Kerala State IT Infrastructure Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 5,650Tender Fee
Refer Documents
Summary
Composite Interior Works For Office Space And Guest House Below Water Tank At Cyberpark, Kozhikode.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_KSITI_328761_1Bid Award Id
ViewTender No
KSITIL/CP/2019-20/20Tender Authority
Kerala State IT Infrastructure Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
od135786/2019_2020 : "Providing & fixing Wall Panelling as per Drawings, in general, with 12 mm thick comm. ply and finished with 6mm thick lacquered glass of app. make and of approved shade as per pattern and details given in drawing. The lacquered glass shall be fixed using 3M double-sided tape or clear, neutral Silicone sealant. The edges shall be chamfered so as to get 'V'-Groove with the adjoining glass panel.The panelling shall be as per the Elevation drawing with the required cut-outs for the electrical switch plates and LCD TV, etc all complete as directed and to the satisfaction of the Architect / Client. Rate to include all wastages, necessary supports & backing to ensure rigidity, levels & plumb, etc complete.<br><br>(Note: Shop drawing shall be submitted to Architect for approval before fixing the glass)."<br><br>b) for 6mm thick lacquered glass fixed over 12mm comm. Ply panelling base fixed over masonry walls (rate to be considered inclusive of 12mm ply, all hardware, treatment of base surface, etc, complete).
13.424
-
-
... More
od135918/2019_2020 : "Providing & fixing Wall Panelling of various thicknesses as per Drawings, in general, it shall be made out of Exterior Grade MDF. Rate to include all wastages, levelling of the base surface for proper plumb, etc complete and as directed.<br><br>(Note: Only the Front Elevation area shall be considered for measurement)"<br><br>"a) for 12mm thick Exterior Grade MDF finished on all sides with Vinyl Graphics of approved design over 2 coats putty, and 1 coat oil primer with smooth finish as prepared surface, all complete and as directed.<br>(Rate inclusive of Vinyl Graphics - specs as per Item F6)"<br>
9.685
-
-
... More
od135788/2019_2020 : "Providing & fixing Wall Panelling of various thicknesses as per Drawings, in general, it shall be made out of Exterior Grade MDF. Rate to include all wastages, levelling of the base surface for proper plumb, etc complete and as directed.<br><br>(Note: Only the Front Elevation area shall be considered for measurement)"<br><br>"b) for 12mm thick Exterior Grade MDF finished on all sides with Wallpaper of approved design over 2 coats putty, and 1 coat oil primer with smooth finish as prepared surface, all complete and as directed.<br>(Basic Rate of Wallpaper : Rs. 60/- per sft.))"<br>
26.017
-
-
... More
od163345/2019_2020 : Wall Panelling - Ply with Laminate<br>"Providing & fixing Wall Panelling of 12 mm comm. ply as per Drawings, and finished with 1mm laminate of app. design, all complete and as directed. The exposed edge thickness shall be finished with T.W beading and polished to matching shade of the laminate. Rate to include all wastages, levelling of the base surface for proper plumb, etc complete and as directed.<br><br>(Note: Only the Front Elevation area shall be considered for measurement)"<br>
16.901
-
-
... More
od135790/2019_2020 : Providing and fixing of 6mm mirror over 12mm PVC panel of approved make with S.S studs at Handwash area. The mirror shall be provided with polythene sheet backing so as to avoid direct contact of moisture with the silver coating on the mirror rear side. Rate shall be inclusive of all hardware, labour, etc, complete.<br>
1.68
-
-
... More
od135792/2019_2020 : "Providing and Fixing of Storage unit below wash basin counters as per Drawings. In general, the storage unit shall be made of 19mm thick PVC panel of approved make on all sides, and shall include 1 adjustable 19mm PVC panel shelf inside. All exposed surfaces shall be finished with 1mm laminate of approved shade, and all inner / recessed PVC panel surfaces shall be left exposed.<br><br>Rate to include all hardware, tower bolt, magnetic catch, heavy duty hinges, S.S handles - of approved make, including locking arrangements with master key of approved make etc. complete."<br>"Rate to include for 50mm end granite beading along the outer perimeter of the counter-top. The beading shall have R-10 corner edges along the top and bottom edges as per the drawing. Rate to include all hardware, MS brackets for support from the masonry wall, etc complete. Rate to include cutting of counter-top for accomodating the Washbasin bowl and CP fittings, and fixing the granite end beading with bull nosing to the cut-perimeter to neat finish.<br><br>Basic rate of Granite : Rs.170/- per sft."<br>Note: Only the Front Elevation area shall be considered for Measurement.<br>
0.835
-
-
... More
od135794/2019_2020 : "Providing and fixing Storage unit in Conference room of 600 mm depth and 750 mm height as per Drawing, but in general, it shall be made out of 19 mm thick commercial plywood on all sides. The countertop shal be finished with 19mm thick granite. The storage unit shall include 1 no. of adjustable intermediate shelf made of 19mm comm. plywood placed on necessary S.S stud supports. The openable shutter shall be FACTORY-FINISHED and made out of 19mm thick comm. plywood with necessary teakwood lipping, supports, etc complete and finished with 1mm laminate of approved shade. Rate shall include for providing Granite Beading of size 40 x 15mm at top level etc. complete as per drawing. All inner / recessed surfaces shall be painted with sealer finish. Rate to include all hardware, S.S tower bolt, magnetic catch, heavy duty hinges, S.S handles - of approved make, including locking arrangements with master key of approved make etc. complete.<br><br>Note: Only the Front Elevation area shall be considered for Measurement.<br><br>Basic rate of Granite = Rs.170/- per sft."<br>
1.284
-
-
... More
od135796/2019_2020 : "Providing & Fixing Pantry counter with storage as per Drg., in general, the storage shall be of 600mm depth and 850 mm height. The cabinets & shutters shall be FACTORY-FINISHED and made of 19mm PVC panel finished with 1mm laminate of approved shade. The storage unit shall include 1 no. of adjustable intermediate shelves as per the drawing made of 19mm PVC panel placed on necessary S.S stud supports. Rate to include all hardware, tower bolt, magnetic catch, heavy duty hinges, S.S handles - of approved make, including locking arrangements with master key of approved make etc. complete.<br><br>Note: Only the Front Elevation area shall be considered for Measurement."<br>"Rate to include for Providing & fixing 19mm thick Granite counter-top of approved shade over 19mm thick BWR ply. Rate to include for 40x15mm end granite beading along the outer perimeter of the counter-top. The beading shall have R-5 corner edges along the top and bottom edges as per the drawing. Rate to include all hardware, etc complete. Rate to include cutting of counter-top for accomodating the S.S sink and CP fittings and fixing the end beading to the cut-perimeter to neat finish.<br><br>Basic rate of Granite : Rs.170/- per sft.<br><br>Note: Only the clear plan area shall be considered for measurement."<br>
3.96
-
-
... More
od135797/2019_2020 : "Providing & fixing Column Cladding as per Drg., in general, it shall be made out of aluminium box frame of size 100 x 50 mm x 1.5mm guage thickness covered with 12.5 mm thick gypboard to required shape as per the detail drawing. Exposed portions of the gypsum board panelling shall be finished with 2 coats of low VOC Premium emulsion paint of approved make and shade over 1 coat of primer suitable for MDF & 2 coats of acrylic putty, and all as per manufacturer’s specification etc complete and all as directed. Rate to include all hardware, wastages, etc complete.<br><br>Note: Only the clear front elevation of all the Column sides shall be considered for measurement."<br>
86.724
-
-
... More
od135798/2019_2020 : Providing and fixing Pelmet for concealing the pull-down projector screens. The pelmet shall be made of 19mm thick comm. ply finished with enamel paint of approved shade. It shall be of 'U' shape of size 150 x 150 mm and its bottom level shall be fixed flush with the adjoining false ceiling level so as to recess the pelmet. Rate to include all hardware and supports for sufficient rigidity and to receive the false ceiling perimeter channels.<br>
4.97
-
-
... More
od135799/2019_2020 : "Providing and Fixing Decorative Wall Border in the Reception Back Wall as per Drawing, made of 40 x 75 mm thick exterior grade MDF. In general , this shall be made of 2# of 19mm MDF and exposed edge shall be fixed with 6mm thick MDF beading with chamfered edges. All the MDF surfaces shall be finished with Duco paint of approved shade as per manufacturer specifications so as to achieve a uniform and even surface finish, to the satisfaction of the Architect / Client.<br>Rate shall be inclusive of preparation of the base surface, all hardware, etc, complete."<br>
8.88
-
-
... More
od135800/2019_2020 : Providing and Fixing Planter Box stand of 450 x 450mm size and 600mm height as per Drawing, made of 19mm comm. ply and finished with 1mm laminate of app. design. The top countertop of the Planter box shall be recessed by 50mm. The profile of the Planter box shall be adjusted as per the available site conditions. Rate shall be inclusive of all hardware, wastages, etc, complete.<br>
10
-
-
... More
od159885/2019_2020 : Providing and fixing 100 mm overall thickness partition with 12.5 mm thick double skin tapered edged Gypsum board conforming to IS:2095: Part 1 upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling/roof truss at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher.<br>Fixing of channels shall also provide for suitable attachment of fixtures to the partitions and the perimeter of openings should be packed with best quality treated Malaysian Sal wood to required size and shape with 2 coats of fire proof paint over a coat of anti-termite treatment / anti-corrosive primer to receive screws / anchor fasteners to fix Joinery frame in position etc. complete. Rate shall include supply & fixing of Gypboard on both sides of the frame work vertically spanning from floor to ceiling fixed with dry wall screws to a suitable dia and length at every 300 mm c/c. The screws should be of zinc chromium plated, self drilling etc. The joints between the gyp-boards shall be finished flush and even with jointing compound and paper tape and the surface shall be painted with 2 coats of low VOC Premium emulsion paint of approved make and shade over 1 coat of primer suitable for gyp-board & 2 coats of acrylic putty, and all as per manufacturer’s specification etc complete and all as directed.<br>"Rate shall include necessary arrangement to ensure proper anchorage / fixing using diagonal struts for bracing from the RCC Roof to get sufficient rigidity (to the required level) .<br><br>Note : Only the clear elevation area below the false ceiling level shall be considered for measurement."<br>a) Both sides gypboard<br>
143.38
-
-
... More
od159886/2019_2020 : Providing and fixing 100 mm overall thickness partition with 12.5 mm thick double skin tapered edged Gypsum board conforming to IS:2095: Part 1 upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/ sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling/roof truss at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher.<br>Fixing of channels shall also provide for suitable attachment of fixtures to the partitions and the perimeter of openings should be packed with best quality treated Malaysian Sal wood to required size and shape with 2 coats of fire proof paint over a coat of anti-termite treatment / anti-corrosive primer to receive screws / anchor fasteners to fix Joinery frame in position etc. complete. Rate shall include supply & fixing of Gypboard on both sides of the frame work vertically spanning from floor to ceiling fixed with dry wall screws to a suitable dia and length at every 300 mm c/c. The screws should be of zinc chromium plated, self drilling etc. The joints between the gyp-boards shall be finished flush and even with jointing compound and paper tape and the surface shall be painted with 2 coats of low VOC Premium emulsion paint of approved make and shade over 1 coat of primer suitable for gyp-board & 2 coats of acrylic putty, and all as per manufacturer’s specification etc complete and all as directed.<br>"Rate shall include necessary arrangement to ensure proper anchorage / fixing using diagonal struts for bracing from the RCC Roof to get sufficient rigidity (to the required level) .<br><br>Note : Only the clear elevation area below the false ceiling level shall be considered for measurement."<br>b) Only 1 side gypboard<br><br>
16.358
-
-
... More
od159887/2019_2020 : One-side Gypboard & One-side Ply Partition"Providing and fixing of full-height partition as per Drawing using 50x25mm Aluminium box section of 1.6mm guage thickness at 600mm c/c in both horizontal and vertical directions, and with 12mm thick commercial Plywood on one side and 12.5mm thick gypboard on the other side.The plywood side of the partition shall be left unfinished.The gypboard side of the partition shall be constructed and finished as per the gypboard partition specifications given in Item B1 above.""Rate shall include provision of necessary rigidity and good quality Malaysian Sal wooden filling at corners and trims to receive hardware as necessary. The wood shall be treated with 2 coats of fire proof paint over a coat of anti-termite treatment / anti-corrosive primer to receive screws / anchor fasteners to fix Joinery frame in position etc. complete. Rate shall also include necessary arrangement to ensure proper anchorage / fixing from the ceiling to get sufficient rigidity (to the required level).Note : Only the clear elevation area below the false ceiling level shall be considered for measurement."
