National Centre For Earth Science Studies Tender

Brickwork with common burnt clay FPS non modular bricks of class designation 7.5 in foundation and plinth 1:6

12mm cement plaster of mix 1:4 (fine sand)

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete

Wall painting with acrylic emulsion paint having VOC content less than 50g/l of approved brand and manufacture including applying additional coats wherever required to achieve even shade and colour , Two coats

Providing and layin vitrified floor tiles in different sizes with water absorption less than .0.08% and confirming to IS 15622 of approved make in all colours and shades with cement based high polymer modified quick set tile adhesive (water based) confirming to IS 15477 in average 3mm thickness 600x600mm

Providing and layin vitrified floor tiles in different sizes with water absorption less than .0.08% and confirming to IS 15622 of approved make in all colours and shadesin skirting riser of steps over 12mm thick bed of cement mortar 1:3, jointing with grey cement slurry @3.3kg/m2 including grouting the joint with white cement and matching pigment etc complete tile 600x600

Supplying and fixing ss304 300mm pull handle for glass doors including all labour and material charges

Providing and fixing aluminium work fordoors windows and ventilators and partitions with extruded built up standard tubular section appropriate z sections of approved make confirming to IS 733 and IS 1285 fixing with dash fasteners of required dia and sizde including necessary filling up the gaps with required EODM gasket etc . Aluminium sections shall be rust free all complete

Providing and fixing glazing in aluminium door window ventilator shutters and partitions with EPDM rubber gasket all complete float glass panes 4mm thickness

Providing and fixing 12mm thick frameless toughened glass door shutte of approved brand and manufacture including providing and fixing top and bottom pivot and spring type fixing arragnement and making necessary holes etc for fixing required door fittings all cpmplete

Providing and fixing double action hydraulic floor spring of approved brand and manufacture confirming to IS 6315 having brand logo embossed on the body with double spring mechanism and door weight upto m125kg for doors including cost of cutting floors embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece MS sheet outer box with slide plate complete as instructed stainless steel cover plate minimum 1.25mm thickness

Providing and fixing false ceiling at all heights including providing and fixing framework made of special section power pressed from MS sheets and galvanised with zinc coating of 120gms/m2 as per IS 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flange of 27mm and 37mm at 1200mmc/c one flange fixed to the ceiling with dash fastner 12.5mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers 25x10x0.5mm of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate GI channels 45x15x.9mm running at the spacing of 1200mm c/c to which the ceiling section 0.5mm thick bottom wdege of 80mm with tapered flanges of 26mm each having lips of 10.5mm at 450mm c/c shall be fixed in a direction perpendicular to GI intermediate channel with connecting clip make out of 2.64mm diax230mm long GI wire at every junction including fixing perimeter channels 0.5mm including fixing of calcium silicate board to ceiling section with dry wall screws of size 3.5x25mm at 230mm c/c including jointing and finishing with jointing compounds in three layers covering upto 150mm on both sides of joints and two coats of primer suitable for boards all as per specification and also cost of making opening for light fittings grills diffisers made with frame of perimeter channels suitably fixed as per drawings and as per direction from the office

CI 44.12%

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2x1.5mm + 1x1.5mm2earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2x2.5mm2 + 1x2.5mm2 earth wire

Supply and fixing of following size of medium class PVC conduit / casing caping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required 25

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "c" curve DP MCB complete with connections testing and commissioning etc as required.

Supplying and fixing following size/ modules, PVC box along with modular base & cover plate for modular switches in recess etc. as required 12 module (200mm x 150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 5/6 a switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required 3pin 5/6 a socket outlet

Supplying and fixing following rating,LED fitting 32w LED fitting 2x2feet

Supplying and fixing following rating,LED fitting 20w led fitting

Supplying and fixing ceiling rose

Supplying and fixing round block

Supplying and fixing 9 module box along with modular base and cover plate for modular switches as required

CI 30.51%