Kerala State Housing Board Tender

SETC LIFT

Supply Erection, Installation, Testing and Commissioning of 680 KG Kg (10 person) capacity 3 stops (Ground to 2nd floor - G+1+2.) 3openings, double door, 1 m/s, V3F Microprocessor controller based drive, Machine room Less, simplex full collective with or without attendant lift with stainless steel car of size 1350 (W) x 1300mm (D) x 2200mm (H)with toughened glass door full height with frame both car and landing doors , operating on 415V, 50Hz, 3 Phase Electrical supply having gearless motor, guide rails with suitable counter weight mechanism with following features; Car Features Lift car Should have LED down lights, Cross flow ventilation fans, LED back light control button, LED car position scrolling indicator (both outside & inside),DC door operator, stainless steel mirror finish hand rails on rear panel, stainless steel finish false ceiling, vinyl/Tile/Granite/ flooring etc suiting to manufacturer specification standards ARD System Supply and providing suitable ARD system for the above Lift with standard dust & vermin proof ARD panel including all necessary control wiring adequate capacity SMF batteries etc to attend during sudden power failure ;Other Required Features 1.The Lift should have Anti nuisance car call protection, Overload Device, Nudging, Emergency Firemen’s Service, Emergency Car Light Unit, Infrared Curtain Door Protection, Door Time Protection, Emergency Alarm Button, Manual Rescue Operation, Belt Inspection Drive, Auto Fan Cut Off, Car Chime, Voice Synthesizer, Intercom, preparing drawings for approval from statutory bodies including Liaoning and obtain operating sanction and license in Form F 2. The rate should include the charges for doing the necessary reinforcement works for making the existing lift well suitable for the proposed lift. 3The whole system should cope with relevant IS Codes Part (1) and (2) code of practices.4.Each and every component make, like Rails, Controller, Diverter Pulley, make of steel , steel wire rope, Machine Drive, Auto door and door sensor, COP,LOP etc should be clearly specified along with offer