Military Engineer Services Tender
... More
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 5,32,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_685025_1Bid Award Id
ViewTender No
CWE(NW)KOCHI/81487Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for Light Weight block masonry(AAC blocks/ CLC blocks) in C.M 1:5 with blocks of nominal size for 20cm thick walls including cost and conveyance all materials, all labour charges, scaffolding charges, watering, curing, all incidential expenses etc. complete but excluding cost of cement, blocks, sand. The rate also including all ledge walls, fin walls, duct walls etc complete all as specified and directed
100
-
-
... More
M&L for Light Weight block masonry(AAC blocks/ CLC blocks) in C.M 1:5 with blocks of nominal size for 10cm thick walls including cost and conveyance all materials, all labour charges, scaffolding charges, watering, curing, all incidential expenses etc. complete but excluding cost of cement, blocks, sand. The rate also including all ledge walls, fin walls, duct walls etc
100
-
-
... More
M&L for Plastering to External Walls, the plastering shall be total 15mm thick in 02 coats. Base coat is 9mm thk in cement mortar in a ratio of 1:4 (1 Cement : 4 Sand) to surface of external walls, with final coat of 6mm thick cement mortar in ratio 1:4 of including beam, column, sunshade, balcony, all masonry surfaces etc, including jambs, sills, grooves, haunches, rounding of corners, providing & fixing wire mesh -150mm wide at junction of concrete and brick / block masonry and to other required areas, with necessary scaffolding, working platform, finishing, curing and such other works that are required for specified finished surface with wooden/ steel floats with all lead, lift and depth and ready to receive next operation at all floors & heights, the works shall be complete as per specification. (Second layer plastering to be done only after the first layer curing period is over). The rate shall also be inclusive of providing 2.5cm wide groove (02 Nos) on second coat plaster at each floor level. The groove inside shall be finished with 1:3 polymer modified cement mortar including mix with WPC all as specified and directed.
700
-
-
... More
M&L for preparation of newly plastered wall surfaces and applying two coats of anti fungal and anti-algae PU based premium exterior emulsion Weathercoat long life 10 over a two coat of elastomeric waterproofing membrane with a crack bridging capacityof 2-3mm dampstop Elasto (Berger home shield or equivalent ) all as specified and prescribed by manufacture and as directed at site by Engineer-in-Charge.
Note: (i) The prepration of new surface as under : All cracks at parapet, corner joints should be taken minutely. Cracks should be reapir with polymer modified mortar like Advanced Latex Plus after widening the crack into a V grove in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of premium exterior emulsion paint. The cost of materials (like putty, base coat/topcoat of exterior paint), labour & T&P wherever required for preparation of surface are demand to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture. Guarantee certificate should provide from the authorised applicator of manufacturer and shall be got approved from GE. (iii). after carrying out preparation of surface the same shall be got approved before application of exterior emulsion for each building.
(iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor
700
-
-
... More
M&L for plastering in cement mortar in a ratio of 1:5 (1 Cement : 5 Sand) 12mm thickness in 1 coat on internal surface, including scaffolding and tools of work at all levels of in situ concrete and / or concrete block work as a base, masonry work including jambs, sills, grooves, haunches, rounding of corners, providing & fixing GI wire mesh where required, chemical adhesive, with necessary scaffolding, finishing, curing and such other works that are required to make it complete finished smooth with wooden/ steel floats with all lead, lift and depth ready to receive next operation at all floors & heights. The rate should also include making of internal groove at beam and masonry joints with 6mm width and depth complete all as specified and directed
700
-
-
... More
M & L for preparation new plaster on internal surface of wall and applying 1 mm thick wall care putty on new wall surfaces and & applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer all as specified and directed by Engineer in charge
100
-
-
... More
M&L for Plastering concrete soffits, beams, columns etc. of minimum 9mm thick or to required thickness with CM 1:4( cement : sand), finished smooth including scaffolding, curing, etc; complete for ceiling, soffits, staircase, beams and other independent RCC items etc.complete all as per specifications at all floors & heights. Hacking of concrete surface to be ensured before plastering at a rate of 50 nos./Sqm. including mix with WPC all as specified and directed.
1200
-
-
... More
M & L for preparation of new ceiling surface and applying 1 mm thick wall care putty on new wall surfaces and & applying two coats of distemper oil emulsion white over a coat of alkali resistant primer all as specied and directed by Engineer in charge
200
-
-
... More
Supply only integral Liquid water proofing compound complete all as specified and directed
100
-
-
... More
M&L for preparation of old decorated surface of exterior wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of anti fungal and anti-algae PU based premium exterior emulsion Weather coat long life 10 over a two coat of elastomeric waterproofing membrane with a crack bridging capacityof 2-3mm dampstop Elasto (Berger home shield or equivalent) all as specified and prescribed by manufacture of point and as directed at site by Engineer-in-Charge.
Note: (i) The prepration of old surface as under : All cracks at parapet, corner joints should be taken minutely. Cracks should be reapir with polymer modified mortar like Advanced Latex Plus after widening the crack into a V grove in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of premium exterior emulsion paint. The cost of materials (like putty, base coat/topcoat of exterior paint), labour & T&P wherever required for preparation of surface are demand to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture. Guarantee certificate should provide from the authorised applicator of manufacturer and shall be got approved from GE. (iii). after carrying out preparation of surface the same shall be got approved before application of exterior emulsion for each building.
(iv) The cost of Scaffolding and safety measures wherever required are deemed to be included in the rates quoted by the contractor
3360
-
-
... More
M & L for preparation & complete removal of existing treatment on internal surfaces of walls, and applying 1 mm thick wall care putty on old plaster surfaces, preparatory to distempering & applying two coats of distemper oil emulsion on primered surfaces all as specified and directed by Engineer in charge complete all as specified and directed.
2000
-
-
... More
M&L Complete removal of old decorated surface of ceiling including cornices (Plastered or unplastered) and applying two coats of distemper oil emulsion on primered surfaces over 1mm thk of wall care putty all as specified and directed by Engineer in charge complete all as specified and directed.
1000
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
5064
-
-
... More
M&L PCC type B-1, 1:2:4 (20mm graded aggregate) 25mm thick complete all as specified.
2024
-
-
... More
M&L Non - skid Ceramic tiles coloured 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc.approved Pattern over cement sreed 15 mm thick in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr -in-charge.
400
-
-
... More
M & L for Non skid Ceramic tile of size not exceeding 0.36 sqm and tile 8-10mm thick, in floors with approved Pattern or any colour, design over cement sreed 15 mm thick in CM 1:4 etc for pool deck area, , set and jointed in neat cement slurry, inclusive of 3mm spacers and epoxy pointed in white or colour cement to match complete all as specified and directed. (Make: Somany/ HR Johnson/ Kajaria/ Simpolo)
450
-
-
... More
M&L for digital Glazed ceramic tiles in vertical surface 450X 350/600 x 300 mm 7 to 8 mm thick set andjointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick in CM 1:4 on fair face of brick work or concrte surface finished to receive tiles complete all as specified and directed.
800
-
-
... More
Demolition of stone slabs of any description or thickness laid bedded in any motar complete all as specified and directed.
168
-
-
... More
M&L Lapotra stone slab flooring (any approved colour) 16-20mm thick (in single piece) in riser / thread of steps, skirting, etc., over cement screed/back coat 10 mm thick CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing comple in white or colour cement to match complete all as specified and directed.
14
-
-
... More
M&L Lapotra grinate stone slab flooring (any approved colour) 16-20mm thickin flooring over cement screed/back coat 10 mm thick CM 1:3 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing comple in white or colour cement to match complete all as specified and directed.
140
-
-
... More
S&F 20mm thick Granite (of any type) work (table rubbed and polished or leather finish) in steps, jambs, pillars, window- cills, flooring and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
14
-
-
... More
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.
100
-
-
... More
M & L for Endura designer tile of size 30cmx30cmx10-12mm thick of any colour and design, set and jointed in neat cement slurry and pointed in appoxy joint filling minimumum 5mm depth and 3mm thick spacer width complete all as specified and directed by Engr -in-charge. (Epoxy joint filling paid seprately)
1174
-
-
... More
M & L for fixing swimming pool tiles of area not exc 0.11 sqm fixed using high performance polyurethane epoxy based adhesive Nitotile GPX(Fosroc)/Nitotile MPA or equivalent whichever is applicable all complete as per the manufacturer instruictions.
Make :- HR JHONSON/KAJARIA/ORIENTBELL/AGL or equivalent
Note :- (i) Spacer shall be provided between tiles and quoted rate is inclusive of the same.
(ii) Joint filling shall be measured and paid seprately.
2240
-
-
... More
M&L for epoxy tile joint filling 3mm width and 5mm deep with and including spacer using Fosroc/STP/Sika or equivalent on floor tilis of any size complete all as specified and as directed by Engr-in-charge.
3414
-
-
... More
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) n.exc 1.5 sqm each complete all as specified and directed.
24
-
-
... More
Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified.
4
-
-
... More
M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
54
-
-
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge.
18
-
-
... More
S&F extruded aluminium alloy handle 150 mm fabricated type anodised complete all as specified and directed.
24
-
-
... More
M&L for 100 mm size, butt hinges medium weight stainless steel complete all as specified and as directed.
36
-
-
... More
M&L for 200mm long aluminium anodized barrel tower bolt of extruded section complete all as specified.
24
-
-
... More
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
12
-
-
... More
Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).
Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters)
(60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
(A) Area not exceeding 1.00 sqm each
60
-
-
... More
Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).
Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters)
(60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.
EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made
of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes
cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
(A) Area exceeding 1.00 sqm but not exceeding 2.00 sqm each
10
-
-
... More
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC (profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).
Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
12
-
-
... More
S & F Powder coated anodised aluminium 10mm dia hexagonal channel for grill fixed to aluminium frame with aluminium bidding complete all as specifed.Make : JINDAL or equivalent section from HINDALCO/INDALCO/MS AJIT IND PVT LTD
45
-
-
... More
Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge
30
-
-
... More
Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.
(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
10
-
-
... More
S&F in repair door closer, hydraulically regulated, designation No. 3, universal type suitable for door shutters of weight between 61 to 80 Kg with aluminium (die cast) body, fixed ll as specified and directed by Engineer-in-Charge.
2
-
-
... More
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beeding in squares exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed. Make: Hindustan Pilkinton glass Works Ltd/ Modiguard.
20
-
-
... More
M&L for 9 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to frame work as specified and directed.
15
-
-
... More
S&F 140mm Floor door stopper of aluminium and tongue alloy brass body and tongue with hard draw steel spring complete all as specified & directed..
4
-
-
... More
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
15
-
-
... More
M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified .
50
-
-
... More
S&F bib tap in repair fancy type chromium plated 15mm dia including GI nipple and socket complete. Make-Parry ware (Cat No-C0204A1)
12
-
-
... More
S&F in repair water closet pedestal vitreous china white pattern (EWC) including white colour seat cover and connection to drain and to flush pipe & fixing bolts etc complete Make-Parry ware (Cat No-C847H White colour)
8
-
-
... More
S&F in repair hand shower (health faucet) with 8 mm dia, 1m long flexible tube and wall hook (Make Prayag Cat Pat No: BEA-81).
8
-
-
... More
S & F in repair towel rail stainless steel 60cm length complete all as specified and directed Make-Parry ware (Cat No - T6008A1) complete all as specified
12
-
-
... More
S & F for corner Shelf with stainless steel railing complete all as specified and directed Make-Parryware (Cat No - T6010A1)
12
-
-
... More
S & F in repair for Mirror Shelf with stainless steel railing complete all as specified and directed Make-Parry ware (Cat No - T6009A1)
12
-
-
... More
S & F in repair for Soap dispenser including glass platform complete all as specified and directed Make-Parryware (Cat No - T6706A1)
12
-
-
... More
S&F in repair counter Top wash Basin for hand wash white flat back of size 550x445mm fixed or laid on granite platform includingbrackets, waste pipe & CP brass waste coupling of 32mm dia including pillar tap complete all as specified and directed.
12
-
-
... More
S&F in repair for Decorative Looking Mirror of size-600 x 450 mm smooth edge mirror of selected quality glass mounted fixed with brass screws to walls complete all as specified. Make-Parryware, CAT No.-C8608
12
-
-
... More
S&F looking mirror of any size not less than 6mm of selected quality glass, mounted on 8 to 10mm thick AC building board or commercial plywood & Aluminium beading alround and fixed with hooks, screws with SS round mirror cap complete all as specified and directed.
10
-
-
... More
S&F Heavy duty pool diving board of size [(50x50cm) ht. 45 cm of wt. not less than 10 kg and load capacity not less than 250kg] with starting block surace is non-slip resin material, the base and back stoke Handshake is made of Heavy duty 304 stainless steel complete all as specified and directed by Engr-in-charge.
8
-
-
... More
S&F Toilet paper holder of make Prayag cat part No BA 98 all as specified and directed.
12
-
-
... More
S&F peg set of 6 pin, hooks & rail of stainless steel and fixed with screws complete all as specified and directed.
18
-
-
... More
Supply and fix in repair CP Plate shower Make Jaguar or equivalent ,complete all as specified and as directed by Engineer-in-Charge.
8
-
-
... More
Supply and fix in repair Shower Arm 15 mm size , make Jaguar or equivalent matching to abovecomplete all as specified and as directed by Engineer-in-Charge.
8
-
-
... More
S&F in repair 32mm waste coupling brass chomium plated for glazed ware sinks,basins etc with long screwed shanks and fly- nuts flange and beded in red lead cement and other end fixed Ground floor to 4th storey complete all as specified and directed.
4
-
-
... More
S&F for Angle valve fancy type brass CP coated complete all as specified. Make-Parryware, CAT No.-G0253A1
15
-
-
... More
S&F 75 mm dia PVC (SWR) floor trap plain with steel grating including jointing with solvent cement complete.
20
-
-
... More
S&F Chinaware partition for urinal of size 310 x 700 mm all as specified and as directed.
7
-
-
... More
S&F vitreous china urinals coloured half stall type including all fittings complete all as specified and as directed.
11
-
-
... More
S&F Push tap 15mm high pressure suitable for urinals complete all as specified.
11
-
-
... More
S&F CP urinal spreader for 15 mm bore fixed with urinal including CP pipe complete all as specified.
11
-
-
... More
Dismantling of Cast iron or PVC, soil waste and vent up to 100 mm dia and in any length with fittings and with any type of joints Ground floor to 4th storey complete all as specified and directed
180
-
-
... More
S&F 110 mm PVC (SWR) pipes in any length with rubber ring joints fixed to walls complete all as specified and directed
100
-
-
... More
All as per item No.71 above but 75 mm dia complete all as specified and directed
80
-
-
... More
Demolition of concrete in ground floors and pavings n exc 15 cm thickness complete all as specified and directed (below or above GL)
203.75
-
-
... More
M&L PCC1:3:6 type C2 75mm thick in plinth protection, surface to be finished even and fair complete all as specified and directed
150
-
-
... More
M&L for 100mm hardcore of gauge n exc. 63mm broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface all as specified and directed.
260
-
-
... More
M&L for Coarse aggregate for granolithic floors graded from 12.5mm to 4.75mm under floors or in foundations spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required complete all as specified and directed.
0.75
-
-
... More
M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to SI 15658-2006 of 60mm thickness,M-35 grade with grey cement and pigment complete all as specified.
150
-
-
... More
M&L PCC 1:2:4 type B1 with 20mm graded aggregate as in coping complete all as specified and directed.
6
-
-
... More
M&L PCC 1:4:8 type D2 100 mm thick using 40 mm graded aggregates as in sub base of floor complete all as specified.
2450
-
-
... More
M & L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set in neat cement slurry with grey cement and pigments laid over and including 20 mm thick screed bed in CM 1;6 and including taking down old tiles complete all as specified and directed. (make-Eurocon/sirex/Johnson)
2300
-
-
... More
Dismantling plain or corrugated steel sheeting, any guage, thickness incl Nainital or similar pattern roof covering complete all as specified and directed.
200
-
-
... More
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified
23.5
-
-
... More
S&F framed work such as grills, gratings, etc with ends of bars shouldered & or riveted, or forged into spikes, framed guard bars etc & similar work conforming to Fe.290 Gde E-165 complete all as specified and directed.
500
-
-
... More
Material & Labour for providing and fixing stainless steel (Grade 316) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
1850
-
-
... More
M&L preparing new steel surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and directed
430
-
-
... More
M&L preparing old steel surface of any description exc 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed
75
-
-
... More
Supplying and erection of the tensile structure, fabrication of the 902 S2 Type 2 fabric (15 years warranty) weight above 950 g/m2, Fabric tensile strength - 420/400 daN/5cm, and Tear resistance of 55/50 daN, visible light transmitance 8%, Fire rating Euroclass B-s2, d0/EN 13501-1, High frequency welding to be done in for strom to ensure the quality and adhesion. design requirement with proper prestress values, Edge cables are non greese Gl with SS304 end terminal, Accessories required for the installation with specified quality and grade including transport to site. Installation of the converted fabric with using scaffolding, crane with proper safety measures (HSE Norms), precautions with industry standard precaution and with appropriate tools and tackles. Supply & factory fabrication of the supporting steel structure with design norms with 310 grade steel tubular section conforming to IS standards, bending, prefabrication works including preset laser cutting secondary steel with proper anticorrosion treatment followed by one coat of the Zinc rich primer, including transport to the site, including all bent tubes, bracing, base plate, j- bolts, secondary steel. Installation of the steel structure with using heavy duty crane, scaffoldings, with safe work procedure, followed by 2 coat of the zinc rich primer and 2 coats of the Epoxy paint with Appropriate surface finish. The rate shall include the cost of MS structure with painting with primer and epoxy paint and all lead, lifts and scaffolding including erection of the structure and complete as per standards specifications and as directed by the Engineer-in Charge
200
-
-
... More
Material and labour for CRS TMT bars Fe 500D Mild steel bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
500
-
-
... More
M&L for Drilling holes at specified location to required depth and diameter as directed by Engr-in-charge and injecting the log fix chemical of M/s Fosroc/STP/Sika or equivalent to join beam to column/beam to beam wherever required to insert reinforecement bars as directed by Engr-in-Charge. Note : Reinforcemet shall be measured and paid seprately
160
-
-
... More
M&L for Rehabilitation for minor cracks in 5 stages.
(i) Removing cover concrete portion in the structural elements carefully with mechanical arrangements and hand chiseling, clean the loose dust and clean the reinforcement with alkaline rust removed epoxy phenolic coating by asian paint
(ii) Applying anticorrosive coating Nitrozinc primer manufactured by M/s Fosroc/Sika/STP Chemicals or equivalent, including providing sacrificial Zinc anode Galvashield XPI before application.
(iii) Applying epoxy based bond coat Nitrobond EP manufactured by M/s Fosroc/Sika/STP Chemicals or equivalent as per manufactures instruction (iv) Preparation of Polymer modified mortar by mixing 3 ltrs of Nitrobond SBR per bag of cement manufactured by M/s Fosroc/Sika/STP Chemicals or equivalent as per manufactures instruction per bag of cement in cement and sand mortar 1:3 and rendering with trowel .
(v) Membrane curing by 'Concure' manufactured by M/s Fosroc/Sika/STP Chemicals or equivalent
150
-
-
... More
M&L Microconccreting in RCC coloumns / Beams including chemicals, reinforcement ,form work averaging thickness not exceeding 100 mm as per the following stages
(i) Support the slab and beam which is contrbuting the load for the colomn under rehabilation. (ii) Remove the damaged concrete portions completely till the reiforcement is exposed from the member carefully with mechanical arrangements and hand chiseling and clean the dust particles.
(iii) Anchoring shear connectors in the form of 'L' shaped bars of 10 mm dia HSD in to the existing concrete by drilling holes not less than 75 mm depth 12 mm dia in staggered position along the perimeter and height of member. Spacing shoudnot be less that 300 mm for all sides. Before anhoring clean the holes with Jet compressed air to remove dust particles and anchor the dowel bars serve as shear connectors with chemical resin capsules manufactured by M/S Fosroc chemicals or equivalent. (iv) The rusted portion in the reinforcement should be removed using Reebaklens RR, or epoxy phenolic coating by asian paint manufactured by M/s Fosroc and apply Nitrozinc primer manufactured by M/S Fosroc or (alakline based) chemicals or equivalent with providing sacrificial Zinc anode Galvashield XPI (v) Providing leakproof shuttering system for the jacket portion of the members and micro concrete with Rendroc RG manufactured by M/S Fosroc chemicals or equivalent( compressive strength of Micro concrete should be 45 MPa at 28 days) Reinforcement will be measured and paid in connected item separatelyFor : M&L Microconccreting in RCC coloumns / Beams / Slab (vi) Application of concrete protection solution M/s Sika guar XT/Sika guard 550 W Elastic/ equivalent of chemical from M/s Fosoc/STP/Sika
250
-
-
... More
M&L Microconccreting in RCC Slab including chemicals, reinforcement ,form work averaging thickness not exceeding 50 mm as per the following stages
(i) Removal of damage concrete
(ii) Rust removal of bars using M/s Sika rust off 100 or equivalent of chemical from M/s Fosoc/STP/Sika
(iii) Application of corrison protection layer M/s Sika rust off / SIka Top armatec-108 or equivalent of chemical from M/s Fosoc/STP/Sika
(iv) Appliation of bonding agent Sikadur 32LP/ SIka-Hibond or equivalent of chemical from M/s Fosoc/STP/Sika
(v) Providing leakproof shuttering system for the jacket portion of the members and micro concrete with Rendroc RG manufactured by M/S Fosroc chemicals or equivalent( compressive strength of Micro concrete should be 45 MPa at 28 days) Reinforcement will be measured and paid in connected item separately
(vi) Application of concrete protection solution M/s Sika guar XT/Sika guard 550 W Elastic/ equivalent of chemical from M/s Fosoc/STP/Sika
500
-
-
... More
M&L for testing Horizontal expansion joints by (i) clean the joint and remove the pad such that the depth should not be less half the width of joint including rectify the broken portion with polymer modified mortar or Micro concrete as required. (ii) Provide backer rod and affix masking tape either side of the joint including apply the primer to both side of joint and fix debonding tape. (iii) Mix the base and hardener of PU sealant Colper 200 and pour the same to the primed joint (iv) After setting provide Aluminium sheet of width 100mm in such away that one side is fixed and other end free. Refill the area with required brick jelly taking the joint up to top
100
-
-
... More
M&L for repair of cracks in the masonry walls
(i) By marking 75 mm either side of the crack and cutting with hand held cutter including chip off the plaster and exposing brick work
(ii) Make groove at every 150 mm c/c perpendicular to the crack and provide 8 mm dia TMT bar (iii) Prepare AR mortar in the ratio of 1:3 and add Nitobound AR manufactured by M/s Fosroc or equivalent per bag of cement and grout the same with 20 mm nozzle to the primed concrete surface . Fill up and finish the crack using a trowel. Reinforcement will be measured and paid in connected item separately
150
-
-
... More
M&L for repair of cracks between the interface of concrete and brick (i) By marking 75 mm either side of the crack and cutting with hand held cutter including chip off the plaster and exposing brick work and concrete surface (ii) Clean with water and allow to dry (iii) Make groove at every 150 mm c/c perpendicular to the crack and provide 8 mm dia TMT bar (iv) Prepare cement mortar in the ratio of 1:3 and add Nitobound AR manufactured by M/s Fosroc or equivalent one litre per bag of cement and apply the same up to half the thickness of plaster using trowel to the primed concrete surface (v) Fix chicken wire mesh or fibre mesh over the first layer of plastering. (vi) Continue the 2nd layer of plastering with Nitobond SBR followed by smooth finishFill up and finish the crack using a trowel Reinforcement will be measured and paid in connected item separately
150
-
-
... More
M&L for water proofing treatment including equipments and supervision charges in following step by step procedure:-
(a)Chipping and removing of any concrete laitance or cement debris over the surface.
(b)Further chipping to achieve the mother slab of the concrete, High pressure cleaning of the entire surface, anklet filling(coving of joints) of all joints between wall and floor using fibre reinforced repair mrtar.
(c)Chipping and opening of all joints between pipes, light points and water outlets in the pool. Filling and packing of these joints using fibre reinforced repair mortars.
(d)Application of one coat of SBR Latex(Sika)/liquithane EMA(IWL)/Nitobond SBR(Fosroc) or equivalent over all the corners between the floor and wall joints.
(e)Priming coat of SBR Latex(Sika)/Liquithane primer(IWL) or equivlent over the entire surface, Lying of fibre mesh of 45 gsm thickness and applying the second coat of latex based SBR coat.
(f)Application of two coats of elastomeric based cementitious water proofing system(Sika Top seal 107)(Fosroc Brush bond RFX)/NITOCOTE CM210 or equivalent whichever is applicable all as per manufacturer,s Instructions and specifications for all leads and lifts including all materials & manpower tools and tackles etc, protect the applied liquid membrane, spread separation layer of 100 GSM geo-textile with overlap of 50mm in both directions on fully cured water proofed surface before laying protection screed of CM 1:3 with WPC 20mm thick.
Note:-(i) The work should be carried out by authorized applicator of manufacture only.(ii)Chipping shall be done by manual means only to avoid any damage to mother slab.
2240
-
-
... More
Water proofing by Krystalline Method - Surface preparation: Prior to application of work, all surfaces shall be cleaned to remove all dust, foreign matters, loose materials or any deposits of contaminants which could affect the bond between the surface and the Dr. Fixit Krystalline coating. All concrete surfaces shall be thoroughly pre-wetted for at least one hour prior to the application of coating. Depressions are filled and leveled using PMC. For the PMC mixing ratio is 1 kg cement : 1.5 kg Fine River sand and 1kg Pidicrete URP. including plain screeding concrete using 20mm and down size stone aggregates for average 8cm thick, to proper gradients, lines, levels, machine mixed, mechanically vibrated including cost and conveyance of all materials, all labour charges, watering and curing, all leads & lift etc. complete..(Attached the Detailed Methodology Statement from M/s Fosroc/Sika/STP or Equivalent Brand). Warranty: 10 years warranty for all the works done by the contractor.
1000
-
-
... More
M&L for Drilling holes at specified location to required depth and diameter as directed by Engr-in-charge and injecting the two component cementitous grout CONBEXTRA GP2 by Fosroc/Sika/STP chemcicals or equivalent as applicable upto 500gm per packers fixed at 500mm c/c in staggered manner complete all as specified and as directed by Engr-in-charge.
300
-
-
... More
Taking down tar felt (water proofing treatement) on roof slab incl cleaning and removing tar felt material and disposing to a distance of exc 250m not exc 500 m complete all as specified
350
-
-
... More
M&L for water proofing treatment over roof surface with cement mortar 1:4 admixed with NitoBond SBr or equivalnt @ 1 litre per 50 Kg bag of cement. Annular space of down take water pipe shall be packed and sealed using Conbextra GP2 or equivalent mixed water and filling as per manufacturers specifications. water ponding for minimum for 48 hours and injection grouting of construction joints, leaking spot and honey combs with cementious pressure grouting with 40psi pump using Cebex 100 or equivalent @225 gms mixed to 50 Kg bag of cement incl joints packing using polymer modified mortar. Providing and applying water proof coating using fosroc Nitoproof 600 or equivalent, over dry surfaces to achieve 1.5mm thick with 02 coats with interval period of 6 hours over a sustrate using spray/ squngee/roller/brush. Water proofing coating shall have the elongation of 500-700% (ASTM D412-90), tear resistance of 21Kn/m (ATMD624-00) and tensile strength of 1.9 N/mm2. Termination to be done on wall extending the coating to min 300mm height above the finished floor level as per vendor recommendation. Laying 200gsm non-woven geo textile membrane over Nitoproof 600 coating with overlap sealed before providing screed concrete of thickness 50mm 1:2:4 mix type B1 with approved water proofing compound to maintain drainage of water easily Complete all as specified and directed by Engr-in-charge. (Water proofing compound measured at paid septrately) Make:- FOSROC or equivalent.
350
-
-
... More
M&L Antitermite post costruction treatment along the external wall below concrete or masonry using chemical emulsion @2.25/linear meter including pluging holes etc complete all as specified and directed
400
-
-
... More
M&L Antitermite post costruction treatment under existing floors using emulsion one litre /hole300mm apart including drilling along external wall below including pluging holes 12 mm dia holes with CM1:2 to match the existing floors complete all as specified and directed
100
-
-
... More
M&L Antitermite post costruction treatment of voids in masonary using chemical emulsion one litre/ hole at 300mm interval incuding drilling hole at 45 degree and replugging them with motar 1:2 to match existing complete all as specified and directed .
300
-
-
... More
M&L Antitermite post costruction treatment at all points of contact of wood work by chemical emulsion @0.5litre/ hole by drilling 6mm dia holes at a down ward angle of 45 degree at 150mm centre to centre and sealing the same. complete all as specified and directed
50
-
-
... More
S & F 220 mm width rectangular UPVC SWR ready made eaves gutter of pressure rating 6 Kg/cm2 of approved make including necessary fitting like bend WC/MS Clips stop end drop etc complete all as specified.
150
-
-
... More
Supply and fix Acrylic board partitions, semi translucent of 10mm thickness fixed to walls using necessary stainless steel fitting accessories incl necessary aluminium frame work and fittings complete all as specified and directed by Engr-in-Charge.
50
-
-
... More
Excavation over area, n exc 1.5m deep and getting out in soft loose soil complete all as specified and directed
52
-
-
... More
M&L for removing of excavated material exc. 250m but not exceeding 500m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.
45
-
-
... More
M&L sand slaked lime filling ( mixed in the ratio of 60:40) under foundations including consolidation all as specified and directed
20
-
-
... More
M&L for hard core of broken stone of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to a true surface complete all as specified and directed
20
-
-
... More
M&L for PCC type D2 1:4:8 (using 40mm graded aggregate) as in foundations, filling and mass concrete complete all as specified.
10
-
-
... More
M&L Formwork rough finished surface of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed
20
-
-
... More
M&L Formwork to rough finished surface of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified
8
-
-
... More
M&L Formwork to rough finished surface of concrete (square, rectangular or polygon)to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified
10
-
-
... More
M & L for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as in footings, foundation beams; plinth beams; bases for columns, etc. and mass concrete complete all as specified and directed
20
-
-
... More
M & L for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified.
3
-
-
... More
M & L for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specifed.
3
-
-
... More
M & L for RCC M-30 Design mix concrete using 20 mm graded stone aggregate as Columns, pillars, piers, posts and struts complete all as specifed.
5
-
-
... More
M&L for Damp proof course to horizontal or vertical surfaces including necessary formwork, 40 mm thick, in Cement concrete 1:2:4 type B0 complete all as specified and directed
75
-
-
... More
M&L applying evenly a tack coat of bitumen 85/25 at the rate of 1.2Kg/sq.m. including cleaning surfaces complete all as specified.
75
-
-
... More
M&L Polythene film, 150 micron thick, laid over a coat of bitumen primer, @ 0.30 to 0.50kg per sqm complete all as specified.
75
-
-
... More
S&F powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
350
-
-
... More
S & F Figured glass, pin head type plain 4.00mm thick glazing all with aluminum beading & rubber gaskets etc not exc 0.5 sqm in each pane fixed in alumuninum window, ventilator complete all as specified and directed.
5
-
-
... More
S&F Toughned glass 10 mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required.complete all as specified and directed
6
-
-
... More
S/F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainlesss , steel ocver, governing picot made of brass other parts made of mild steel heavy duty in repairs.complete all as specified and directed
2
-
-
... More
S&F powder coated aluminium door shutters, with 4mm thk coloured/wooden grain aluminium composite panel (approved by Engr-in-Charge) including necessary joining cleats, glazing clips, ruber neoprene packing, suitable handle, tower bolt, SS butt hinges,mortice lock 4 lever with 65 mm latch anodised aluminum snap beading screws etc. complete all as specified
10
-
-
... More
Demolition of cement concrete (reinforced) in ground floor and paving not exceeding 15 cm thick (below or above G.L) all as specified and directed.
31
-
-
... More
S&F 4 mm thick sheet glass, ordinary quality and glazing with oil putty / beeding in squares not exceeding 0.5 sqm each pane fix to wood/aluminium joinery complete all as specified and directed. Make: Hindustan Pilkinton glass Works Ltd/ Modiguard.
60
-
-
... More
AREA DRAINAGE: M&L for precast cemnet concrete block masonry type C1, 1:3:6 (using 20mm graded aggregate) with solid blocks exc 10cm in width and setting in cement mortar 1:6 complete all as specified and directed.
20
-
-
... More
M&L 15 mm thick plaster on fair faces of brick or concrete surfaces in cement and sand mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed
55
-
-
... More
S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe-410-W(Gde- E-250) quality- B complete all as specified and directed
1000
-
-
... More
M & L for Cement concrete in surface channels and drains in PCC type B2 1:2:4 (40mm graded aggregate) complete all as specified and directed
0.8
-
-
... More
Extra for forming of fair finished drain or channel having 30cm inner girth in cement concrete complete all as specified and directed
60
-
-
... More
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose/soft soil complete all as specified.
20
-
-
... More
M&L for Returning, filling in soft/loose soil including watering and well ramming in layers not exc 25 cm complete all as specified.
17
-
-
... More
M&L for removing of excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.
10
-
-
... More
SEWAGE DISPOSAL: M&L Cement concrete in foundations, filling and mass concrete type C2 1:3:6 ( 40mm graded aggregate)
1
-
-
... More
M & L for precast cement concrete type B1, 1:2:4 (20mm graded stone aggrigate) in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified
0.5
-
-
... More
Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, RETAINING WALLS hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-W (Gde E 250) Quality A or Fe-290 (Gde E-165) complete all as specified and directed
180
-
-
... More
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar, 150mm pipe complete all as specified and directed
60
-
-
... More
M&L for Reinforced concrete pipes class NP 2 of 150 mm dia laid and jointed complete with collars.complete all as specified and directed
60
-
-
... More
M&L cement concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC 1:3:6 type C2 with 40mm graded aggregate, dia of pipe 150mm complete all as specified and directed
60
-
-
... More
COMPOUND WALL: Dismantling structural steel work including doors, gates but excluding framed truss etc
12
-
-
... More
M&L MS Framed work confirming to Fe 410 -W (Gde- E- 250) quality- A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete
600
-
-
... More
M&L MS work as in posts and struts in fencing including cutting tops to shapeas directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
500
-
-
... More
Dismantling chain link fencing, wire mesh etc any type /size complete all as specified and directed.
450
-
-
... More
S&F PVC coated chain link fencing ( mesh 50 mm X 50 mm size) nominal dia of wire 3 mm ( including pvc coating ) fixed to fencing posts using suitable bolts and nuts complete all as specified (nuts and bolts shall be measured seperately)
450
-
-
... More
S&F Mild steel screw bolts(machine made) withhexagonal or squareheads at oneendandscrewedtheother,orscrewed both ends, eachscrewed end to be fittedwith washers and onehexagonal or squareut, exc 5cm nexc 10cm 11 to 15mm long complete all as specified and directed.
25
-
-
... More
Material and labour for CRS TMT bars Fe 500D Quality A 6mm to 8mm dia cut to length bent to shape required including cranking bending spirally for hooping for coloumns hooking ends and binding with and including mild steel wire (annealed not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
500
-
-
... More
INTERNAL WATER SUPPLY: Supply and fix in repair on wall/ceiling/floor on wall high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 50 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC
45
-
-
... More
Supply and fix in repair on wall/ceiling/floor on wall high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC
90
-
-
... More
Supply and fix in repair on wall/ceiling/floor on wall high pressure CPVC pipes SDR-11 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC
450
-
-
... More
Supply and fixing of Bip cock , CP quarter turn with flange and areator, fancy type short body cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.( Make : Model No F2008151 of Cera or any other manufacturers in the approved list)
25
-
-
... More
Supply and fixing of Bip cock, CP quarter turn with flange and areator, fancy type long nose with wall flange cast copper alloy with crutch or butterfly handle screwed for GI/ CPVC pipe of size 15 mm complete all as specified and as directed by the Engineer-in-charge.(Make : Model No F2008152 of Cera or any other manufacturers in the approved list)
2
-
-
... More
Supply and fixing of concealed stop cock regular body,Quarter turn with adjustable wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directedby the Engineer-in-charge.(Make : Model NO: F2002362 of Cera or any other manufacturers in the approved list)
30
-
-
... More
Supply and fixing of 15 mm angle valve, half turn with flange, with flange type chromium plated for fixing accessories for for CPVC pipe complete specified and as directed by the Engineer-in-charge.(Make : Model No: F2008201 of Cera or any other manufacturers in the approved list)
15
-
-
... More
Supply and fixing of swivel overhead shower (minimum weight 40 grams) of PTMT any colour with shower arm (minimum weight 40 grams) 15mm size, 195 mm long with bend of 45 degree with flange for fixing with CPVC pipe complete and all as specified and as directed by the Engineer-in-charge.(Make : Model No: F7020104CH of Cera or any other manufacturers in the approved list)
30
-
-
... More
Supply and fixing in reapir PVC connection pipe 15 mm dia (outer 450mm long cold water complete with brass union on both sides to suit 15mm GI/CPVC pipe and taking down old one, complete all as specified and directed by the Engineer-in-charge.
18
-
-
... More
Supply and fixing of health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe , complete all as specified and directed by engr in charge (Make : Model No: F8030107AB of Cera or any other manufacturers in the approved list)
5
-
-
... More
S& F in repair of CPVC Ball Valve of size 20 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC
12
-
-
... More
S& F in repair of CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC
3
-
-
... More
S& F in repair of CPVC Ball Valve of size 50 mm dia suitable for CPVC pipe incl necessary fittings and taking down old one complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC
6
-
-
... More
Supply and fixing of concealed flush/push cock regular body, wall flange chromium plated with CP cup fancy type of size 20mm complete all as specified and as directedby the Engineer-in-charge.(Make : Model NO:F8010106 of Cera or any other manufacturers in the approved list)
13
-
-
... More
Taking down old u/s Gi tube of any size and any make complete all as specified and as directed.
585
-
-
... More
INTERNAL ELECTRIFICATION : Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
160
-
-
... More
M&L point wiring with 1.5 Sqmm PVC insulated unsheathed FRLSH multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic ( ISI marked ) fixed concealed on wall /roof except beam, column and RCC roof including modular white cover plate,flush metal box etc incl 1.5 Sqmm PVC insulated copper conductor as earth continuity wire for the following:-
-
-
-
... More
One light point controlled by one switch complete all as specified and directed.
86
-
-
... More
One fan point / exhaust fan point controlled by one switch & regulator complete all as specified and directed.
36
-
-
... More
One 5 pin 5 Amps Socket point controlled by one switch on same board complete all as specified and directed.
8
-
-
... More
One 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and directed.
16
-
-
... More
All as per item No 167 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent boardcomplete all as specified and directed.
12
-
-
... More
All as per item No 167 above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure complete all as specified and directed.
2
-
-
... More
S&F modular switch 1 way 6 Amps,1 module complete all as specified and directed.
158
-
-
... More
S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and directed.
118
-
-
... More
S & F socket modular 6 Amps and 2/3 pin combined 2 module complete all as specified and directed.
24
-
-
... More
S & F Modular socket 6 A/16 A - 2/3 pin combined 2 module complete all as specified and directed.
12
-
-
... More
S&F Modular switch 1 way 16A 1 module complete all as specified and directed.
12
-
-
... More
Supply & fix surface mounted LED down lighter 2'x2', 36/40 W, 120 Lumen/Watt, 240 Volt all as per specified and directed. Make Philips Cat Part No. RC380B LED 30S-6500 G4 L60 W60 PSD OD or Surya/ Syska
10
-
-
... More
S&F Tubelight fitting 1 x 20 w ,with T 8 LED tube with aluminium Extrusion heat sink for optimum performance with high luminous efficiency and batten pre wired suitable for use with LED tube with concealed accessories complete. including taking down old one complete all as specified and directed. Make:REGALBATTENT8UPTO1X22WSSBSWH & LED rod CRYSTAL1213T8DSTL20WLED865SGLASS/CG/WIPRO
66
-
-
... More
S&F fan regulator electronic step type, modular type, 120 W, 2 module complete all as specified and as directed.
26
-
-
... More
S&F Sheet metal enclosures with socket plug top and MCB' single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 A MCB complete all as specified and directed.
6
-
-
... More
Taking down old u/s DBs of any size and make complete all specified and directed
7
-
-
... More
S&F Sheet metal enclosure TPN DB's when MCB's to be used 4 way with 200 amps bus bar double door
2
-
-
... More
S&F Sheet metal enclosure SPN DB's when MCB's to be used 12 way with 200 amps bus bar double door complete all as specified and directed.
2
-
-
... More
S&F SPN sheet metal enclosure for DB 8 ways Double door.complete all as specified and directed.
2
-
-
... More
s&f sheet metal enclosoure SPN DB 4 ways double door complete all as specified and directed.
1
-
-
... More
S&F MCCB 4 pole, 415 Volt fixed type 125 Amps with breaking capacity 16 KA complete all as specified and directed.
2
-
-
... More
S&F MCB 'B' Curve 40 Amp SPN ,240 Volts Make L&T Cat Part No. BB20400B all as specified and directed.
16
-
-
... More
S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts,Make Schneider Cat Part No. A9N1P06B to A9N1P32B, all as specified and directed.
54
-
-
... More
Supply & fix ceiling fans complete with electronic type regulator and accessories 230 V,1200 mm sweep. BEE 5 star rated complete all as specified.Make CG Cat Part Energion HS BLDC/Havells/Usha Note :-Old exhaust fans will be deposited in MES store yard
20
-
-
... More
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete all as specified Make Havells turbo force sp /CG/Usha .Note:- Old exhaust fans will be deposited in MES store yard
7
-
-
... More
Taking down old sub main wiring of any size complete all as specified and directed.
565
-
-
... More
M &L Wiring for circuit/submainwiring alongwith earthwire with the followingsizes of FR is PVC insulatedcopper conductor, singlecore cable in surface/recessed as requireddirected. Note: two run of 4 sqmm size PVE cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length
420
-
-
... More
All as per item No 190 but 2 single core 6 Sqmm with 6 Sqmm earth wire complete all as specified and directed.
25
-
-
... More
All as per item No 190 above but with 4 single core 10 Sqmm PVC insulated copper conductor with 2 run 10 Sqmm copper conductor as earth wire complete all as specified and directed.
120
-
-
... More
Supply and fixing building security light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection of 45 Watt Crompton Cat Part No. Crompton Cat Part No. LSTS-45-CDL-M including suitable GI bracket of 25 mm dia and fixing arrangement on walls all as specified and directed including taking down of existing light fitting of any type and make.
4
-
-
... More
S&F LED flood light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic with IP 66 protection, 3000 K, with 10 KV SPD of 50 watt of Crompton Cat Part No. LFL-50-CDL/60-M all as specified and directed including taking down of existing light fitting of any type and make.
4
-
-
... More
S&F LED Highbay flood light made up of pressure die cast housing with toughened glass and high power LEDs with option of secondary optic of 200 watt of Bajaj Cat Part No. BGHB 200W LED GIV all as specified and directed including taking down of existing light fitting of any type and make.
14
-
-
... More
M & L Taking down 1200/1400mm sweep ceiling fan, preparing the surfaces of ceiling fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan complete all as specified.
6
-
-
... More
Taking down unserviceable ceiling fan of 1200mm/1400mm sweep, cutting out the existing burnt out fan motor winding, cleaning the motor slots, rewinding the motor with insulated copper winding wire of existing gauge, baking / heating up the motor to achieve the proper insulation resistance and re-hanging / refixing after repair including applying a coat of synthetic enamel paint (Glossy Finish) with spray gun, marking MES No complete all as specified.
6
-
-
... More
M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 2 core 10 sq. mm all as specified and directed
75
-
-
... More
M&L XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 3.5 core 50 sq. mm all as specified and directed
100
-
-
... More
Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire complete all as specified and directed.
40
-
-
... More
M & L Taking down 450/350/300mm sweep exhaust fan, preparing the surfaces of exhaust fan by cleaning and filling the cavities with filler and applying one coat of synthetic enamel paint (Glossy finish) with spray gun, marking the MES No, fixing the fan in its original location, connecting up including provision of cable from ceiling rosse to connector to fan complete all as specified.
4
-
-
... More
S&F of integral LED Aviation light comprising of aluminium housing with polycarbonate enclosure complete all as specified. Make Bajaj Cat Part No. BGAV 302 LED
1
-
-
... More
Supply & fix surface mounted LED down lighter 1'x1', 18 W, 110 Lumen/Watt, 240 Volt all as per specified and directed. Make Crompton Cat Part No. LCTLSNE-18-FO-CDL (1x1)
10
-
-
... More
Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion .
2
-
-
... More
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth
200
-
-
... More
M&L for opening pressure filter of capacity 120 Cum/hr , drain out water remove all filters media(sand & pebbles) cleaning the internal surface, pebbles duly washed and cleaned with fresh water and reassemly the filter testing and commissioning complete all as specified and directed.
3
-
-
... More
M&L Quartz sand in two grades replacement in the filter grade size 16/30mm or 6/3 mm complete all as specified and directed.
14550
-
-
... More
Supply and fix suction sweeper trolly mounted complete unit Heavy duty M.S Powder coated suction sweeper brush unit made out of 6 mm M.S plate box type size 21/2”x3’ With heavy duty nylon brush size 2” x 500 mm with 5HP motor pump & DOL starter, mounted on trolley including Nylon rope (12 mm dia 60 RM), hose pipe (50 mm dia 60 RM) float(150 mm dia double hooked 24 Nos) etc, complete as per required length for Olympic size swimming pool including dismantling old and shifting to store complete all as specified and directed.
1
-
-
... More
Supply and fix Heavy duty Chemical Dosing system plunger type suitable to inject solution upto 25 LPH working pressure 10 kg /cm2 comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP,1440 RPM assembly with agitator in one motor , agitator with SS sweep blade duly FRP coated, FRP tank 150 ltrs capacity, complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with Chemical grade PVC NRV. along with Control panel for Dosing Pump suitable for Model SSAPS/CDSPT/25 made of powder coated MS fabricated box consisting of LED indicator, digital Volt meter, Amp meter, single phase preventor, High voltage low voltage protection including dismantling old and shifting to store complete all as specified and directed.
Make:- Sathya Sai / Sathya Sai Aqua Pura Services
Model No:- SSAPS/CDSPT/25/ST or equivalent.
1
-
-
... More
Supply, install, testing and commissioning of Monoblock pump set of 3 HP , 415 Volt 50 Htz, 300 - 120 LPM at 12 - 36 Mtr head, suction 50 mm and delivery 40 mm including suitable starter , PCC plat form and all required electric cables as per manufactruer recomendation all as specified and directed ( For fresh water supply).Including dismantling old and shifting to store complete all as specified and directed.
1
-
-
... More
S & F MS (ERW) pipe connected by welding, nominal dia 150 mm as per IS 3589 (1981) thickness 6.0 mm all as specified and directed.
6
-
-
... More
Same as per item No 211 but bore dia 300 mm. complete all as specified and directed.
12
-
-
... More
Supply and fix UPVC butter fly valve of size 150mm dia as existing, including taking dowm the old unserviceable butter fly valve all as specified and directed Make :- Supreme / Katex
15
-
-
... More
Supply and fix butterfly Valve conforming to IS 13095, 300 mm (12”) dia including taking dowm the old unserviceable butterfly valve all as specified and directed.
2
-
-
... More
S & F in repair Non return Valve of size 150 mm including taking dowm the old unserviceable NRV all as specified and directed.
4
-
-
... More
All as per item No 215 but 200 mm. complete all as specified and directed.
1
-
-
... More
Supply and laying of CPVC 50mm outer dia SDR-13.5 pipes & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified including taking down old pipes.
6
-
-
... More
All as per item No 217 here in above, but 40mm dia complete all as specified and directed.
30
-
-
... More
All as per item No 217 here in above, but 25mm dia complete all as specified and directed.
40
-
-
... More
Supply and fixing 50 mm outer dia CPVC Ball valves complete all as specified and directed including taking down old valve.
1
-
-
... More
All as per item No 217 here in above, but 40 mm bore valve..complete all as specified and directed.
2
-
-
... More
All as per item No 217 here in above, but 25 mm bore valve.complete all as specified and directed.
1
-
-
... More
Material and labour, plain cement concrete (1:3:6) type C2 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed.
0.5
-
-
... More
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip25x4 mmas earth lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion
1
-
-
... More
Supply and fixing in repair rotational moulded polyethylene water storage tanks 4 layer of cap 5000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.
3
-
-
... More
Supply and fixing LT panel outdoor meter board made of Polycarbonate thermoplastic enclosures.Environment friendly, recyclable, UV resistant, halogen & silicon free, anti acid & anticorrosive. The Degree of Ingress Protection IP 65 shall be in accordance with IEC 60529.
The gasket material shall be Polyurethane; while the gasket shall be internally
embedded. Comprising of the following. The meter board shall be fully wired as per
latest electrical standards with canopy ready to use.
Incomer :
200A FP 36 kA MCCB – 1 No
Digital MFM – 1 No
200/5A CTs – 4 Nos
RYB indication lamps – 1Set
4A 10 KA Control SP MCB – 3 Nos
Outgoings
32/40A TPN MCCB 25 KA – 3 Nos Digital ammeter with selector switch and CTs – 3 Nos
15 HP Fully automatic star delta starter – 4 Nos
15 HP Starter comprising of the following.
Overload, Under volt, over volt protections, digital ammeter with CTs.
Automanual selector switch, Start Stop push button, ON/OFF indication lamps.
The panel board shall be fully wired as per latest electrical standards and ready to use at site with floor mounting frame and canopy.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements