Military Engineer Services Tender

Returning, filling in soil including watering and well ramming in layers not exc 25 cm complete all as specified & directed.

Removing excavated material exc. 250m but n exc. 500 m and depositing where complete all as specified & directed.

M&L sand slaked lime filling (mixed in the ratio of 60:40) under foundations including consolidation all as specified and directed

M&L for hard core of broken stone of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified & directed.

M & L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in Fdn and mass concrete complete all as specified

Use and waste of formwork of sides of concrete foundations, footing, bases of column, raft and raft beams, side and soffits of foundation and plinth beam and similar work for rough finished surfaces of concrete complete all as specified and directed

Use and waste of formwork of sides of columns and similar work for fair finished surfaces of concrete for square, rectangular circular or polygonal complete all as specified.

Formwork to sides and soffits of floor or roof beam, beam hunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc for fair finished surfaces complete all as specified

M & L for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as in footings, foundation, beams, plinth beams, bases for columns complete all as specified.

M & L for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as in Columns complete all as specified.

M&L for RCC M-30 Design mix concrete using 20mm graded stone aggregate as in lintel beam and copings complete all as specified.

M & L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed.

All as above item no. 15 but 5mm dia an over upto including 10mm dia in stirrups, spacers and binders complete all as specified & directed.

M&L Pre Cast cement concrete block masonry 1:3:6 with solid blocks, exc 10cm in width and setting in CM 1:6 complete all as specified.

M&L rendering 15mm thick on fair faces of brick/concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified & directed.

M&L for preparation of new plastered surfaces of walls and applying 2 coat of weather proof Apex Ultima Protek system of Asian paint (or equivalent product of other manufactureres from list) over a coat of antifungal primer over 1.5mm thick wall care putty duly applied through company authorised applicator or under company supervision using modern tools and techniques complete all as specified and as directed Note:- (i). The work must be got executed through authorised applicator of manufacture. The MoU between contractor and paint manufacturer to this effect shall be submitted prior to commencement of these items. (ii) The conractor shall be submit performance guarantee certificate provided by manufacturer for a period of FIVE years from the certified date of completetion of entire work (iii) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe410W Gde E2 50 quality B

M&L for 15mm thick cement plaster in CM 1:4 on fair faces of brick/ concrete surface finished even and smooth with out using extra cement complete all as specified and as directed.

M & L PCC type B1 1:2:4 using 20mm graded agg. in cover slab for drain complete all as specified & directed.

Cement concrete M-10 (Nominal Mix) 1:3:6 using 20 mm graded crushed stone aggregate as in drain & surface channels forming fair finished drains or channel inner girth in cement including forms, moulds mitred/stopped ends etc, complete all as specified.

PCC Type B1 (1:2:4) using 20mm graded crushed stone aggregate as in coping benching and the like including weathering, slightly rounded or chamfered angles as directed including necessary form work and finishing a exposed surfaces complete all exposed surfaces complete all as specified and directed.

Removing excavated soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified & directed.