15.456
-
-
... More
od159888/2019_2020 : "Providing and fixing of full-height partition as per Drawing using 50x25mm Aluminium box section of 1.6mm guage thickness at 600mm c/c in both horizontal and vertical directions, and with 12mm thick commercial Plywood on both sides.<br><br>The plywood side of the partition shall be left unfinished."<br>"Rate shall include provision of necessary rigidity and good quality Malaysian Sal wooden filling at corners and trims to receive hardware as necessary. The wood shall be treated with 2 coats of fire proof paint over a coat of anti-termite treatment / anti-corrosive primer to receive screws / anchor fasteners to fix Joinery frame in position etc. complete. Rate shall also include necessary arrangement to ensure proper anchorage / fixing from the ceiling to get sufficient rigidity (to the required level).<br><br>Note : Only the clear elevation area below the false ceiling level shall be considered for measurement."<br>
1
-
-
... More
od159889/2019_2020 : Providing and fixing Single glazed partitions of 10mm thick toughened glass as per Drawings using Full Height WALL LINE partition systems or approved equivalent and shall be able to provide a sound reduction of 36dB. The glass panels shall be supported by Aluminium WCP Profiles of 25x45mm on all 4 sides of the Glass partition perimeter. Glass-to-glass butt joints shall be done using Aluminium ' I ' profile of 5x11mm, and corner glass junctions to have 90° corner Aluminium profile. At Glass perpendicular 'T' junctions, Aluminium T-junction profile to be used. Finishes of all aluminium frame components shall be Natural Anodized Finished (20 microns).<br>Rate shall include for providing and fixing necessary support arrangement to ensure proper anchorage / fixing from the ceiling to get sufficient rigidity (to the required level).<br>"Rate shall include for transport charges, handling, loading and unloading, installation of glass and protecting the module and glass till handing over, testing, commissioning all necessary hardwares, Structural supports, etc. complete and all as per manufacturers specifications as directed.<br><br>Note : Only the clear elevation area below the false ceiling level shall be considered for measurement."<br>
13.39
-
-
... More
od159890/2019_2020 : Partition closing above false ceiling level<br>Partition closing above false ceiling upto true ceiling height as per Drawing with 12.5 mm thick gypsum board as specified in items B1, B2, B3 & B4 above, but on single side only. The panelled surface shall be painted with enamel paint of approved make and shade over a coat of cement primer and all as directed.<br>
113.087
-
-
... More
od159891/2019_2020 : Glass wool Insulation<br>Extra rate over and above for providing & fixing Resin bonded Glass wool of OwensCorning or approved equivalent make and of 50mm thickness (acoustic insulation material), wrapped in Hessein paper, and of density of 48 kg/cu.m. in partitions as shown in the drawings and as per Architect's instructions to make it as sound proof. In partition above false ceiling areas, the glass wool shall be laid with chicken mesh screwed on the outer side to keep the glass wool in place.<br>
265.43
-
-
... More
od159892/2019_2020 : Gypboard Ceiling<br>Providing and fixing false ceiling at all height including providing and fixing of framework made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge.<br>Rate shall include for finishing the ceiling surface with 2 coats of low VOC Premium emulsion paint of approved make & shade over 2 coats of acrylic putty, and all as per manufacturer’s specification etc complete and all as directed.<br>"Rate shall include providing additional trimming around cutouts for light fittings, cove lighting arrangement and grills and providing additional supports from ceiling where main / cross members are cut for light fittings etc. No extra cost shall be paid for providing multilevel false ceiling, cove lighting arrangement etc. as per drawing .<br><br>Note : Horizontal area only will be measured for payment."<br>
260.92
-
-
... More
od159893/2019_2020 : Perforated G.I Metal Ceiling - 600 x 600 mm Tile<br>"Providing & Fixing of Armstrong or approved equivalent GI Lay-in Standard Perforated (2.5mm diameter-16% open area) metal ceiling consisting of 600x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color with Soundtex acoustical fleece hot pressed to the back of the perforated tile to be laid on Armstrong grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees. <br>The tiles would have NRC of 0.70, Fire Performance of Class A2-s1.d0 as per EN13501 standard in module size of 600 X 600 mm suitable for Green Building application, with Recycled content of 25%. <br>The grid should be of “Armstrong” make with 15mm wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 mm & 600 mm Cross Tees with Hardened XL2 Clip having a web height of 38 mm and a load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams per M2 with pull out strength of 100 Kgs. Suspension system for Armstrong grid to be of Armstrong make, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge.<br>"<br>
145.72
-
-
... More
od159894/2019_2020 : Perforated G.I Metal Ceiling - 1200 x 600 mm Tile<br>"Providing & Fixing of Armstrong or approved equivalent GI Lay-in Standard Perforated (2.5mm diameter-16% open area) metal ceiling consisting of 1200x600mm Lay in tiles of pre coated galvanized steel in 0.5 mm thickness in Global white color with Soundtex acoustical fleece hot pressed to the back of the perforated tile to be laid on Armstrong grid systems with 15mm wide T - section flanges color white having rotary stitching on the Main Runner, 1200 mm & 600 mm Cross Tees. <br>The tiles would have NRC of 0.70, Fire Performance of Class A2-s1.d0 as per EN13501 standard in module size of 600 X 600 mm suitable for Green Building application, with Recycled content of 25%. <br>The grid should be of “Armstrong” make with 15mm wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 mm & 600 mm Cross Tees with Hardened XL2 Clip having a web height of 38 mm and a load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams per M2 with pull out strength of 100 Kgs. Suspension system for Armstrong grid to be of Armstrong make, all complete at all heights as per specifications drawings and as directed by Engineer-in-charge.<br>"<br>
13.86
-
-
... More
od163578/2019_2020 : Aluminium Axiom - 50mm<br>Providing & fixing Classic Axiom Perimeter Trim manufactured by Armstrong World Industries (India) Pvt. Ltd. Or approved Equiivalent as per the following specifications:-<br>"Components: -<br>1. Axiom Trim Channel :<br>Classic Axiom trim (AX2STR42): 50mmwide face with 19.3mm(+/-0.50mm) horizontal legs, straight sections with special bosses formed for attachment to the Axiom tee-bar connection clip or hanging clip, extruded Aluminum, factory finished (minimum 50 microns factory - applied baked polyester paint).Aluminum Extrusions formed with distinct architectural detail groove on top and bottom flanges and special bosses to receive the tee bar connection clips and splice plates, to provide positive mechanical lock with no visible fasteners."<br>2. Axiom Splice Plate (AX4SPLICE/AXSPLICE): Formed to fit into special bosses in the Axiom and locked in place with factory-installed screws. These Steel splice plates (AX4SPLICE) are used to align and secure all joints between sections of Axiom trims. Each joint in the 50mm section height/ Knife Edge will require one splice plate whereas 100 mm & 150mm Axiom trims will require 2 splice plate at each joint. Corners are to be formed by mitering the end of axiom and splice plate (AXSPLICE) to be bent at right angle for connecting the end pieces.<br>"3. Axiom Tee-Bar Connection Clip (AXTBC): Commercial quality G.I formed to fit into special bosses and locked in place by factory-installed screws and attached to Armstrong (XL-24 / XL-15/Silhouette/Interlude) suspension system members. T-Bar connection clips are used to attach the Axiom to the supporting Suspension system members. These two-piece Aluminum clips are supplied as an assembled unit with the steel locking screw factory installed. One clip is required at each location where the grid system intersects the Axiom trim.<br><br>4. Hanging Grid clips(AXHGC):Classic axioms to be hung independently to the structural soffit by engaging the Hanging Grid Clip into the bosses of the Axiom trim channel and securing it to structural soffit using aircraft cables/GI wire."<br>"Installation Procedure:<br>1. Hang the sections of Axiom Trim onto the grid system by engaging the top ear of the connection clip under the boss of the channel trim. Slide the lower leg downward to engage the lower boss on the trim and secure by tightening the locking screw.<br>2. Complete the installation of all channel trims sections. Install and secure the splice plates, corner pieces, alignment plates etc. For additional support and stability, use hanging grid clips to suspend from structural soffit.<br>3. Make adjustments as necessary to properly align the complete installation."<br>
53.5
-
-
... More
od159895/2019_2020 : Acoustic PET Panel - Baffle Ceiling<br>"Supply & Fixing of suspended Baffle ceiling made of 9mm thick PET Acoustic Panels of approved make as per Drawings with S.S string support from ceiling and with 'U'-profile support. The size of the baffles shall be 100mm height and fixed @ 100mm c/c. The rate shall be inclusive of the necessary supports from the true ceiling level, all wastages, etc complete and as directed.<br>(Note : Only the Plan Area shall be considered for measurement)"<br>
18.48
-
-
... More
11.46.2 : Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
462.99
-
-
... More
11.36 : Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
32.343
-
-
... More
od159898/2019_2020 : Aluminium Modular Skirting<br>Providing and fixing 100mm height Aluminium Modular skirting of WALL LINE / approved equivalent make at Masonry walls & Partitions, and of approved shape & profile . The systems shall be of complete aluminium type including capping strips. It shall be made of extruded aluminium of 1.3mm gauge avg. & anodized to 20 microns avg. Rate to include supply & installation of matching colour corner guards. Rate to include all hardware, etc complete.<br>
390.18
-
-
... More
od159899/2019_2020 : Glass Doors - Aluminium Framed System with Side Hinge<br>Providing & fixing Style-less Glass doors as per Drawing with WALL LINE / approved equivalent make of Aluminium door frames of size 40x92mm. The frame finish shall be natural Anodized of 20 microns. The hardware set shall be inclusive of matching heavy duty self-closing side hinges of Geze / approved equivalent make - 4 nos. per door, side horizontal lever handle with lock, Door closer of matching finish (Slim pelmet-arm type of suitable load capacity), etc complete. Glass shall be 12mm thick toughened glass. Edges of glass shall be provided and fixed with Door Seal so as to provide acoustic sealing of the door opening. Rate shall include for transport charges, handling, loading and unloading, testing & commissioning of hardware, installation of glass, protection until handover, etc complete.<br>Note : Shop drawing shall be submitted to Architect for Approval before procurement.<br>a) For Single leaf door of size 1050 mm width and 2400 mm height as per the above specifications.
2
-
-
... More
od163597/2019_2020 : Glass Doors - Aluminium Framed System with Side Hinge<br>Providing & fixing Style-less Glass doors as per Drawing with WALL LINE / approved equivalent make of Aluminium door frames of size 40x92mm. The frame finish shall be natural Anodized of 20 microns. The hardware set shall be inclusive of matching heavy duty self-closing side hinges of Geze / approved equivalent make - 4 nos. per door, side horizontal lever handle with lock, Door closer of matching finish (Slim pelmet-arm type of suitable load capacity), etc complete. Glass shall be 12mm thick toughened glass. Edges of glass shall be provided and fixed with Door Seal so as to provide acoustic sealing of the door opening. Rate shall include for transport charges, handling, loading and unloading, testing & commissioning of hardware, installation of glass, protection until handover, etc complete.<br>Note : Shop drawing shall be submitted to Architect for Approval before procurement.<br>b) For Single leaf door of size 900 mm width and 2400 mm height as per the above specifications.<br>
6
-
-
... More
od159900/2019_2020 : Glass Doors - Aluminium Framed System with Patch fittings & Floor Spring<br>Providing & fixing Style-less Glass doors as per Drawing with S.S Patch fitting of approved make, heavy duty floor spring, floor lock, lock plate, S.S 'H' handle of 600 mm hole-to-hole height, etc. Glass shall be 12mm thick toughened glass. Rate shall include for transport charges, handling, loading and unloading, testing & commissioning of hardware, installation of glass, protection until handover, etc complete.<br>Note : Shop drawing shall be submitted to Architect for Approval before procurement.<br>"a)for Single leaf door of size 1050 mm width and 2400 mm height<br>(but considering 600mm H-handle and Floor Lock instead of Studio Lock specified above)"<br>
1
-
-
... More
od163611/2019_2020 : Glass Doors - Aluminium Framed System with Patch fittings & Floor Spring<br>Providing & fixing Style-less Glass doors as per Drawing with S.S Patch fitting of approved make, heavy duty floor spring, floor lock, lock plate, S.S 'H' handle of 600 mm hole-to-hole height, etc. Glass shall be 12mm thick toughened glass. Rate shall include for transport charges, handling, loading and unloading, testing & commissioning of hardware, installation of glass, protection until handover, etc complete.<br>Note : Shop drawing shall be submitted to Architect for Approval before procurement.<br>b) For only Fixing of the existing Glass Door, including shifting of the door from the existing location in the Main Building and fixing of all hardware, etc complete.<br>
1
-
-
... More
od163669/2019_2020 : Glass Doors - Aluminium Framed System with Patch fittings & Floor Spring<br>Providing & fixing Style-less Glass doors as per Drawing with S.S Patch fitting of approved make, heavy duty floor spring, floor lock, lock plate, S.S 'H' handle of 600 mm hole-to-hole height, etc. Glass shall be 12mm thick toughened glass. Rate shall include for transport charges, handling, loading and unloading, testing & commissioning of hardware, installation of glass, protection until handover, etc complete.<br>Note : Shop drawing shall be submitted to Architect for Approval before procurement.<br>c) For supply of Glass Door hardware of approved make including S.S Patch fitting, heavy duty floor spring, floor lock, lock plate, S.S 'H' handle of 600 mm hole-to-hole height, etc.<br>
1
-
-
... More
od159901/2019_2020 : Fire Door (2-hr rated)<br>Providing and fixing of 2-hour rated Hollow metal fire door with Vision Panel as per Drawing of fully flush type of 46 mm thick shutter of pressed Galvanised steel Double leaf Guardian of approved make, which consists of frame, shutter, infill and finish as detailed below and conforming to IS:277.<br>Door frame shall be double rebate profile of size 143 x 57 mm with bending radius of 1.4 mm having 1.6 mm thick galvanised steel sheet (16 gauge ) with steel door shutter of 46 mm thick fully flush, double skin door shall manufactured from 1.25 mm thick galvanised steel sheet (18 gauge).The infill material shall be resin bonded honey comb paper with thermal insulation. Door frames and shutter shall be finished with etched primer coating, stored zinc phosphate primer and thermosetting synthetic enamel paint (35 micron DFT) of approved colour.<br>The rate shall include for supply and fixing of 3 mm thick base plates, all joints of frames with provision for anchor bolt fixing to wall / partition / RC surface, reinforcement pad for fixing of door closers of approved make, factory finish pre-punched cut outs to receive hardwares and iron mongery, 3mm thick hinge plates predrilled to receive hinges for screw mounted fixing, stainless steel double bearing butt hinges of size 102 x 89 x 3 mm thick, mortice sash lock with 5 pin tubular brass cylinder 70 mm thick with internal thumb / knob operation and external key provision with knob, brass / nickel lever handles and heavy duty automatic door closer of approved make. Rate shall also include for grouting the frame with cement slurry including providing necessary Hilti make Elastic fire stop Sealent - code no CP 601 & 601S at the Joints between Wall & Frame to the required thickness and to be applied by using Dispensor tool CS 201 P1as per manufacture's specification etc complete and as directed.<br>"Rate shall be inclusive of providing and fixing Vision Panel of size 200 x 300mm of approved make fire rated glass :-<br>Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions<br>etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-incharge. The glass shall be clear, toughened, interlayered, non-wired fire resistant having 11 mm thickness of approved brand with 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 15 min of insulation (EI15) and having a sound reduction of ?37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category of Impact Resistance as per EN 12600. The glass should be manufactured in UL & TUV audited Facility and including UL-EU Certification.The maximum glazing size cannot be more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report for the complete system (Glazed Door or Partition) will be considered valid only if it contains the stamp and signature of the authorized signatory from the glass manufacturer.<br>(Actual glass size is to be measured at site for payments)."<br>Rate shall be inclusive of making cut-outs, provisions, etc for receiving Access Control provision.<br>For Single leaf Door of size 1200 x 2400 mm with S.S 'H' handle of 600 mm height<br>
1
-
-
... More
od159902/2019_2020 : Providing and fixing in position Factory-finished Flush Doors as per Drawing with WALL LINE / approved equivalent make of Aluminium door frames of size 40x92mm. The frame finish shall be natural Anodized of 20 microns. Rate shall be inclusive of providing and fixing 35mm thick Factory-made Flush Door Shutters single leaf or two leaves solid core bonded with phenol formaldehyde synthetic resin thermo pressed with 8mm thick teak wood external lipping.<br>The construction procedure of the shutter should be as per clause no.6 of IS 2202 (latest issue). The shutter shall be shop prepared for taking mortice lock or latches. Suitable lock block of wood may be provided for fixing the hardware. The size of block, shall perfectly correspond to the maximum size of lock covered in IS 2209 (latest issue). All the four edges of the door shutter shall be square. The shutter shall be free from twist or warp in its plane and of required size etc. complete as directed. Shutter to be finished with 1mm laminate of approved shade on both sides.<br>"Door shutters are to be fitted with the following hardware:-<br>* 3 Nos. of S.S butt hinges - 125 mm<br>* Door set mortice lock with S.S plate - 6 levers - 1 No.<br>* Nylon door buffer of 35 mm dia - 1 No.<br>* S.S 'H' handle of 600 mm height - 1 No.<br>* S.S Door closer - 1 No. (slim pelmet arm type and of suitable load capacity)"<br>a) Single leaf door of size 1000 mm width and 2400 mm height with Vision Panel as per drawing<br>
3
-
-
... More
od159903/2019_2020 : Providing and fixing in position Factory-finished Flush Doors as per Drawing with WALL LINE / approved equivalent make of Aluminium door frames of size 40x92mm. The frame finish shall be natural Anodized of 20 microns. Rate shall be inclusive of providing and fixing 35mm thick Factory-made Flush Door Shutters single leaf or two leaves solid core bonded with phenol formaldehyde synthetic resin thermo pressed with 8mm thick teak wood external lipping.<br>The construction procedure of the shutter should be as per clause no.6 of IS 2202 (latest issue). The shutter shall be shop prepared for taking mortice lock or latches. Suitable lock block of wood may be provided for fixing the hardware. The size of block, shall perfectly correspond to the maximum size of lock covered in IS 2209 (latest issue). All the four edges of the door shutter shall be square. The shutter shall be free from twist or warp in its plane and of required size etc. complete as directed. Shutter to be finished with 1mm laminate of approved shade on both sides.<br>"Door shutters are to be fitted with the following hardware:-<br>* 3 Nos. of S.S butt hinges - 125 mm<br>* Door set mortice lock with S.S plate - 6 levers - 1 No.<br>* Nylon door buffer of 35 mm dia - 1 No.<br>* S.S 'H' handle of 600 mm height - 1 No.<br>* S.S Door closer - 1 No. (slim pelmet arm type and of suitable load capacity)"<br>b) Single leaf door of size 1000 / 1050 mm width and 2400 mm height without Vision Panel as per drawing<br>
8
-
-
... More
od159929/2019_2020 : Providing and fixing in position Factory-finished Flush Doors as per Drawing with WALL LINE / approved equivalent make of Aluminium door frames of size 40x92mm. The frame finish shall be natural Anodized of 20 microns. Rate shall be inclusive of providing and fixing 35mm thick Factory-made Flush Door Shutters single leaf or two leaves solid core bonded with phenol formaldehyde synthetic resin thermo pressed with 8mm thick teak wood external lipping.<br>The construction procedure of the shutter should be as per clause no.6 of IS 2202 (latest issue). The shutter shall be shop prepared for taking mortice lock or latches. Suitable lock block of wood may be provided for fixing the hardware. The size of block, shall perfectly correspond to the maximum size of lock covered in IS 2209 (latest issue). All the four edges of the door shutter shall be square. The shutter shall be free from twist or warp in its plane and of required size etc. complete as directed. Shutter to be finished with 1mm laminate of approved shade on both sides.<br>"Door shutters are to be fitted with the following hardware:-<br>* 3 Nos. of S.S butt hinges - 125 mm<br>* Door set mortice lock with S.S plate - 6 levers - 1 No.<br>* Nylon door buffer of 35 mm dia - 1 No.<br>* S.S 'H' handle of 600 mm height - 1 No.<br>* S.S Door closer - 1 No. (slim pelmet arm type and of suitable load capacity)"<br>c) Single leaf door of size 1200 mm width and 2400 mm height without Vision Panel as per drawing<br>
1
-
-
... More
od159904/2019_2020 : Providing and fixing in position Factory-finished Flush Doors as per Drawing with WALL LINE / approved equivalent make of Aluminium door frames of size 40x92mm. The frame finish shall be natural Anodized of 20 microns. Rate shall be inclusive of providing and fixing 35mm thick Factory-made Flush Door Shutters single leaf or two leaves solid core bonded with phenol formaldehyde synthetic resin thermo pressed with 8mm thick teak wood external lipping.<br>The construction procedure of the shutter should be as per clause no.6 of IS 2202 (latest issue). The shutter shall be shop prepared for taking mortice lock or latches. Suitable lock block of wood may be provided for fixing the hardware. The size of block, shall perfectly correspond to the maximum size of lock covered in IS 2209 (latest issue). All the four edges of the door shutter shall be square. The shutter shall be free from twist or warp in its plane and of required size etc. complete as directed. Shutter to be finished with 1mm laminate of approved shade on both sides.<br>"Door shutters are to be fitted with the following hardware:-<br>* 3 Nos. of S.S butt hinges - 125 mm<br>* Door set mortice lock with S.S plate - 6 levers - 1 No.<br>* Nylon door buffer of 35 mm dia - 1 No.<br>* S.S 'H' handle of 600 mm height - 1 No.<br>* S.S Door closer - 1 No. (slim pelmet arm type and of suitable load capacity)"<br>d) Single leaf door of size 900 mm width and 2400 mm height without Vision Panel as per drawing<br>
2
-
-
... More
od163712/2019_2020 : Roller Blinds - Blockout Fabric<br>Providing and fixing of Roller Blinds of approved make with total Block-out Fabric of approved shade made of 100% polyester, Fabric width upto 200/250 cm, Fabric weight 290-310 g/sq.m, Thickness 0.57mm and Colour Fastness > 6, installed as per Manufacturer's instruction.<br>
111.706
-
-
... More
od159905/2019_2020 : Acoustic Panel - PET<br>"Supply & Fixing of 9mm thick PET Acoustic Panels of approved make on Partition / Masonry wall surface as per Drawings and as directed using appropriate adhesive as per manufacturer instructions. The rate shall be inclusive of preparing the base surface, all wastages, etc.<br><br>Note : Only the actual installed area shall be measured for payment."<br>
59.256
-
-
... More
od159906/2019_2020 : Decorative Acoustic Panel Divider - PET<br>Supply & Fixing of free-standing suspended Designer laser-cut 9mm thick PET Acoustic Panels of approved make as per Drawings with S.S string support from ceiling and with 'U'-profile support. Rate shall also be inclusive of S.S 304 leg supports (2 nos. per panel) fixed from the floor level. The size of each panel shall be 900mm X 1850mm X 9mm. The rate shall be inclusive of the necessary supports from the true ceiling level, all wastages, etc complete and as directed.<br>
3
-
-
... More
od159907/2019_2020 : Glass Etching Film (Frosted)<br>"Providing and fixing etching to glass panels using 3M frosted film (sparkling type) of Code No. 7725 with 15 years warranty, as per required pattern and design and as directed. Rate shall be inclusive of all wastages, etc.<br><br>Note : Only the actual installed area shall be measured for payment."<br>
18.21
-
-
... More
od159908/2019_2020 : Glass Etching Film (Frosted printed colour graphics)<br>"Providing and fixing etching to glass panels using 3M film (Code No. 7725 with 5 years warranty) of approved color printed graphics as directed. Rate shall be inclusive of all wastages, etc.<br><br>Note : Only the actual installed area shall be measured for payment."<br>
5
-
-
... More
od159909/2019_2020 : Vinyl Graphics<br>"Providing and fixing of Vinyl Graphics on walls / partitions using 3M film (Code No. IJ180C with 5 years warranty) as per approved design and at specified locations as directed by Architect / Client. The rate shall be inclusive of preparing the base surface with 2 coats putty, and 1 coat oil primer with smooth finish, all complete and as directed. Rate shall be inclusive of all wastages, etc.<br><br>Note : Only the actual installed area shall be measured for payment."<br>
34.439
-
-
... More
od159910/2019_2020 : Wallpaper<br>"Providing and laying of premium quality Wallpaper of approved make and design over partition / panelling / wall surfaces. Rate to include preparation of base surface with 2 coats putty, and 1 coat oil primer with smooth finish, all complete and as directed. Rate shall be inclusive of all wastages, etc.<br><br>Note : Only the actual installed area shall be measured for payment.<br><br>Note : Basic rate of Wallpaper = Rs.60/- per sft."<br>
101.992
-
-
... More
od159911/2019_2020 : Aluminium Channel Groove<br>Providing and Fixing of Anodised Aluminium 5mm Groove channels (Hat section) of approved make in natural anodized finish, as per drawing and as directed. Rate shall be inclusive of all hardware, wastages, etc complete and as directed.<br>
61.38
-
-
... More
od159912/2019_2020 : Aluminium Corner Guard<br>Providing and Fixing of Anodised Aluminium 12 x 12 mm Corner Guards of approved make in natural anodized finish, as per drawing and as directed. Rate shall be inclusive of all hardware, wastages, etc complete and as directed.<br>
14.85
-
-
... More
od159913/2019_2020 : Aluminium Recessed Pen Tray<br>Providing and Fixing of Anodised Aluminium Recessed Pen Tray of Kubik make : Model No. KS-PT-001-AL or app. equivalent in natural anodized finish, of 450mm length and as directed. Rate shall be inclusive of the corresponding end caps : Model No. KS-EC-10, all hardware, wastages, partition modifications to accommodate the recessed fixture, etc complete and as directed.<br>
3
-
-
... More
od163717/2019_2020 : Motorised Pull-down Screen<br>Providing & Fixing of Motorised Pull-down Projector screen (8'x6') of approved make in the Conference Room inclusive of Somfy motor or approved equivalent make, Instalock glare-free screen, all hardware, taxes, etc complete.<br>
4.5
-
-
... More
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
626.97
-
-
... More
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
626.97
-
-
... More
13.26 : Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
626.97
-
-
... More
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
626.97
-
-
... More
14.54.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work
100
-
-
... More
od159919/2019_2020 : Providing and Fixing of Reception side signage of approx 900 x 300 mm size (as per the design given by Client team) & following the standard Signage spec of the Client for the lettering, colour, font size, etc.The Logo shall be in Vinyl and the Text shall be in S.S - both 50mm thick and fixed directly on the partition, and with LED concealed back-lighting. Rate to include for providing adequate support for fixing the same, wiring provision for the backlighting, etc, complete.<br>
2.75
-
-
... More
od159920/2019_2020 : Providing and Fixing of Room Nomenclature Signages of S.S finish with Acid etched lettering of approved shade and of size 400 x 100 mm. Names of rooms to be confirmed by Client. The S.S signage shall be pasted using double-sided tape of 3M make on the Glass doors / Flush doors.<br>
24
-
-
... More
od159921/2019_2020 : Providing and Fixing of Door PUSH / PULL Signages of S.S finish with Acid etched lettering of approved shade and of size 400 x 100 mm. The S.S signage shall be pasted using double-sided tape of 3M make on the Glass doors / Flush doors.<br>
30
-
-
... More
6.38 : Providing and laying autoclaved aerated cement blocks masonry with 100 mm thick AAC blocks in super structure above floor 2 level up to floorV level in cement mortar 1:4 (1 cement :4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work.
13.441
-
-
... More
13.78 : Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite / perite respectively conforming to IS : 2547 ( Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
267.628
-
-
... More
8.2.2.1 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite of any colour and shadeArea of slab upto 0.50 sqm
3.918
-
-
... More
od159925/2019_2020 : Toughened Glass Shelves<br>Providing and fixing 12 mm thick toughened glass shelves of size and shape as indicated in the required locations and fixed with S.S 'D' brackets. Rate to include for edge polishing of glass, protecting the glass until handover, all wastages, etc complete.<br>
1
-
-
... More
od159926/2019_2020 : "FLOOR MATS:<br>Providing and Fixing of Floor Mats of 3M make as specified below:-"<br>a) Main reception entrance of 3M Heavy Duty Nomad<br>
5
-
-
... More
od159927/2019_2020 : "FLOOR MATS:<br>Providing and Fixing of Floor Mats of 3M make as specified below:-"<br>b) Toilet Entrance of 3M Enhance<br>
7.5
-
-
... More
od159928/2019_2020 : Screed Flooring<br>"75 mm thick cement concrete flooring with concrete hardener topping, under<br>layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded<br>stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete."<br>
435.9
-
-
... More
od163723/2019_2020 : Projector Kit<br>Providing and Fixing of Ceiling Mounted Projector kit with provision of concealed wiring in the Conference Room.<br>
1
-
-
... More
od160224/2019_2020 : "Re-installation of the following Existing Furniture :<br>(Rate shall be inclusive of Dismantling, Transportation from existing office to New office, and Re-installation, etc of all furniture components complete as per the location and orientation of the New Design Layout)"<br>Tile based 'L' Workstations of dimensions 1200 x1200 mm<br>
9
-
-
... More
od160225/2019_2020 : "Re-installation of the following Existing Furniture :<br>(Rate shall be inclusive of Dismantling, Transportation from existing office to New office, and Re-installation, etc of all furniture components complete as per the location and orientation of the New Design Layout)"<br>"Type 1 Cubicle Table :-<br>Main Table : 1500 x 600mm<br>Return Table : 900 x 450mm"<br>
5
-
-
... More
od160226/2019_2020 : "Re-installation of the following Existing Furniture :<br>(Rate shall be inclusive of Dismantling, Transportation from existing office to New office, and Re-installation, etc of all furniture components complete as per the location and orientation of the New Design Layout)"<br>"Type 2 Cubicle Table :-<br>Main Table : 1800 x 750mm<br>Return Table : 900 x 450mm"<br>
3
-
-
... More
od160227/2019_2020 : "Re-installation of the following Existing Furniture :<br>(Rate shall be inclusive of Dismantling, Transportation from existing office to New office, and Re-installation, etc of all furniture components complete as per the location and orientation of the New Design Layout)"<br>"Type 3 Cubicle Table :-<br>Main Table : 2200 x 1200mm<br>Return Table : 1200 x 500mm"<br>
1
-
-
... More
od160228/2019_2020 : "Re-installation of the following Existing Furniture :<br>(Rate shall be inclusive of Dismantling, Transportation from existing office to New office, and Re-installation, etc of all furniture components complete as per the location and orientation of the New Design Layout)"<br>"CEO Table :-<br>Main Table : 1800 x 900mm<br>Return Table : 1200 x 600mm<br>Semi-circle end table Piece : 1 no.<br>Mobile Pedestal Storage Units : 2 nos."<br>
1
-
-
... More
od160230/2019_2020 : "Re-installation of the following Existing Furniture :<br>(Rate shall be inclusive of Dismantling, Transportation from existing office to New office, and Re-installation, etc of all furniture components complete as per the location and orientation of the New Design Layout)"<br>CEO Showcase Unit (800mm L x 400mm D x 2000mm H)<br>
1
-
-
... More
od160231/2019_2020 : "Re-installation of the following Existing Furniture :<br>(Rate shall be inclusive of Dismantling, Transportation from existing office to New office, and Re-installation, etc of all furniture components complete as per the location and orientation of the New Design Layout)"<br>Half-height Storage Unit (900mm L x 430mm D x 1200mm H)<br>
10
-
-
... More
od160232/2019_2020 : "Re-installation of the following Existing Furniture :<br>(Rate shall be inclusive of Dismantling, Transportation from existing office to New office, and Re-installation, etc of all furniture components complete as per the location and orientation of the New Design Layout)"<br>Full-height Storage Unit (910mm L x 500mm D x 2000mm H)<br>
5
-
-
... More
od160233/2019_2020 : "Supply & Installation of 8-SEATER MEETING TABLE :<br>2400 X 1200 X 750MM HT<br>* ALUMINIUM POWER COATED FLIPUP BOX : 2 NOS CONSIDERED<br>* TABLE TOP: shall be made of 25mm thick Prelaminated Boards with 2mm PVC edge banding supported on MS Powder coated legs.<br>* MS CONNECTOR: 50X25 provided in-between the leg for support. <br>* Leg :- 50x50 MS Square 16 gauge MS leg with Approved powder coating in 80 microns. <br>* Wire Management :- HORIZONTAL RACEWAY & COVERED LEG CONSIDERED FOR WIRE ENTRY "<br>
2
-
-
... More
od160234/2019_2020 : "Supply & Installation of 18-SEATER CONFERENCE TABLE :<br>6000 X 1500 X 750MM HT<br>* ALUMINIUM POWER COATED FLIPUP BOX : 2 NOS CONSIDERED<br>* TABLE TOP: shall be made of 25mm thick Prelaminated Boards with 2mm PVC edge banding supported on MS Powder coated legs.<br>* MS CONNECTOR: 50X25 provided in-between the leg for support. <br>* Leg :- 50x50 MS Square 16 gauge MS leg with Approved powder coating in 80 microns. <br>* Wire Management :- HORIZONTAL RACEWAY & COVERED LEG CONSIDERED FOR WIRE ENTRY "<br>
1
-
-
... More
od160235/2019_2020 : "Supply & Installation of MD CABIN TABLE :-<br>MAIN TABLE : 1800X900X750MM HT<br>RETURN TABLE : 1200X600X750MM HT<br>* TABLE TOP: shall be made of 25mm thick Prelaminated Boards with 2mm PVC edge banding supported on MS Powder coated legs.<br>* MS CONNECTOR: 50X25 provided in-between the leg for support. <br>* LEG: 50x50 MS Square 16-gauge MS leg with Approved powder coating in 80 microns.<br>* METAL MODESTY CONSIDERED FOR 450MMHT<br>* MOBILE PEDESTAL UNIT : 400X450X590MMHT : 2 NOS.<br><br>2 Nos. of Mobile Prelam pedestal with lockable castors made of Prelam particle board finish. One drawers Pedestal 400mm (w) X 450mm (d) X 590 mm (h) contain two equal drawers and one larger drawer for box files. Each lock has One sets of keys. The slides are ball bearing to ensure smooth movement. Slides & Mett box are of EBCO make, Handles & Locks from Hettich."<br>
1
-
-
... More
od160236/2019_2020 : "Supply & Installation of 1200 mm Height Free-standing Modular Partitions made of 75mm thick Tile-based System.<br>* The Bottom panel upto 750 mm height shall be of prelam finish on both sides of app. shade.<br>* The Top panel shall be of contrast finishes of Fabric pin-up board and White board as per app. shop drawing design.<br>* The Rate inclusive for 2 nos. of raceway : 1 at skirting level for data; and 1 at table-top level for power.<br>* The metal parts shall be made of 1.2mm thick with Aluminum Powder coating finishes. The powder coating is of 50 Microns and textured finish. Both Horizontal & Vertical members are made of similar gauge of Aluminum sections. The trims are made of Aluminum with curved profile. Two way and three way posts are provided which covers the connectors. Top connector caps are made of Aluminum.<br>* The base beam on the skirting shall have suitable reinforcement and required nos. of floor brackets for proper stability."<br>
57
-
-
... More
od160237/2019_2020 : "Supply & Installation of Breakout Table :<br>Top Size: 1200mm x 750 mm<br>Table Top: 18mm thick HMR Board - Post-formed Edge on the 2 longer sides, and PVC Edge binding on 2 shorter sides.<br>Leg: 16 guage MS Powder Coated Legs"<br>
2
-
-
... More
od160238/2019_2020 : "Supply & Installation of Breakout Bar Counter :<br>Top Size: 450mm Depth x 1050 mm Height<br>Table Top: 18mm thick HMR Board - Post-formed Edge along the exposed longer side, and PVC Edge binding on the other 3 sides.<br>Table-top shall be supported by suitable MS cantilever bracket."<br>
2.4
-
-
... More
od160239/2019_2020 : "Supplying & Installation of Chairs (Category 1) :<br>For Reception, Workstations & Open Cubicle Visitors (Medium Back) :-<br>Glass filled Nylon Base, Gaslift, Twin Wheel Nylon Castors;<br>Fixed PP Armrest;<br>Back: ABS with Mesh Upholstery, Synchro Tilt Mechanism, Inbuilt Lumbar Support;<br>Seat: PU Moulded Cushion with app. shade Fabric"<br>
48
-
-
... More
od160240/2019_2020 : "Supplying & Installation of Chairs (Category 2) :<br>For Meeting Rooms & Cubicle Heads (High Back) :-<br>Chrome Base, Gaslift, Twin Wheel Nylon Castors;<br>Height Adjustable PU Armrest;<br>Back: ABS with Mesh Upholstery, Synchro Tilt Mechanism, Inbuilt Lumbar Support;<br>Seat: PU Moulded Cushion with app. shade Fabric;<br>Height adjustable Head Rest"<br>
29
-
-
... More
od160241/2019_2020 : "Supplying & Installation of Chairs (Category 3) :<br>For Conference Room & CEO / MD Cabin (High Back) :-<br>Diecast Aluminium Base, Gaslift, Twin Wheel Nylon Castors;<br>Adjustable swivel PU Arms;<br>Seat & Back:PU Leatherite Upholstery of app. shade;<br>Multi-Lock Mechanism<br>"<br>
2
-
-
... More
od160242/2019_2020 : "Supply & Installation of Breakout Chairs of app. shade:-<br>Single Moulded PP Shell;<br>16 Gauge Round Pipe with Powder Coated Legs"<br>
8
-
-
... More
od160243/2019_2020 : Supply & Installation of Breakout Barstools of app. Design & shade with Gas Lift mechanism<br>
4
-
-
... More
od160244/2019_2020 : "Supply & Installation of 2-seater Sofa of approved design and fabric finish :<br>1500 mm L x 800 mm D"<br>
3
-
-
... More
od160245/2019_2020 : "Supply & Installation of 3-seater Sofa of approved design and fabric finish :<br>2100 mm L x 800 mm D"<br>
1
-
-
... More
HVAC WORKS
-
-
-
... More
od138836/2019_2020 : "Outdoor Unit(ODU) : Cooling Capacity :16 HP (Actual Capacity-Top Discharge Unit)<br>Minimum Number of Outdoor Unit: 1<br>Model No:As per make <br>Max.No. of Indoor Unit can be connected with one outdoor units: 15-50 Nos. (Suitable to application) "<br>
1
-
-
... More
od152046/2019_2020 : "SITC of VRV airconditioning system comprising of Modular type high efficiency DC Scroll / Twin Rotary Multiple Compressor with DC inverter, High efficiency heat transfer Cooling Coil suitable for Environment friendly R410a refrigerant,Air cooled propeller type condenser fan with DC motor drive,interconnecting piping, suction line insulation etc., Micro-processor control panel suitable for automatic operation,High speed calculation inverter control, active oil control mechanism incorporating all safety functions as per equipment specifications & other points as listed below:<br>Details of cost for one each"<br>Cost of 14HP top discharge cooling only
1
-
-
... More
od152042/2019_2020 : "SITC of VRV airconditioning system comprising of Modular type high efficiency DC Scroll / Twin Rotary Multiple Compressor with DC inverter, High efficiency heat transfer Cooling Coil suitable for Environment friendly R410a refrigerant,Air cooled propeller type condenser fan with DC motor drive,interconnecting piping, suction line insulation etc., Micro-processor control panel suitable for automatic operation,High speed calculation inverter control, active oil control mechanism incorporating all safety functions as per equipment specifications & other points as listed below:Details of cost for one each"Cost of 12HP top discharge cooling only
1
-
-
... More
od152161/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>2.5 TR -4 way Cassette unit<br>
2
-
-
... More
od152704/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>2.0 TR -4 way Cassette unit<br>
2
-
-
... More
od155854/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>1.5 TR -4 way Cassette unit<br>
4
-
-
... More
od155859/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>1.3 TR -4 way compact Cassette unit<br>
2
-
-
... More
od152721/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>0.8 TR -4 way compact Cassette unit<br>
4
-
-
... More
od152722/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>2.0 TR -Hiwall split AC unit<br>
7
-
-
... More
od152723/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>1.6 TR -Hiwall split AC unit<br>
1
-
-
... More
od152724/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>1.3 TR -Hiwall split AC unit<br>
1
-
-
... More
od152725/2019_2020 : "Indoor Unit(IDU): Cooling type : <br>All the units should be supplied with Cordless remote control. The following Indoor unit capacities are required for each type of Room.<br>"<br>0.8 TR -Hiwall split AC unit<br>
2
-
-
... More
od152729/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>41.3mm OD <br>
10
-
-
... More
od152730/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>34.6 mm OD <br>
8
-
-
... More
od152731/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>28.6 mm OD <br>
36
-
-
... More
od152732/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>22.2 mm OD <br>
19
-
-
... More
od152733/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>19.1 mm OD <br>
32
-
-
... More
od152734/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>15.9 mm OD <br>
78
-
-
... More
od152735/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>12.7 mm OD <br>
63
-
-
... More
od152736/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>9.5 mm OD <br>
101
-
-
... More
od152737/2019_2020 : Interconnecting copper refrigerant pipe work duly insulated with 13mm thick elastomeric nitrile rubber type tubular insulation between indoor & outdoor units as per specifications . All piping inside the room shall be properly supported with hanger and all piping should be run in perforated cably tray. Cable tray qty specified seperately.<br><br>6.4 mm OD <br>
15
-
-
... More
od152738/2019_2020 : Electrical Cable between Isolator to ODU. 16sqmm 4.0 core copper flexible cable with necessary earthing insulation<br>
30
-
-
... More
od167190/2019_2020 : Wiring for ODU to IDU wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.<br>
180
-
-
... More
od152739/2019_2020 : Imported fittings like Y-Joints and headers etc as per the layout( additional supports should consider for both ends of the Y joint)<br>
21
-
-
... More
od152740/2019_2020 : Filling, testing, commissioning including topping up of Refrigerant.<br>
40
-
-
... More
od156093/2019_2020 : Pressure testing /Leakage testing for both Liquid & Gas pipes<br>
3
-
-
... More
od156094/2019_2020 : Supply & providing of MS stand for VRV ODU along with proper supports (using, 6mm thick Channel, Angle with all accessories)<br>
180
-
-
... More
od156097/2019_2020 : Supply, Installation ,Testing and commissioning of HI WALL Split AC IDU's/ODU's and copper piping with necessay fittings fittings,(This includes the pressure testing,refrigerent charging and electrical & Control cable between IDU&ODU,commissioning and MCB to ODU needs to be considered.. The vendor shall quote as a lumpsum value as per the approved drawing for the above works. <br><br>SITC of 2.0TR-800CFM- Hi Wall type split AC for Server Room<br>
1
-
-
... More
od156101/2019_2020 : SITC of Soft drawn copper pipe with 5/8" dia suction line & 3/8" dia liquid line pipe. The suction & liquid line shall be insulated with 9mm thick sleeveless nitrile rubber insulation.The rate shall be inclusive of Electrical & Control cable between IDU & ODU & MCB
10
-
-
... More
od156102/2019_2020 : Supply and installations of auto change over sequential timer panel for reducing the temperature level in server/Ups room (by switch ON stand by unit automatically). Including all connections, cable between indoor unit to panel & actuator to panel, temperature sensor connection at return air path etc
1
-
-
... More
od167191/2019_2020 : FRESH AIR LOUVER<br>"Supplying & fixing of powder coated extruded aluminium Return Air Grills with<br>louvers but without volume control dampers complete as required."<br>
2.5
-
-
... More
od167192/2019_2020 : Supply & installations of Perforated cable tray Hot Dipped Galvanised Iron 150 X 50 X 1.6 mm<br>
70
-
-
... More
od167193/2019_2020 : Supply & installations of Perforated cable tray Hot Dipped Galvanised Iron 300 X 50 X 1.6 mm<br>
95
-
-
... More
od156106/2019_2020 : "Supply, installation, testing and commissioning of 25 mm Outer dia CPVC PIPE with<br>end caps including making air sampling opening of appropriate dia on appropriate<br>interval and all accessories as required,(rate for area protected in sqm)."<br>
70
-
-
... More
od156109/2019_2020 : "Supply, installation, testing and commissioning of 32 mm Outer dia CPVC PIPE with<br>end caps including making air sampling opening of appropriate dia on appropriate<br>interval and all accessories as required,(rate for area protected in sqm)."<br>
55
-
-
... More
od156111/2019_2020 : "Supply, installation, testing and commissioning of 40 mm Outer dia CPVC PIPE with<br>end caps including making air sampling opening of appropriate dia on appropriate<br>interval and all accessories as required,(rate for area protected in sqm)."<br>
30
-
-
... More
ELV SYSTEMS
-
-
-
... More
od156446/2019_2020 : "SITC of 6W RMS Ceiling Speakers with inbuilt 100V Line Matching Transformer, wide opening angle, optimized for music & speech applications with powder coated back box, supports as per specifications <br><br>- Max Power: 8W,Rated Power: 6Watts, Power Tapping: 6/3/1.5W<br>- Effective frequency range(-10 dB) : 150 Hz to 15KHz<br>- SPL at rated power (1Khz at 1 m) 108 dB<br>- Opening Angle 1 KHz / 4 KHz (-6 dB): 180/45"<br>
30
-
-
... More
od156448/2019_2020 : SITC of 6W Wall Mounted Speakers with line matching transformers as specified as per specifications <br>
6
-
-
... More
od156451/2019_2020 : "SITC of pagging station,Amplifier, 2 Zone Call Station with Stem Type Microphone, 2 mm thick CRCA Sheet Powder Coated Rack (to mount DVD Player, Amplifiers, tone generators, Zone selectors, prioroty modules etc.,) Dual Tone Control for Speech & Music etc. <br>Similar to Bosch PLN-AIO180-IN+PLE-2CS"<br>
1
-
-
... More
od156454/2019_2020 : SITC of Rack Mounted 240 W Power Amplifier <br>
1
-
-
... More
od156455/2019_2020 : "Supplying and drawing of cable Fire Retardant PVC insulated<br>copper conductor cable in the existing surface / recessed<br>steel conduit of following pairs, cores and size including<br>connections and interconnections etc. as required."<br>Speaker Cable Single Pair, 2-core, 1.5 sqmm<br>
480
-
-
... More
od156456/2019_2020 : "Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all<br>ancillaries and accessories like coupler etc. as required."<br>
480
-
-
... More
od156458/2019_2020 : SITC of Volume controller for one speaker (inside the BMS room)<br>
1
-
-
... More
od156489/2019_2020 : Rack Mounted DVD Player as per specifications <br>
1
-
-
... More
od156507/2019_2020 : CO2 type Fire Extinguisher ISI marked confirming to IS:15683. Capacity 4.5 Kg. Complete with delivery hose horn, squeeze grip release valve, locking arrangement,operating temperature -30°C to +55°C, supplied with body bearing IS 7285 mark and approved by CCoE tested at 250 kgf/cm2., fitted with ISI marked & CCoE approved valve as per IS 3224. CO2 Gas as per IS: 15222. externally painted with PO Red Shade No. 538 of IS 5, operation manual and floor stand or Wall Mount Bracket including accessories as required as per site condition<br>
2
-
-
... More
od156508/2019_2020 : Powder Fire Extinguisher (Stored Pressure type) (Powder pressurized with dry nitrogen gas at 15 bar.) capacity: 6kg duly ISI marked conforming to IS: 15683:2006, with IS 14609 ISI marked ABC powder complete with squeeze grip release valve, discharge pipe, locking arrangement, pressure gauge, operation manual,Body Hydrotested at 35 bar, Operating temperature -30°C to +55°C, external epoxy powder coating with PO Red Shade No. 538 of IS 5, and floor stand or Wall Mount Bracket including accessories as required as per site condition<br>
8
-
-
... More
od156510/2019_2020 : Supplying and providing signage " FIRE EXIT " Autoglow ,fixed on the exit door(Single SIDE,size 150 x 400)
6
-
-
... More
od156514/2019_2020 : Supplying and providing" EMERGENCY EXIT"Autoglow, with suspension chains(Double SIDE,size 150 x 400)
21
-
-
... More
od156516/2019_2020 : Supplying and Providing " EXTINGUISHER Signages" - Autoglow, with mount type (Autoglow signages, size 150 x 150)
9
-
-
... More
od156518/2019_2020 : Providing " EVACUATION PLAN"-Autoglow Fire escape route map in clear acrylic glass and required glass studs supports etc. Indicating direction, Key plan, contact numbers etc. (The sample of the same need to be presented for approval before execution)…. (Maximum size of the board A3) with necessary wall mount supports
3
-
-
... More
od156522/2019_2020 : "Supply, Installation, Testing and Commssioining of 2 reader controller, power supply unit, TCP IP connectivity with tamper detection provision as per the tender specifications.Cost should include enclosure and power supply unit for controller (power supply unit shall inclusive of battery backup).<br>(Rate shall inclusive of required master controller as per the architecture)."<br>
6
-
-
... More
od156524/2019_2020 : Supply, installation, testing & commissioning of proximity card readers with 2.5mm thick SS front plate as per specification suitable for mounting on metal surface/metal frames or wooden frames wall or as required based on site conditions including all accessories.<br>
12
-
-
... More
od156525/2019_2020 : Supply, installation, testing and commissioning of Proximity Access Cards with Lanyard to hold the cards as per specification.<br>
100
-
-
... More
od156526/2019_2020 : Supply, Installation, Testing and Commssioining of Electromagnetic Lock with required mounting brackets for single door as per the tender specifications<br>
5
-
-
... More
od156527/2019_2020 : Supply, Installation, Testing and Commssioining of Electromagnetic Lock with required mounting brackets for double door as per the tender specifications.<br>
1
-
-
... More
od156529/2019_2020 : Supply, Installation, Testing and Commssioining of surface / flush mounted (as required at site) Magnetic Contact (Door position sensor) for access controlled doors as per the tender specifications<br>
7
-
-
... More
od156530/2019_2020 : Supply, Installation, Testing and Commssioining of Push Button/switch with accessories (Reception Table)<br>
1
-
-
... More
od156532/2019_2020 : Supply,Installation, Testing and Commssioining of the Security Management Server software and also proivde Integrated Access Management 1 Master Software for Access Control & Time & attendance software with alarm monitoring as per the tender specifications<br>
1
-
-
... More
od156535/2019_2020 : "Supply, Installation, Testing and Commssioining of security Management Software PC Server Station with minimum <br>Intel i3 2.6 Ghz processor, <br>8 GB RAM, <br>Graphics card with 1GB,<br>500 GB HDD, <br>24"" Color flat panel LED Monitor,500TVL, <br>1080P HD Resolution, <br>100/1000Mbps network card with original Microsoft Windows 8 Operating System or higher, antivirus softwares,MS softwares.<br> <br>These PC (1#) will be loaded with Security Management Server software Master Software, Access Control & Alarm Monitoring and CCTV."<br>
1
-
-
... More
od156536/2019_2020 : Supply, Installation, Testing and Commssioining of Local scare alarm with required wiring between LCA & door contacts (For fire exit doors).<br>
3
-
-
... More
od156539/2019_2020 : Supply, Installation, Testing and Commssioining of panic bar for fire exit doors as per Specification (For fire exit doors).<br>
3
-
-
... More
od156540/2019_2020 : "Supply and laying of 4 core 1.0 Sq mm Un Armoured Shielded FRLS, Multistanded Copper Conductor, PVC sheathed Cable for connecting controller to Lock & door position sensors, Buzzer,BGU,Pushbutton as per the tender specifications<br>Rate shall inclusive of 2mm thick suitable dia FRLS PVC conduits with ,JB's in wall, columns, ceiling etc., including associated civil works. (conduits & cables - blue color)"<br>
590
-
-
... More
od156541/2019_2020 : "Supply and laying of 8 core x 1 Sq mm Un Armoured Shielded FRLS, Multistanded Copper Conductor, PVC sheathed Cable <br>for connecting controller to readers as per the tender specifications<br>Rate shall inclusive of 2mm thick suitable dia FRLS PVC conduits with ,JB's in wall, columns, ceiling etc., including associated civil works. (conduits & cables - blue color)"<br>
530
-
-
... More
od156544/2019_2020 : Supply and laying of MS Powder coated Trunking 300 x 50 mm x 2mm with cover & fixing suppports etc as required<br>
9
-
-
... More
od156546/2019_2020 : Supply, Installation, Testing and Commissioning of Buzzer for access controlled doors as specified in the Tender Specifications <br>
6
-
-
... More
od156554/2019_2020 : 8 port 10/100/1000 layer 2 switches with IP multicast snooping and data-driven IGMP support and with minimum two 1000baseT RJ45 uplink ports and twp 1000 baseT Fiber uplink ports and enclosure/rack for switch with mounting supports and all accessories.<br>
1
-
-
... More
od156555/2019_2020 : Supply and laying of CAT6 cable including 2mm thick PVC FRLS conduit (cost shall inclusive of accessories)<br>
10
-
-
... More
od156556/2019_2020 : Supply and laying of 1" - 2 mm thick FRLS - PVC Conduits,JB's in wall, columns, ceiling etc., including associated civil works.<br>
10
-
-
... More
od156558/2019_2020 : "IP Dome camera 2 MP HD 1080P with 1/3"" CCD/CMOS, Progressive/De-interlace, Very High Definition resolution (1920x1080), Dual streaming, 25 FPS, min one H.264 stream & one H.264/MPEG 4 stream compression support, 2.7-12mm lens, 0.1 lux, Tamper detection with built in WDR & automatic back light compensation circuitry with camera manufacturer's power supply unit. The camera shall be capable of operating on both POE and an UPS power source . Camera shall be along with Suitable adaptor with 2meter cable.<br>Camera shall be along with camera mounting pole/back box and accessories"<br>
12
-
-
... More
od156562/2019_2020 : "Supply, installation, testing and Commissioning of 16ch Network video recorder with required storage capacity to accomadate 30days storage, complete with rack & all accessories as required. Recording at 4CIF & 15FPS<br>NVR shall be along with Digital Video Management software, NVR software and Local & Remote Video monitoring Multi Camera Screen Viewing Software<br>Software shall have the license for minimum 30 cameras"<br>
1
-
-
... More
od156563/2019_2020 : 24 port 10/100/1000 layer 2 POE switches with IP multicast snooping and data-driven IGMP support and with minimum two 1000baseT RJ45 uplink ports and twp 1000 baseT Fiber uplink ports and enclosure/rack for switch with mounting supports and all accessories.<br>
1
-
-
... More
od156564/2019_2020 : "Supply and laying of CAT6 cable<br>(this item inclusive of necessary patch cords,I/O's & terminations for connecting camera with network switch)"<br>
450
-
-
... More
od156565/2019_2020 : Supply and laying of 1" - 2 mm thick FRLS - PVC Conduits,JB's in wall, columns, ceiling etc., including associated civil works.<br>
360
-
-
... More
NETWORKING
-
-
-
... More
od160652/2019_2020 : Horizontal Cabling<br>DATA - CAT6:<br>Cat6 RJ45-RJ45 UTP Patch Cords, with snagless boots, color matched, Yellow (100% Considered) - Work location, 7ft, Data<br>
59
-
-
... More
od160653/2019_2020 : SITC of 4-port Faceplate, BS Style<br>
7
-
-
... More
od160654/2019_2020 : SITC of 2-port Faceplate, BS Style<br>
30
-
-
... More
od160655/2019_2020 : SITC of 1-port Faceplate, BS Style<br>
7
-
-
... More
od160656/2019_2020 : SITC of Cat6 RJ45-RJ45 UTP Patch Cords, with snagless boots, color matched, Yellow (100% Considered) - Equipment end, 7ft, Data<br>
59
-
-
... More
od160657/2019_2020 : SITC of 4-pair, Cat6 UTP Cable, roll of 305m<br>
8
-
-
... More
od160658/2019_2020 : SITC of Cat6 24-port Unloaded Angular Jack Panel, 1U <br>
3
-
-
... More
od160659/2019_2020 : SITC of Cat6 UTP Jack with Strain relief and bend limiting boot (SL Series), Yellow - Work location & Equipment end<br>
118
-
-
... More
od160660/2019_2020 : VOICE<br>SITC of 4-pair, Cat6 UTP Cable, roll of 305m<br>
5
-
-
... More
od160661/2019_2020 : SITC of Cat6 UTP Jack with Strain relief and bend limiting boot (SL Series), Blue - Work location & at the Comms Room<br>
72
-
-
... More
od160663/2019_2020 : SITC of Cat6 RJ45-RJ45 UTP Patch Cords, with snagless boots, color matched, Blue (100% Considered) - Equipment end, 7ft, Voice<br>
36
-
-
... More
od160664/2019_2020 : VOICE RESOURCE CABLING<br>25 Pair Riser Cable<br>
240
-
-
... More
od160666/2019_2020 : SITC of 100 Pair Krone Block with steel back frame<br>
1
-
-
... More
od160667/2019_2020 : RACKS & WIRE MANAGERS<br>SITC of 15U Rack Frame/Steel/Casters Type 3/Black with Levellers, Front Perforated Single Door, Rear Perforated Dual Doors, Side Vented Panels, Swing Handle<br>
4
-
-
... More
od160668/2019_2020 : SITC of 24 port Managed network switch<br>
3
-
-
... More
od160669/2019_2020 : SITC of Horz. Cable Organiser/2U/ Channel On Front<br>
7
-
-
... More
od160670/2019_2020 : SITC of Server /IT Rack mount power distribution unit, 1Ph, 230V, 32A, 50/60Hz, Zero U standard with 12 X Indian Round Pin 5/15A, 16A MCB X 2 Circuits- PDU Rating 7.3KVA/Bottom feed-3Mt/ Black/ Inlet Plug Not Installed<br>
4
-
-
... More
ELECTRICAL PANEL AND LIGHT FITTINGS
-
-
-
... More
od156934/2019_2020 : Supply, Installation, Testing and Commisioining of High performance, Recess mounted 35W 2X2 LED light fitting. The supply of accessories like clamps, supporting brackets and hardwares as required and interconnecting with 3 core 1.5 sqmm PVC insulated FRLS copper wire with all accessories required as per site conditions.(as per the Arraystrom Cat.no:ASGL2002RFXXIN035 or equivalant type)<br>
56
-
-
... More
od156935/2019_2020 : Supply, Installation, Testing and Commisioining of Recess mount 15W LED down light fitting with all accessories and interconnecting with 3 core 1.5 sqmm PVC insulated FRLS copper wire and fixing the same in the ceiling / partition as per site conditions. (as per the Arraystrom Cat No:ASDL1004RFXXIN015 or equivalant type)<br>
121
-
-
... More
od156936/2019_2020 : Supply,Installation, Testing and Commisioining of wipro make single 40W LED Linear recessed type fittings with all accessories Copper ballast and 2.5 mtr hanging chain required as per the site conditions (Including the earthing of fixture) (as per the Arraystrom Cat No: ASCL6332RFXXIN040 or equivalant type)<br>
8
-
-
... More
od156940/2019_2020 : Supply of wipro make single 4 feet surface mount 15W LED patty type fittings with all accessories Copper ballast and 2.5 mtr hanging chain required as per the site conditions (Including the earthing of fixture) (as per the Arraystrom Cat No: ASTB9002FFXXIN015 or equivalant type)<br>
22
-
-
... More
od156941/2019_2020 : Supply, Installation, Testing and Commisioining of decorative type LED fittings. The supply of accessories like clamps, supporting brackets and hardwares as required and interconnecting with 3 core 1.5 sqmm PVC insulated FRLS copper wire with all accessories required as per site conditions approved by archeitech/consultant.Approx.
14
-
-
... More
od156942/2019_2020 : SITC of Wall lamp 6-12 W LED
2
-
-
... More
od164153/2019_2020 : Supply and installations of 230V, 50HZ ceiling fan with max 600mm blade length, with other necessories , Chasing, embeding, Plastring required as oer site conditions. Note: including suspend rod.<br>
4
-
-
... More
od156966/2019_2020 : Supply, Fixing of Aluminium Trunking box of 1.6mm thick and should be earthed every 3meters with 2.5sqmm copper wire, 60MM floor cutting, plastering Clamps and all other accessories as required as per the site condition for fixing the same. (the proper couplers to be used in between the joining of raceways)<br><br>100 x 45mm Aluminium Channel<br>
255
-
-
... More
od156967/2019_2020 : Supply, Fixing, Erection of Powder coated MS Junction box of following sizes.The MS junction box shall be earthed with 2.5sqmm copper wire with all hardwares and accessories as required including all clamps and hardwares for fixing the same. The proper supporting to be provided in the centre of the Junction Boxes. The Junction to be covered all other sides, excluding the entry side. The junction thickness is 2mm and top cover 3mm.<br>150 x 150 x 50mm <br>
54
-
-
... More
od156968/2019_2020 : Supply, Fixing, Erection of Powder coated MS Junction box of following sizes.The MS junction box shall be earthed with 2.5sqmm copper wire with all hardwares and accessories as required including all clamps and hardwares for fixing the same. The proper supporting to be provided in the centre of the Junction Boxes. The Junction to be covered all other sides, excluding the entry side. The junction thickness is 2mm and top cover 3mm.<br>250 x 250 x 50mm<br>
18
-
-
... More
od156969/2019_2020 : Supply, Fixing, Erection of Powder coated MS Junction box of following sizes.The MS junction box shall be earthed with 2.5sqmm copper wire with all hardwares and accessories as required including all clamps and hardwares for fixing the same. The proper supporting to be provided in the centre of the Junction Boxes. The Junction to be covered all other sides, excluding the entry side. The junction thickness is 2mm and top cover 3mm.<br>350 x 350 x 50mm<br>
6
-
-
... More
od157058/2019_2020 : Supply, installation, testing & commissioning of EB LT METERING PANEL made of 16/18 SWG CRCA sheet steel, Powder coated with necessary angle iron frame work, Aluminum bus bar & interconnections consisting of the following. (Refer enclosed SLD)<br>EB Incomer:<br>4set - 63A HRC TPN Fuse Cutout<br>Metering for Incomer :<br>4set - Test Terminal Block<br>4set - RYB indication lamps<br>4set - Control Fuses with Neutral link<br>Space to accommodate the EB supplied 63A KWHR meters.<br>4set - Current Transformers 63/5A, class, 0.2, 15VA, shall be provided <br>Note: Sealing arrangements shall be provided for metering panels as required by kerala electricity board officials. <br>Outgoings:<br>4Set -63A TPN HRC Fuse <br>4sets - 63A TPN,MCB <br>
1
-
-
... More
od157059/2019_2020 : SITC of 15KVAR 3phase delta connected 525V heavy duty Capacitor <br>
4
-
-
... More
od157061/2019_2020 : "EB FLOOR POWER PANELSupply, Erection, Testing and Commissioning of Indoor type Floor Power panel floor mounting type, dust and vermin proof by construction of 14 SWG CRCA sheets Compartmentalised,all MCCB shall have inbuilt shunt trip coil arrangement and , CTs shall be cast resin type only.with modular type IP 42 Protection with powder coated panel as specification belowIncomer: 1 Nos - 63A, ATS 2 Sets of Current transformers rated 63/5A, 10VA/CI 0.5 for metering. Digital Multi data Meter with RS 485 for EB and DG metering2 Sets – RYB indication lamps with control fuses shall have LED 'ON / OFF / TRIP' ELR with CBCT.(500mA S)Outgoing: 4 Nos - 63A ,TPN, MCB1 Nos - 40A ,TPN, MCB63A Aluminium Bus Bar and Associated Accessories as required.Incoming and outgoing cables shall be of Top/bottom entry "
3
-
-
... More
od157062/2019_2020 : DG PANELSupply, Erection, Testing and Commissioning of Indoor type Floor Power panel floor mounting type, dust and vermin proof by construction of 14 SWG CRCA sheets Compartmentalised,all MCCB shall have inbuilt shunt trip coil arrangement and All MCCBs of 250A and above for non-ups loads will be microprocessor based , CTs shall be with dual ratio and cast resin type only.with modular type IP 42 Protection with powder coated panel as specification below<br>Incomer: <br>1 Nos - 63A, TPN, MCCB <br>1 Set of Current transformer rated 63/5A, 10VA/CI 1.0 for metering.<br>1 No – Digital Multi data Meter with RS 485 <br>1 Set – LED type RYB indication lamps with control fuses,In coming breakers shall have LED 'ON / OFF / TRIP' <br>1 Set - ELR with CBCT.(500mA S)<br>Outgoing: <br>4 Nos - 63A ,TPN, MCB<br>2 Nos - 40A ,TPN, MCB<br>63A Aluminium Bus Bar and Associated Accessories as required.<br>Incoming and outgoing cables shall be of Top /bottom entry only.<br>
1
-
-
... More
od157063/2019_2020 : Supply ,Erection, testing and commissioning of 82.5KVA, 0.8PF, 415V Prime power rated D.G. Set with Synchronization , acoustic enclosure, and with all accessories , 45mtr exhaust piping up to terrace, fuel oil motor operated pump etc. accessories for the total set including test trial run (inclusive of consumable oil, etc) control wiring, annunciation, etc. as per specifications.<br>
1
-
-
... More
od157168/2019_2020 : Supply & Laying of 25x3mm GI. Flat<br>
60
-
-
... More
od157169/2019_2020 : Supply & Laying of 25x3mm Cu. Flat<br>
40
-
-
... More
od157170/2019_2020 : Supply and Installation of 12 way 25x3mm copper earth bus with all accessories as required.<br>
3
-
-
... More
od157171/2019_2020 : Supply and laying of 1100V Rubber mat as per latest IS<br>
1
-
-
... More
od157172/2019_2020 : Supplying of First Aid Box with all required medicines and accessories as per standard norms<br>
1
-
-
... More
od157174/2019_2020 : Supply installation testing and commissioning of 3 KVA DOUBLE CONVERSON UPS with two input sources with IGBT Rectifier and anti harmonic filters of THD <3%.(all the technical datas of the system to be enclosed with the offer). The UPS shall be supplied with SNMP card ,BMS compatibility & remote monitoring panel with necessary power/communication cables and accessories as required.It also includes the supply of sealed maintenance free batteries for 15 minutes battery backup at full (3KVA Load) for the UPS with battery cubicle and associated accessories. Complete wiring required between the UPS systems and it's battery banks & Battery Stands. The cost shall be inclusive of Structural steel supports as per approved design for equal Load baring of 400kg/sqm for UPS system, battery cubicles also match level of the false flooring in UPS room.
3
-
-
... More
od157203/2019_2020 : EXTERNAL LIGHTING: Supply & Installation of cylindrical bollard luminaire with 9W LED fixture in made three parts comprising of (Spun aluminium top cover, Cylindrical clear acrylic diffuser, Baffles are provide to limit the glare) loop-in and loop-out smart pack juction box with MCB & necessary GI pipes for cable entry/ exit and including 3C x 2.5 sq.mm PVC multistranded copper wire between terminal block and luminaire and with coil earthing using 80 turns of 8 SWG GI. wire as per standards. (complete including all civil work for foundation etc) & Stand terminals as per specifications with one SP MCB and 20A TPN terminals. Supply and erection of Civil foundation & "U" Bolts & Nuts. Bajaj CAT REF., BGBOS605 9W LED or equivalent make<br>
31
-
-
... More
od157204/2019_2020 : Supply, Installation, Testing and Commisioining of Bulk head light IP66 with all accessories required as per site conditions Bajaj CAT REF., BIBWP 10W LED or equivalent make<br>
9
-
-
... More
od157205/2019_2020 : Supply, Installation, Testing and Commisioining of 80W Flood light IP66 all accessories required as per site conditions.Bajaj CAT REF., BJFL 80W LEDor equivalent make<br>
1
-
-
... More
od157206/2019_2020 : Supply, fixing, testing & commissioning of 72W LED streetlight luminaire with epoxy powder coated pressure die-cast aluminium housing with heat resistant toughened clear glass fixed with SS screws. with operating voltage range (140 - 310V AC). The luminaire shall be minimum IP66 protected.LED driver has protection against over voltage and short circuit with LED driver efficiency should be greater than 85% with CRI greater than 75 and with colour temperature 5700K range. In addition to built-in 5kV surge protection in driver, it is equipped with 10kV external surge protection. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.95 with THD less than 15%. System consumption should be 120W with lumen package of 11337 lumens (94 lm/W) Bajaj CAT REF BRTFG 72W LED or equivalent make<br>
6
-
-
... More
od157207/2019_2020 : Supply, fixing, testing & commissioning of 40W LED for Gate light luminaires with IP66 with necessary fixing suitable fixing of GI pipe & clamp required. Bajaj Cat No : BAJAJ BGCL 40W or equivalent make<br>
2
-
-
... More
od157208/2019_2020 : Supply of hot dip Galvanized GI Single Section Octagonal poles of 6 mtr. long, Earthing studs, TPN loop-in and loop-out smart pack juction box with MCB & necessary 50mm dia GI pipes bent to shape for cable entry/ exit and including 3C x 2.5 sq.mm PVC multistranded copper wire between terminal block and luminaire and with coil earthing using 80 turns of 8 SWG GI. wire as per standards. (complete including all civil work for foundation etc) & Stand terminals as per specifications with one 10A (10kA) SP MCB and 20A TPN terminals. Supply and erection of RCC Civil foundation & "U" Bolts & Nuts. <br>The street light pole items are inclusive of pole & its Foundation , cable interconnection between breaker and light fixture, Isolation breaker with weather proof enclosures, suitable size GI Pipe for cable in and out, eathing and all other accessories.<br>
6
-
-
... More
od157214/2019_2020 : Supply and Installation of GI cable ladder trays bolt nut fasterner type including tees,right angle bends,etc., including all fixing accessories etc., of the following sizes as required as per the site conditions.<br><br>i) 150X100mm Cable Tray<br>
20
-
-
... More
od157215/2019_2020 : Supply & Laying of 25x3mm GI. Flat<br>
10
-
-
... More
od157216/2019_2020 : Supply & Laying of 25x6mm GI. Flat<br>
15
-
-
... More
od157217/2019_2020 : Supply & Laying of 10 SWG bare Cu. Wire<br>
60
-
-
... More
od157220/2019_2020 : Supplying, laying and joining hume pipes of ISI mark joining specials in existing trenches upto a depth of 1.0 m joining with solvent cement, testing the line etc as required as approved by the site in charge. (Excavation different item) <br>110mm<br>
10
-
-
... More
od157221/2019_2020 : Supplying, laying and joining hume pipes of ISI mark joining specials in existing trenches upto a depth of 1.0 m joining with solvent cement, testing the line etc as required as approved by the site in charge. (Excavation different item) <br>160mm<br><br>
5
-
-
... More
od171899/2019_2020 : Excavation of cable trench of required size as directed at site for 300mm wide x 600mm deep cable trenches, providing sand bed, bricks on three sides & refilling for laying LT cables.<br>
180
-
-
... More
od172329/2019_2020 : STATUTORY DRAWINGS, INSPECTION AND APPROVALS<br>Obtaining approval from Statutory Authorities, Preparation of statutory drawings, completion Report, Arranging for Inspection, attending defects report and obtaining safety certificate from Safety Authorities for commissioning of the electrical system.(including all required statutory Norms ). Required sets of drawings with soft copy shall be submitted.<br>
1
-
-
... More
ELECTRICAL PONIT WIRING AND CABLING
-
-
-
... More
1.3.1 : Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group A
11
-
-
... More
1.3.2 : Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B
15
-
-
... More
1.3.3 : Wiring for light point/ fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C
30
-
-
... More
1.7.1 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
400
-
-
... More
1.7.2 : Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2X2.5 sq.mm+1X2.5 sq.mm earth wire
745
-
-
... More
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
88
-
-
... More
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch
58
-
-
... More
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
88
-
-
... More
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet
58
-
-
... More
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm)
32
-
-
... More
1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)
32
-
-
... More
1.27.3 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)
6
-
-
... More
1.27.4 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)
4
-
-
... More
2.19 : Supplying and fixing 20 amps 415volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 amps "C" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
6
-
-
... More
2.2.1 : Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 Amp, 16 KA, TPMCCB
1
-
-
... More
2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole
3
-
-
... More
2.16 : Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
2
-
-
... More
1.17.12 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm
1220
-
-
... More
1.17.21 : Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm
15
-
-
... More
od164168/2019_2020 : Supply, Installation, Testing and Commissioning of three phase, phase segregated, compartmentalized 8 way MCBDB Double door type, IP 42 powder coated comprising of "C" curve MCB's for LIGHTING POWER DB.<br>Incomer - 40A TPN MCB - 1 No<br>Phase Incomer - 40A 100mA DP ELCB/RCCB - 3Nos<br>Outgoings - 6A SP MCB - 10Nos<br>Outgoings - 16A SP MCB - 14Nos<br>Including all interconnections and other associated fixing accessories etc as required as per the site conditions.
3
-
-
... More
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door
3
-
-
... More
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps
3
-
-
... More
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole
36
-
-
... More
od162572/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. <br>3.5C 150 sq.mm XLPE AR AL Cable <br>
25
-
-
... More
9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2 X 150 sq. mm (50mm)
2
-
-
... More
od162692/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. 4C 16 sq.mm AR Aluminium Cable<br>
180
-
-
... More
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)
30
-
-
... More
od162728/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. 4C 10sq.mm XLPE AR AL Cable <br>
45
-
-
... More
od162735/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. 4C 6sq.mm XLPE AR AL Cable <br>
30
-
-
... More
od162740/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. 2x4x2.5 sq.mm instrumentaion cable<br>
30
-
-
... More
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
14
-
-
... More
od162788/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. 4C10 sq.mm Ar. Copper Cable YFY <br>
10
-
-
... More
od162819/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. 2C 6 sq.mm Copper Cable
190
-
-
... More
od162821/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. 2C 4 sq.mm Copper Cable <br>
250
-
-
... More
9.1.1 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 6 sq. mm (19mm)
42
-
-
... More
4.1.2 : Supplying and installing following size of perforated pre-painted M.S. cable trays with
perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.150 mm width X 50 mm depth X 1.6 mm thickness
200
-
-
... More
4.1.3 : Supplying and installing following size of perforated pre-painted M.S. cable trays with
perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.225 mm width X 50 mm depth X 1.6 mm thickness
50
-
-
... More
4.1.4 : Supplying and installing following size of perforated pre-painted M.S. cable trays with
perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.300 mm width X 50 mm depth X 1.6 mm thickness
100
-
-
... More
4.1.6 : Supplying and installing following size of perforated pre-painted M.S. cable trays with
perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.450 mm width X50 mm depth X 2.0 mm thickness
25
-
-
... More
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
1
-
-
... More
5.6 : Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
-
-
... More
5.2 : Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providingmasonry enclosure with cover plate having locking arrangement and watering pipe etc. withcharcoal/ coke and salt as required
8
-
-
... More
5.18 : Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
80
-
-
... More
od172318/2019_2020 : EXTERNAL LIGHTING: Supply, Laying, Testing and Commisiosning of 2R 2.5Sqmm + 1R 1.5Sq.mm PVC insulated FRLS multistrand copper wire with 20mm dia FRLS PVC conduit with all accessories as required as per site conditions.(lighting circuit mains)<br>
181
-
-
... More
od172319/2019_2020 : Supply, Laying, Testing and Commisiosning of 2R 2.5Sqmm + 1R 1.5S.mm PVC insulated FRLS multistrand copper wire in existing FRLS PVC conduit with all accessories as required as per site conditions.<br>
125
-
-
... More
od172320/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. <br>4C 25 sq.mm XLPE AR AL Cable <br>
30
-
-
... More
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm)
2
-
-
... More
od172321/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. <br> 4C 16 sq.mm AR Aluminium Cable<br>
50
-
-
... More
9.2.29 : Supplying and making outdoor end termination with cast resin compound including aluminium
lugs and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm
14
-
-
... More
od172322/2019_2020 : Supply, Laying, Testing and Commisioining of 1100V PVC insulated XLPE and sheathed Armoured/Unarmoured Copper / Aluminium Conductor cables laid over MS supports / Cable racks /fixing of walls including clamping the cable to the support in all approved manner as all complete required. End cable termination lugs shall be as per the respected cable size with respected gland and also double compression gland shall be provide for the 25Sqmm above cable size with double gland earthing to be considered and other accessories to be provided as required as per the site condition. 4C 10 sq.mm AR Aluminium Cable <br>
600
-
-
... More
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
100
-
-
... More
od172429/2019_2020 : Supply and Fixing of 25mm dia MS Conduits<br>
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements