2.33.3 : Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth up to and including 240 cm girth
1
-
-
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
249.43
-
-
2.9.1 : Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.Ordinary rock
166.29
-
-
2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil
1014.64
-
-
2.7.1 : Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.Ordinary rock
676.43
-
-
2.26.1 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil
142.14
-
-
2.26.2 : Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.Ordinary or hard rock
57.16
-
-
50.2.25.1 : Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge
164.01
-
-
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
1138.53
-
-
CONCRETE WORKS
-
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
104.04
-
-
4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
1.7
-
-
4.11 : Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).
40.96
-
-
4.12 : Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification .
6718.9
-
-
4.13 : Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
40.96
-
-
R.C.C WORKS
-
-
-
od120943/2018_2019 : Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content considered in this item is @ 340 kg/cum. All work upto plinth level.
284.05
-
-
od120946/2018_2019 : Providing and laying in position machine batched, machine mixed and machine vibrated design mix M-30 grade cement concrete for reinforced cement concrete using cement content as per approved design mix including pumping of concrete to site of laying but, excluding the cost of centering, shuttering, finishing and reinforcement including admixtures in recommended proportion (as per IS 9103) to accelerate,retard setting of concrete to improve workability without impairing strength and durability as per direction of Engineer-in-Charge .Minimum cement content considered in this item is @ 340 kg/cum All work upto floor V level.
147.64
-
-
od120950/2018_2019 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete for all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.
39364.83
-
-
5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
271.2
-
-
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
701.8
-
-
5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform
397.21
-
-
5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
432.18
-
-
5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts
224.74
-
-
5.9.19 : Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edges
64.54
-
-
MASONRY WORKS
-
-
-
50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete
24.63
-
-
50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete
93.38
-
-
50.6.3.2 : Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete
8.2
-
-
6.15 : Extra for providing and placing in position 2 Nos 6 mm dia M.S bars at every third course of half brick masonry.
74.78
-
-
7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)
4.73
-
-
JOINERY
-
-
-
21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)
206.42
-
-
21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)
206.42
-
-
21.3.1 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
39.75
-
-
21.3.2 : Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
2.52
-
-
od120952/2018_2019 : Providing and fixing glazing with pin headed glass panes of 4.mm thickness in aluminium doors,windows,ventilator shutters,partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directon of Engineer-in-Charge at all levels
3.6
-
-
9.165.1 : Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.125 mm
28
-
-
9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
5
-
-
9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
5
-
-
od122867/2018_2019 : Providing and fixing Lever Handle of SS 304 Grade, Including sash lock with key.The rate shall includes the cost and conveyance of all materials, labour charges, lead, lift etc complete as directed by the Engineer in Charge at all levels
12
-
-
od122868/2018_2019 : Providing and fixing tower bolt of approved size in SS - 202 grade with necessary screws etc. complete including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by the Engineer in Charge
26
-
-
9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Second class teak wood
0.13
-
-
9.20.1 : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of I st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
6.3
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
46.4
-
-
9.122.1 : Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
13.44
-
-
9.102 : Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
63
-
-
od121443/2018_2019 : Providing and fixing S.S fan clamp of 16mm dia in RCC slabs, beams including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge at all levels.
5
-
-
9.53 : Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
18
-
-
od120958/2018_2019 : Supplying and fixing rolling shutters of approved make,made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets,side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2 and M.S top cover of required thickness for rolling shutters including two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, including cost and conveyance of all materials, labour charges,lead,lift etc complete as directed by Engineer in Charge at all levels. 80 X 1.25 mm M.S.Laths with 1.25mm thick top cover
11.76
-
-
10.7 : Providing and fixing ball bearing for rolling shutters.
6
-
-
STEEL WORKS
-
-
-
od120951/2018_2019 : Steel work welded in built up sections/framed work including cutting hoisting, fixing in position and applying two coats of approved make and colour synthetic enamel paint over two coats of approved make anticorrossive yellow zinc chromate primer, etc. including cost and conveyance of all materials, labour, lead,lift etc. complete as directed by Engineer- in-Charge at all levels: In gratings, frames, guard bar, ladders, railings, brackets, gates similar works.
837.45
-
-
FLOORING WORKS
-
-
-
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
112.9
-
-
11.37 : Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.
317.27
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
49.61
-
-
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
6.56
-
-
11.4 : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
57.01
-
-
11.6.1 : Cement plaster askirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement .18 mm thick
3.02
-
-
11.20.4 : Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand).Ordinary cement without any pigment
75.16
-
-
FINISHING WORKS
-
-
-
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
324
-
-
13.1.2 : 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).
1510
-
-
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
846
-
-
13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
366
-
-
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
557
-
-
od120955/2018_2019 : Providing and applying 2 coats an acrylic polymer modified elastomeric cementitious water proof coating which shall be mixed as per manufacture's technical specification in sunken slab, etc after thoroughly cleaning the surface by making it free of any loose mortar,unsound substrate,, filling the joints of slab/wall on the external face with CM 1:3 mixed with approved water proofing compound in the proportion recommended by the manufacturers , cracks in the slab (if any), pressure grouting wherever necessary by injecting mixed with approved expanding agent using pressure grouting pump with a pressure of 3 to 4kg/sqm ,strictly maintaining the coverage specified by the manufacturer, including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer-in-Charge .(The above work shall be carriedout by an agency having sufficient experience in membrane water proofing and should ensure a guarantee of 5 years. Only skilled and experienced persons shall be employed for this purpose.)
502.83
-
-
13.10 : 15 mm cement plaster 1:3 ( 1 cement :3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall.
502.83
-
-
MISCELLANEOUS WORKS
-
-
-
od120949/2018_2019 : Providing and applying Antitermite treatment by injecting chemical emulsion Imidacloprid emulsiable concentrate (contentration by weight percent 0.075) for pre-constructional treatment and creating a chemical barrier conforming to IS 6313 (Part II latest) for wall trenches, foundation, top surface of plinth filling, foundation of wall and floor, along the external perimeter of the building, etc. complete as per manufacturers specification and as directed by the Engineer-in-Charge. (Plinth area only to be measured for the payment )
140
-
-
22.4.1 : Providing and Placing in position suitable PVC water stops conforming to IS : 12200 for construction / expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete:Serrated with central bulb ( 225 mm wide, 8-11 mm thick)
286
-
-
SWIMMING POOL FINISHES
-
-
-
od120944/2018_2019 : Pool finishes including water proofingWaterproofing: Providing and applying water proofing treatment to the swimming pool using Mapelastic Smart (or Equivalent) Highly flexible cementitious polymer modified system 2mm crack bridge capacity including materials Mapenet 150, Mapegel 50, Mapesil AC, Mapeband TPE (or Equivalent ) as per the specification, after necessary surface preparation includingpressure grouting if required, Pool finish: Supply and fixing of ceramic tile with Mapei adisilex P10 & isolastic or equivalent, joint fillingwith Mapei Kerapoxi grout or equivalent.
1
-
-
8.3.2 : Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer -in-Charge.Granite work
75.4
-
-
8.2.1.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
3.78
-
-
8.5 : Extra for providing opening or required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
8
-
-
8.13.1 : Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye orequivalent.
37.7
-
-
TRUSSLESS ROOFING SHEET
-
-
-
od120945/2018_2019 : Providing and Fixing Colour coated galvalume sheet for trussless roofing system of BMT 1 mm, APT 1.05mm and Tolerance 0.2mm . The panel width is 600-650mm after fabrication. Fabrication to be done using MIC 240 automated building mechanically operated machine.
910
-
-
od120947/2018_2019 : Supply and fixing of combo-modules of, 2 mm thick transparent polycarbonate skylights of size 2ft x 14ft and 24" dia aluminium wind-operated turbo-ventilators of capacity 2400 CFM @ 10 mph. Each module to be installed at a distance of every 20 ft. along the length of the building.
6
-
-
CAR PARKING SPACE
-
-
-
16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
230
-
-
16.78.2 : Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBRValue-25
20
-
-
16.69 : Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature jointed with cement mortar 1:3 ( 1 cement : 3 coarse sand) , including making joints with or without grooves ( thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge ( length of finished kerb edging shall be measured for payment ). ( Precast C.C. kerb stone shall be approved by Engineer-in-Charge)
18.19
-
-
Rain Water Sump
-
-
-
5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
0.24
-
-
13.44.1 : Finishing walls with water proofing cement paint of required shade:New work (Two or more coats applied @ 3.84 kg/10 sqm)
289
-
-
50.18.9.10.1 : Providing and fixing PVC pipes includings jointing of pipes with one step pvc solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer in Charge. 150 mm dia 6 Kgf/cm2
120
-
-
Landscaping Works
-
-
-
30.2.2 : Supplying and stacking of good earth at site including royalty and carriage upto 5 k.m. lead complete (earth measured in stacks will be reduced by 20% for payment).
1
-
-
od120948/2018_2019 : Supplying river sand brought from outside including transportation,loading, unloading ,taxes etc complete as directed by the Engineer- in- charge
1
-
-
30.2.4.1 : Supplying and stacking at site dump manure from approved source, including carriage upto 5 k.m. lead complete (manure measured in stacks will be reduced by 8% for payment) :Screened through sieve of I.S. designation 20 mm
1
-
-
30.2.8 : Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately).
3
-
-
30.2.9 : Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge
3
-
-
30.2.14.3 : Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 60 cm dia, and 60 cm deep
20
-
-
30.2.33 : Providing and fixing Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and even, watering with sprinkler
100
-
-
od120953/2018_2019 : Supplying and planting healthy plants of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge.
10
-
-
od120954/2018_2019 : Supplying and planting healthy plants of Lagerstroemia flosreginae of height 150-165 cm.in big poly bag of plants size 25 cm of appropriate growth including necessary maintenance of the plants (as and when required) at site as directed by Engineer-in-Charge.<br>
10
-
-
2.32 : Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.
65
-
-
5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide
9.6
-
-
19.18.3 : Supplying and fixing C.I with out frame for manholes:560 mm diameter ( heavy duty) the weight of the cover to be not less than 108 kg
2
-
-
od108076/2018_2019 : Providing and constructing soak pit 1.5 m x 1.5 m x 1.5 m size with honey comb brick work on the sides upto a height of 0.9m and brick masonry in CM 1:6 for the balance height, providing and filling brick bats graded, upto a height of 1.2 m, providing and laying precast slab over the pit supporting on the brick work, including cost and conveyance of all materials, labour charges, lead, lift, etc. complete as directed by the Engineer-in-charge.
1
-
-
PLUMBING WORKS
-
-
-
50.18.8.3.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 10kgf /cm2
75
-
-
50.18.8.4.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm2
12
-
-
50.18.8.5.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. concealed work, including cutting chases and making good the wall etc. 40 mm pipe 10 kgf/ cm2
6
-
-
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
2
-
-
18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
2
-
-
18.17.5 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore
1
-
-
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
2
-
-
18.17.1 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore
2
-
-
18.17.1A : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20 mm nominal bore
2
-
-
50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall
24
-
-
50.18.9.18.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 4 Kfg/cm2 - External work - Exposed on wall
12
-
-
50.18.9.9.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2
60
-
-
od105219/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 150mm
4
-
-
od105220/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm
5
-
-
od105221/2018_2019 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 100mm
2
-
-
od105222/2018_2019 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer in Charge. 150mm
1
-
-
18.19.3.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreHorizontal
2
-
-
18.19.4.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal boreHorizontal
2
-
-
18.19.5.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):65 mm nominal boreHorizontal
1
-
-
od105223/2018_2019 : Supplying and fixing CI foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. 40mm
2
-
-
od105224/2018_2019 : Supplying and fixing CI foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels. 50mm
2
-
-
od105225/2018_2019 : Providing and fixing enclosed type water meter (bulk type) 50mm dia conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber etc. (The tail pieces if required will be paid separately) including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge.
1
-
-
od105226/2018_2019 : Providing and fixing C.I. basket type dirt box strainer for bulk type water meter with nuts, bolts etc. complete conforming to IS:2373, including cost and conveyance of all materials, labour etc. complete and as directed by Engineer-in-Charge
1
-
-
19.6.4 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:300 mm dia R.C.C. pipe
12
-
-
19.6.5 : Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement : 2 fine sand) including testing of joints etc. complete:450 mm dia R.C.C. pipe
12
-
-
50.18.8.2.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2
36
-
-
od106819/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge.: 80mm Dia
2
-
-
od106820/2018_2019 : Supplying and fixing of CI double flanged wall casting pipe with puddle, 0.6m length including cost and conveyance of all materials,labour charges,making good the walls etc complete as directed by the Engineer-in-Charge.65mm Dia
2
-
-
od106821/2018_2019 : Supplying and fixing of CI single flanged wall casting pipe with puddle, 0.6m length as per the direction of Engineer in charge 200mm dia
3
-
-
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
12
-
-
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
18
-
-
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
12
-
-
18.9.7 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching , refilling & testing of joints complete as per direction of Engineer- in-Charge. External work62.50 mm nominal inner dia pipes
50
-
-
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
36
-
-
50.18.8.8.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 75 mm pipe 6 Kgf/cm2
54
-
-
50.18.8.9.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chased and making good the wall etc. 110 mm pipe 6kgf/cm2
18
-
-
50.18.9.8.1 : Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 75 mm dia 6 Kgf/ cm2
30
-
-
50.18.9.19.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall
24
-
-
od107714/2018_2019 : Supplying and fixing of activated carbon filter of 800 mm dia x 1500 mm height, comprising of: Vertical ,welded mild steel pressure vessel complete with dished ends and internally coated with epoxy paint. The vessel complete with manhole and cover shall be painted externally with bituminous paint. Rate to be inclusive of set of internals for the above comprising of raw water distributor and filter water collecting system, set of frontal pipe work of mild steel construction complete with vent piping, set of mutually operated multiport valves, set of inlet and outlet pressure guages, etc complete including cost and conveyance of all materials,labour charges,lead ,lift etc as directed by the Engineer in charge at all levels: Capacity:5 m3/hour ; Head:35m
1
-
-
od107715/2018_2019 : Supplying and fixing of pressure sand filter of 600 mm dia x 1200 mm height,comprising of Vertical ,welded mild steel pressure vessel complete with dished ends and internally coated with epoxy paint. The vessel complete with manhole and cover painted externally with bituminous paint. Rate inclusive of set of mutually operated multiport valves, set of internals for the above comprising of raw water distributor and filter water collecting system, set of frontal pipe work of MS construction complete with vent piping, set of inlet and outlet pressure guages, set of inlet and outlet sample valves etc complete including cost and conveyance of all materials,labour charges,lead, lift etc as directed by the Engineer in charge at all levels.Capacity- 5 m3/hrHead- 35 m
1
-
-
od107717/2018_2019 : Providing and fixing heavy duty Cast Iron Manhole covers including cost and conveyance of all materials,labour charges,lead,lift etc complete as directed by Engineer in Charge. ;600x600mm
6
-
-
19.7.1.1 : Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand) with R.C.C. top with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size,) inside plastering 12 mm thick with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design:Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weigh of cover 23 kg and weight of frame 15 kg):With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
6
-
-
od107718/2018_2019 : Supplying approved make PVC gully trap of size 160 x 110mm and CI grating 150mmx150mm size and light duty C.I cover with frames 300mmx300mm size(inside) the weight of cover to be not less than4.5kg and frame to be not less than2.7kg (CI MH cover and frame as per IS:1726) single sealed of size conveying to size the above mentioned items and constructing 30cmx30cm internal size gully trap chamber and depth upto 60cm,115 thk brick wall in CM 1:6 on a foundation of PCC 1:4:8.100mm thick plastering inside with CM 1:3,12mm thk with a neat cement flushing coat and conveying to site,cleaning ,installing and testing approved make PVC gully trap with 160mm outlet(Fabricated),surrounding with CC 1:1.5:3, 150x150mmm,top with CI grating above the PVC gulley trap and light duty CI cover and frame over the chamber including cost of all materials, etc complete as per approved drawing and as directed by Engineer-in- Charge.
2
-
-
od107719/2018_2019 : Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts,pressure guage and all accessories. and working with 415V, 3ph and 50 Hz frequency including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels. Head 35m, Capacity-5 m3/hr
2
-
-
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
3000
-
-
od107722/2018_2019 : Supplying and fixing of centrifugal pump, with CI construction, CI impeller complete with motor, base plate, foundation bolts, nuts,pressure guage and all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer in charge at all levels: Capacity :5m3/hr. Head : 15m
2
-
-
od107776/2018_2019 : Providing and fixing CI vent cowl as directed by the Engineer in Charge at all levels 80 mm dia
8
-
-
od109021/2018_2019 : Supplying ,fixing, testing and commissioning of portable drainage pump with 12mm ;solid handling, with stainless steel construction, stainless steel impeller complete with motor , with carrying;handle and all accessories and working with 415V, 3ph and 50 Hz frequencyCapacity:10m3/hour,Head-15m
1
-
-
SANITARY FIXTURES
-
-
-
17.3.1 : Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid
4
-
-
50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
4
-
-
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
8
-
-
od105203/2018_2019 : Providing and fixing coloured vitreous china counter bottom wash basin 470 mm or nearest size of approved make including one CP brass pillar cock 15 mm NB including connecting pipes with all fittings 32 mm dia rubber plugs 32 mm dia CP brass waste coupling, 32 mm dia CP brass bottle trap, 15mm CP brass angle valve, etc. complete as directed by the Engineer-in-charge. (The purchase price considered for washbasin is Rs.1580, pillar cock is Rs.1100,bottle trap is Rs 1050,angle valve is Rs 550 and any deviation plus or minus in the purchase price will be adjusted in the price quoted).
8
-
-
od105205/2018_2019 : Providing and fixing floor trap with cockroach trap (multi trap), concealed or exposed, SS304 grade floor grating with cup including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the directed by the Engineer-in-Charge at all levels
15
-
-
od105211/2018_2019 : Providing and fixing frameless mirror, with all four edges machine polished and back side protected with safety film and 4 mm thick Plywood backing and fixed on walls with mirror screws. The rate includes lifting, cutting, labour charge etc. as per design and drawing. (The purchase price considered is Rs 3200/- any deviation plus or minus in the purchase price will be adjusted in the price quoted.)
4
-
-
50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
4
-
-
50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
8
-
-
od105216/2018_2019 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame Round Frame with Flat Round Cover with Rubber Seal SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer-in-charge at all levels. 110mm Dia
2
-
-
od105217/2018_2019 : Providing and fixing Cleanout with Spigot, with SS 304 Square Frame Round Frame with Flat Round Cover with Rubber Seal SS Screw including cost and conveyance of all materials, labour charges, sundries etc complete as directed by the Engineer-in-charge at all levels. 75mm Dia
2
-
-
od105262/2018_2019 : Providing and fixing premium quality C.P. brass overhead shower and wall flange of approved make and model including cost of all materials, labour etc., complete as directed by the Engineer-in-Charge at all levels.
4
-
-
od109040/2018_2019 : Supplying and fixing approved quality white vitreous china urinal division plate 700 x 340 or nearest size including cost and conveyance of all material, labour charge, lead, lift, all taxes etc. complete as directed by the Engineer-in-Charge at all levels.
7
-
-
od109041/2018_2019 : Providing , fixing of star white vitreous china flat back urinal with urinal flush valve, of approved size with all accessories to provide satisfactory functioning including necessary wall cutting / chasing and making good, as required for urinal flushing etc complete, testing and commissioning to the satisfaction of Engineer in Charge as per direction of Engineer-In charge at all levels. The cost shall include cost of flush valve, necessary CP flush pipe, CP drain, spreader and all required connections
7
-
-
18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 8931 15 mm nominal bore
8
-
-
PLANT ROOM EQUIPMENTS
-
-
-
od105175/2018_2019 : Sand Filter: Supplying, fixing, testing and commissioning of totally anti-corrosive FRP high density laminated filter,corrosion proof,environmental safe.Unitized thermal plastic filter tank tough,durable,and suitable for many different weather condition 1200mm size ,in/out 3 inch with flanged connections of required size and required filter media and fitted with pressure gauge panel,manual air bleeder ,water drain and emptying plug ,fitted with collector arms and diffuser made from unplasticized PVC and polypropelene. Filtration capacity 40m3/hr/m2, maximum working pressure 2.5 kg/cm2, flow rate 560000 litres/hr MAKE: voltech/astral/certikin/Pentair/Aquastar
2
-
-
od105182/2018_2019 : MULTI - PORT VALVE:- Supplying to site and fixing in position, side mounted 6 - way PVC Multi - port Valve for the filter unit and size 3 inch to carry out different functions in a hydraulic circuit assuring perfect water tightness . Made in ABS with connections including supports, brackets etc., complete. Work to be executed as per the directions of the Engineer - in - charge. MAKE: voltech/astral/certikin/Pentair/Aquastar or equivalent
2
-
-
od105186/2018_2019 : Supplying and installing filter media -silex sand 0.5-.8mm (Silica sand) inclusive of all material, transportation and labour charges. Work to be executed as per the directions of the Engineer - in - charge.
2000
-
-
od105192/2018_2019 : RE - CIRCULATING PUMP: Self priming low noise pump, with Built in Pre - Filter with Removable strainer in thermo plastic , mechanical seal, CI impeller,Power 5 HP, Flow rate 56m3/hr @ 10m head Rate inclusive of all material, transportation and labour charges. Work to be executed as per the directions of the Engineer - in - charge. MAKE: voltech-spain/astral/certikin/Aquastar or equivalent
3
-
-
od105199/2018_2019 : CHEMICAL DOSER WITH CHEMICAL TANK: Supplying, installation, testing and commisioning of chemical dosing pump with chemical tank. Make E-dose or equivalent Flow rate 10lph,HDPE tank 100ltr capacity.
1
-
-
od107707/2018_2019 : AUTOMATIC PANEL BOARD
Providing and fixing motor control center in the plant room, manufactured from powder coated CRCA sheets for the pump sets for filtration systems complete with necessary starters, switch gear, indicators , lamps , push button (Type ON /OFF switches ), fuse units incoming bus internal cabling underwater light transformers etc. Confirming to the requirements of the kerala inspectorate (Contractor shall provide cabling as per electrical inspectorate norms.
1
-
-
od108969/2018_2019 : Supplying & filling water in the pool for installation, testing ,and commissioning including the cost of water, conveyance etc. including start up chemicals complete as per the directions of the Engineer in charge
1
-
-
BASIN EQUIPMENTS
-
-
-
od105176/2018_2019 : FLOOR INLET: Supplying, installation, testing and commissioning floor inlet with regulable flow made in ABS with SS screws. The rate is inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin/Aqua/Pentair or equivalent
18
-
-
od105183/2018_2019 : SUCTION INLET / VACUUM POINT: Supplying, installation, testing and commisioning suction inlet in ABS with cap internal thread of 1.5 inch dia and external thread 2inch etc complete,rate inclusive of all material,transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin/Aqua/Pentair or equivalent
4
-
-
od105187/2018_2019 : Supplying, installation, testing and commissioning overflow grating in ABS, top of grating features an antislip finish etc complete,rate inclusive of all material,transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin/Aqua/Pentair or equivalent
52
-
-
od105193/2018_2019 : Supplying, installation, testing and commissioning wall conduits ,rate inclusive of all material,transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin/Aqua/Pentair or equivalent
16
-
-
od105200/2018_2019 : POOL DRAIN: Supplying to site and fixing in position, ABS Square Main Drain(300 x 300 mm) with frame and back cover in ABS . Rate inclusive of all material, transportation and labour charge. Work to be executed as per the directions of the Engineer - in - charge. MAKE: voltech-spain/astral/certikin/Aqua/pentair or equivalent
6
-
-
od105206/2018_2019 : Gutter Drain: Supplying to site and fixing in position Gutter drain in ABS . Rate inclusive of all material, transportation and labour charge. Work to be executed as per the directions of the Engineer - in - charge. MAKE: voltech-spain/astral/certikin/Aqua/Pentair or equivalent
20
-
-
od105210/2018_2019 : POOL LADDER: Supplying to site and fixing in position ladder in SS 304 handrails dia 43mm SS non slip safety steps provided with anchoring fixtures No of threads 4 Rate inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: S tech or equivalent
4
-
-
MAINTENANCE EQUIPMENTS
-
-
-
od105177/2018_2019 : MAINTENANCE EQUIPMENT: Vacuum Head: Supply & installation of vacuum head in polished Aluminium and 1.5 inch connection with rails via handle. Rate inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin /Aqua/Pentair or equivalent
1
-
-
od105184/2018_2019 : Supplying to site and fixing in position floating suction plastic vacuum hose 35 meters long including hose cuffs for connection to suction inlets Rate inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin /Aqua/Pentair or equivalent
1
-
-
od105188/2018_2019 : Supplying to site and fixing in position Aluminium telescopic handle 9 metre Rate inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin /Aqua/Pentair or equivalent
1
-
-
od105194/2018_2019 : Supplying to site and fixing in position Leaf skimmer Deep bag Rate inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin /Aqua/Pentair or equivalent
1
-
-
od105201/2018_2019 : Supplying to site and fixing in position straight brush with nylon bristles Rate inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin /Aqua/Pentair or equivalent
1
-
-
od105204/2018_2019 : Supplying to site and fixing in position Chlorine/pH test kit Rate inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: voltech-spain/astral/certikin /Aqua/Pentair or equivalent
1
-
-
od105209/2018_2019 : Supplying to site and fixing in position water balancing chemicals for initial start up of pool Rate inclusive of all material, Transportation and labour charges. Work to be executed as per the directions of the Engineer- in - charge. MAKE: Astral/certikin /Aqua/Pentair /Sanwe or equivalent
1
-
-
INTERCONNECTING PIPING, FITTINGS, VALVES ETC
-
-
-
od105189/2018_2019 : Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes 10kg/cm2 with PN 16 grade heavy duty fittings complete with all heavy duty PVC fittings and adaptors pasted using approved solvent cement & testing to a holding pressure of 5kg/cm2 for a period of 6 hours including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge. 20mm dia
170
-
-
od105195/2018_2019 : Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes 10kg/cm2 with PN 16 grade heavy duty fittings complete with all heavy duty PVC fittings and adaptors pasted using approved solvent cement & testing to a holding pressure of 5kg/cm2 for a period of 6 hours including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge. 50mm dia
140
-
-
od105202/2018_2019 : Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes 10kg/cm2 with PN 16 grade heavy duty fittings complete with all heavy duty PVC fittings and adaptors pasted using approved solvent cement ; testing to a holding pressure of 5kg/cm2 for a period of 6 hours including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge. 65mm dia
120
-
-
od105207/2018_2019 : Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes 10kg/cm2 with PN 16 grade heavy duty fittings complete with all heavy duty PVC fittings and adaptors pasted using approved solvent cement testing to a holding pressure of 5kg/cm2 for a period of 6 hours including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge.: 80mm dia
400
-
-
od105208/2018_2019 : Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes 10kg/cm2 with PN 16 grade heavy duty fittings complete with all heavy duty PVC fittings and adaptors pasted using approved solvent cement testing to a holding pressure of 5kg/cm2 for a period of 6 hours including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge.100mm dia
220
-
-
od105212/2018_2019 : Supplying and fixing GM foot valve with all accessories including cost and conveyance of all materials,labour charges etc complete as directed by the Engineer -in - charge at all levels: 110mm dia
2
-
-
od105213/2018_2019 : Supplying and fixing Flanged, wafer design multi-directional, 3 inch NRV with body made in SGI, disc in SGI, seat in nitrile. Make: Zoloto, Leader or equivalent.
3
-
-
od107569/2018_2019 : Supplying, laying, jointing, testing and commissioning to the satisfaction of Engineer in charge of hard PVC pipes 10kg/cm2 with PN 16 grade heavy duty fittings complete with all heavy duty PVC fittings and adaptors pasted using approved solvent cement testing to a holding pressure of 5kg/cm2 for a period of 6 hours including cutting and making good the walls,testing the lines rectifying any leakages or defects,etc. complete for soil, waste, rain water,drains, vent pipe, etc. concealed or open at all levels including cost and conveyance of all materials, labour charges, sundries etc complete for concealed work as directed by the Engineer- in-Charge.150mm dia
30
-
-
od107577/2018_2019 : Supplying, fixing at site in position brass butterfly valves 2.5inch size of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge
4
-
-
od107578/2018_2019 : Supplying, fixing at site in position butterfly valves 2 inch size of approved make at all levels including cost and conveyance charges as per the instructions of the Engineer-in -charge
16
-
-
od107710/2018_2019 : Supplying and fixing at site in position as per requirement Armoured cable for connections from distribution panel to the control panel as per the specification of the plant
340
-
-
SWIMMING POOL COMPETITION EQUIPMENT
-
-
-
od105178/2018_2019 : Supplying and fixing starting blocks for competition pools, adjustable platform in polyester and fibre glass with non slip finish 500 mm x 500 mm etc complete with fixing polished finish with height 700 mm as directed by the Engineer -in - charge at all levels.
5
-
-
od105179/2018_2019 : Supplying and fixing float lines supplied with floats and stainless steel 6mm cable and hook length 25m as directed by the Engineer -in - charge at all levels.
4
-
-
od105190/2018_2019 : Supplying and fixing false start indicators comprise of 2 posts in SS 316 (line with pulley and quick release cord) height 1.8m as directed by the Engineer -in - charge at all levels.
1
-
-
od105196/2018_2019 : Supplying and fixing safety accessories like Life buoy etc complete as directed by the Engineer -in - charge at all levels.
3
-
-
od105198/2018_2019 : Supplying and fixing back stroke turn indicators comprise of 4 posts in SS 316 etc complete as directed by the Engineer -in - charge at all levels.
1
-
-
od107713/2018_2019 : Supplying. providing and fixing in position SS304 Cup Anchor with bar including cost and conveyance as per the instructions of the engineer in charge
10
-
-
LT PANEL BOARDS AND ACCESSORIES
Supply, installation, testing and commissioning of outdoor energymeter box of cubicle construction made from 16SWG CRCA sheet suitable for accomodating one number of TOD meter with CTs and 3 Nos of 100A HRC fuses, 100 A FP isolator and neutral link, interconnections, providing necessary supports made from the same gauge CRCA sheet to fix energymeters, etc.The cubicle shall be provided with hinged door construction and vision panel for the meter compartment. Suitable knock out for cable entry and exit shall be provided. The entire board shall be painted with 2 coats of synthetic enamel paint over a coat of zinc chromate primer etc as required including fixing it on wall, making good the damages colour washing etc. as required.
1
-
-
CABLES AND CABLING
Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.
-
-
-
3.5C 70 Sq. mm Al
42
-
-
4C 16 Sq. mm Al
11
-
-
4C 6 Sq.mm Al
11
-
-
4C 4 Sq.mm Al
32
-
-
4C 2.5 sqmm Cu
21
-
-
3C 4 Sq.mm Al
42
-
-
3C 2.5 sqmm Cu cable
174
-
-
3C 2.5 sqmm Submersible Cu cable
10
-
-
2 C 6 Sq mm Al
6
-
-
2 C 2.5 Sq mm Cu
147
-
-
Supplying and making end termination with brass double compression gland and aluminium/Copper lugs for following size of XLPE insulated PVC sheathed aluminium/copper conductor cable of 1.1 kV grade as required.
-
-
-
3.5C 70 Sq. mm Al
2
-
-
4C 16 Sq. mm Al
4
-
-
4C 6 Sq.mm Al
4
-
-
4C 4 Sq.mm Al
12
-
-
4C 2.5 sqmm Cu
8
-
-
3C 4 Sq.mm Al
8
-
-
3C 2.5 sqmm Cu cable
32
-
-
2 C 6 Sq mm Al
2
-
-
2 C 2.5 Sq mm Cu
6
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Cable size upto 35sq mm
217
-
-
Above 35 sq.mm upto 95 sq.mm
7
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 35 sq. mm
5
-
-
Above 35 sq.mm upto 95 sq.mm
25
-
-
Laying of one number additional PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 35 sq. mm
5
-
-
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Upto 35 sq. mm
161
-
-
Above 35 sq. mm and upto 95 sq. mm
10
-
-
Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
56
-
-
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required
-
-
-
40mm
10
-
-
50 mm
80
-
-
80 mm
10
-
-
Providing, laying and fixing following dia RCC pipe NP 2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc. as required.
-
-
-
100 mm dia
10
-
-
Supply, fabricating and installing MS items such as Tees/ angles/ channels etc. on floor/ ceiling/ wall including necessary civil work such as grouting, finishing etc. and painting with two coats of primer and two coats of synthetic enamel paint as required
20
-
-
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
3
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
150 MM WIDTH X 50 MM DEPTH X 1.6 MM THICK
40
-
-
WIRING AND ACCESSORIES
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.(Note:The total distance from the DB/switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item Circuit wiring)
49
-
-
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.. (Note:The total distance from the switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item circuit wiring)
1
-
-
Group controlled light point with 1.5 sq. mm wire - Wiring for Group controlled light point (from one point to another point) with 3X 1.5 sq. mm PVC insulated, (FRLS), copper conductor cable in surface/recessed mounted rigid medium class 20mm PVC conduit with all accessories as required.. (Note:The total distance from the DB/switch box to the point will not exceed 5mtr, incase if length increases above 5 metres, the wiring shall be measured under item Circuit wiring)
19
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
274.8
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
195.6
-
-
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
258
-
-
Supplying and fixing stepped type electronic fan regulator with modular plate & cover on surface or in recess, including proving and fixing suitable size GI box,inter connection etc as required complete.
3
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
6
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
16
-
-
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
-
-
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
30
-
-
25 mm
30
-
-
32 mm
20
-
-
Supplying and fixing following polycarbonate cable junction boxes made of having IP67 protection with suitable numbers of entry/exit outlets for cable to terminate through glands/membrane as directed by engineer in charge and make necessary connections and accessories as required complete.
-
-
-
3 way junction box for 3CX2.5sqmm copper cable (Make: Hensel DK 0404 G or equivalent approved make)
16
-
-
MCBs AND MCB DISTRIBUTION BOARDS
Supplying and fixing following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision of 100 amps TP 16 KA MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
8 Way TP
1
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4way (8 + 12), Double door
2
-
-
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
4 way (8 + 12), Double door
1
-
-
6 way (8 + 18), Double door
1
-
-
Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
100 Amp,16KA,FP MCCB
1
-
-
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way, Double door
1
-
-
Supply and fixing of following rating residual current circuit breaker with MCB having earth leakage and overload protection (RCCB+MCB) as per specification as required
-
-
-
4 pole 40 amps. (415 Volts),100mA sensitivity.
2
-
-
4 pole 25 amps. (415 Volts), 30mA sensitivity.
2
-
-
2 pole 25 amps. (230 Volts), 100mA sensitivity.
1
-
-
2 pole 25 amps. (230 Volts), 30mA sensitivity.
1
-
-
Supply and fixing of following rating, 10 KA, Miniature Circuit Breakers as required.
-
-
-
6A to 32A, SP, C-CURVE
34
-
-
6 A to 32 A TP MCB, C-CURVE
14
-
-
40A TP MCB, C - CURVE
2
-
-
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
20
-
-
Supply and fixing outdoor type START/STOP (2way) push button station (IP65) including all the necessary accessories as required complete with suitable mounting arrangement.(Cat No Hensel-PBS 0201 or equivalent approved make)
7
-
-
Supply, Installation, Testing & Commissioning of following isolator in suitable CRCA steel enclosure duly painted with powder coated finishing on surface including all the mounting accessories, internal wiring, etc as required complete. Enclosure : Siemens 8GB32100RC04 or L&T DBENC004SD or equivalent approved make
-
-
-
32A, 4P
7
-
-
Supply installation, testing and commissioning of DOL starter upto 5HP for 3ph motor including auxilliary contactors, capacitors of required ratings, Single phase prevention, short cicuit and overload protection and all necessary accessories as required complete. Make:siemens 3TW72911A.xx or equivalent approved make
7
-
-
LIGHT FIXTURES AND FANS
Supply of indoor decorative surface mounted LED Batten with Extruded aluminium housing and Polycarbonate Diffuser ,along with driver,system wattage of 20+/-2 Watts (single lamp) ,lumen output of lamp not less than 1900 lumen, power factor = 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than or equal to 95 lumen/watt, cool day light and including all the necessary accessories as required complete.Make:- Cat No: LT Wand WO1857S000 or equivalent approved make
16
-
-
Supply of indoor surface mounted LED Batten with Polycarbonate housing and Polycarbonate Diffuser ,along with driver,system wattage of 20+/-2 Watts (single lamp) ,lumen output of lamp not less than 1700 lumen, power factor = 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than or equal to 95 lumen/watt, cool day light and including all the necessary accessories as required complete.Make:- Cat No: Wipro LL20-221-XXX-65-NE or equivalent approved make
13
-
-
Supply of indoor industrial surface mounted LED tube with Batten along with driver , surge protector,system wattage of 40+/-4 Watts(2x20 watts),lumen output of lamp greater than 3600 lumen, power factor 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 90lumen/watt and including all necessary accessories as required complete.Make:- Cat No: Wipro WIO922208 + 2 Nos. of LL13-181-65-T5 or Crompton Greaves IGP132LT8-16+LTT8-16 or equivalent approved make
4
-
-
Supply of indoor decorative surface mounted LED Batten with Polycarbonate housing and Polycarbonate Diffuseralong with driver,system wattage of 10+/-2 Watts,lumen output of lamp greater than 850, power factor = 0.9,rated life of L70 @ 50,000 hours, system efficacy greater than 95lumen/watt, cool daylight and including all the necessary accessories as required complete.Make:- Cat No: Wipro LL20-111-XXX-65-NE or equivalent approved makes
8
-
-
Supply of LED highbay/Midbay with high pressure die cast aluminium housing,along with driver,system wattage maximum of 80+/- 10 Watts,lumen output of lamp greater than 8000 lumens, power factor 0.9,rated life of L70 @ 50,000 hours. system efficacy greater than 100 lumen per watts including all necessary accessories as required complete.Make:-Lighting Technologies Eterne E080571M00 or equivalent approved make
12
-
-
Supply of 9+/-2w LED Bulkhead fitting with die cast aluminium housing, PC diffuser and IP65,IK08 Protection suitable for operation on 230V 50Hz AC, wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire and making good the surface as required. (Make: Philips :Vistaglow WT140W led7s cw psu s2 PC or equivalent approved make)
4
-
-
Supply of following sizes of 1200 mm sweep. 5 star rated ceiling fan, with double ball bearing, Aluminium pressure die cast body with Aluminium blades, canopies, hanging shackle, 30 cm down rod and without speed regulator suitable for 240V 50 HZ, AC supply confirms to IS 374/1979 as required complete. (Make crompton-ENTRUST50 or equivalent approved make).
3
-
-
Supply of 250 mm sweep,900 rpm light duty exhaust fan in plastic body with self opening louvers working on 230 V AC supply complete with all accessories as required. (Crompton Brisk Air or equivalant approved make)
8
-
-
ITC LIGHT FITTINGS AND FANS
Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
45
-
-
Installation, testing and commissioning of High bay/Mid bay/LED/ FLOOD type fittings on wall/Column/truss/false ceiling using suitable MS clamps, nuts, bolts/ 20mm heavy duty GI chain/ pipe (upto 50cm)etc including connections with 3C 1.5 Sq.mm PVC insulated flexible copper conductor cable as required.
12
-
-
Installation, testing and commissioning of ceiling fan, including fixing the regulator, wiring using down rod of 100cm length using 3 runs of 1.5 sqmm FR PVC insulated stranded copper conductor etc. as required.
3
-
-
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
Upto 450 mm sweep
8
-
-
Numbering of ceiling fan / exhaust fan/ fluorescent fitting as required.
68
-
-
UNDERWATER LIGHTS: -
Supplying to Site and fixing in position, 12W Underwater Light FIxture suitable for operation on 24V DC with 3 m cable, tempered Glass diffuser, SS 316 Grade body construction, suitable gasket as required. The light fixture shall be IP 68 rated. (sample shall be approved by the Engineer- in-Charge). Make Klite 6700 or equivalent approved make
16
-
-
External Driver
Supplying to Site and fixing in position, Single output switching power supply driver module. The device shall be suitable for operation on 240V AC 50Hz and capable of providing 24V DC 24W output, efficiency greater than 80%,PF0.95,THD10% and surge protection. The device shall be IP67 encapsulated. (Sample shall be approved by the engineer in charge). Make:Meanwell LPH-18-24 or equivalent approved make.
16
-
-
EARTHING AND SAFETY EQUIPMENTS
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
-
-
Providing and fixing GI/Cu strip/wire on surface or in recess for connections etc. as required.
-
-
-
25mm X 6mm GI
20
-
-
3.15mm Cu (10 SWG)
150
-
-
Supplying and laying G.I/Copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
-
-
-
25mm X 6mm GI
74
-
-
3.15mm Cu (10 SWG)
60
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements