Military Engineer Services Tender

Cutting out bricks, forming toothing for and bonding new in to old work including material entering old walls and jointing and pointing in CM 1:4 ( Measured on vertical surface in contact with old wall ) all as specified

Taking down cement plaster on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:4 on surfaces other than fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying two coats of cement base paint over primer on walls all as specified and directed.

M & L for PCC 1:2:4 Type B-1 (20 mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S& F rolled sections as in main and cross beams, columns, angles, hip and jack rafters; purlins where connected to common rafters of angle, pipe sections etc complete all as specified and directed.

M&L painting to new steel and iron surface exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of primer including preparation of surfaces complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint on gates, fencing post etc. all as specified & directed by Engineer-in-charge.

S & F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (Note: Each line wire to be measured)

M& L for mechanical cleaning, Grinding the existing concrete tile finished roof surface to make it free from any bituminous residue /dirt, oil and Greece etc and providing the following treatment all as specified and directed by AGE(I)/Engr-in-Charge. (a) M&L for Filling joints using PMC mortar in the ratio of ShaliCrete (or equivalent) : Cement : Sand (1: 2:5 ) using SBR Latex as the bond coat provide fillet 75 mm x 75mm all as directed. (b) M&L for Correcting all the construction joints by grouting with ShaliGrout IP or Equivalent) at 1 m apart and opening of joints in “V” cut groove and fill with PMC mortar prepared in the ratio of ShaliCrete (or equivalent) : Cement : Sand (1:2:5) using (ShaliSBR Latex or equivalent) as the bond coat materials as per manufacturer specification and as directed. (c)M & L for priming the surface with slurry by mixing one part of Acrylic Polymer Coating, (ShaliCrete or equivalent) with one parts of neat cement in the ratio 1 : 1. (d) M & L for Applying 2nd coat of slurry by mixing one part of Acrylic Polymer Coating, (ShaliCrete or equivalent) with two parts of white cement in the ratio 1 : 2 and 24 hrs curing all as specified & directed by Engg -in -charge.