INKEL Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 93,47,590Document Cost
₹ 17,700Tender Fee
Refer Documents
Summary
Development Of Government Medical College, Ernakulam Construction Of Super Speciality Block Package Ii Mep And Balance Civil Works
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_INKEL_431273_1Bid Award Id
ViewTender No
NIT/ INKEL/KIIFB/2021-22/123 dated 26/07/2021Tender Authority
INKEL Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides
1352.76
-
-
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness
1467
-
-
21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness
1778.03
-
-
21.15.2: Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminium
100
-
-
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) locking arrangement for sliding windows including necessary screws and fittings of approved make as directed by Engineer-in-charge.
1832
-
-
Providing and fixing roller for shutters of sliding aluminium windows with necessary screws etc.complete.As approved by Engineer-in-charge
7328
-
-
9.97.1 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:300x10 mm
1139
-
-
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm
1139
-
-
21.18 : Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge ( Door handle, lock and stopper etc to be paid separately)
38.88
-
-
Providing and fixing Stainless Steel Corner Patch Lock with Strike Plate of SSS finish for toughened glass door including all necessary fittings Or equivalent.
18
-
-
Providing and fixing Stainless steel D type glass door handle with SSS polished finish of 25mmx450mm size.
18
-
-
21.4.1 : Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS: 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors including cost of cutting floors, embeding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer -in- Charge.With stainless steel cover plate minimum 1.25 mm thickness
569
-
-
9.100.1 : Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm
1064
-
-
9.100.2 : Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:100 mm
1214
-
-
9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
570
-
-
9.88 : Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
873
-
-
9.101.1 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper
607
-
-
9.101.2 : Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Twin rubber stopper
532
-
-
9.121 : Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminated shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
2450
-
-
9.122.1 : Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
823.2
-
-
9.106.2 : Providing and fixing PTMT handles with necessary screws etc. complete.150x34x24 mm weighing not less than 26 gms
980
-
-
9.108.2 : Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete.202x42x18 mm weighing not less than 78 gms
980
-
-
Providing and fixing 1 mm thick M.S. sheet door with shutter frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings with outer frame of size 50x50x6 mm complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces
354.6
-
-
21.13 : Providing and fixing 100 mm brass locks ( best make of approved quality ) for aluminium doors including necessary cutting and making good etc. complete
266
-
-
Providing and fixing in position frameless fixed glazing using 12mm toughened glass fitted with patch fittings of approved brand or manufacture as detailed in the draiwng of specified size including supplying and fixng necessary holdfasts, screws for fixing cleats, toughened glass with all labour and materials complete as per drawings and as directed.
132.84
-
-
Frosted film - Supply and installation of 3M make frosted film pattern throughout all the internal glass panels wherever required of approx. 1.5 m height as per the approved pattern.
1273.42
-
-
25.1 : Providing and supplying aluminium extruded tubular and other aluminium sectionsas per the architectural drawings and approved shop drawings , the aluminiumquality as per grade 6063 T5 or T6 as per BS 1474,including super durable powdercoating of 60-80 microns conforming to AAMA 2604 of required colour and shadeas approved by the Engineer-in-Charge. ( The item includes cost of material suchas cleats, sleeves, screws etc. necessary for fabrication of extruded aluminiumframe work. Nothing extra shall be paid on this account).
12028.38
-
-
25.2 : Designing, fabricating, testing, protection, installing and fixing in position semi(grid) unitized system of structural glazing (with open joints) for linear as well ascurvilinear portions of the building for all heights and all levels, including:a) Structural analysis & design and preparation of shop drawings for the specifieddesign loads conforming to IS 875 part III (the system must passed the proof testat 1.5 times design wind pressure without any failure), including functional designof the aluminum sections for fixing glazing panels of various thicknesses, aluminiumcleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clampsetc., structural and weather silicone sealants, flashings, fire stop (barrier)-cumsmokeseals, microwave cured EPDM gaskets for water tightness, pressureequalisation & drainage and protection against fire hazard including:b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3Dimentional movement for achieving perfect verticality and fixing structural glazingsystem rigidly to the RCC/ masonry/structural steel framework of building structureusing stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetalliccontacts with nuts and washers etc. of stainless steel grade 316, of the requiredcapacity and in required numbers.c) Providing and filling, two part pump filled, structural silicone sealant and onepart weather silicone sealant compatible with the structural silicone sealant ofrequired bite size in a clean and controlled factory / work shop environment ,including double sided spacer tape, setting blocks and backer rod, all of approvedgrade, brand and manufacture, as per the approved sealant design, within and allaround the perimeter for holding glass.d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thickand of sizes, shapes and profiles, as required as per the site conditions, to seal thegap between the building structure and all its interfaces with curtain glazing tomake it watertight.e) Making provision for drainage of moisture/ water that enters the curtain glazingsystem to make it watertight, by incorporating principles of pressure equalization,providing suitable gutter profiles at bottom (if required), making necessary holesof required sizes and of required numbers etc. complete. This item includes costof all inputs of designing, labour for fabricating and installation of aluminium grid,installation of glazed units, T&P, scaffolding and other incidental charges includingwastages etc., enabling temporary structures and services, cranes or cradles etc.as described above and as specified. The item includes the cost of getting all thestructural and functional design including shop drawings checked by a structuraldesigner, dully approved by Engineer-in-charge.The item also includes the cost of all mock ups at site, cost of all samples of theindividual components for testing in an approved laboratory, field tests on theassembled working structural glazing as specified, cleaning and protection till thehanding over of the building for occupation. In the end, the Contractor shall providea water tight structural glazing having all the performance characteristics etc. allcomplete as required, as per the Architectural drawings, as per item description,as specified, as per the approved shop drawings and as directed by the Engineerin-Charge.Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extrudedaluminium section capping for fixing in the grooves of the curtain glazing andvermin proof stainless steel wire mesh shall be paid for separately under relevantitems under this sub-head. However, for the purpose of payment, only the actualarea of structural glazing (including width of grooves ) on the external face shallbe measured in sqm. up to two decimal places.Note:-2. The following performance test are to be conducted on structural glazingsystem if area of structural glazing exceeds 2500 Sqm from the certified laboratoriesaccreditated by NABL(National Accreditation Board for Testing and CalibrationLaboratories), Department of Science & Technologies, India. Cost of testing ispayable separately. The NIT approving authority will decide the necessity of testingon the basis of cost of the work, cost of the test and importance of the work.Performance Testing of Structural glazing systemTests to be conducted in the NBL Certified laboratories1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to+300pa) as perASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testingmethod for a range up to 2000 ml.”3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01-05 testingmethod for a range upto 2000 ml”4. Structural Performance Deflection and deformation by static air pressure test(1.5 times desing wind pressure without any failure) as per ASTME-330-10 testingmethod for a range upto 50 mm”5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method forQualitative test” Tests to be conducted on site6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi)upto 2000ml”
1047.72
-
-
Providing and supplying Single glazing comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with transmission 31% min,external reflection 14% and internal reflection 17% so as to match the colour and shade of the IGUs in the vision panels etc., all complete for the required performance as specified, as per the architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in - Charge. For payment, only the actual area of glass shall be measured in sqm. (Payment for fixing of Glass panels in the curtain glazing is included in cost of relevent item*).
1047.72
-
-
25.7 : Designing, fabricating, testing, installing and fixing in position Curtain Wall withAluminium Composite Panel Cladding, with open grooves for linear as well ascurvilinear portions of the building , for all heights and all levels etc. including:a) Structural analysis & design and preparation of shop drawings for pressureequalisation or rain screen principle as required, proper drainage of water to makeit watertight including checking of all the structural and functional design.b) Providing, fabricating and supplying and fixing panels of aluminium compositepanel cladding in pan shape in metalic colour of approved shades made out of4mm thick aluminium composite panel material consisting of 3mm thick FR grademineral core sandwiched between two Alumini um sheets (each0.5mm thick). Thealuminium composite panel cladding sheet shall be coil coated, with Kynar500based PVDF / Lumiflon based fluoropolymer resin coating of approved colourand shade on face # 1 and polymer (Service) coating on face # 2 as specified usingstainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backerrods etc.c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanisedwith serrations and serrated washers to arrest the wind load movement, fasteners,SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators toprevent bi-metallic contacts all complete required to perform as per specificationand drawing The item includes cost of all material & labour component, the cost ofall mock ups at site, cost of all samples of the individual components for testing inan approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wallwith aluminium composite panel cladding till the handing over of the building foroccupation. Base frame work for ACP cladding is payable under the relevantaluminium item.s The Contractor shall provide curtain wall with aluminiumcomposite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per theapproved shop drawings and as directed by the Engineer-in-Charge.However, for the purpose of payment, only the actual area on the external face ofthe curtain wall with Aluminum Composite Panel Cladding (including width ofgroove) shall be measured in sqm. up to two decimal places.
802.8
-
-
25.8 : Design supply & installation of suspended Spider Glazing system designed towithstand the wind pressure as per IS 875 (Part-III). The Suspended Systemheld with Spider Fittings of SS-316 Grade Steel of approved manufacturer withglass panel having 12 mm thick clear toughened glass held together withSS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins21 mm thick. The Glass fins and glass panel assembly shall be connected toSlab/beams by means of SS- 316 Grade stainless steel brackets & Anchor boltsand at the bottom using SS channel of 50x25x2mm using fastener & anchorbolts, non staining weather sealants of approved make, Teflon/ nylon bushesand separators to prevent bi-metallic contacts, all complete to perform as perspecification and approved drawings. The complete system to be designed toaccommodate thermal expansion & seismic movements etc. The joints betweenglass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assemblyto be filled with non staining weather sealant, so as to make the entire systemfully water proof & dust proof.The rate shall include all design, Engineering and shop drawing includingapproval from structural designer, labour, T&P, scaffolding, other incidentalcharges including wastage, enabling temporary services all fitting fixers nutbolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc.all complete. For the purpose of payment, actual elevation area of Glazingincluding thickness of joints and the portion of Glass panel inside the SS channelshall be measured.
90.93
-
-
Supply & Installation of Hindalco or equivalent section 85191. The Fins should be fixed at 200mm module based on the requirement to the suitable Installation frame of aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings .The maximum length of the fin shall be determined based on the wind load calculation and deflection.Powder coated aluminium (minimum thickness of powder coating 50 micron)
16294.95
-
-
9.105.3 : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with Zinc coating of 120 gms/ (both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.66 mm overall thickness Partition with 8 mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq cm, Bending Strength 100 kg/sq cm
277.92
-
-
Providing and fixing of Hollow metal doors made of pressed galvanized steel confirming to IS 277 with the following specification. Doors shall be with vision glass and louver as a part of complete assembly.Door frame shall be single rebate profile of size 100 x 57mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered and field assembled with self tabs. Frames to have inbuild grooved sealing system and shall be site fitted with PVC seal as standard. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with puff.Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (22guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clipon arrangement. The glass should be 5mm clear toughned glass of relavant rating of the door.All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test. Rate shall include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. Once frame installed should be filled with PUF as recomended by the manufacturer or engineer.1000mmX2100mm
22
-
-
Providing and fixing of Hollow metal doors made of pressed galvanized steel confirming to IS 277 with the following specification. Doors shall be with vision glass and louver as a part of complete assembly.Door frame shall be single rebate profile of size 100 x 57mm made out of minimum 1.20mm (18gauge) thick galvanized steel sheet. Frames shall be mitered and field assembled with self tabs. Frames to have inbuild grooved sealing system and shall be site fitted with PVC seal as standard. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Frames shall be filled with puff.Door leaf shall be 46mm thick fully flush double skin door, with or without vision lite. Door leaf shall be manufactured from minimum 0.8mm (22guage) thick galvanised steel sheet. The internal construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should be provided as per manufacturers recommendation with a clipon arrangement. The glass should be 5mm clear toughned glass of relavant rating of the door.All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test. Rate shall include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. Once frame installed should be filled with PUF as recomended by the manufacturer or engineer.1200mmX2400mm
47
-
-
Providing and fixing of hollow metal door at all levels from ISO 9001-2015 certified manufacturer. All hollow metal general doors with or without vision panel. Pressed galvanised steel Single /Double leaf to required sizes of approved make which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277. Door frame shall be double rebate profile of size 143 x 57mm made out of 2.0mm (14gauge) thick galvanized steel sheet. Frames shall be butted and field assembled with bolts. The inside face of the frame face trim to rebate height should be protected with 2.0 mm thick lead line. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the strike jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for doors on the clear masonry opening.Door leaf shall be 48mm thick fully flush double skin door. Door leaf shall be manufactured from 1.2mm (18guage) thick galvanised steel sheet. The internal construction of the door should be rigid with lead line of 2.0mm thick all across the inside of the exposed surface. In addition the door should have a basic infill steel stiffened special core with necessary reinforcement both on top and bottom. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI Standard. The edges should be interlocked with lock seam. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Approved hardware make : Lawrence / Gallery / Zero.All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule. 900mmX2100mm
2
-
-
Providing and fixing of hollow metal door at all levels from ISO 9001-2015 certified manufacturer. All hollow metal general doors with or without vision panel. Pressed galvanised steel Single /Double leaf to required sizes of approved make which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277. Door frame shall be double rebate profile of size 143 x 57mm made out of 2.0mm (14gauge) thick galvanized steel sheet. Frames shall be butted and field assembled with bolts. The inside face of the frame face trim to rebate height should be protected with 2.0 mm thick lead line. All provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door silencers should be provided on the strike jamb. Frames should be provided with back plate bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for doors on the clear masonry opening.Door leaf shall be 48mm thick fully flush double skin door. Door leaf shall be manufactured from 1.2mm (18guage) thick galvanised steel sheet. The internal construction of the door should be rigid with lead line of 2.0mm thick all across the inside of the exposed surface. In addition the door should have a basic infill steel stiffened special core with necessary reinforcement both on top and bottom. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers as per ANSI Standard. The edges should be interlocked with lock seam. For pair of doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. Approved hardware make : Lawrence / Gallery / Zero.All doors and frames shall be finished Pure Polyster Powder coated and shall have passed minimum 500 hours of salt sprey test. Rate should include supply and installation of door and hardware as a complete assembly as mentioned in the door and hardware schedule.1800mmx2400mm
9
-
-
9.161 : Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontalside & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mmthick GI sheet ( Zinc coating not less than 120gm/m2) suita2ble for mounting 120min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineralwool Insulation having density min 96Kg/m2 . The frame will have a provision ofG.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style ofsize M10 x 80 ) suitable for fixing in the opening along with Factory madeTemplate for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire ratedglazed shutter . The frame shall be finished with a approved fire resistant primeror Powder coating of not less than 30 micron in desired shade as per thedirections of Engineer - in- charge . (Cost of SS ball bearing hinges is excluded)
717.4
-
-
9.162 : Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minFire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certifiedas per laboratory approved by Engineer-in-charge, with suitable mounting ondoor frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mmwide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet(zinc coating not less than 120gm/m²) duly filled mineral wool insulation havingdensity min 96 kg/m³ and fixing with necessary stainless steel ball bearing hingesof size 100x89x3mm of approved make, including applying a coat of approvedfire resistant primer or powder coating not less than 30 micron etc all completeas per direction of Engineer-in-charge (panelling to be paid for seperately
349.35
-
-
9.164 : Providing and fixing glazing in fire resistant door shutters, fixed panels & partitionsetc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mmfrom the edges and 150 mm c/c , including applying a coat of approved fire resistantprimer/powder coating of not less than 30 micron on G.I. beading, & special ceramictape of 5 x 20 mm size etc complete in all respect as per direction of Engineer-incharge.The glass shall be clear, toughened, interlayered, non-wired fire resistant having11 mm thickness of approved brand with 120 minutes of fire resistance both integrity &radiation control (EW120) and minimum 15 min of insulation (EI15) and having a soundreduction of ?37dB and LT of 86%. Glass shall be compliant to class 2(B)2 category ofImpact Resistance as per EN 12600. The glass should be manufactured in UL & TUVaudited Facility and including UL-EU Certification.The maximum glazing size cannotbe more than 1100 mm x 2200 mm (w x h) or 2.42 sq mts in total area. The test report forthe complete system (Glazed Door or Partition) will be considered valid only if it containsthe stamp and signature of the authorized signatory from the glass manufacturer.(Actual glass size is to be measured at site for payments).
59.67
-
-
9.139 : Providing and fixing panic bar / latch (Double point ) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer -in-charge, all complete.
68
-
-
9.165.1 : Providing and fixing bright /matt finished Stainless Steel handles of approved
quality & make with necessary screws etc all complete.125 mm
68
-
-
Steel works
-
-
-
13.52.1 : Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work
5999.03
-
-
Flooring &Waterproofing
-
-
-
Vinyl flooring - Providing and installing PUR reinforced homogeneous Vinyl Flooring of approved make and colour / shade with skirting (done over coving cum capping pad of size 100x30mm) upto 100mm height, sheet 2 mtr wide and 15 - 23 mtr long, having a nominal total thickness of the wear layer of 2 mm and are produced with Phthalate-free Technology and total VOC emmissions 10ug/m3 (after 28 days). The Slip Resistance should meet the R9 group and should be chemical resistance as per EN 423 & bacterial resistance as per EN ISO 846: Part C. The impact sound reduction should be as per EN ISO 717/2. The wear resistance should be tested as per EN 649 and and should come under the T Group criteria.The Light fastness should be tested in according to ISO-105 B02 and should be rated >6. The thermal resistance should be 0.01 m2 K/W. The static electrical discharge should be 2kV (EN1815). Installation : It is important to ensure the sub floor on which the sheet is being laid is on smooth, flat & free from moisture, grease, etc.In case of uneven sub floor upto 3mm the same should be levelled by self levelling compound. The moisture level present in the sub floor should be less than 8% before installation of the floor.The installation shall be undertaken as per the manufacturer's installation instructions and as directed by the Engineer-in-Charge. The joints should be minimum and heat welded with matching PVC rod so as to get a seamless perfect level surface. The rate shall be inclusive of cost and conveyance of all materials, labour etc complete as directed by the Engineer in charge. - for sterile areas
399.95
-
-
11.41.2 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
2614.85
-
-
8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm
1973.16
-
-
22.5 : Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg /sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
3302.69
-
-
19.16 : Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)Complete as per design
40
-
-
False Ceiling Works
-
-
-
Aluminium Non perforated false ceiling - Providing & Fixing true horizontal level swing down suspended ceiling comprising of approved make Aluminum Clip in Swing Down with double pip self-leveling feature and special tabs to allow swing down of tile to enable plenum access with plain visual consisting of 600X600 mm clip in plain tiles of 0.7mm uniform thickness Aluminum with bevel edge in approved color precoated with primer coat at the rear side with Light Reflectance > 60%.Tiles should have fire performance of Class A2-s1.d0 as per EN13501.The grade of aluminiumshall mandatorily be AA 3003. The AluminiumTile shall mandatorily be RoHS Compliant (Resistance of Hazardous Substance).Compliant certificate shall be provided on demand.The tile shall maintain uniform Thickness of 0.7mm across all areas of tiles with no deviation. The tile shall have paint thickness of 25 microns to enable better scratch resistance.The tile shall have the ability to combine the main light with extra illumination providing 77% light reflectance & enables to achieve light uniformity. The tile shall have g Ceiling Attenuation Class of 44db. It shall withstands upto 150 Scrub cycle using Scrubablity tester as per ASTM D 2486. The tile shall offer superior wash performance without compromising panel finish integrity using a washablity tester as per ASTM D 4828. Installation: To comprise 3000mm long ‘C’ channels spaced at 1200mm centers securely fixed to the structural soffit by support clamp & approved hangers.The last hanger at the end of each C channel should not be greater than 600mm from the adjacent wall. Use a C-channel connector for splicing two pieces of C-channels. 4000mm spring tee bars shall be spaced at 600mm centers in a direction perpendicular to the C-channels and shall be secured at every intersection with C channel using a tee bar hanger. Use T bar connector to splice two pieces of spring tee bars. Tiles should be clipped in between two spring tee bars from below. This is a downward installation. All full panels can be removed and reinstalled without movement up into the plenum area. Perimeter trims of approved color secured to walls at 450mm maximum centers. Cut tiles to be secured to the wall angles using a spring clamp. The installation shall be undertaken as per the manufacturer’s installation instructions and as directed by the Engineer-in-Charge.
1000.85
-
-
12.52.1 : Providing and fixing tiled false ceiling of approved materials of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams per sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85x 30x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer -in-charge.GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending
37718.27
-
-
12.58.1 : Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long space between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening of services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x 1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.8 mm thick fully perforated calcium silicate board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 Kg/ sq. cm, bending strength 100 Kg/sq. cm, of size 595x595 mm, having perforation of dia, 10 mm with minimum perforated area 18% with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.85, with 50 mm thick rockwool of 48 Kg/cum backing.
2614.85
-
-
Finishes
-
-
-
13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
136408.78
-
-
13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
95075.48
-
-
13.80 : Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
59971.53
-
-
Finishing & Roofing
-
-
-
Poly carbonate sheet roofing -Supply and installation of 2mm thick Poly-carbonate sheet roofing of approved make, embossed clear with UV protection coating/treatment and weight not less than 2400 gms/ sqm. It shall be fire retardant and confirming to IS 14443. the rate shall include aluminium leak proofing and fixing management system with EPDM rubber gaskets, silicone sealant etc. complete as required and as per the direction of engineer in chargeexcluding purlins, rafters and trusses and including cutting to size and shape wherever required.
3883.15
-
-
12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
5632.7
-
-
12.7.1 : Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m2
230
-
-
Public Health Engineering (PHE) System
SANITARY FIXTURES
-
-
-
Providing and fixing White Vitreous China Extended Wall Mounted EWC, Complete Set with 3/6 LPF Dual Cistern, overall size 765 x 370 x 650mm. or as per approved model and shape, including Cistern Fittings, Soft Close Seat Cover, bolts, nuts, washers, expansion/ rawl sleeves, gasket etc. complete, and fixing to wall, as per manufacturer's instruction and to the approval of Engineer-in-charge.
360
-
-
Providing and fixing sanitary fixtures for handicapped toilet including one number Extended wall mount closet with soft close seat cover and cistern one wash basin, one pair mounting brackets,one number elbow operated pillar cock and all other related fittings like waste coupling one number hinged rail 76 cm & 4 nos. of grab rails 60cm etc designed for people with special needs comes with as per manufactures specification including cutting and making good the walls and floors wherever required as per drawing and as directed by Engineer in charge.
15
-
-
Supplying, installing, testing & commissioning at site in position white / colour vitreous china wash basin (480x365x205mm) with C.I./MS brackets painted white, C.P brass waste coupling of standard pattern, 32mm dia C.P, basin Pillarcock with aerator, including cutting & making good the walls wherever required complete.
Wash basin below counter type with aerator PillarCock.
50
-
-
17.7.4 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Flat back wash basin size 550x400mm with single 15 mm C.P.brasspillar taps
350
-
-
17.7.9 : Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Surgeon Type wash basin of size 660x460 mm with single 15 mm C P. brass pillar taps with elbow operated levers ISI marked
55
-
-
17.80 : Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx.size 610x390x370 mm having pre & post flushing with water ( 250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer - in-charge.
90
-
-
8.10.2 : Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in Charge and finished smooth.Granite Stone of approved shade
30
-
-
Hot & cold CP aerator wall mixer unit - Providing, Fixing, testing and commissioning Of Hot & cold CP wall mixer unit with long bend pipe for overhead shower with all accessories.
15
-
-
50.17.1.3 : Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
80
-
-
17.72 : Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms
80
-
-
50.17.1.5 : Supplying and fixing CP Health Faucet superior quality ( Jagur or equvalent make ) including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
375
-
-
50.17.1.1 : Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.
80
-
-
18.21.2.1 : Providing and fixing uplasticised PVC connection pipe with brass unions:45 cm length15 mm nominal bore
845
-
-
18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore
410
-
-
17.10.1.1 : Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required:Kitchen sink with drain board510x1040 mm bowl depth 250 mm
2
-
-
17.11.2 : Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm
70
-
-
Providing, fixing, testing, and commissioning at site Kitchen Sink Cock with aerator, Wall Mounted Type 15mm. nominal bore, overall dimensions: 208x237mm, including all necessary accessories, all as per manufacturer's instruction and to the approval of the Engineer-in-charge.
4
-
-
Providing, fixing, testing, and commissioning at site Single Lever Surgical Purpose Elbow Action Sink Mixer (Wall Mounted)with aerator Extended Operating Lever, Connecting legs & wall flanges, 15mm. nominal bore, including all necessary accessories, all as per manufacturer's instruction and to the approval of the Engineer-in-charge.
70
-
-
18.52.1 : Providing and fixing C.P brass stop cock ( concealed) of standard design and of approved make conforming to IS: 893115 mm nominal bore
65
-
-
18.22.1 : Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet:100 mm diameter
80
-
-
18.53.1 : Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore
1220
-
-
17.34.1 : Providing and fixing toilet paper holder:C.P. brass
4
-
-
Supplying, installing, testing & commissioning at site in position Grab Bar up to 600mm complete.
10
-
-
17.31 : Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
317
-
-
17.71 : Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms
80
-
-
C. P. Robe Hook,60mm. Dia. x 45mm. High.
375
-
-
Providing,fixing testing and commissioning 1½"x 40x300 Plastic P Trap (P Trap) Adjusting pipe 120mm, drain elbow 220mm.
632
-
-
INTERNAL DRAINAGE
-
-
-
Supplying, Installing, Testing & Commissioning at site in position uPVC pipe (SWR) of Type B (IS:13592) including injection moulded fittings with bosses where required eg 90 Degree, 45 Degree bends, Y, couplings, adapters,rodding eye & clamping with Universal clamps, Anchor fastners(10mm), Threaded Rod(10mm), nuts, washers etc complete; and jointing with approved adhesive by manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site (For Soil & Waste pipes -Internal).
160mm OD
30
-
-
Supplying, Installing, Testing & Commissioning at site in position uPVC pipe (SWR) of Type B (IS:13592) including injection moulded fittings with bosses where required eg 90 Degree, 45 Degree bends, Y, couplings, adapters,rodding eye & clamping with Universal clamps, Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete; and jointing with approved adhesive by manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site (For Soil & Waste pipes -Internal).
110mm OD
3700
-
-
Supplying, Installing, Testing & Commissioning at site in position uPVC pipe (SWR) of Type B (IS:13592) including injection moulded fittings with bosses where required eg 90 Degree, 45 Degree bends, Y, couplings, adapters, rodding eye & clamping with Universal clamps, Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete; and jointing with approved adhesive by manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site (For Soil & Waste pipes -Internal).
75mm OD
2500
-
-
50.18.9.16.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall
1500
-
-
50.18.9.15.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 6 Kgf/cm2 - External work - Exposed on wall
25
-
-
50.18.9.14.1 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall
260
-
-
50.18.8.6.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 50 mm pipe 6 kgf/cm2
400
-
-
50.18.8.5.2 : Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 40 mm pipe 6Kgf/cm2
250
-
-
Supplying, Installing, Testing & Commissioning at site in position uPVC pipe (SWR) of Type A (IS:13592) including injection moulded fittings with bosses where required eg 90 Degree, 45 Degree bends, Y, couplings, adapters,rodding eye & clamping with Universal clamps, Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete; and jointing with approved adhesive by manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site (For Vent pipes -Internal).
75mm OD
100
-
-
Supplying, Installing, Testing & Commissioning at site in position uPVC pipe (SWR) of 4kg/cm2 (IS:4985)including injection moulded fittings with bosses where required eg 90 Degree, 45 Degree bends, Y, couplings, adapters,rodding eye & clamping with Universal clamps, Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete; and jointing with approved adhesive by manufactures including cutting and making good the walls and floors or surface mounted with clamps as required at site (For Vent pipes -Internal).
63mm OD
275
-
-
Supplying, Installing, Testing & Commissioning at site in position Ring uPVC pipe (SWR) of Type B(IS:13592) including SWR jointing with Rubber Ring Seal (IS 5382) PVC Moulded (IS 14735 )fittings with bosses where required eg.Door tees, Door bends, 'Y', bends, clamps, couplings, adapters, rodding eye and cowls with sealing grooves and clamping with Position, including cutting and making good the walls and floors as required at site (For Vertical & Horizontal Shaft piping).
Core Cutting in RCC Structure shall measured separately.
Clamping details - For Vertical Shafts
G.I. "U" bolts (8 mm thick) on G.I. slotted rails (1.6 / 2.5 mm thick) , Rail Leg 2 1/2 ''STD Powder Coated
Clamping details - For Suspended lines
G.I. "U" bolts (8 mm thick) on Heavy Duty G.I.slotted rails(2.5 mm thick) or Clamping with Universal clamps, Anchor fastners(10mm), Threaded Rod(10mm), nuts, washers etc complete.
160mm OD
115
-
-
Supplying, Installing, Testing & Commissioning at site in position Ring uPVC pipe (SWR) of Type B(IS:13592) including SWR jointing with Rubber Ring Seal (IS 5382) PVC Moulded (IS 14735 )fittings with bosses where required eg.Door tees, Door bends, 'Y', bends, clamps, couplings, adapters, rodding eye and cowls with sealing grooves and clamping with Position, including cutting and making good the walls and floors as required at site (For Vertical & Horizontal Shaft piping).
Core Cutting in RCC Structure shall measured separately.
Clamping details - For Vertical Shafts
G.I. "U" bolts (8 mm thick) on G.I. slotted rails (1.6 / 2.5 mm thick) , Rail Leg 2 1/2 ''STD Powder Coated
Clamping details - For Suspended lines
G.I. "U" bolts (8 mm thick) on Heavy Duty G.I.slotted rails(2.5 mm thick) or Clamping with Universal clamps, Anchor fastners(10mm), Threaded Rod(10mm), nuts, washers etc complete.
110mm OD
1500
-
-
Supplying, Installing, Testing & Commissioning at site in position Ring uPVC pipe (SWR) of Type B(IS:13592) including SWR jointing with Rubber Ring Seal (IS 5382) PVC Moulded (IS 14735 )fittings with bosses where required eg.Door tees, Door bends, 'Y', bends, clamps, couplings, adapters, rodding eye and cowls with sealing grooves and clamping with Position, including cutting and making good the walls and floors as required at site (For Vertical & Horizontal Shaft piping).
Core Cutting in RCC Structure shall measured separately.
Clamping details - For Vertical Shafts
G.I. "U" bolts (8 mm thick) on G.I. slotted rails (1.6 / 2.5 mm thick) , Rail Leg 2 1/2 ''STD Powder Coated
Clamping details - For Suspended lines
G.I. "U" bolts (8 mm thick) on Heavy Duty G.I.slotted rails(2.5 mm thick) or Clamping with Universal clamps, Anchor fastners(10mm), Threaded Rod(10mm), nuts, washers etc complete.
75mm OD
50
-
-
Supplying, Installing, Testing & Commissioning at site in position Ring uPVC pipe (SWR) of Type A(IS:13592) including SWR jointing with Rubber Ring Seal (IS 5382) PVC Moulded (IS 14735 )fittings with bosses where required eg.Door tees, Door bends, 'Y', bends, clamps, couplings, adapters, rodding eye and cowls with sealing grooves and clamping with Position, including cutting and making good the walls and floors as required at site (For Vertical & Horizontal Shaft piping for rainwater/Vent).
Clamping details - For Vertical Shafts
G.I. "U" bolts (8 mm thick) on G.I. slotted rails (1.6 / 2.5 mm thick) , Rail Leg 2 1/2 ''STD Powder Coated
Clamping details - For Suspended lines
G.I. "U" bolts (8 mm thick) on Heavy Duty G.I.slotted rails(2.5 mm thick) or Clamping with Universal clamps, Anchor fastners(10mm), Threaded Rod(10mm), nuts, washers etc complete.
110mm OD
675
-
-
Supplying, Installing, Testing & Commissioning at site in position Ring uPVC pipe (SWR) of Type A(IS:13592) including SWR jointing with Rubber Ring Seal (IS 5382) PVC Moulded (IS 14735 )fittings with bosses where required eg.Door tees, Door bends, 'Y', bends, clamps, couplings, adapters, rodding eye and cowls with sealing grooves and clamping with Position, including cutting and making good the walls and floors as required at site (For Vertical & Horizontal Shaft piping for rainwater/Vent).
Clamping details - For Vertical Shafts
G.I. "U" bolts (8 mm thick) on G.I. slotted rails (1.6 / 2.5 mm thick) , Rail Leg 2 1/2 ''STD Powder Coated
Clamping details - For Suspended lines
G.I. "U" bolts (8 mm thick) on Heavy Duty G.I.slotted rails(2.5 mm thick) or Clamping with Universal clamps, Anchor fastners(10mm), Threaded Rod(10mm), nuts, washers etc complete.
75mm OD
675
-
-
Supplying, Installing, Testing & Commissioning at site in position Ring uPVC pipe of 4kg/cm2 (IS:4985)) including SWR jointing with Rubber Ring Seal (IS 5382) PVC Moulded (IS 14735 )fittings with bosses where required eg.Door tees, Door bends, 'Y', bends, clamps, couplings, adapters, rodding eye and cowls with sealing grooves and clamping with Position, including cutting and making good the walls and floors as required at site (For Vertical & Horizontal Shaft piping for rainwater/Vent).
Clamping details - For Vertical Shafts
G.I. "U" bolts (8 mm thick) on G.I. slotted rails (1.6 / 2.5 mm thick) , Rail Leg 2 1/2 ''STD Powder Coated
Clamping details - For Suspended lines
G.I. "U" bolts (8 mm thick) on Heavy Duty G.I.slotted rails(2.5 mm thick) or Clamping with Universal clamps, Anchor fastners(10mm), Threaded Rod(10mm), nuts, washers etc complete.
63 mm OD(4kg/cm2)
350
-
-
Deep Seal uPVC fabricated Multi floor trap - Providing, Fixing, testing and commissioning at site in position Deep Seal (7”) uPVC Fabricated Multi Floor Trap, with suitable supporting on GI slotted rails (1.6mmthick) full threaded rod, Anchor fasteners etc. complete in all respects - 50/75 mm dia inlet/outlet (In Ceiling)
800
-
-
uPVC fabricated Multi floor trap - Providing, Fixing, testing and commissioning at site in position uPVC Fabricated Multi Floor Trap, with thrust block support including complete cost o cutting chases and making good the walls in all respects - 50/75 mm dia inlet/outlet (In Sunken)
90
-
-
Supplying, installing, testing & commissioning at site in position 110mm dia deep seal PVC P Trap with boss tee and access cap including all necessary fittings and supports complete.
50
-
-
C.P. cast brass or stainless steel Square Flat cut lock anti cockroach grating cover - Providing and Fixing Heavy Duty Stainless Steel Square Flat cut lock anti Cockroach Trap Stainless Steel A ISI 304 with 125x125 mm. Grating, for 110mm. Floor Traps.
890
-
-
Heavyduty stainless steel cover for Concealed Floor Trap for Urinal - Providing and Fixing 125x125mm dia Heavyduty stainless steel cover for Concealed Floor Trap ISI 304 Cover, for Urinal.
50
-
-
Providing and Fixing Floor Clean Out Cover with Heavy Duty, Stainless Steel, Stainless Steel A ISI 304 sealed, threaded covers, with 153x153mm. including suitable keys for opening, if required.-75mm
30
-
-
Heavyduty stainless steel cleanout cover - Providing and Fixing Heavy Duty Stainless Steel A ISI 304 Clean out Cover, sealed, threaded covers, including suitable insert keys for opening, if required. - For 110mm
35
-
-
17.35.1.3 : Providing and fixing soil, waste and vent pipes:100 mm diaHubless centrifugally cast (spun) iron pipes epoxy coated inside &outside IS:15905
150
-
-
17.38.1.3 : Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diaHubless centrifugally cast (spun) iron epoxy coated inside & outside asper IS:15905
35
-
-
17.39.1.3 : Providing and fixing plain bend of required degree.100 mm diaHubless centrifugally cast (spun) iron pipes epoxy coated inside &outside IS:15905
16
-
-
17.42.1.3 : Providing and fixing double equal plain junction of required degree.100x100x100x100 mmHubless centrifugally cast (spun) iron pipes epoxy coated inside &outside IS:15905
5
-
-
17.44.1.3 : Providing and fixing single equal plain junction of required degree:100x100x100 mmHubless centrifugally cast (spun) iron epoxy coated inside & outsideas per IS:15905
13
-
-
17.49.1.3 : Providing and fixing double equal plain invert branch of required degree:100x100x100x100 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as perIS:15905
2
-
-
17.50.1.3 : Providing and fixing single equal plain invert branch of required degree:100x100x100 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as perIS:15905
8
-
-
17.56.1.3 : Providing and fixing terminal guard:100 mmHubless centrifugally cast (spun) iron epoxy coated inside & outside as perIS:15905
1
-
-
17.60.1.3 : Providing and fixing trap of self cleansing design with screwed down or hinged grating without vent arm complete, including cost of cutting and making good the walls and floors:100 mm inlet and 100 mm outletHubless centrifugally cast (spun) iron epoxy coated inside & outside as perIS:15905
18
-
-
17.57A.1.1 : Providing and fixing shielded coupling for Hubless centrifugally cast iron pipeSS 304 grade coupling with EPDM rubber gasket
130
-
-
12.44 : Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
45
-
-
WATER SUPPLY
-
-
-
18.8.1 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.15 mm nominal outer dia pipes
220
-
-
18.8.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.20 mm nominal outer dia pipes
5850
-
-
18.8.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes& fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc.25 mm nominal outer dia pipes
225
-
-
18.7.1 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall15 mm nominal outer dia pipes
100
-
-
18.7.2 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall20 mm nominal outer dia pipes
3150
-
-
18.7.3 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall25 mm nominal outer dia pipes
1450
-
-
18.7.4 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall32 mm nominal outer dia pipes
1200
-
-
18.7.5 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall40 mm nominal outer dia pipes
200
-
-
18.7.6 : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge. Internal work - Exposed on wall50 mm nominal outer dia pipes
100
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2467) Fittings, fixing the pipe with Universal clamps/U bolt at 1.00 m spacing,Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
20 mm nominal outer dia. Pipes.
350
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2467) Fittings, fixing the pipe with Universal clamps/U bolt at 1.00 m spacing,Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
25 mm nominal outer dia. Pipes.
250
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2467) Fittings, fixing the pipe with Universal clamps/U bolt at 1.00 m spacing,Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
32 mm nominal outer dia. Pipes.
375
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2467) Fittings, fixing the pipe with Universal clamps/U bolt at 1.00 m spacing,Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
40 mm nominal outer dia. Pipes.
375
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2467) Fittings, fixing the pipe with Universal clamps/U bolt at 1.00 m spacing,Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
50 mm nominal outer dia. Pipes.
300
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2466) Fittings, fixing the pipe with Universal clamps/U bolt at 1.00 m spacing,Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
65 mm nominal outer dia. Pipes.
450
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2466) Fittings, fixing the pipe with Universal clamps/U bolt at 1.00 m spacing,Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
80 mm nominal outer dia. Pipes.
200
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2466) Fittings, fixing the pipe with Universal clamps/U bolt at 1.00 m spacing,Anchor fastners(8mm), Threaded Rod(8mm), nuts, washers etc complete. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
100 mm nominal outer dia. Pipes.
200
-
-
Providing and fixing uPVC Pipes, Sch. 80 (ASTM D 1785) and with Sch. 80 (ASTM D 2467) Fittings, fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step uPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall - Ceiling and Shaft
80 mm nominal outer dia. Pipes.
200
-
-
18.18.1 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:15 mm nominal bore
110
-
-
18.18.2 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore
395
-
-
18.18.3 : Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm nominal bore
114
-
-
18.17.2 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore
108
-
-
18.17.3 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :40 mm nominal bore
25
-
-
18.17.4 : Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore
18
-
-
18.19.2.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):32 mm nominal boreHorizontal
2
-
-
18.19.3.1 : Providing and fixing gun metal non-return valve of approved quality (screwed end):40 mm nominal boreHorizontal
2
-
-
Brass Automatic Air Release Valves - Providing, Fixing, testing and commissioning at site in positions Brass Automatic Air Release Valves, of approved quality and make on the top of the vertical water supply pipes as per specification and drawing - 3/4"(20mm) dia
5
-
-
Supplying, Installing & Testing at site in position Brass Float valve (PN 6) of approved make with PP float & nipple with brass threaded insert, brass back nuts, piston and bolts etc complete in all respect to the satisfaction of Project Manager. 40mm dia (1 ½”)
1
-
-
Supplying, Installing & Testing at site in position Brass Float valve (PN6) of approved make with PP float & nipple with brass threaded insert, brass back nuts, piston and bolts etc complete in all respect to the satisfaction of Project Manager. 50mm dia (2”)
2
-
-
SS ball valve 15mm dia - Providing, Fixing at site in position full way lever operated forged SS ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings. - ½” (15mm) dia
120
-
-
SS ball valve 20mm dia - Providing, Fixing at site in position full way lever operated forged SS ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings. - ¾” (20mm) dia
100
-
-
SS ball valve 25mm dia - Providing, Fixing at site in position full way lever operated forged SS ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings. - 1” (25mm) dia
10
-
-
SS ball valve 32mm dia - Providing, Fixing at site in position full way lever operated forged SS ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings. - 1¼”(32mm) dia
5
-
-
SS ball valve 40mm dia - Providing, Fixing at site in position full way lever operated forged SS ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings. - 1½”(40mm) dia
5
-
-
SS ball valve 50mm dia - Providing, Fixing at site in position full way lever operated forged SS ball valve (screwed end)of brass body with forged brass hard chrome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings. - 2”(50mm) dia
6
-
-
Supplying, Installing & Testing at site in position CI Wafer swing type check Valve (PN-16) type with necessary fittings complete in all respect.50 mm dia
3
-
-
Supplying, Installing & Testing at site in position CI Wafer swing type check Valve (PN-16) type with necessary fittings complete in all respect.65 mm dia
5
-
-
HEAVY DUTY WITH PULSE OUTPUT -Water Meter conforming to ISO 4064 (1) Class B, Cold water meter with flanged ends, Body made of Epoxy Coated Cast Iron body with Metal Protective Lid, Magnetic coupled, Dry Dial with Straight Reading in KILO Litres, with completely removable and inte rchangeable internal mechanism. Highly Durable with Low Head Loss and sensitive to Low Flow Rate. Suitable for Horizontal Installation only & Have a ReAd Switch For pulse output. Output is compactable for SMART meters.Water meter 40mm
3
-
-
CLASS-‘B’-HEAVY DUTY-WITH PULSE OUT PUTWater Meter conforming to ISO 4064(1) Standards. BRASS BODY (SCREW TYPE) with BRASS REGISTRATION BOX Inferential Super Dry Dial Straight Reading in KILO Litres, Horizontal flow, Magnetically Coupled Water Meters as per IS:779 ISI marked & Conforming to ISO:4064(I) Class B standards with IP 68 Protection Class & Have a Reed Switch For pulse output. Output is compactable for SMART meters. Water meter 50mm
1
-
-
CLASS-‘B’-HEAVY DUTY-WITH PULSE OUT PUTWater Meter conforming to ISO 4064(1) Standards. BRASS BODY (SCREW TYPE) with BRASS REGISTRATION BOX Inferential Super Dry Dial Straight Reading in KILO Litres, Horizontal flow, Magnetically Coupled Water Meters as per IS:779 ISI marked & Conforming to ISO:4064(I) Class B standards with IP 68 Protection Class & Have a Reed Switch For pulse output. Output is compactable for SMART meters.Water meter 65mm
1
-
-
CLASS-‘B’-HEAVY DUTY-WITH PULSE OUT PUTWater Meter conforming to ISO 4064(1) Standards. BRASS BODY (SCREW TYPE) with BRASS REGISTRATION BOX Inferential Super Dry Dial Straight Reading in KILO Litres, Horizontal flow, Magnetically Coupled Water Meters as per IS:779 ISI marked & Conforming to ISO:4064(I) Class B standards with IP 68 Protection Class & Have a Reed Switch For pulse output. Output is compactable for SMART meters. Water meter 80mm
1
-
-
CI Y Strainer 2 ½” (65mm) dia - Supply,Installation,Testing and Commisioning of CI Y-type stainer with drain plug, SS screen 304 complete in all respects.
1
-
-
CI Y Strainer 3” (80mm) dia - Supply,Installation,Testing and Commisioning of CI Y-type stainer with drain plug, SS screen 304 complete in all respects -
2
-
-
CI Y Strainer 4” (100mm) dia - Supply,Installation,Testing and Commisioning of CI Y-type stainer with drain plug, SS screen 304 complete in all respects -
4
-
-
50mm dia. (32mm thick nitrile rubber insulation)
120
-
-
40mm dia. (32mm thick nitrile rubber insulation)
385
-
-
32mm dia. (19mm thick nitrile rubber insulation)
700
-
-
25mm dia. (19mm thick nitrile rubber insulation)
1225
-
-
20mm dia. (19mm thick nitrile rubber insulation)
3100
-
-
VALVES (E&M)
-
-
-
16.11.1.6 : Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedSupplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedSupplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedButterfly Valve ( Manual) 65 mm dia
18
-
-
16.11.1.5 : Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedSupplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedSupplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedButterfly Valve ( Manual) 80 mm dia
6
-
-
16.11.1.4 : Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedSupplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedSupplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedButterfly Valve ( Manual) 100 mm dia
6
-
-
16.11.1.2 : Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedSupplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedSupplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Supplying, fixing testing and commissioning of following valves, gauges and strainers for condenser water circulation as per specifications.Butterfly Valve ( Manual) with C I body SS disc nitrile sheet & O ring & PN 16 pressure rating as specifiedButterfly Valve ( Manual) of 150 mm dia
4
-
-
EXTERNAL SEWERAGE AND STORM WATER DRAIN
-
-
-
Supplying, Installing & Testing of pipes and conveying to position; and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation including Supplying, Installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for building drainage) complete(excluding excavation)
200mm OD
500
-
-
Supplying, Installing & Testing of pipes and conveying to position; and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation including Supplying, Installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for building drainage) complete(excluding excavation)
160mm OD
1650
-
-
Supplying, Installing & Testing of pipes and conveying to position; and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation including Supplying, Installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for building drainage) complete(excluding excavation)
110mm OD
255
-
-
Supplying, Installing & Testing of pipes and conveying to position; and jointing to true lines and gradients, PVC pipe of IS 4985(6kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation including Supplying,Installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for building drainage) complete(excluding excavation)
75mm OD
60
-
-
Supplying, Installing & Testing of pipes and conveying to position; and jointing to true lines and gradients, PVC pipe of IS 4985(4kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation including Supplying, Installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for building drainage) complete(excluding excavation)
200mm OD
100
-
-
Supplying, Installing & Testing of pipes and conveying to position; and jointing to true lines and gradients, PVC pipe of IS 4985(4kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation including Supplying, Installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for building drainage) complete (excluding excavation)
160mm OD
150
-
-
Supplying, Installing & Testing of pipes and conveying to position; and jointing to true lines and gradients, PVC pipe of IS 4985(4kg/cm2), jointing the pipe line as per specification, testing the pipe line after installation including Supplying, Installing specials like bends, couplers, sockets, connections etc. as per provisions of IS: 1742-1983 (Code of practice for rain water pipes) complete
110mm OD
150
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2466) Fittings, This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work (Including excavation)
20 mm nominal outer dia Pipes
85
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2466) Fittings, This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work (Including excavation)
25 mm nominal outer dia Pipes
45
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2466) Fittings, This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work (Including excavation)
32 mm nominal outer dia Pipes
110
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2466) Fittings, This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work (Including excavation)
40 mm nominal outer dia Pipes
20
-
-
Providing and fixing uPVC Pipes, Sch. 40 (ASTM D 1785) and with Sch. 40 (ASTM D 2466) Fittings, This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work (Including excavation)
50 mm nominal outer dia Pipes
75
-
-
Providing and fixing uPVC Pipes, 10kg/cm² and with PN-10 Fittings, This includes jointing of pipes & fittings with one step Heavy duty uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work (Including excavation)
110 mm nominal outer dia Pipes
75
-
-
Providing and fixing square-mouth PVC gully trap complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:100x100 mm size P type With Sewer bricks conforming to IS: 4885
30
-
-
19.16 : Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS: 10910 on 12 mm dia steeel bar conforming to IS:1786, having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures permanent identification mark to be visible even after fixing including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 ( 1cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size)Complete as per design
400
-
-
2.10.1.2 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia
2865
-
-
18.41.1A : Providing and filling sand of grading zone V or coarser grade, all - round the G.I. pipes in external workSub analysis item for sand filling component
115
-
-
4.1.10 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)
115
-
-
CIVIL WORK FOR RCC MANHOLE
-
-
-
2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
403.2
-
-
2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
134.4
-
-
Carriage of materials by mechanical transport including loading, unloading and stacking beyond 50m initial lead up to 5km, including all lifts including all lifts involved as directed by Engineer in charge. Excavated Earth/Rock
150
-
-
4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)
32.93
-
-
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement,including admixtures in recommended proportions as per IS: 9103 to accelerate,retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.“(Note :- Cement content considered in this item is @ 330 kg/cum.).All works upto plinth level
173.04
-
-
5.12 : Providing, hoisting and fixing up to floor level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) : 3 graded stone aggregate 20 mm nominal size)
120.96
-
-
5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
20764.8
-
-
5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
1512
-
-
5.9.10 : Centering and shuttering including strutting, etc. and removal of form for:Extra for arches, domes, vaults exceeding 6 m span
158.76
-
-
13.16.1 : 6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
1444.8
-
-
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
In stringers, treads,landings etc. of stair cases, including use of chequered plate wherever required, all complete
1600
-
-
MISCELLANEOUS ITEMS
-
-
-
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 130 mm thick - 160mm dia.
4
-
-
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 130 mm thick - 110mm dia.
1270
-
-
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 130 mm thick - 75mm dia.
10
-
-
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 130 mm thick - 50mm dia.
600
-
-
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 130 mm thick - 40mm dia.
10
-
-
Making holes in RCC beams, slabs floors etc, using core cutting machine, for laying pipes with standard clearance and rendering the same in RCC M 20, including nominal reinforcement wherever required, complete.The quoted rate shall also include water proofing compound(Conbextra GP-2 / GP-10) for complete sealing the same joints around the pipes for full depth etc to the satisfaction of the Project Manager including supply of all materials. RCC slabs (For Wash Basin, EWC & Floor Trap) 130 mm thick - 32mm dia.
80
-
-
600 X 600 mm (24" X 24") inside using self pigmented type double seal (Air & Water tight) FRP manhole cover and frame Light Duty (5 MT) with closed bottom (not thru & thru) lifting key holes & load tested as per IS:1726 & BS EN:124.
For OH Water tank
6
-
-
600 X 900 mm (24" X 36") inside using self pigmented type double seal (Air & Water tight) FRP manhole cover and frame Heavy Duty (25 MT) with closed bottom (not thru & thru) lifting key holes & load tested as per IS:1726 & BS EN:124.
For UG Sump
6
-
-
600 X 600 mm (24" X 24") inside using self pigmented type double seal (Air & Water tight) FRP manhole cover with frame Heavy Duty (25 MT) with closed bottom (not thru & thru) lifting key holes & load tested as per IS:1726 & BS EN:124.
For UG Sump
4
-
-
Supplying, Installing & Testing at site in position Fabricated 150mm (6")uPVC Astm Sch 80 Puddle flange in the overhead water tanks as per the drawings and the requirement of the Project Manager. - 150mm(6") uPVC Astm Sch 80 Puddle flange
2
-
-
Supplying, Installing & Testing at site in position Fabricated 100mm (4")uPVC Astm Sch 80 Puddle flange in the overhead water tanks as per the drawings and the requirement of the Project Manager. - 100mm(4") uPVC Astm Sch 80 Puddle flange
5
-
-
Supplying, Installing & Testing at site in position Fabricated 80mm (3")uPVC Astm Sch 80 Puddle flange in the overhead water tanks as per the drawings and the requirement of the Project Manager. - 80mm(3") uPVC Astm Sch 80 Puddle flange
6
-
-
Supplying, Installing & Testing at site in position Fabricated 65mm (2½") uPVC Astm Sch 80 Puddle flange in the overhead water tanks as per the drawings and the requirement of the Project Manager. - 65mm (2½") uPVC Astm Sch 80 Puddle flange
4
-
-
Supplying, Installing & Testing at site in position Fabricated 50mm (2")uPVC Astm Sch 80 Puddle flange in the overhead water tanks as per the drawings and the requirement of the Project Manager. - 50mm(2") uPVC Astm Sch 80 Puddle flange
6
-
-
Supplying, Installing & Testing at site in position Fabricated 40mm (1½")uPVC Astm Sch 80 Puddle flange in the overhead water tanks as per the drawings and the requirement of the Project Manager. -40mm (1½")uPVC Astm Sch 80 Puddle flange
2
-
-
Supplying, Installing & Testing at site in position Fabricated 32mm (1¼")uPVC Astm Sch 80 Puddle flange in the overhead water tanks as per the drawings and the requirement of the Project Manager. - 32mm 1¼"uPVC Astm Sch 80 Puddle flange
7
-
-
PLUMBING PUMPS AND HEAT PUMPS
-
-
-
Vertical multi stage centrifugal pumps (surface pump) for Domestic Water Supply - Supply, Installation, Testing and Commissioning 2 nos, Vertical multi stage centrifugal pumps (surface pump) set, having SS Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 12 lps @ 60 mtr head, Head range 40 to 75 mtrs (14.5 lps to 7.08 lps), ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run, Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge, Float Switches, Auto/Manuel Operation . The total system shall be assembled and tested at factory as per the duty conditions. (For Domestic Water from sump to OHT)
1
-
-
Monoblock pump for Flush Water - Supply, Installation, Testing and Commissioning 2 nos, monoblock pump set, having SS/CI/BRONZE Impeller and Shafts, CI/SS Casing, Mechanical Seal Each pumps should be capable to deliver 5 lps @ 60 mtr head, Head range 53 to 68 mtrs ''F'' class Insulation, IE3 Rated Electric Motors, IP 55 Protection, Hydraulic efficiency more than 67% motor efficiency more than 85% with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) Star Delta,having features of automatic pump change over in every Start/Stop, Dry run, Overload, Phase Reversal Protections etc. level controller for Auto Start/ Stop Function, Digital display,Pressure gauge, Float Switches, Auto/Manuel Operation . The total system shall be assembled and tested at factory as per the duty conditions.
1
-
-
Sewage Solid handling pumps - Supply, testing and commissioning of Submersible non clog Sewage Solid handling pumps. Control Panel for Controlling 2 Pumps, having SS Shaft and CI/SS Casing & Impeller, IP 68 Protection Each pumps should be capable to deliver 5 lps @ 10mtr head for each pump, solid handling 50mm with Wall mounting Microprocessor based common control Panel to operate the pumpset as ( 1Working + 1Standby ) having features of Cyclic Timer for Cascading Operation and Float Switch/Probe Suitable for Automatic Operation. The Panel should have the following Protection for Single Phase Prevention, Over Load Protection, Over /Under Voltage Protection, Dry Running Protection, Transient Surge Protection, with Auto/Manual Operation & Auto coupling . The Enclosure should be of IP 55 standards. The Panel should have BMS compatible thro RS 485 Communication(Modbus). (For Soil Tranfer Pump)
1
-
-
FILTER FEED PUMP SET.
Supply, Testing and Commission Filter Feed Pump Set, Submersible Type for Pumping Raw Water to Water Treatment Plant, 2 Pump System with One Working + 1 One Cyclically Stand by Pumps, each Pump of Capacity: 20M³/Hr. @ 45Mtr. Head, having SS Impeller, Shafts, Casing, with 3Ph, complete with Microprocessor Based Control Panel, for Auto and Cyclic Operation, with all Protection (Digital display, Low &high voltage protection, dry run, phase reversal, pump over load, etc.), Level Sensors / Float Switches in Treated Water & Raw Water Tanks and Control Cabling / Wiring between Level Sensors / Float Switches and Control Panel, Delivery Manifold, Isolating Valves, Non Return valves, Pressure Gauge, Fittings, Stainless Steel (Grade:304) Lifting Chains, Accessories etc. all as per Technical Specifications.
The Control Panel shall be capable operating the pumps (starts and stops) by sensing the level difference in water in the Treated Water Tank. Also; capable of ‘not starting or stopping the running pumps', when the water in the underground Raw Water Tank goes below the pre-set minimum level. The Pumps to be installed in the Underground Raw Water Tank and Common Control Panel in the Pump Room, in Basement Floor, approx. 100 Mtr. away from Raw Water Tank. The Underground Power Cabling between Pumps and Control Panel and Control Cabling between Control Panel & Level Sensor / Float Switch, in the Underground Raw Water Tank, shall be measured as a part of Electrical Work. The Quoted Price for the Pump Set shall be inclusive of all above requirement, necessary Level Sensors / Float Switches, Power Cabling, Control Cabling etc, except what measured as a part of Electrical Work, as detailed above.
1
-
-
Supplying, Installing, Testing & Commissioning at site hot water recirculation pump with suitable pressure switch, dry run protection & The Enclosure should be of IP 55 standards. The Panel should have BMS compatible thro RS 485 Communication( Modbus). Type : Thermostatic Controlled. Horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The shaft, impellers and chambers are made of stainless steel. The inlet and discharge parts are made of cast iron. It’s supporting up to 95 degree Celsius temperature, digital control panel with Time and Temperature settings facility.
Flow for each pump in LPS : 2.3
Head in mtr : 14
Head Range : 8 - 16 mtr
MOC : SS 304 Impeller
Total no of pump: 1 SET ( 1Working + 1Standby )
1
-
-
Supplying, Installing, Testing & Commissioning at site hot water recirculation pump with suitable pressure switch, dry run protection & The Enclosure should be of IP 55 standards. The Panel should have BMS compatible thro RS 485 Communication( Modbus). Type : Thermostatic Controlled. Horizontal, multistage, end-suction centrifugal pump with axial suction port and radial discharge port. The shaft, impellers and chambers are made of stainless steel. The inlet and discharge parts are made of cast iron. It’s supporting up to 95 degree Celsius temperature, digital control panel with Time and Temperature settings facility.
Flow for each pump in LPS : 1.1
Head in mtr : 10
Head Range : 9 - 18 mtr
Total no of pump: 1 SET ( 1Working + 1Standby )
1
-
-
Supply, installation, testing & commissioning of Solar assisted Heat pump, insulated pressurised SS storage tank, hot water expansion vessel, insulated piping between the system, valves & accessories required to complete the system in position with the following specification. 10,000 LPD, consisting of Solar Hot Water Panels of Aggregate Capacity: 5,000 LPD (50% of the total requirement), 58 Deg C required Insulated Hot Water Storage Tank suitable for 6 bar pressure SS 316 - 1no, 5000 Litre - Horizontal. COP of Heat pump 4
Circulation Pump between heat pump and storage tank, including control panel.
Plumbing work Between storage tank and heat pump CPVC Pipe with suitable CPVC Fittings. Suitable Brass Fittings like NRV, Y Strainer, Air Vent, MTA, FTA, Flow Switches, Pipeline Insulation
Electrical Work From Pump panel to heat pump 6 Square MM 4 core cable, 1.5 Square MM 3 core cable, 2.5 Square MM cable, Communication cable, 3 x 9Amps 3MP Contactors Coil Operated, PVC conduits for cables with suitable fittings etc., complete.
1
-
-
Supply, installation, testing & commissioning of Heat pump - Insulated storage tank, hot water expansion vessel, insulated piping between the system, valves & accessories required to complete the system in position with the following specification.
Heat Pump ( Working 400 LPH + Back Up 6KW Heating Coil ) - 60 Deg C.
Insulated Hot Water Storage Tank suitable for 6 bar pressure Horizontal Glasslined Hot Water Tank 1000 Litre. COP of Heat pump = 4
Plumbing work Inlet and Outlet Headers DN40 CPVC Pipe with suitable CPVC Fittings. Suitable Brass Fittings like NRV, Y Strainer, Air Vent, MTA, FTA, Flow Switches, Pipeline Insulation
Electrical Work From electric point to heat pump 6 Square MM 4 core cable, 1.5 Square MM 3 core cable, 2.5 Square MM cable, Communication cable, 3 x 9Amps 3MP Contactors Coil Operated, PVC conduits for cables with suitable fittings etc., Complete
1
-
-
Supply, Testing and Commission Submersible Type Storm Water Transfer Dewatering Pump Set, complete set with 1 working + 1 Standby Submersible non- clog pump , Solids handling: 40mm , and with Common Control Panel for automatic operation and Manually change over facility. Capacity 12 M3/Hr. at 10 Mtrs. head, each, with Three Phase with float switches/level sensors etc. necessary control valves, Pressure Gauges fittings and accessories, for discharging rain water from collection pits in basement floor, to lower strata. The price shall inclusive of all connected electrical work as detailed in the technical specification.
1
-
-
WATER TREATMENT PLANT
-
-
-
Supply, Installation, testing and commission Water Pre-Treatment Plant Capacity: 20M3 /Hr, for continuous operation of 10 Hr, complete with High Pressure Sand Filter, Activated Carbon Filter,with Multiport valves, Chemical Dosing etc as per final requirement, connected Pipe Work etc, all as per Technical Specifications.Filter Feed Pumps shall be measured seperately.
1
-
-
BOREWELL
-
-
-
23.1.1.1 : Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level.All types of soil 300 mm dia
60
-
-
23.3.3 : Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS : 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer- in- Charge.200 mm nominal size dia
60
-
-
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, upto 90 metre depth below ground level to form bore well of size 150 mm including flushing and cleaning the bore as specified by the Engineer in charge.Rocky strata including Boulders
120
-
-
Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 ( part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools plants & machineries required for the job, all complete as per direction of Engineer - in- Charge, beyond 90 metre depth below ground level to form bore well of size 150 mm including flushing and cleaning the bore as specified by the Engineer in charge.Rocky strata including Boulders
420
-
-
23.14.3 : Providing and fixing M.S. clamp of required dia to the top of casing / housing pipe of tubewell as per IS : 2800 ( part I), including ecessary bolts & nuts of required size complete.200 mm clamp
2
-
-
Providing, fixing, erecting, testing and commissioning Bore well submersible pump of approved make and required capacity, Three phase capable of discharging 120LPM @ 120mtrs head, head range of 54 to 132, Flow range 195 LPM to 90 LPM, having Impeller / Casing / Shaft / Motor Body Stainless steel, against the specified head including all accessories such as starter, switch board, 4 sq. mm, required length 3 core flat cable with water proof jointing additional cable, from the motor inside the well up to starter.
10
-
-
18.48 : Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
2000
-
-
SEWAGE TREATMENT PLANT
-
-
-
SPECIFICATION FOR SEWAGE TREATMENT PLANT OF 400 KLD CAPACITY WITH ULTRA FILTRATION
Supply, installation, testing & commissioning of Sewage Treatment Plant of 400 KLD capacity as per the specification detailed below Inlet Parameter pH: 5.5–9, BOD:300-400mg/l, COD:500-800mg/l, Suspended Solids:100-250mg/l, Oil&Grease:10- 50 mg/l Outlet Parameter pH:6.5–8.5, BOD:3mg/l, COD:50mg/l, Suspended Solids:20mg/l, Oil &Grease:1 mg/l, Total Nitrogen:10 The treatment system shall be complete with SS Coarse screen with 10mm holes suitable for screen chamber of size 1.50m x 0.80m x 1.00m Waste water transfer pump- 20m3/hr @ 10m Head, Self priming, non-clog, centrifugal (1 working + 1 standby)
Air Blowers for Equalization tank- Twin lobe, 200 m3/hr @ 4 bar Make: Ingersoll Rand/ Everest (1 working + 1 standby)
Diffusers for Equalization tank: Coarse Bubble, Non membrane, 90mm x 800mm. Make: Southern scogen (25 Nos.) Anaerobic Packing Media- MOC- PVC, Make: MM Aqua Diffusers for Aeration Tank- Fine Bubble, EPDM, 90mm x 1000mm. Make : Southern scogen (40 Nos.)
Air Blowers for aeration tank- Twin lobe, 475 m3/hr @ 4 bar Make: Ingersoll Rand/ Everest (1 working + 1 standby)
MBBR media: 27m3, MOC- polyethylene, Surface Area: 500m2/m3, Density: 0.93-0.96 gm/cc Make: Cooldeck, Veolia, Small Boss
Recirculation Pump: 40-50 m3/hr @ 8m Head, Self priming, non-clog, centrifugal (1 working +1 stanby)
Electronic dosing system: 0-4 lph @ 5.5kg/cm2, Make: E-dose, Pentair, Milton Roy HDPE Dosing tank- 100 litres (Make: Sintex) – 3 Nos.
Sludge Transfer pump: 5m3/hr @10m head, Self priming, non-clog, centrifugal (1 working + 1 standby)
Filter Feed Pump: 15m3/hr @ 30m Head, Monobloc pump (1 working + 1 standby)
Pressure Sand Filter: Size 1.5m Dia. X 1.8m Ht. MOC: MSEP complete with butterfly valves, frontal piping, backwash arrangement, Filter Media consisting of pebbles, quartz sand etc.
Activated Carbon Filter: Size 1.5m Dia. X 1.8m Ht. MOC: MSEP complete with butterfly valves, frontal piping, backwash arrangement, Filter Media consisting of pebbles, activated carbon with iodine value 1000 etc.
Hypochlorite Dosing system: 0-4 lph @ 5.5kg/cm2, HDPE Dosing tank- 100 litres (Make: Sintex)- 1 No. Electromagnetic flow meter with totalizer. Flow rate: 20 m3/hr, Make: ABB/ Adept
Plumbing works including supply, cutting, jointing, welding testing & commissioning all interconnecting pipelines of MS/ GI/ uPVC & Valves etc.
Electrical Works including Supply, installing, testing & commissioning of dust & vermin proof, floor mounted Control Panel made of 16SWG thick CRCA sheet complete with necessary components like MCB, SFU, contactors, OLRs including necessary cabling from control panel to equipments, earthing etc. Ultra filtration System: MS skid mounted Ultra filtration system including feed pumps(20m3/hr @ 30m Head, SS 316) backwash pump (40m3/hr @ 25m Head, SS 316), bag filter (50 & 100 µ) , UF membrane (TEAM), dosing system, backwash tank, Instrumentation item(pressure gauge, pressure switch, motorized valve, rota meter), PLC control panel for automatic operation etc
1
-
-
HT & LT Electrification System CABLES AND TERMINATION
-
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx400sq.mm Al Cable
1050
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx300sq.mm Al Cable
2750
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx240sq.mm Al Cable
1285
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx185sq.mm Al Cable.
745
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
3.5cx150sq.mm Al Cable.
1655
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx120sq.mm Al Cable
280
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
3.5cx95sq.mm Al Cable
980
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 3.5cx70sq.mm Al Cable
460
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. ;3.5cx50sq.mm Al Cable.
1795
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
4cx35sq.mm Al Cable
1350
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 4cx25sq.mm Al Cable
2115
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 4cx16sq.mm Al Cable
3206
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
4cx10sq.mm Al Cable
9745
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 4cx06sq.mm Al Cable
2865
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 3cx10sq.mm CU Cable
3965
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) ammended upto date. 3cx04sq.mm CU Cable
300
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
3cx2.5sq.mm CU Cable
180
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
4cx16sq.mm CU Cable
180
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
4cx10sq.mm CU Cable
1540
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
4C x 1.5sq.mm Cu Control Cable
600
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) ammended upto date.2C x 1.5sq.mm Cu Control Cable
450
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.1C x 150sq.mm Copper Flexible Cable
2940
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.
1C x 95sq.mm Copper Flexible Cable
360
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.
1C x 70sq.mm Copper Flexible Cable
300
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.1C x 50sq.mm Copper Flexible Cable
560
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.
1C x 35sq.mm Copper Flexible Cable
150
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.
1C x 25sq.mm Copper Flexible Cable
720
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.
1C x 16sq.mm Copper Flexible Cable
150
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.
1C x 10sq.mm Copper Flexible Cable
1200
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge
1C x 06sq.mm Copper Flexible Cable
1160
-
-
Supply drawings and clamping of the following PVC sheathed unarmoured power cable conductor of best conductivity copper solid/stranded FRLS conductor, XLPE insulated, PVC inner sheathed 1.1kV grade strictly conforming to IS:694:1990 of the following sizes in existing cable tray /wall using factory made heavy gauge GI/painted MS clamps. Space between clamps not exceeding 60cms amd making good the damages etc. as required and instructed by engineer in charge.
1C x 04sq.mm Copper Flexible Cable
600
-
-
Supply of following 11kV (E) grade XLPE insulated PVC sheathed armoured aluminium conductor HT power cable, insulation screened with extruded semi conducting compound in combination with copper tape suitable for 11kV earthed system confirming to relevant standard.
3cx300sq.mm XLPE Cable
1600
-
-
Supply &aying of DWC pipe in ground level excluding excavation 110/94 mm or nearest size.
1400
-
-
END TERMINATION
-
-
-
10.4.4 : Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:
300 sq. mm
10
-
-
10.5.4 : Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
300 sq. mm
2
-
-
10.6.4 : Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 300 sq. mm
6
-
-
9.1.31 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2X 400 sq. mm (82mm)
20
-
-
9.1.30 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2X 300 sq. mm (70mm)
78
-
-
9.1.29 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2X 240 sq. mm (62mm)
34
-
-
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2X 185 sq. mm (57mm)
22
-
-
9.1.26 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2 X 150 sq. mm (50mm)
30
-
-
9.1.25 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2 X 120 sq. mm (45mm)
10
-
-
9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2X 95 sq. mm (45mm)
14
-
-
9.1.23 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2X 70 sq. mm (38mm)
8
-
-
9.1.22 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 1/2 X 50 sq. mm (35mm)
50
-
-
9.1.35 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 35 sq. mm (32mm)
24
-
-
9.1.34 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 25 sq. mm (28mm)
42
-
-
9.1.33 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 16 sq. mm (28mm)
176
-
-
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4 X 10 sq. mm (25mm)
380
-
-
9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
3 X 10 sq. mm (22mm)
92
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required. 2C X 1.5 sq. mm
30
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
4C X 1.5 sq. mm
28
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
4C X 16 sq. mm (28mm)
8
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
4C X 10 sq. mm (25mm)
32
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
3C X 04 sq.mm
10
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
3C X 2.5 sq.mm
12
-
-
90.12.24.12 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.150 sq mm
84
-
-
90.12.24.10 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 95 sq mm
12
-
-
90.12.24.9 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 70 sq mm
8
-
-
90.12.24.8 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 50 sq mm
16
-
-
90.12.24.7 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 35 sq mm
6
-
-
90.12.24.6 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 25 sq mm
12
-
-
90.12.24.5 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 16 sq mm
4
-
-
90.12.24.4 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 10 sq mm
12
-
-
90.12.24.3 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 6 sq mm
44
-
-
90.12.24.2 : Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required. 4 sq mm
30
-
-
7.1.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and
refilling the trench etc as required.
Upto 35 sq. mm
300
-
-
7.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Above 35 sq. mm and upto 95 sq. mm
180
-
-
7.1.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Above 95 sq. mm and upto 185 sq. mm
120
-
-
7.1.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Above 185 sq. mm and upto 400 sq. mm
90
-
-
7.2.4 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation
including excavation, sand cushioning, protective covering and refilling the trench etc as
required.
Above 185 sq. mm and upto 400 sq. mm
80
-
-
7.6.1 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
Upto 35 sq. mm
150
-
-
7.6.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of
following size in the existing masonry open duct as required.Above 35 sq. mm and upto 95 sq. mm
175
-
-
7.6.3 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
Above 95 sq. mm and upto 185 sq. mm
110
-
-
7.6.4 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required.
Above 185 sq. mm and upto 400 sq. mm
90
-
-
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KVgrade of following size on cable tray as required.
Upto 35 sq. mm (clamped with 1mm thick saddle)
22776
-
-
7.8.2 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
2735
-
-
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
2055
-
-
7.8.4 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
4029
-
-
7.10 : Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate withinscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixingthe same in ground as required.
150
-
-
8.1.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
Above 120 sq. mm and upto 400 sq. mm
400
-
-
8.3.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
Above 120 sq. mm and upto 400 sq. mm
200
-
-
8.4.2 : Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing masonry open duct as required.
Above 120 sq. mm and upto 400 sq. mm
400
-
-
8.2.2 : Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size direct in ground in the same trench in one tier horizontal formation
including excavation, sand cushioning, protective covering and refilling the trench etc
Above 120 sq. mm and upto 400 sq. mm
600
-
-
14.4 : Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.
400
-
-
14.3 : Filling available excavated earth (excluding rock) in trenches, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 metres.
150
-
-
14.5 : Deduct for not consolidation by ramming and watering while re-filling with sand and or good soil in cable/ pipe laying.
150
-
-
14.13.3 : Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required100 mm dia
30
-
-
14.15.4 : Supplying and laying of following size owe HOPE pipe .lSI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.160 mm dia (OD-160 mm & ID-135 mm nominal)
400
-
-
POINT WIRING
-
-
-
1.10.3 : Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC
insulated copper conductor single core cable in surface / recessed medium class PVC conduit,
with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS
PVC insulated copper conductor single core cable etc as required.
Group C
5855
-
-
1.11 : Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
60
-
-
1.55.3 : Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
Group C
3108
-
-
1.14.1 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire
60200
-
-
1.14.2 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required
2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
91900
-
-
1.14.3 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
32000
-
-
1.14.4 : Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required
2 X 6 Sq.mm + 1 x 6 sq.mm earth wire
180
-
-
1.22.2 : Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.
100 mm X 100 mm X 60 mm deep
50
-
-
1.22.15 : Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.
250 mm X 300 mm X 60 mm deep
50
-
-
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
5/6 amps switch
50
-
-
1.24.3 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
15/16 amp switch
50
-
-
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
3 pin 5/6 amp socket outlet
50
-
-
1.24.5 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required
.6 pin 15/16 amp socket outlet
50
-
-
1.27.1 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
1 or 2 Module (75mmX75mm)
50
-
-
1.27.2 : Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
3 Module (100mmX75mm)
50
-
-
1.28.2 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
3 Module
50
-
-
1.28.4 : Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
6 Module
50
-
-
1.25 : Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
840
-
-
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or inrecess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 ampsmodular switch, connection etc. as required. (For light plugs to be used in non residentialbuildings).
1354
-
-
1.32 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
1258
-
-
Supplying and fixing suitable size modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required but excluding GI back box
238
-
-
Supplying and fixing suitable size modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A &15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required but excluding GI back box
238
-
-
Supplying and fixing suitable size modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet, connections etc. as required but excluding GI back box
2175
-
-
Supplying and fixing suitable size modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A &15/16 A modular socket outlet, connections etc. as required but excluding GI back box
1305
-
-
1.33 : Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
2750
-
-
1.56 : Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings).
620
-
-
1.57 : Supplying & fixing suitable size Gl box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. lCD
30
-
-
DISTRIBUTION BOARDS
-
-
-
90.11.1.16 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required. 8 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
1
-
-
90.11.1.15 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
2
-
-
90.11.1.19 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
6 way (8+12) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/ TP MCB as outgoing (IP 42/43)
25
-
-
90.11.1.14 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)
8
-
-
90.11.1.13 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
12 way (8+36) - three phase double cover (IP 42/43)
35
-
-
90.11.1.12 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
8 way (8+24) - three phase double cover (IP 42/43)
39
-
-
90.11.1.11 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
6 way (8+18) - three phase double cover (IP 42/43)
69
-
-
90.11.1.10 : Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required
4 way (8+12) - three phase double cover (IP 42/43)
47
-
-
2.3.1 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator
6 way, Double door
1
-
-
2.3.2 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator
8 way, Double door
39
-
-
2.3.3 : Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator
12 way, Double door
6
-
-
2.13.2 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
63 amps
1
-
-
2.13.1 : Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
40 amps
2
-
-
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
32 amps
8
-
-
Supplying and fixing following rating 25A, FP, 415 V, RCBO, having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
19
-
-
Supplying and fixing following rating 32A, FP, 415 V, RCBO, having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
19
-
-
Supplying and fixing following rating 25A, FP, 415 V, RCBO, having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
14
-
-
Supplying and fixing following rating 32A, FP, 415 V, RCBO, having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
80
-
-
Supplying and fixing following rating 40A, FP, 415 V, RCBO, having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
59
-
-
Supplying and fixing following rating 63A, FP, 415 V, RCBO, having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
2
-
-
Supplying and fixing following rating 25A, DP, 240 V, RCBO, having a sensitivity current 30 mA in the existing MCB DB complete wih connections, testing and commissioning etc. as required.
46
-
-
2.10.1 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
2799
-
-
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,;D curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single pole
1602
-
-
2.10.3 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Double pole
3
-
-
2.10.4 : Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Triple pole
80
-
-
Supplying and fixing 40 amps to 63 amps rating, 240/415 volts,C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole
78
-
-
2.11 : Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
1250
-
-
15.1 : Supplying,Installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high preformance, non regulating programmable type, suitable for connected load upto 10 Amp, for mounting height up to 2.8 Mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming and site etc. complete as required
30
-
-
15.4.3 : Supplying, installation, testing and commissioning of Astronomical time switch capable of following output in feeder pillars/ Lighting DBs for automatic switching On &OFF of street lights at sun set & sun ruse or twilight override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete ad required3 output (1output per phase) and suitable for three phase supply
1
-
-
Supply and fixing of following FP 415V, isolators in sheet steel powder coated enclosure with door interlock and padlock facility on surface confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.
50A FP Isolator with enclosure
1
-
-
Supply and fixing of following FP 415V, isolators in sheet steel powder coated enclosure with door interlock and padlock facility on surface confirming to IEC 60947-3 complete with all accesories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.
63A FP Isolator with enclosure
4
-
-
Supply and fixing of following FP 415V, isolators in sheet steel powder coated enclosure with door interlock and padlock facility on surface confirming to IEC 60947-3 complete with all accessories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation.
100A FP Isolator with enclosure
6
-
-
Supply and fixing of following FP 415V, isolators in sheet steel powder coated enclosure with door interlock and padlock facility on surface confirming to IEC 60947-3 complete with all accessories, connections, testing and commissioning etc as required and as instructed by engineer in charge also making good any damages made during installation. 800A FP Isolator with enclosure.
4
-
-
Supplying and fixing following rating, TPN, 415 volts, MCCB in MS Enclosure complete with connections, testing and commissioning etc. as required. 125 amps TPN MCCB
2
-
-
Supplying and fixing following rating, TPN, 415 volts, MCCB in MS Enclosure complete with connections, testing and commissioning etc. as required.
160 amps TPN MCCB
6
-
-
Supplying and fixing following rating, TPN, 415 volts, MCCB in MS Enclosure complete with connections, testing and commissioning etc. as required.
200 amps TPN MCCB
3
-
-
Supplying and fixing following rating, TPN, 415 volts, MCCB in MS Enclosure complete with connections, testing and commissioning etc. as required.
250 amps TPN MCCB
3
-
-
Fabrication, supply, erection, testing and commissioning of following capacity auto transfer switch ATys M 3s C30 with elclosure, bus bars and all accessories required for complate operation as per the drawing. The panel shall be Type Tested Assembly (TTA) cubicle type (panel and all switch gears should be type tested and certification should be submitted) as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/Wall mounted, front operated MV panel board made out of 16 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable.
200A 4P ATS
2
-
-
Fabrication, supply, erection, testing and commissioning of following capacity auto transfer switch ATys M 3s C30 with elclosure, bus bars and all accessories required for complate operation as per the drawing. The panel shall be Type Tested Assembly (TTA) cubicle type (panel and all switch gears should be type tested and certification should be submitted) as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/Wall mounted, front operated MV panel board made out of 16 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable.
250A 4P ATS
2
-
-
90.14.10.3 : Supply, conveyance and fixing the following types & current rated control gears & switchgears conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required.
23
-
-
2.18 : Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth,metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
30
-
-
2.20 : Supplying and fixing 30 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth,metal enclosed plug top alongwith 30 amps "C" curve, TPMCB, in sheet steel enclosure, onsurface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
15
-
-
2.19 : Supplying and fixing 20 amps 415volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top along with 20 amps "C" curve, TPMCB, in sheet enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
18
-
-
CONDUITS AND CABLE TRAYS
-
-
-
1.21.1 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm
34600
-
-
1.21.2 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm
30740
-
-
1.21.3 : Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm
1500
-
-
Supply and fixing of Perforated Cable tray with horizontal & vertical bends, reducers, Tees, cross over , suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The trays should be tested for a max. safe working load of 150 Kgs with a span distance of 1.5 meters and the deflection should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. The perforated tray shall be supplied with the standard length of 3 Mtr.
400 mm width x 60mm Height.
1970
-
-
Supply and fixing of Perforated Cable tray with horizontal & vertical bends, reducers, Tees, cross over , suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The trays should be tested for a max. safe working load of 150 Kgs with a span distance of 1.5 meters and the deflection should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. The perforated tray shall be supplied with the standard length of 3 Mtr.
500 mm width x 60mm Height.
230
-
-
Supply and fixing of Cable Ladder with horizontal & vertical bends, reducers, Tees,Cross over, supports, brackets and other accessories as required confirming to IEC-61537.The Cable Ladder shall be made of 2.0mm thick.The cable Ladder shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The cable ladder should be tested for safe working load of 310 Kg/ Mtr with a span distance of 2 Mtr the deflection should be within the limits as per standard. The cable ladder shall be supplied in standard length of 3000 mm. The rung size shall be of 30x15mm size suitable for fixing the cable clamps the space between the rungs shall be 300mm.
450 mm Width x 100 mm Height.
570
-
-
Supply and fixing of Cable Ladder with horizontal & vertical bends, reducers, Tees,Cross over, supports, brackets and other accessories as required confirming to IEC-61537.The Cable Ladder shall be made of 2.0mm thick.The cable Ladder shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The cable ladder should be tested for safe working load of 310 Kg/ Mtr with a span distance of 2 Mtr the deflection should be within the limits as per standard. The cable ladder shall be supplied in standard length of 3000 mm. The rung size shall be of 30x15mm size suitable for fixing the cable clamps the space between the rungs shall be 300mm.
600 mm Width x 100 mm Height.
255
-
-
Supply and fixing of Cable Ladder with horizontal &vertical bends, reducers, Tees,Cross over, supports, brackets and other accessories as required confirming to IEC-61537.The Cable Ladder shall be made of 2.0mm thick.The cable Ladder shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The cable ladder should be tested for safe working load of 310 Kg/ Mtr with a span distance of 2 Mtr the deflection should be within the limits as per standard. The cable ladder shall be supplied in standard length of 3000 mm. The rung size shall be of 30x15mm size suitable for fixing the cable clamps the space between the rungs shall be 300mm
900 mm Width x 100 mm Height.
675
-
-
Supply and fixing of Cable Ladder with horizontal &vertical bends, reducers, Tees,Cross over, supports, brackets and other accessories as required confirming to IEC-61537.The Cable Ladder shall be made of 2.0mm thick.The cable Ladder shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The cable ladder should be tested for safe working load of 310 Kg/ Mtr with a span distance of 2 Mtr the deflection should be within the limits as per standard. The cable ladder shall be supplied in standard length of 3000 mm. The rung size shall be of 30x15mm size suitable for fixing the cable clamps the space between the rungs shall be 300mm.
1000 mm Width x 100 mm Height
210
-
-
Supply and fixing of Perforated Cable tray with horizontal &vertical bends, reducers, Tees, cross over , suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanized for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The trays should be tested for a max. safe working load of 150 Kgs with a span distance of 1.5 meters and the deflection should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. The perforated tray shall be supplied with the standard length of 3 Mtr.
300 mm width x 60mm Height.
4200
-
-
Supply and fixing of Unperforated Cable tray /Ceiling Raceway with horizontal &vertical bends, reducers, Tees, cross over , suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanized for corrosion protection confirming to DIN EN 10346. The Ceiling Raceway shall be supplied with the standard length of 3 Mtr.
200 mm width x 60mm Height
150
-
-
Supply and fixing of Unperforated Cable tray /Ceiling Raceway with horizontal & vertical bends, reducers, Tees, cross over , suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanized for corrosion protection confirming to DIN EN 10346. The Ceiling Raceway shall be supplied with the standard length of 3 Mtr.
150 mm width x 60mm Height
175
-
-
Supply and fixing of Unperforated Cable tray /Ceiling Raceway with horizontal & vertical bends, reducers, Tees, cross over , suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanized for corrosion protection confirming to DIN EN 10346. The Ceiling Raceway shall be supplied with the standard length of 3 Mtr.
100 mm width x 60mm Height
200
-
-
Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories like cable divider, angles, couplers, cross, end caps etc.... conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
300
-
-
LIGHT FIXTURES
-
-
-
SITC of recess mounted 24W(+/- 10% Tolerance) 2x2 LED luminaire of CRCA powder coated housing,driver with minimum 4KV Surge protection, power factor 0.9,THD10%, rated life of 50,000 hours,system efficacy greater than or equal to 110 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed makes and including all necessary accessories as required for the light fixture should beprovided. Makes: Philips- RC380B LED30S-5700 G5 L60W60 PSU OD, Wipro-
CRCO10R024HP57HE
Note: Light fixtures complete with all necessary accessories including
suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
1447
-
-
SITC of recess mounted 31W(+/- 10% Tolerance) 2x2 LED luminaire of CRCA powder coated housing,driver with minimum 4KV Surge protection, power factor 0.9,THD10%, rated life of 50,000 hours,system efficacy greater than or equal to 110 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed makes and including all necessary accessories as required for the light fixture should be provided. Makes: Philips- RC380B LED36S-5700 G5 L60W60 PSU OD, Wipro-
CRCO10R030HP57HE
Note: Light fixtures complete with all necessary accessories including
suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the
engineer in charge). The installation shall be complete in all respects.
760
-
-
SITC of recess mounted 33W(+/- 10% Tolerance) 2x2 LED luminaire of CRCA powder coated housing,driver with minimum 4KV Surge protection, power factor 0.9,THD10%, rated life of 50,000 hours,system efficacy greater than or equal to 90 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed makes and including all necessary accessories as required for the light fixture should be provided.
Makes: Philips- RC740B LED30S/857 W60L60 PSU W, Wipro- LM29-451-XXX-57-XX
Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters,connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
45
-
-
SITC of recess mounted 2x2 LED Cleanroom fitting 40W(+/- 10% Tolerance) of CRCA powder coated housing, driver with minimum 4KV Surge protection, power factor 0.9,THD10%, rated life of 50,000 hours, system efficacy greater than or equal to 80 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed makes and including all necessary accessories as required for the light fixture should be provided. . Makes: Philips-CR652B LED33S CR CW CA, Wipro LC20-551-XXX-57-XX Recess mounted
Note: Light fixtures complete with all necessary accessories including suspenders, PVC
Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in
charge). The installation shall be complete in all respects.
152
-
-
SITC of recess mounted Downlights of 6W(+/- 10% Tolerance) LED luminaire of Die Cast Aluminium Housing, driver with minimum 4KV Surge protection, power factor 0.9,THD10%, rated life of 50,000 hours, system efficacy greater than or equal to 90 lm, with a CRI of 80 or above, ANSI rated LEDs from approved makes should be provided and including all necessary accessories as required for the light fixture. Makes: Philips- DN295B LED6S-6500 PSU WH, Wipro- CRDL11R008HP57
Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects
861
-
-
SITC of recess mounted Downlights of 18W(+/- 10% Tolerance) LED luminaire of Die Cast Aluminium Housing, driver with minimum 4KV Surge protection, power factor 0.9,THD10%, rated life of 50,000 hours, system efficacy greater than or equal to 90 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed makes and including all necessary accessories as required for the light fixture should be provided. . Makes: Philips- DN194B LED16S-6500 PSU WH S2, Wipro- CRDL11R023HP57
Note:
Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes,adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
2729
-
-
SITC of Surface mounted Downlights of 15W(+/- 10% Tolerance) LED luminaire of driver with minimum 4KV Surge protection, power factor 0.9,THD10%, rated life of 50,000 hours, system efficacy greater than or equal to 90 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed makes and including all necessary accessories as required for the light fixture should be provided. Makes: Philips- SM250C
LED16S- 6500 PSU WH, Wipro- LD81-131-XXX-60-SM
Note: Light fixtures complete with all necessary accessories including PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
45
-
-
SITC of LED TubeLights of 20W(+/- 10% Tolerance) with Aluminium Profile linear batten and
polycarbonate diffuser having driver of minimum 4KV Surge protection, power factor 0.9,THD10%, rated life of 50,000 hours, system efficacy greater than or equal to 90 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed makes and including all necessary accessories as required for the light fixture should be provided.Makes: Philips- BN308C LED20S-6500 L120 PSU WH, Wipro- LL24-251-XXX-57-XX
Note: Light fixtures complete with all necessary accessories including PVC Flexible pipes,adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
1646
-
-
SITC of LED Tube Lights of 40W(+/- 10% Tolerance) with Aluminium Profile linear batten and polycarbonate diffuser having driver of minimum 4KV Surge protection, power factor0.9,THD10%, rated life of 50,000 hours, system efficacy greater than or equal to 90 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed make and including all necessary accessories as required for the light fixture should be provided. Makes: Philips- BN308C LED40S-6500 L120 PSU WH, Wipro- LL24-541-XXX-57-XX
Note: Light fixtures complete with all necessary accessories including PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
97
-
-
SITC of LED Mirror Lights of 5W(+/- 10% Tolerance) with polycarbonate diffuser having driver of minimum 4KV Surge protection, power factor 0.9,THD10%, system efficacy greater than or equal to 80lm, ANSI rated LEDs from reputed makes should be provided and including all necessary accessories as required for the light fixture. (Test Reports for the above credentials shall be submitted and minimum 5 Year Warranty for the fixture should be provided by the contractor). Makes: Philips, Wip
Note: Light fixtures complete with all necessary accessories including PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
148
-
-
SITC of Bulkhead of 10W(+/- 10% Tolerance) with polycarbonate diffuser having driver of minimum 4KV Surge protection, power factor 0.9,THD10%, system efficacy greater than or equal to 80 lm, ANSI rated LEDs from reputed makes should be provided and including all necessary accessories as required for the light fixture. (Test Reports for the above credentials shall be submitted and minimum 5 Year Warranty for the fixture should be provided by the contractor). Makes: Philips, Wipro
Note: Light fixtures complete with all necessary accessories including PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
176
-
-
Supply, conveyance, installation, testing and commissioning of ceiling fans of the following sizes using standard accessories excluding resistance type regulator, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or with extended original wiring etc. as required. 1200mm sweep, energy efficient 5 Star rated, BLDC motor, regulator operating type, High Speed, high power factor above 0.95 including the down rod of length (upto 150 cm).
840
-
-
SITC of Suspended Aluminium Linear fixture 30W(+/- 10% Tolerance) LED luminaire of Extruded Aluminium Housing including suspension cable, driver with minimum 4KV Surge protection, power factor0.9,THD10%, rated life of 50,000 hours, system efficacy greater than or equal to 90 lm, with a CRI of 80 or above, ANSI rated LEDs from reputed makes and including all necessary accessories as required for the light fixture should be provided.Makes: Wipro- LM31-401-XXX-57WG1, Equivalent Philips fixture.
Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible
pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects.
40
-
-
Supply Installation Testing & commissioning of 400mm Sweep Wall fan including all the accessories as required.
110
-
-
EXTERNAL LIGHTING
-
-
-
90.15.3.8 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III double arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 8 Meters
10
-
-
90.15.3.7 : Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70 mm top diameter, 130 mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III single arm bracket 0.5mt including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc. complete 8 Meters
30
-
-
90.15.4.3 : Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
50
-
-
90.15.4.9 : Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)
8
-
-
SITC of 8W (+/-10% tolerance) IP/=65, Bollard LED luminaire having /= 500 lm system output (Luminaire lumen output) for landscape lighting. ANSI rated LEDs from reputed makes should be provided. Luminaire efficacy should be greater than or equal to 70 lumens/watt and with minimum 4 KV surge protection. Catalogue Number : Wipro , Philips. Note: Light fixtures complete with all necessary accessories including suspenders, PVC Flexible pipes, adopters, connectors etc as required (Sample shall be approved by the engineer in charge). The installation shall be complete in all respects
20
-
-
EARTHING
-
-
-
Supply and installation of Plate Earthing with 1200mmx1200mmx12mm CI plate (conforming to IS:3043-1987) complete with RCC inspection chamber of size 1000x600x500mm with RCC cover, GI class B pipe of 50 mm dia extending upto middle of the plate and clamping to the plate with GI clamps and bolts,funnel having 20G GI wire mesh, identification of earth pit with yellow paint below the chamber cover,mixtures of charcoal around electrode including digging of pit up to permanent moisture level but not less than 3 metre depth and back filling. (value of earth resistance should be less than 1 ohm
13
-
-
Providing maintenance free Earthing system as per IS 2309 ,IEC 62305 part3, IEC 60364, IEC 62561 part 2, IS 3043, UL 467 & UL 96 standards. Earthing System comprises of molecularly bonded copper of 99.9% purity on low carbon steel of 3 m length (1m (219 20 CU) x 3 nos), having a diameter of 20mm with copper coating thickness of 250 microns with self-coupling bore and peg arrangement (without the need for external coupler) with fault current withstand capability of 20 KA rms value for 1 second and I peak of 50 KA. For obtaining desired length, the number of rods shall be increased and is provided with Universal Clamp (2730 20 VA) made of SS 304 for clamping the cable/flat conductor to the rod. Impact point (219 20 IP) on the bottom rod for easy insertion. Earth enhancing mineral compound (ECS PB 12.5) is used for improving the soil conductivity. Earth enhancing mineral compound shall be so designed and constructed that in normal use their performance is reliable and without danger to persons and the surroundings. The material shall be mineral inert to sub soil and shall not pollute the environment. It shall provide a stable environment in terms of physical and chemical properties and exhibit low resistivity. It shall not be corrosive to the earth electrode itself. The material should have a resistivity less than 0.2 Ohm meter. It should be free from hazardous substances The mineral compound is required to have minimum 12.5 Kg of the total composite. Polypropylene & Polyethylene (UFE)Earth electrode inspection
chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 170mmx
170mmx 190mm with a weight bearing capacity of 5KN
17
-
-
Supply and laying the following sizes of Cu strips laid 0.6 m below ground level including excavating trench of suitable size and refilling ,including necessary clamps and bolts etc and all accessories as required for complete installation as instructed by engineer in charge/consultant.
50x10 Cu strips tinned at the point of contact.
240
-
-
Supply and laying the following sizes of Cu strips laid 0.6 m below ground level including excavating trench of suitable size and refilling ,including necessary clamps and bolts etc and all accessories as required for complete installation as instructed by engineer in charge/consultant.
32x6 Cu strips tinned at the point of contact.
45
-
-
Supply and laying the following sizes of Cu strips laid 0.6 m below ground level including excavating trench of suitable size and refilling ,including necessary clamps and bolts etc and all accessories as required for complete installation as instructed by engineer in charge/consultant.
25x6 Cu strips tinned at the point of contact.
200
-
-
Supply and laying the following sizes of Cu strips laid 0.6 m below ground level including excavating trench of suitable size and refilling ,including necessary clamps and bolts etc and all accessories as required for complete installation as instructed by engineer in charge/consultant.
25x3 Cu strips tinned at the point of contact
230
-
-
Supply and laying the following sizes of strips on cable tray or wall surface, including necessary clamps (each clamp not exceeding 60 cm) and bolts etc as required for complete installation as instructed by engineer in charge/consultant.
50x10 Cu strips tinned at the point of contact.
50
-
-
Supply and laying the following sizes of strips on cable tray or wall surface, including necessary clamps (each clamp not exceeding 60 cm) and bolts etc as required for complete installation as instructed by engineer in charge/consultant.
32x6 Cu strips tinned at the point of contact.
690
-
-
Supply and laying the following sizes of strips on cable tray or wall surface, including necessary clamps (each clamp not exceeding 60 cm) and bolts etc as required for complete installation as instructed by engineer in charge/consultant.
25x6 Cu strips tinned at the point of contact.
1580
-
-
Supply and laying the following sizes of strips on cable tray or wall surface, including necessary clamps (each clamp not exceeding 60 cm) and bolts etc as required for complete installation as instructed by engineer in charge/consultant.
25x3 Cu strips tinned at the point of contact.
3464
-
-
5.20 : Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
30
-
-
90.16.1.3 : Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
7500
-
-
LIGHTNING PROTECTION SYSTEMS
-
-
-
3 meter air terminal with accessories Providing and fixing Air terminals as per IEC -62305 part-3 and IS 2309 16mm rod tapered to 10 mm aluminum rod 3 meter rod:Meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IEC 62305) 101 VL 3000: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) Suitable for high wind load. System consist of Fang Fix with base and clamp on the top air terminal is erected.Fang fix clamp made of cable bracket, lightning tested for 100 KA 10/350 micro sec waveform. 2 nos of 16 KG stone of 365 mm diameter, high level of stability. Quick and easy mounting of interception rod using anchors. Concrete, frost-resistant, can be stacked.
44
-
-
8mm solid aluminum round conductor:
supply and providing 8mm solid aluminium round conductor, meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IEC 62305) RD 8/ALU: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) With 50 sq.mm cross sectional area. Polyamide Conductor holder with holding base for parapet/Flat roof-With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder.Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder @ 1 meter distance DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 60 CM distance for vertical run and 30 to 40 CM distance for horizontal run.
3420
-
-
8mm solid aluminum round conductor:
supply and providing 8mm solid aluminium round conductor, meets the technical specification according to DIN EN 50164-2 (VDE 0815 part 202). Meets the requirement of VDE0185/305(IEC 62305) RD 8/ALU: semi-hard (E-AlMgSiO5 corresponds to DIN 48801) With 50 sq.mm cross sectional area. Polyamide Conductor holder with holding base for parapet/Flat roof: With M8 female thread or diameter 7mm, M8 Screw to connect the conductor holder. Weather and temperature resistant from -35 to +90 degree Celsius tested. Conductor holder@ 1 meter distance DIN 48829 Form B1. Closed form with bottom. Filling weight 1Kg (frost-resistant concrete). Sleeve from polyethylene, black @ 1 meter distance.Horizontal run-Parapet application.
4110
-
-
5.8 : Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earthelectrode, including connection/ terminating with nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
750
-
-
Providing and fixing of Cross connector for Flat: Suitable for 30mm Galvanised steel strip. Installed with 4 nos of hexagonal plate.
480
-
-
Providing and fixing of cross universal connector: For T and cross connection, to route vertical down conductor /mesh formation made of hot dipped galvanised iron with necessary screws etc as required. Installed with 4 hexagonal bolts M8*25 with M8 hexagonal nuts .
180
-
-
Providing and fixing of expansion piece with connector: For equalising temperature related length changes. Necessary on conductors length over 20 meters. For round conductor Rd 8/ALU. Connectors:For T cross and parallel connectors. Quick installation using hexagonal bolt M10X30 high-grade hot dip galvanised. Conforms to the requirements according to DIN VDE 0185-305 (IS IEC62305)(2nos/expansion piece).
90
-
-
Providing and fixing of Equipotential bonding rail for outdoor use.
20
-
-
Providing and fixing of test joint suitable for 10mm dia copper coated solid steel round conductor with 100 microns of copper bonding (if pure copper conductor 25x3 mm solid tape also can be used) and 8mm dia solid round aluminium conductor made of stainless steel SS 304 grade. Conforms to the requirements according to (IS/IEC 62305).with an outdoor glass-fibre reinforced polycarbonate enclosure having minimum inner dimension of 75mm x 75 mm x 50 mm.
76
-
-
Providing of Plastic Corrosion Protection strip: Approx 1.1 mm thick. Width 50mm. Made of petrolatumcoated
chemical fibre fabric.
76
-
-
Providing maintenance free Earthing system as per IS 2309 ,IEC 62305 part3, IEC 60364, IEC 62561 part 2, IS 3043, UL 467 & UL 96 standards. Earthing System comprises of molecularly bonded copper of 99.9% purity on low carbon steel of 3 m length (1m (219 20 CU) x 3 nos), having a diameter of 20mm with copper coating thickness of 250 microns with self-coupling bore and peg arrangement (without the need for external coupler) with fault current withstand capability of 20 KA rms value for 1 second and I peak of 50 KA. For obtaining desired length, the number of rods shall be increased and is provided with Universal Clamp (2730 20 VA) made of SS 304 for clamping the cable/flat conductor to the rod. Impact point (219 20 IP) on the bottom rod for easy insertion. Earth enhancing mineral compound (ECS PB 12.5) is used for improving the soil conductivity. Earth enhancing mineral compound shall be so designed and constructed that in normal use their performance is reliable and without danger to persons and the surroundings. The material shall be mineral inert to sub soil and shall not pollute the environment. It shall provide a stable environment in terms of physical and chemical properties and exhibit low resistivity. It shall not be corrosive to the earth electrode itself. The material should have a resistivity less than 0.2 Ohm meter. It should be free from hazardous substances The mineral compound is required to have minimum 12.5 Kg of the total composite. Polypropylene & Polyethylene (UFE)Earth electrode inspection chamber with heavy duty cover should be used to cover the Earth Rod. The dimension shall be 170mmx170mmx 190mm with a weight bearing capacity of 5KN.
10
-
-
MISCELLANEOUS WORKS
-
-
-
Supply and providing 6 mm thick and 1 m wide electrical grade chequered type rubber mat to withstand 3.3 kV dielectric strength conforming to IS 5429/1969.
180
-
-
Supply and providing First Aid Box.
2
-
-
Supply and providing laminated First Aid chart duly framed and placed in a conspicuous location for clear vision.
2
-
-
Supply & fixing Approved Electrical Scheme/ Layouts printed in 6mm thick Transperent Acrylic sheet fixed with suitable SS Studs in walls as directed by Engineer in charge.
10
-
-
Supply and providing 6mm Thick MS chequered plate including cutting, welding, painting etc. as required for cable duct covering etc.
32
-
-
Supplying and installing at approved location approved make fire buckets of 24 gauge galvanized steel sheet, standard 9 litre capacity and of round bottom shape, painted white inside and red outside and black on the bottom, inscribed with letters “FIRE” in black and gold. Cost shall be inclusive of providing MS stand for 2 nos of fire buckes, or , duly painted over a coat of primer
2
-
-
Supply of 1 pair 11 KV rubber hand gloves of approved make.
2
-
-
2.22 : Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
4
-
-
2.21 : Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
8
-
-
Supply and providing 12 mm thick and 1 m wide electrical grade chequered type rubber mat to withstand 11 kV dielectric strength conforming to IS 5429/1969
40
-
-
DG,UPS,TRANSFORMER AND HT PANEL
-
-
-
1500KVA DIESEL GENERATOR
Supply, Installation, Testing & commissioning of 'Silent Type' Diesel Generating Sets along with acoustic enclosure having Prime Power Rating of 1500KVA at 1500 RPM 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 Phase system & for 0.85 Load factor (Detailed Technical Specification Attached)
1
-
-
1010KVA DIESEL GENERATOR
Supply, Installation, Testing & commissioning of 'Silent Type' Diesel Generating Sets along with acoustic enclosure having Prime Power Rating of 1010KVA at 1500 RPM 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 Phase system & for 0.85 Load factor (Detailed Technical Specification Attached)
1
-
-
500KVA DIESEL GENERATOR
Supply, Installation, Testing & commissioning of 'Silent Type' Diesel
Generating Sets along with acoustic enclosure having Prime Power Rating of 500KVA at 1500 RPM 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 Phase system & for 0.85 Load factor (Detailed Technical Specification Attached)
1
-
-
EXHAUST PIPES
Supplying and fixing exhaust gas piping of suitable dia, welded black M.S 'B' class pipe conforming to IS:3589 cut to required lengths and installed with all necessary MS bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral Wool/ Rockwool,50 mm thick wire mesh & aluminium cladding etc., as required as per specifications. suitable rain cap for top to avoid rain water entry. The distance between exhaust pipe at top and rain cap should be higher than diameter of pipe. Horizontal run of exhaust piping should slope downwards away from engine to the condensate trap. Silencer should be installed with drain plug at bottom. Fixing shall be done with proper clamps, expansion bolts, and all other accessories as instructed by the Engineer and the rate inclusive of all minor civil works required, bolts, clamps etc as required for installation. Support to exhaust piping should be done in such a manner that load of exhaust piping is not exerted to turbo charger and the vertical run of the pipes shall be provided with indirect supporting method so that when the pipes are hot and expanded they will be lifted into the supports. Exhaust pipe height shall be 3m more than the top of any adjacent building within 10m radius of the exhaust.
For 1500kVA DG
180
-
-
EXHAUST PIPES
Supplying and fixing exhaust gas piping of suitable dia, welded black M.S 'B' class pipe conforming to IS:3589 cut to required lengths and installed with all necessary MS bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral Wool/ Rockwool,50 mm thick wire mesh & aluminium cladding etc., as required as per specifications. suitable rain cap for top to avoid rain water entry. The distance between exhaust pipe at top and rain cap should be higher than diameter of pipe. Horizontal run of exhaust piping should slope downwards away from engine to the condensate trap. Silencer should be installed with drain plug at bottom. Fixing shall be done with proper clamps, expansion bolts, and all other accessories as instructed by the Engineer and the rate inclusive of all minor civil works required, bolts, clamps etc as required for installation. Support to exhaust piping should be done in such a manner that load of exhaust piping is not exerted to turbo charger and the vertical run of the pipes shall be provided with indirect supporting method so that when the pipes are hot and expanded they will be lifted into the supports. Exhaust pipe height shall be 3m more than the top of any adjacent building within 10m radius of the exhaust.
For 1000kVA DG
120
-
-
EXHAUST PIPES
Supplying and fixing exhaust gas piping of suitable dia, welded black M.S 'B' class pipe conforming to IS:3589 cut to required lengths and installed with all necessary MS bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral Wool/ Rockwool,50 mm thick wire mesh & aluminium cladding etc., as required as per specifications. suitable rain cap for top to avoid rain water entry. The distance between exhaust pipe at top and rain cap should be higher than diameter of pipe. Horizontal run of exhaust piping should slope downwards away from engine to the condensate trap. Silencer should be installed with drain plug at bottom. Fixing shall be done with proper clamps, expansion bolts, and all other accessories as instructed by the Engineer and the rate inclusive of all minor civil works required, bolts, clamps etc as required for installation. Support to exhaust piping should be done in such a manner that load of exhaust piping is not exerted to turbo charger and the vertical run of the pipes shall be provided with indirect supporting method so that when the pipes are hot and expanded they will be lifted into the supports. Exhaust pipe height shall be 3m more than the top of any adjacent building within 10m radius of the exhaust.
For 500kVA DG
60
-
-
3Nos. x 300KVA UPS
Supply, installation, and commissioning of 3 x 300 kW UPS three phase in and out with built in PRS configuration. with indoor (IP20) with surge protection system with 15 min backup battery @ 300 kW load Minumum VAH 216000 each UPS (SMF battery of reputed approved make), having individual battery bank with Input pf 0.99, Input THDi 3%, inbuilt isolation transformers at input side to have copper wound transformer output even in the bypass mode, with necessary battery circuit breaker, double conversion technology with input 400V, 50Hz three phase, output 400V, 50Hz three phase, SNMP card for network monitoring, BMS compatibility etc. It shall be 100% generator compatible, with Efficiency 94 % and output power factor Unity (300kVA = 300 kW), Eco mode Efficiency 99% and including all accessories etc as required. The acoustic noise at 1m of the system should be65dB.The system shall comply to IEC /EN 62040-1, EN/IEC 62040-2, EN/IEC 62040-3 and relevant IS standard along with PEP (LEED) certificates. The system shall be true online double - conversion DSP based UPS
system and also UPS shall be with automatic & manual bypass switch. The system shall have IGBT rectifier and inverter
1
-
-
2 Nos. x 20KVA UPS Supply, installation, and commissioning of 2 x 20 kVA UPS three phase in and out with built in PRS configuration with indoor (IP20) with surge protection system with 15 min backup battery @ each 20 kW load Minumum VAH 15600 each UPS (SMF battery of reputed approved make),having individual battery bank with Input pf 0.99, Input THDi 5%, inbuilt isolation transformers at input side to have copper wound transformer output even in the bypass mode, with necessary battery circuit breaker, double conversion technology with input 400V, 50Hz three phase, output 400V, 50Hz three phase, SNMP card for network monitoring, BMS compatibility etc. It shall be 100% generator compatible, with Efficiency 92 % and output power factor Unity (20kVA = 18 kW), Eco mode Efficiency 98% and including all accessories etc as required. The acoustic noise at 1m of the system should be60dB.The system shall comply to IEC /EN 62040-1, EN/IEC 62040-2, EN/IEC 62040-3 and relevant IS standard along with PEP (LEED) certificates. The system shall be true online double - conversion DSP based UPS system and also UPS shall be with automatic & manual bypass switch. The system shall have IGBT rectifier and inverter.
1
-
-
SITC of HT Panel : Supply, installation, testing and commissioning of dust and vermin proof floor mounted free standing cubicle type, 11kV, extensible panel board made out of 14 SWG thick CRCA sheet fully compartmentalised complete with hinged and earthed front doors interlocked with the earthswitch, comprising of one number of 630/800A VCB as incomer and four numbers of 630/800A VCB as outgoings as per the specification details below including providing station class polymeric type surge arrestor (10kA) for incomer with necessary switch for protection of same. Outgoings to be provided with over current + Earth fault relays with high set element, auto relays for door-interlock, provided with winding temperature alarm / trip etc. Each VCB panel also include POWER PACK/UPS of required capacity for auxiliary power supply unit with all accessories required for complete installation ias required and providing all connection and interconnections as required and as instructed by engineer in charge/consultant.
Incomer: 11kV 800A, 3phase 50Hz, 350MVA, breaking capacity vacuum circuit breaker dust and vermin proof totally enclosed in sheet steel housing, fully inter locked, horizontal drawout and horizontal isolation, indoor truck type with trip free spring closing mechanism with mechanical ON/OFF indicators, earthing terminals automatic safety shutters, complete with auxiliary contacts, resin cast CTs of suitable ratio and accuracy class for protection & metering - 2 Set
Bus Coupler: 11kV 800A, 3phase 50Hz, 350MVA, breaking capacity vacuum circuit breaker dust and vermin proof totally enclosed in sheet steel housing, fully interlocked, horizontal draw out and horizontal isolation, indoor truck type with trip free spring closing mechanism with mechanical ON/OFF indicators, earthing terminals automatic safety shutters, complete with all accessories required for complete installation - 1 Set
Outgoings: 11kV 800A, 3phase 50Hz, 350MVA, breaking capacity vacuum circuit breaker dust and vermin proof totally enclosed in sheet steel housing, fully interlocked, horizontal draw out and horizontal isolation, indoor truck type with trip free spring closing mechanism with mechanical ON/OFF indicators, earthing terminals automatic safety shutters, complete with auxiliary contacts, resin cast CTs of suitable ratio and accuracy class for protection - 4 Set
Drawout type resin cast P.T. with inbuilt fuses of ratio 11kV/110V must be provided (can be removed as only one voltage reference is required).Bus bar compartment shall have suitable capacity non-hygroscopic and high dielectric strength SMC/FRP busbar supports with electrolytic aluminium busbars covered with suitable sleeves. Metering compartment for each outgoing mounting digital meter and numerical relays for transformer protection, shunt/series trip coil, indication lamps, cable entry boxes, including all interconnections, providing fire/heat resistant coatings for busbar & CB truck enclosures and powder coated with approved colour complete panel as per IS-2516 & IS 3427 with latest amendments complete as required as instructed by engineer in charge/consultant. It shall also be provided with Instantaneous IDMT relay 2 O/C + 1 E/F relay CDAG-51 or Equivalent with high Set, Master Trip Relay. CT Rating : 50/1/1: Core 1: CL-0.5, Core 2: 5P10.
1
-
-
1600KVA - 11kV/433V Cast Resin (Dry type) Laser Scribed Transformer
Supply, installation, testing& commissioning of 1No. of 1600kVA 11kV/433V indoor cast resin dry type transformer with laser scribed core and copper winding, connected Delta on HT side and Star on LT side having a continuous rating for 11kV / 433V 3 phase 50 Hz. Vector group Dyn 11 with tappings from +5% to -10% in steps of 2.5 %,include separate winding temperature indicator for each phase and core in theTransformer. Insulation Class 'F'. Transformer should be directly connected to VCB by cable on HV side and have suitable adaptor box on LV side for connecting 2500A AL BBT, with all accessories, complete as required and losses as per ECBC + buildings, IE rules specifications. The transformer shall confirm to IS 2026,11171/1985 with latest amendment etc complete.
3
-
-
BUS DUCT AND RISING MAIN
-
-
-
Supply, installation, testing and commissioning of following capacity type tested as per IEC 61439 Part 6, pre-fabricated Class F Insulation, compact, Outdoor Sandwich type, (TPN) bus trunking system on wall /ceiling / structure, with high conductivity aluminium conductor in convenient sections suitable for 3 phase 4 wire 50Hz, 415V, AC supply. The bus bar shall be complete with bends, expansion joints, fire barriers at wall/ceiling crossing, copper flexible end connections, elbows. The housing shall be constructed from 1.6mm (min) thick electro galvanised sheet steel enclosure, IP65 with epoxy coated. The busduct shall be complete with 4 Nos aluminium busbar. Earthing with 2 runs of copper earth strip of size 25 x 5 mm (copper strip shall go inside LT panels and end termination boxes) on each side including clamping bracket, angle iron bracket, steel fasteners, connecting to earthing system etc as required, including supports for bus bars. The bus duct shall comply with IEC and BS standards. The routine test certificate as per IS / IEC and type test certificate of identical bus trunking shall be furnished. Rate shall be quoted for including bends, copper flexible, supports, hangers, flanged ends, adaptor box with terminal kits,necessary canopy with all accessories required for complete installation.
2500A, TPN, AL, 65 KA, IP-65 Feeder Busduct
125
-
-
Supply, installation, testing and commissioning of following capacity type tested as per IEC 61439 Part 6,pre-fabricated Class F insulation, compact, Indoor Sandwich type (TPN) bus trunking system on wall /ceiling / structure with high conductivity aluminium conductor in convenient sections suitable for 3 phase 4 wire 50Hz, 415V, AC supply. The bus bar shall be complete with expansion joints, fire barriers at each floor crossing, copper flexible end connections. end cap etc . The housing shall be constructed from 1.6mm (min) thick electro galvanised sheet steel enclosure, IP54 with epoxy coated. The busduct shall be complete with 4 nos aluminium busbar. Earthing with 2 runs of copper earth strip of size 25 x 5 mm on each side including clamping bracket, angle iron bracket, steel fastners, connecting to earthing system etc as required, including supports for bus bars. The rising mains shall comply with IEC and BS standards. The routine test certificate as per IS / IEC and type test certificate of identical rising mains shall be furnished including all accesories required for complete installation.
2500A, TPN, AL, 65 KA, IP-54 Feeder Busduct
135
-
-
Supply, installation, testing and commissioning of following capacity type tested as per IEC 61439 Part 6,pre-fabricated Class F Insulation, compact, Outdoor Sandwich type, (TPN) bus trunking system on wall /ceiling / structure, with high conductivity aluminium conductor in convenient sections suitable for 3 phase 4 wire 50Hz, 415V, AC supply. The bus bar shall be complete with bends, expansion joints, fire barriers at wall/ceiling crossing, copper flexible end connections, elbows. The housing shall be constructed from 1.6mm (min) thick electro galvanised sheet steel enclosure, IP-65 with epoxy coated. The busduct shall be complete with 4 Nos aluminium busbar. Earthing with 2 runs of copper earth strip of size 25 x 5 mm (copper strip shall go inside LT panels and end termination boxes) on each side including clamping bracket, angle iron bracket, steel fasteners, connecting to earthing system etc as required, including supports for bus bars. The bus duct shall comply with IEC and BS standards. The routine test certificate as per IS / IEC and type test certificate of identical bus trunking shall be furnished. Rate shall be quoted for including bends, copper flexible, supports, hangers, flanged ends, adaptor box with terminal kits,necessary canopy with all accessories required for complete installation.
1600A, TPN, AL, 50 KA, IP-65 Feeder Busduct.
60
-
-
Supply, installation, testing and commissioning of following capacity type tested as per IEC 61439 Part 6,pre-fabricated Class F insulation, compact, Indoor Sandwich type (TPN) bus trunking system on wall /ceiling / structure with high conductivity aluminium conductor in convenient sections suitable for 3 phase 4 wire 50Hz, 415V, AC supply. The bus bar shall be complete with expansion joints, fire barriers at each floor crossing, copper flexible end connections. end cap etc . The housing shall be constructed from 1.6mm (min) thick electro galvanised sheet steel enclosure, IP54 with epoxy coated. The busduct shall be complete with 4 nos aluminium busbar. Earthing with 2 runs of copper earth strip of size 25 x 5 mm on each side including clamping bracket, angle iron bracket, steel fastners, connecting to earthing system etc as required, including supports for bus bars. The rising mains shall comply with IEC and BS standards. The routine test certificate as per IS / IEC and type test certificate of identical rising mains shall be furnished including all accessories required for complete installation.
1600A, TPN, AL, 50KA, IP-54 Feeder Busduct.
150
-
-
Supply, installation, testing and commissioning of following capacity type tested as per IEC 61439 Part 6, pre-fabricated Class F insulation, compact, Indoor Sandwich type (TPN) Rising Mains on wall with high conductivity aluminium conductor in convenient sections suitable for 3 phase 4 wire 50Hz, 415V, AC supply. The bus bar shall be complete with expansion joints, fire barriers at each floor crossing, copper flexible end connections. end cap etc . The housing shall be constructed from 1.6mm (min) thick electro galvanised sheet steel enclosure, IP54 with epoxy coated. The busduct shall be complete with 4 nos aluminium busbar. Earthing with 2 runs of copper earth strip of size 25 x 5 mm on each side including clamping bracket, angle iron bracket, steel fastners, connecting to earthing system etc as required,including supports for bus bars. The rising mains shall comply with IEC and BS standards. The routine test certificate as per IS / IEC and type test certificate of identical rising mains shall be furnished including all accessories required for complete installation.
1250A, TPN, AL, 50KA, IP54 Rising Mains
420
-
-
Supply, installation, testing and commissioning of following capacity type tested as per IEC 61439 Part 6,pre-fabricated Class F insulation, compact, Indoor Sandwich type (TPN) Rising Mains on wall with high conductivity aluminium conductor in convenient sections suitable for 3 phase 4 wire 50Hz, 415V, AC supply. The bus bar shall be complete with expansion joints, fire barriers at each floor crossing, copper flexible end connections. end cap etc . The housing shall be constructed from 1.6mm (min) thick electro galvanised sheet steel enclosure, IP54 with epoxy coated. The busduct shall be complete with 4 nos aluminium busbar. Earthing with 2 runs of copper earth strip of size 25 x 5 mm on each side including clamping bracket, angle iron bracket, steel fastners, connecting to earthing system etc as required,including supports for bus bars. The rising mains shall comply with IEC and BS standards. The routine test certificate as per IS / IEC and type test certificate of identical rising mains shall be furnished including all accessories required for complete installation.
800A, TPN, AL, 50KA, IP54 Rising Mains
20
-
-
Supplying, installing, connecting to existing Compact Type bus trunking/ rising mains, testing and commissioning of following capacity tap off Unit for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure IP54 duly powder coated with MCCB complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required. 630 amps 36KA FP MCCB Thermal Magnetic in Tap off box
4
-
-
Supplying, installing, connecting to existing Compact Type bus trunking/ rising mains, testing and commissioning of following capacity tap off Unit for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure IP 54 duly powder coated with MCCB complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required
320 amps 36KA FP MCCB Thermal Magnetic in Tap off box
16
-
-
Supplying, installing, connecting to existing Compact Type bus trunking/ rising mains, testing and commissioning of following capacity tap off Unit for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure IP 54 duly powder coated with MCCB complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required 250 amps FP MCCB Thermal Magnetic in Tap off box
24
-
-
Supplying, installing, connecting to existing Compact Type bus trunking/ rising mains, testing and commissioning of following capacity tap off Unit for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure IP 54 duly powder coated with MCCB complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required 200 amps FP MCCB Thermal Magnetic in Tap off box
20
-
-
Supplying, installing, connecting to existing Compact Type bus trunking/ rising mains, testing and commissioning of following capacity tap off Unit for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure IP 54 duly powder coated with MCCB complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required 160 amps 25KA FP MCCB Thermal Magnetic in Tap off box.
4
-
-
Supplying, installing, connecting to existing Compact Type bus trunking/ rising mains, testing and commissioning of following capacity tap off Unit for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply made with 1.6mm thick steel sheet enclosure IP 54 duly powder coated with MCCB complete with necessary joints including clamping brackets, angle iron bracket, steel fasteners, connecting to earthing system etc. as required 125 amps 25KA FP MCCB Thermal Magnetic in Tap off box
4
-
-
PANEL BOARDS
-
-
-
4F BLOCK-F UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,
removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout
provided.
Incomer : 200A, FP, 25kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
200A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
63 A, 16kA, TP+NL, TM MCCB - 2 Nos.
32 A, 16kA, TP+NL, TM MCCB - 10 Nos.
1
-
-
4F BLOCK-D UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 100A, FP, 16kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,
Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
100A 433V, 16kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as
required. Necessary interlocking arrangement
Out Goings :
40 A, 10kA, TP+NL, TM MCCB -1 No.
32 A, 10kA, TP+NL, TM MCCB - 5 Nos.
1
-
-
4F BLOCK-B UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 100A, FP, 16kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
100A 433V, 16kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings 63 A, 10kA, TP+NL, TM MCCB - 3Nos.
40 A, 10kA, TP+NL, TM MCCB
1
-
-
4F BLOCK-A UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 125A, FP, 16kA, TM Based MCCB - 1 Set
Multi function digital LED meters
with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,
Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
125A 433V, 16kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as
required. Necessary interlocking arrangement
Out Goings :63 A, 10kA, TP+NL, TM MCCB - 2Nos.
40 A, 10kA, TP+NL, TM MCCB - 3 Nos.
1
-
-
4F UPS PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 630A, FP, 36kA, TM Based MCCB + 630A, FP ATS - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No.
630A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
200 A, 25kA, TP+NL, TM MCCB - 2 Nos.
125 A, 16kA, TP+NL, TM MCCB - 2 Nos
100 A,16kA, TP+NL, TM MCCB - 1 No.
32 A, 16kA, TP+NL, TM MCCB - 2 Nos
1
-
-
3F BLOCK -D UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided."
Incomer : 100A, FP, 16kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
100A 433V, 16kA bestconductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as
required. Necessary interlocking arrangement
Out Goings :
40 A, 10kA, TP+NL, TM MCCB - 6Nos.
1
-
-
3F BLOCK - A UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 160A, FP, 25kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,
Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
160A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as
required. Necessary interlocking arrangement
Out Goings :
40 A, 10kA, TP+NL, TM MCCB - 2 Nos.
32 A, 10kA, TP+NL, TM MCCB - 7 Nos.
1
-
-
3F BLOCK -B UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,
removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 100A, FP, 16kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,
Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set RYB phase indicating LED lamps with control fuses and switches - 1 set.
100A 433V, 16kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.
Necessary interlocking arrangement
Out Goings :
63 A, 10kA, TP+NL, TM MCCB - 2 Nos.
40A, 10kA, TP+NL, TM MCCB - 2 Nos.
1
-
-
3F UPS PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided."
Incomer : 320A, FP, 36kA, TM Based MCCB + 320A, FP ATS - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1
No.
320A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat
shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
160 A, 25kA, TP+NL, TM MCCB - 1 No.
100 A, 16kA, TP+NL, TM MCCB - 3 Nos.
40 A,16kA, TP+NL, TM MCCB - 2 Nos.
32 A, 16kA, TP+NL, TM MCCB - 2 Nos.
1
-
-
2F BLOCK F UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,
removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout
provided.
Incomer : 160A, FP, 25kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,
Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
160A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
63 A, 10kA, TP+NL, TM MCCB - 2Nos.
40 A, 10kA, TP+NL, TM MCCB - 2 Nos.
32 A, 10kA, TP+NL, TM MCCB - 3 Nos
1
-
-
2F BLOCK B UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 125A, FP, 16kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
125A 433V, 16kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
63 A, 16kA, TP+NL, TM MCCB - 2 Nos.
32 A, 16kA, TP+NL, TM MCCB - 3 Nos
1
-
-
2F UPS PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 320A, FP, 36kA, TM Based MCCB + 320A, FP ATS - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :
Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
320A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat
shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Busbar: 1 Set TPN
Al bus bars suitably rated for 320A 25KA
Out Goings :
125 A, 25kA, TP+NL, TM MCCB - 1 No.
100 A, 16kA, TP+NL, TM MCCB - 1 No.
63 A, 16kA, TP+NL, TM MCCB - 2 Nos.
40 A,16kA, TP+NL, TM MCCB - 2 Nos.
32 A, 16kA, TP+NL, TM MCCB - 2 Nos
1
-
-
1F BLOCK D UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 100A, FP, 16kA, TM Based MCCB - 1 SetMulti function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
100A 433V, 16kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
32 A, 10kA, TP+NL, TM MCCB - 6 Nos.
1
-
-
1F BLOCK B UPS PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 125A, FP, 16kA, TM Based MCCB - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
125A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.
Necessary interlocking arrangement
Out Goings :
40 A, 10kA, TP+NL, TM MCCB - 5 Nos.
1
-
-
1F UPS PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layoutprovided.
Incomer : 320A, FP, 36kA, TM Based MCCB + 125A, FP ATS - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No.
320A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
125 A, 16kA, TP+NL, TM MCCB - 2 Nos.
100 A, 16kA, TP+NL, TM MCCB - 1 No.
63 A,16kA, TP+NL, TM MCCB - 3 Nos.
32 A, 16kA, TP+NL, TM MCCB - 3 Nos.
1
-
-
GF UPS PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 125A, FP, 25kA, TM Based MCCB + 125A, FP ATS - 1 Set
Multi functiondigital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
125A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:32 A, 16kA, TP+NL, TM MCCB - 8 Nos.
1
-
-
LG1 UPS PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 200A, FP, 25kA, TM Based MCCB + 200A, FP ATS - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :
Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No. 200A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat
shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
100 A, 16kA, TP+NL, TM MCCB - 2 Nos.
40 A, 16kA, TP+NL, TM MCCB - 4 Nos.
32 A,16kA, TP+NL, TM MCCB - 3 Nos.
1
-
-
4F PANEL - BLOCK DEF
Fabrication, supply, erection, testing and commissioning of TTA PANEL,
Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided."
Incomer : 200A, FP, 36kA, TM Based MCCB + 200A, FP ATS - 1 Set Multi function
digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :
Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No.
200A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:100 A, 25kA, TP+NL, TM MCCB - 2 Nos.
63 A, 25kA, TP+NL, TM MCCB - 2 Nos.
40 A,25kA, TP+NL, TM MCCB - 2 Nos.
32 A, 25kA, TP+NL, TM MCCB - 2 Nos
1
-
-
3F PANEL - BLOCK DEF
Fabrication, supply, erection, testing and commissioning of TTA PANEL,Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of
14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 250A, FP, 36kA, TM Based MCCB + 250A, FP ATS - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :
Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No.
250A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
100 A, 25kA, TP+NL, TM MCCB - 3 Nos.
63 A, 25kA, TP+NL, TM MCCB - 2 Nos.
40 A,25kA, TP+NL, TM MCCB - 1 No.
32 A, 25kA, TP+NL, TM MCCB - 1 No.
1
-
-
2F PANEL - BLOCK F
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick
CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 200A, FP, 25kA, TM Based MCCB - 1 No Multi function digital LED meterswith accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phaseindicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
200A 433V, 25kA bestconductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
63 A, 16kA, TP+NL, TM MCCB - 2
Nos.
40 A, 16kA, TP+NL, TM MCCB - 3 Nos.
32 A, 16kA, TP+NL, TM MCCB - 1 No.
1
-
-
2F PANEL -BLOCK DEF
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of
14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 320A, FP, 36kA, TM Based MCCB + 320A, FP ATS - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :
Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No.
320A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat
shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
160 A, 25kA, TP+NL, TM MCCB - 2 Nos.
100 A, 25kA, TP+NL, TM MCCB - 2 Nos.
63 A,25kA, TP+NL, TM MCCB - 2 Nos.
32 A, 25kA, TP+NL, TM MCCB - 1 No.
1
-
-
1F PANEL - BLOCK DEF
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of
14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 250A, FP, 36kA, TM Based MCCB + 250A, FP ATS - 1 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No.
250A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
100 A, 25kA, TP+NL, TM MCCB - 4 Nos.
63 A, 25kA, TP+NL, TM MCCB - 3 Nos.
32 A,25kA, TP+NL, TM MCCB - 1 No.
1
-
-
GF PANEL - BLOCK DEF
Fabrication, supply, erection, testing and commissioning of TTA PANEL,Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of
14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.
Providing all connections and interconnections as required and providing all assecories as required for
complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout
provided.
Incomer : 200A, FP, 36kA, TM Based MCCB + 200A, FP ATS - 1 Set
Multi functiondigital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1
Set
RYB phase indicating LED lamps with control fuses and switches - 1 set
Surge Arrester :Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No.
200A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat
shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
100 A, 25kA, TP+NL, TM MCCB - 1 No.
63 A, 25kA, TP+NL, TM MCCB - 4 Nos.
32 A,25kA, TP+NL, TM MCCB - 2 Nos.
1
-
-
LG1 PANEL - BLOCK DEF
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of
14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 160A, FP, 36kA, TM Based MCCB + 160A, FP ATS - 1 Set
Multi function
digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester :Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1No.
160A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings:
63 A, 25kA, TP+NL, TM MCCB - 3 Nos.
40 A, 25kA, TP+NL, TM MCCB - 3 Nos.
32 A,25kA, TP+NL, TM MCCB - 2 Nos.
1
-
-
4F SMDB 11 -BLOCK B
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 6 way Load Bank of approved make IP43 with cable end box, meter module including suitable rated Busbar, neutral link and DIN bar with all accessories etc complete. Providing all connections & interconnections as required, all assecories as required for complete installation as instructed by engineer in charge and as shown in the schematic layout provided.
Incomer - 125A 25KA, FP TM MCCB - 1 No.
125 A 415V 25kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Prewired meter module including all meters and indicating lamps - 1 Set Cable alley - 2 Set
Class B+C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
Out Goings : 63 A, 16KA, TP+NL TM MCCB - 3Nos.
40A, 16KA, TP+NL TM MCCB - 2 Nos.
32 A, 16KA, TP+NL TM MCCB - 1 No.
1
-
-
4F SMDB 10 - BLOCK ABC
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 8 way Load Bank of approved make IP43 with cable end box, meter module
including suitable rated Busbar, neutral link and DIN bar with all accessories etc complete. Providing all connections & interconnections as required, all assecories as required for complete installation as instructed by engineer in charge and as shown in the schematic layout provided.
Incomer - 250A, 36KA, FP TM MCCB - 1 No.
250 A 415V 36kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Class B+C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
Outgoings
100A, 25kA, TP+NL, TM MCCB - 3Nos.
63A, 25kA, TP+NL, TM MCCB - 4 Nos.
32A, 25kA, TP+NL, TM MCCB - 1 No
1
-
-
3F SMDB 9 -BLOCK ABC
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 8 way Load Bank of approved make IP43 with cable end box, meter module including suitable rated Busbar, neutral link and DIN bar with all accessories etc complete. Providing all connections & interconnections as required, all assecories as required for complete installation as instructed by engineer in charge and as shown in the schematic layout provided.
Incomer - 250A 36KA, FP TM MCCB - 1 No.
250 A 415V 36kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. <br>Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Class B+C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
Outgoings
100A, 25kA, TP+NL, TM MCCB - 2 Nos.
63A, 25kA, TP+NL, TM MCCB - 4 Nos.
32A, 25kA, TP+NL, TM MCCB - 2 Nos
1
-
-
2F SMDB 8 - BLOCK F
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 6 way Load Bank of approved make IP43 with cable end box, meter module including suitable rated Busbar, neutral link and DIN bar with all accessories etc complete. Providing all connections & interconnections as required, all assecories as required for complete installation as instructed by engineer in charge and as shown in the schematic layout provided.
Incomer - 125A 25KA, FP TM MCCB - 1 No.
125 A 415V 25kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Class B+C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No
Out Goings :
63 A, TP+NL, 16kA, MCCB - 4 Nos.
32 A, TP+NL, 16kA, MCB - 2 Nos.
1
-
-
2F SMDB 7 - BLOCK ABC
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 8 way Load Bank of approved make IP43 with cable end box, meter module including suitable rated Busbar, neutral link and DIN bar with all accessories etc complete. Providing all connections &interconnections as required, all assecories as required for complete installation as instructed by engineer in charge and as shown in the schematic layout provided.
Incomer - 250A 36KA, FP TM MCCB - 1 No
250 A 415V 36kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. <br>Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Class B+C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
Out Goings :
100A, TP+NL, 25kA, TM MCCB - 3 Nos.
63A, TP+NL, 25kA, TM MCCB - 3 Nos
32A, TP+NL, 25kA, TM MCCB - 2 Nos.
1
-
-
SM DB 06 1F - BLOCK B
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 6 way Load Bank of approved make IP43 with cable end box, meter module including suitable rated Busbar, neutral link and DIN bar with all accessories etc complete. Providing all connections &interconnections as required, all assecories as required for complete installation as instructed by engineer in charge and as shown in the schematic layout provided.
Incomer - 125A 25KA, FP TM MCCB - 1 No.
125 A 415V 25kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Outgoings
63A, 16KA TP+NL, TM MCCB - 2 Nos
40A, 16KA TP+NL, TM MCB - 3 Nos.
32A,16KA TP+NL, TM MCB - 1 Nos.
1
-
-
SM DB 05-1F -BLOCK ABC
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 8 way Load Bank of approved make IP43 with cable end box, meter module including suitable rated Busbar, neutral link and DIN bar with all accessories etc complete. Providing all connections &interconnections as required, all assecories as required for complete installation as instructed by engineer in charge and as shown in the schematic layout provided.
Incomer - 250A 36KA, FP TM MCCB - 1 No.
250 A 415V 36kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.
Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Class B+C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No
Outgoings
125A, 25kA, TP+NL, TM MCCB - 2 Nos.
100A, 25kA, TP+NL, TM MCCB - 2 Nos.
32A, 25kA, TP+NL, TM MCCB - 4 Nos
1
-
-
SM DB 4 - GF - BLOCK A
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 6 way Load Bank of approved make IP43 and quality with cable end box, meter module including Busbar, neutral link and DIN bar with all accessories etc complete with all connections and inter-connections as shown in the schematic drawing, Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant.
Incomer - 125 A, 25KA, FP, TM MCCB - 1 No
125A 415V 25kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.
Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Out Goings :
40A, 16kA, TP+NL, TM MCCB - 5 Nos
32A, 16kA, TP+NL, TM MCCB - 1 No.
1
-
-
SM DB 3 -GF -BLOCK ABC
Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 8 way Load Bank of approved make IP43 and quality with cable end box, meter module including Busbar, neutral link and DIN bar with all accessories etc complete with all connections and inter-connections as shown in the schematic drawing, Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant.
Incomer - 200A, 36KA, FP TM MCCB - 1 No.
200A 415V 36kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.
Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Class B+C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
Out Goings :
100A, 25kA, TP+NL,TM MCCB - 3 Nos.
63A, 25kA, TP+NL, TM MCCB - 2 Nos.
32A, 25kA, TP+NL, TM MCCB -3 Nos.
1
-
-
SM DB 2 (LG1) - BLOCK B Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 6 way Load Bank of approved make IP43 and quality with cable end box, meter module including Busbar, neutral link and DIN bar with all accessories etc complete with all connections and inter-connections as shown in the schematic drawing, Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant.
Incomer - 125 A, 25KA, FP TM MCCB - 1 No.
125 A 415V 25kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Out Goings :
63A, 16kA, TP+NL,TM MCCB - 1 No.
40A, 16kA, TP+NL,TM MCCB - 3 No.
32A, 16kA, TP+NL,TM MCCB - 2 No
1
-
-
SM DB1 (LG1) - BLOCK ABC Supply, erection, testing and commissioning of wall mounting type, double door 3 phase 8 way Load Bank of approved make IP43 and quality with cable end box, meter module including Busbar, neutral link and DIN bar with all accessories etc complete with all connections and inter-connections as shown in the schematic drawing, Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant.
Incomer - 250A 36kA, FP, TM MCCB - 1 Set.
250 A 415V 36kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Prewired meter module including all meters and indicating lamps - 1 Set
Cable alley - 2 Set
Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
Outgoings
125A, 25kA, TP+NL, TM MCCB - 1 No.
100A, 25kA, TP+NL, TM MCCB - 3 Nos.
63A, 25kA, TP+NL, TM MCCB - 1 No.
32A, 25kA, TP+NL, TM MCCB - 3 Nos.
Supply, Installation, testing and commissioning
1
-
-
UPS OUTPUT PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 630A, FP, 36kA, Microprocessor Based MCCB - 4 Nos.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 3 Set
RYB phase indicating LED lamps with control fuses and switches - 3 set.
630A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
600 A 50 kA, FP Microprocessor Based ACB - 3 Nos
1
-
-
EXTERNAL LIGHTING PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, Wall/floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 100A, FP, MCCB Isolator - 1 No
100A FP Contactor with Auto Time Switch - 1 Set
Surge Arrester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
100A 433V, 16kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangemen
Out going :
25 TP MCB - 10 Nos
1
-
-
LIFT SUB PANEL - 3.1, 3.2, 3.3
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, Wall/floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 160A, FP, MCCB Isolator - 1 No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
160A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
63A, 100 mA 4P RCBO - 3 Nos.
16A, FP MCB - 2 Nos.
3
-
-
FIRE LIFT PANEL (01-06)
Fabrication, supply, erection, testing and commissioning of TTA Panel, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 63A, FP, MCCB Isolator - 1 No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
63A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
63 A , 100 mA FP RCBO - 1 No.
25 A, 30 mA DP RCBO - 1 No.
25A 433V, 16kA best conductivity extensible Al SPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
6A, SP, MCB - 4 No
6
-
-
LG2- SUB PANEL
Fabrication, supply, erection, testing and commissioning of TTA Panel, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 320A, FP, 36kA, Microprocessor Based MCCB - 1 No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set
Surge Arrester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
320A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out going :
200A TP+NL,TM MCCB ,Ics 25 kA -1 Nos
125A TP+NL,TM MCCB ,Ics 16 kA - 2 Nos
63A TP+NL,TM MCCB ,Ics 16 kA - 5 Nos
40A TP+NL,TM MCCB ,Ics 16 kA -3 Nos
1
-
-
LG3-FLOOR PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, Wall/floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 125A, FP, 25kA, Thermal Magnetic Based MCCB - 1 No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
125A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out going 63A TP+NL, TM MCCB, Ics 16 kA - 6 Nos
1
-
-
AHU PANEL - TEERACE
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 630A, FP, 36kA, Microprocessor Based MCCB - 1 No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
630A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out going :
200A TP+NL,TM MCCB ,Ics 25 kA - 4 Nos
160A TP+NL,TM MCCB ,Ics 25 kA - 2 Nos
125A TP+NL,TM MCCB ,Ics 16 kA - 2 Nos
100A TP+NL,TM MCCB ,Ics 16 kA - 1 No.
25A TP+NL,TM MCCB, Ics 16 kA - 1 No.
1
-
-
EMERGENCY LIGHTING PANEL
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, Wall/floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 100A, FP, 25kA, Microprocessor Based MCCB with electrical interlock - 2 Set
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 2 Set
RYB phase indicating LED lamps with control fuses and switches - 2 set
Surge Arrester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
100A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
40A, TP, MCB - 10 Nos
1
-
-
EMERGENCY LIFT PANEL
Fabrication, supply, erection, testing and commissioning of TTA Panels, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 250A, FP, 25KA, Thermal Magnetic Based MCCB - 1 No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
250A 433V, 25kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :80A, TP+NL,16kA, TM, MCCB - 7 Nos.
1
-
-
CSSD PANEL:
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, Wall/floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 320A, FP, 36KA, Thermal Magnetic Based MCCB - 1 No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester : Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
320A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out Goings :
100A, TP+NL, TM, 25kA, MCCB - 4 Nos.
63A, TP+NL,TM, 25kA, MCCB - 3 Nos.
1
-
-
LIFT PANEL-03
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, Wall/floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 320A FP MCCB Isolator - 1No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
320A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as
required. Necessary interlocking arrangement
Out Goings :
160A TP+NL,TM MCCB - 3 Nos.
100A TP+NL,TM MCCB - 1 No.
1
-
-
LIFT PANEL - 01 & 02
Fabrication, supply, erection, testing and commissioning of Indoor Cubicle Type, dust and vermin proof, Wall/floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 200A FP MCCB Isolator - 1No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arester Class B + C / Class 1 + 2 Surge arrestor
device with necessary MCB for back-up protection - 1 No
200A 433V, 36kA best conductivity
extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required.
Necessary interlocking arrangement
Out Goings :
63A , 100 mA FP RCBO - 3 Nos.
16A,FP MCB - 3 No.
2
-
-
UTILITY PANEL 03
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 800A 50kA FP Microprocessor Based ACB - 1No Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.Surge Arrester Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.800A 433V, 50kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out going :
630A TP+NL,TM MCCB ,Ics 36 kA - 1 No.
320A TP+NL,TM MCCB ,Ics 36 kA - 1 No
200A TP+NL,TM MCCB ,Ics 36 kA - 1 No
160A TP+NL,TM MCCB ,Ics 36 kA - 1 No
125A TP+NL,TM MCCB ,Ics 36 kA - 1 No
1
-
-
POWER LAUNDRY PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 250A 36kA FP Thermal Magnetic Based MCCB - 1No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
250A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out going :100A, TP+NL, MP, MCCB, Ics 25 kA - 4 Nos
63A, TP+NL, MP, MCCB, Ics 25 kA - 1 No
50A, TP+NL, MP, MCCB, Ics 25 kA - 1 No
1
-
-
AC SUB PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 630A 36kA FP Thermal Magnetic Based MCCB - 1No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
630A 433V,36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc
complete as required. Necessary interlocking arrangement
Out going :
320A TP+NL, MP MCCB,Ics 36 kA -3 Nos
1
-
-
EMERGENCY PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL,Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of
14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 400A 36kA FP Thermal Magnetic Based MCCB - 1No
Multi function digitalLED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current,Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester Class B + C /Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
400A 433V,36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Busbar: 1 Set TPN AL bus bars suitably rated for 400A 36KA
Out Goings :
250A, 25KA TM TP+NL MCCB - 1 No.
125A, 25KA TM
TP+NL MCCB - 1 No.
80A, 25KA TM TP+NL MCCB - 2 Nos.
63A, 25KA TM TP+NL MCCB - 2Nos.
1
-
-
MEDICAL GAS PLANT PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 500A 25kA FP Thermal Magnetic Based MCCB - 1No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester
Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
500A 433V, 50kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out going
100A TP+NL,TM MCCB ,Ics 16 kA - 3 Nos
63A TP+NL,TM MCCB ,Ics 16 kA - 3 Nos
40ATP+NL,TM MCCB ,Ics 16 kA - 2 Nos
1
-
-
PLUMBING PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 315A MCCB Isolator - 1 No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set. 315A 433V, 36kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Surge Arrester Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
Out Goings :
125 A 25 kA,TM TP+NL MCCB - 2 no.
63 A 25kA,TM TP+NL MCCB - 2 no.
32 A 25 kA,TM TP+NL MCCB - 9 no
1
-
-
MAIN UPS INPUT PANEL
Fabrication, supply, erection, testing and commissioning of TTA PANEL,Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of
14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 1600A 50kA FP EDO MP ACB with electrical interlock - 2 No
Multi function
digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage,
current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 2 Set
RYB phase indicating LED lamps with control fuses and switches - 2 set.
1600A 433V, 50kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as
required. Necessary interlocking arrangement
Out going :
630A, FP, MP, MCCB, Ics 36 kA - 4Nos
1
-
-
MEDICAL EQP PANEL-1
Fabrication, supply, erection, testing and commissioning of TTA PANEL,Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of
14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 800A 50kA FP EDO MP ACB - 1No
Multi function digital LED meters
with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,
Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester Class B + C / Class 1 +2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
800A 433V, 50kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as
required. Necessary interlocking arrangement
Out going :
320A TP+NL,TM MCCB ,Ics 36 kA -2Nos
250A TP+NL,TM MCCB ,Ics 36 kA -2 Nos
160A TP+NL,TM MCCB ,Ics 36 kA -2 Nos
1
-
-
UTILITY PANEL-2
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets,removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 1600A 50kA FP EDO MP ACB. - 1No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1 Set
RYB phase indicating LED lamps with control fuses and switches - 1 set.
Surge Arrester Class B + C / Class 1 + 2 Surge
arrestor device with necessary MCB for back-up protection - 1 No.
1600A 433V, 50kA best
conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as
required. Necessary interlocking arrangement
Out going :
800A FP, EDO, MP ACB,Ics 50 kA - 2No
320A TP+NL,TM MCCB ,Ics 36 kA - 3 Nos
200A TP+NL,TM MCCB ,Ics 36 kA - 3 Nos
1
-
-
UTILITY PANEL-1
Fabrication, supply, erection, testing and commissioning of TTA PANEL, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomer : 1600A 50kA FP EDO MP ACB. - 1No
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh - 1Set
RYB phase indicating LED lamps with control fuses and switches - 1set.
Surge Arrester Class B + C / Class 1 + 2 Surge arrestor device with necessary MCB for back-up protection - 1 No.
1600A 433V, 50kA best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Out going :
630A TP+NL,TM MCCB ,Ics 36 kA -1 No
500A TP+NL,TM MCCB ,Ics 36 kA -1 No
400A TP+NL,TM MCCB ,Ics 36 kA - 1 No
320A TP+NL,TM MCCB ,Ics 36 kA -1 No
250A TP+NL,TM MCCB ,Ics 36 kA -1 No
200A TP+NL,TM MCCB ,Ics 36 kA - 2 No
400A TPN MCCB Isolator - 2 Nos
1
-
-
APFC PANEL- 300KVAR
Supply erection, testing and commissioning of 14 SWG freestanding indoor cubicle, type tested automatic power factor control panel of rating 300 kVAr with 7% harmonic copper
reactor with de-tuned capacitors using capacitor duty contactor switching. By using Microprocessor based relay operated controller which should be capable to switch on the required kVAr for compensation based on cyclic switching. 630A 50kA 4P MCCB with high rupturing capacity and in built overload and short circuit releases as per specifications as incomer, housing capacitors with Ultra heavy duty all polypropylene as a dielectric with Over current withstand 3 times rated current and ambient temperature of 65 degree Celsius continuous in steps of 12 (50 kVAr X 2), (25 kVAr X 6), (20 kVAr X 1) & (10 kVAr X 3). CT Sensing shall be taken from HT side. Required rating of capacitor shall be directly connected to the main bus for no load compensation as per transformer manufacturer specification if CT sensing are provided at LT side.
The capacitors shall be with pressure sensitive interrupter, inside hermetically sealed metal cans. with terminal bushings to withstand 10 KV AC to ground with treated terminals and capacitor cells shall be provided with discharge resistors to reduce residual voltage 50Vwithin one min of de-Energisation. All controls shall be mounted on enclosure door with door interlocks. Heavy duty capacitor duty contactors with high rupturing MCB shall be used for individual stage control. Metering:Digital Multi Function Meter (DMFM) , Push Button, R Y B Indication with control fuse -1Set, Auto manual selector switch- 1No, Forced cooling using fans, APFC relay - 1 no. including all connections and interconnections, all accessories as required for complete installation as instructed by engineer in charge.
6
-
-
DG SYNCH PANEL
Fabrication, supply, erection, testing and commissioning of TTA as per IEC 61439 and internal arc test as per IEC 61641, Indoor Cubicle Type, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fullycompartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. Providing all connections and interconnections as required and providing all assecories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided.
Incomers
DG Incomer 1 & 2 -2500A, 75 kA TP EDO Microprocessor based ACB with thermal O/L, voltage controlled O/C relay, over
voltage, under voltage, negative sequence, low set stand by earth fault relays and ref/differential relaywith fuel shutoff facilities + 630A Contactor for neutral and earth - 2 Set
DG Incomer 3 - 1600A, 65 kA
TP EDO Microprocessor based ACB with thermal O/L, voltage controlled O/C relay, over voltage, under voltage, negative sequence, low set stand by earth fault relays and ref/differential relay with fuel shutoff facilities + 250A Contactor for neutral and earth - 1 Set
DG Incomer 4 - 800A, 65 kA TP EDO
Microprocessor based ACB with thermal O/L, voltage controlled O/C relay, over voltage, under voltage,negative sequence, low set stand by earth fault relays and ref/differential relay with fuel shutoff facilities +100A Contactor for neutral and earth - 1 Set
6300A 415V, 75 kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, Current, Frequency, kW, KVA, kVAr, kWh, kVAh, kVArh, PF, Runhr,Onhr, Interrupts, Phase angle, THD, Neutral current, Max Demand (with RTC), Events (high-low) with time stamp, Individual Harmonics upto 31st, Meter with Ethernet port - 4 Set
Supply, erection, testing & commissioning of PLC based synchronising system for 4 Nos DG set with PLC and Synchronization Relay Deif - 4 Nos, including necessary SMPS, AUX contactor or Relay, Relay Module, DIN Rail,Selector Switch, Push Button, Terminal, Indication lamp, Legs, End plate, Stopper, 1.5 Ferule, Screw,Neutral link, control cabling using 2.5 Sqmm wire, Cable tie, Tie mount and all other accessories and components as required for complete installation and as instructed by engineer in charge/consultant.
RYB phase indicating LED lamps with control fuses and switches - 4 set.
6300A, FP, 95 kA Microprocessor based Bus coupler - 2 Nos
Outgoings
2500A, 75kA,FP, EDO Microprocessor Based ACB - 4 Nos
Supply, Installation, testing and commissioning
1
-
-
MAIN SWITCH BOARD
Fabrication, supply, erection, testing and commissioning of TTA type, Indoor Cubicle , dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised as per Form 4B Construction complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel for cable end termination including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable.Providing all connections and interconnections as required and providing all accessories as required for complete installation as instructed by engineer in charge/consultant and as shown in the schematic layout provided. The panel shall be with PLC components for interlocking of incoming breakers & bus couplers, UPS for PLC and all connections and interconnections required for PLC Logic Operations for interlocking of breakers as indicated in schematic.
EB Incomer 1, 2 & 3 - 2500A, 75kA, FP, EDO Microprocessor based ACB with 3 O/C and 1 E/F releases. Standby low set E/F relay with CT at neutral earthing strip, REF relay with primary trip. - 3 Set.
DG Feeder 1, 2 & 3 - 2500A, 75kA, FP, EDO Microprocessor based ACB - 3 Sets.
6300A 415V, 75kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, Current, Frequency, kW, KVA, kVAr, kWh, kVAh, kVArh, PF, Runhr,Onhr, Interrupts, Phase angle, THD, Neutral current, Max Demand (with RTC),Events (high-low) with time stamp, Individual Harmonics upto 31st, Meter with Ethernet port - 6 Sets
RYB phase indicating LED lamps with control fuses and switches - 6 set.
Class B & Class C/ Class 1 & Class 2 Surge arrestor device with necessary HRC Fuse for back-up protection - 3 Buscoupler: 6300A, FP, 95 kA, EDO,
Microprocessor based ACB - 2 No
Out going:
1600A,50kA FP Microprocessor Based, EDO ACB- 4 Nos.
1250A,50kA FP Microprocessor Based, EDO ACB -5 Nos.
1000A,50kA FP Microprocessor Based, EDO ACB -2 Nos.
800A,50kA FP Microprocessor Based, EDO ACB - 5 Nos.
630A,50kA FP Microprocessor Based MCCB - 10 Nos.
1
-
-
Extra Low Voltage System
DATA
-
-
-
Information Outlet RJ 45 - Supply, fixing, fluke testing and commissioning of CAT6 Information Outlets (Key stone) with Shuttered Faceplate, Single port, white, jack, suitable PVC / GI Modular Box etc. in recess / surface mounted including necessary connections with all accessories required for complete installation as directed by the Engineer in charge.
891
-
-
Information Outlet RJ 45 - Supply, fixing, fluke testing and commissioning of CAT 6A Information Outlets (Key stone) with Shuttered Faceplate, Single port, white, jack, suitable PVC / GI Modular Box etc. in recess / surface mounted including necessary connections with all accessories required for complete installation as directed by the Engineer in charge.
76
-
-
CAT6 Cable - Supplying and drawing of Category 6 cable consists of 4 pairs of solid insulated copper 23AWG, surface/ recessed medium class PVC conduit through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
57688
-
-
CAT 6A Cable - Supplying and drawing of Category 6A cable consists of 4 pairs of solid insulated copper 23AWG, surface/ recessed medium class PVC conduit through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
4914
-
-
OFC Cable - Supplying and drawing of 6 core SM armoured Optical Fibre Cable (OFC) through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
2916
-
-
Patch Cable - User Side - Supply, fixing, testing and commissioning of CAT6 Patch Cable - 2 Meter length etc. of approved make as required for complete installation.
891
-
-
Patch Cable - Hub Side - Supply, fixing, testing and commissioning of CAT6 Patch Cable - 1 Meter of approved make as required for complete installation.
891
-
-
Patch Cable - Hub Side - Supply, fixing, testing and commissioning of Fibre Patch Cable - 2 Meter of approved make as required for complete installation.
60
-
-
VOICE
-
-
-
Information Outlet RJ 11 - Supply, fixing, testing and commissioning of RJ11 Information Outlets (Key stone) with shuttered Faceplate, single port, white, jack, suitable PVC / GI Modular Box etc. in recess / surface mounted including necessary connections with all accessories required for complete installation as directed by the Engineer in charge.
393
-
-
Supplying and drawing of following pair telephone cable consists of 0.5 mm dia FR, PVC Compound annealed copper conductor, unarmored telephone cable in surface / recessed medium class FRLS PVC conduit through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation. 2 Pair Telephone Cable
27118
-
-
Cable - Supplying and laying of following pair armoured telephone cable through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation. 10 Pair Telephone Cable
566
-
-
Cable - Supplying and laying of following pair armoured telephone cable through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.20 Pair Telephone Cable
520
-
-
Cable - Supplying and laying of following pair armoured telephone cable through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation. 50 Pair Telephone Cable
182
-
-
Cable - Supplying and laying of following pair armoured telephone cable through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.100 Pair Telephone Cable
150
-
-
krone Box - Supply, erection, testing and commissioning of following pair krone Box with mounting frame, enclosure of ISI grade with lockable front cover with all accessories required for fixing the box with all accessories required for complete installation in wall as directed by the Engineer in charge.10pair
11
-
-
krone Box - Supply, erection, testing and commissioning of following pair krone Box with mounting frame, enclosure of ISI grade with lockable front cover with all accessories required for fixing the box with all accessories required for complete installation in wall as directed by the Engineer in charge.20pair
11
-
-
krone Box - Supply, erection, testing and commissioning of following pair krone Box with mounting frame, enclosure of ISI grade with lockable front cover with all accessories required for fixing the box with all accessories required for complete installation in wall as directed by the Engineer in charge.50pair
3
-
-
krone Box - Supply, erection, testing and commissioning of following pair krone Box with mounting frame, enclosure of ISI grade with lockable front cover with all accessories required for fixing the box with all accessories required for complete installation in wall as directed by the Engineer in charge.100pair
1
-
-
krone Box - Supply, erection, testing and commissioning of following pair krone Box with mounting frame, enclosure of ISI grade with lockable front cover with all accessories required for fixing the box with all accessories required for complete installation in wall as directed by the Engineer in charge.400 Pair MDF Krone
1
-
-
Supply, Installation, Testing and Commissioning of PBX with 393 Analog extensions expandable up to 500, 20 SIP/ IP licence with minimum of 20 concurrent calls, 1 PRI interface, 4 analogue trunk lines, Failover Function, Web Interface, Call Dashboard, DISA, IVR, Call Hunt etc. including two numbers master console phone & short key / Direct Station Selection (DSS) Console. The system should be compactible to communicate with other PBX through communication server.
Built-In Auto Answer, TDM/IP Coverage, ISDN Compatibility, Voice Mail Integration, Paging Announcement
Programmable Function Keys
Call Waiting
1
-
-
Supply, installation, testing and commissioning of Basic user phone with necessary connection as required for complete installation as directed by the engineer in charge.
393
-
-
Surge Protection Device For EPABX: Supply, Installation, Testing and commissioning of SPD with enclosure, the surge protection device shall be suitable to protect telephone lines designed to with stand both lightning current and switching surges. Technology: GD tube, Nominal Voltage: 180 V, Pulsed Current (10/350 µs ) Iimp: 1 KA, Nominal Discharge Current (8/20 µs )/phase In: 5KA, Maximum discharge current: 10 KA,Voltage Protection Level(sym)700V, Response time1n sec
1
-
-
CLOSED CIRCUIT TELIVISION (CCTV)
-
-
-
Camera for General Area - Dome - Supply, Installation, testing and commissioning of IP based 3.6 mm fixed lens, 2MP resolution, H.264 / H.265, 1/2.8" Progressive Scan CMOS Day/Night, IR dome POE enabled camera, 20 to 30 meters IR range, 120 dB digital WDR with all connectors and necessary accessories for mounting in false ceiling as required for complete installation as directed by Engineer in charge.
166
-
-
Camera for Lift - Dome - Supply, Installation, testing and commissioning of IP based 2.8 mm fixed lens, 2MP resolution, H.264 / H.265, 1/2.8" Progressive Scan CMOS Day/Night, IR dome POE enabled camera, 20 to 30 meters IR range, 120 dB digital WDR with all connectors and necessary accessories for mounting in false ceiling as required for complete installation as directed by Engineer in charge. PoE (Power over Ethernet).
18
-
-
Camera for Corridor - Dome - Supply, Installation, testing and commissioning of IP based 2.8/3.6 mm to 9/12 mm verifocal lens, 2MP resolution, H.264 / H.265, 1/2.8" Progressive Scan CMOS Day/Night, IR dome POE enabled camera, 20 to 30 meters IR range, 120 dB digital WDR with all connectors and necessary accessories for mounting in false ceiling as required for complete installation as directed by Engineer in charge. PoE (Power over Ethernet).
132
-
-
Camera - Bullet - Supply, Installation,testing and commissioning of Varifocal Bullet Camera with 2 MP, H.264 / H.265, built-in IR LED, 2.8/3.6 mm to 9/12 mm, 20 to 30 meters IR range, IP 66 with all connectors and necessary accessories for mounting in false ceiling/True Ceiling as required for complete installation as directed by Engineer in charge. PoE (Power over Ethernet).
24
-
-
Network Video Recorder with Storage: Supply, installation, testing and commissioning of Channel Network Video Recorder with Recording Storage space server for 30 days, Supports 64 channels 720 P resolution video recording at real time, NVR ONVIF supporting, Recording resolution of Max 4 MP, should support dual video HDMI output, H.265,H.264 at real time. Video storage expansion for recording for complete installation with all accessories as required and directed by engineer in charge. (Consider the sufficient HDDs for 720p @ 20 FPS for 30 days continues recording for all channels). Storage calculation details shall be submitted.
6
-
-
LED Display - Supply, installation, testing and commissioning of 43 inch full HD LED display for video wall arrangement for 24 x 7 Setup including necessary connection, HDMI cable, rating tray etc. as required for complete installation with all accessories as required and directed by engineer in charge.
4
-
-
CAT6 Cable - Supplying and drawing of Category 6 cable consists of 4 pairs of solid insulated copper 23AWG, surface/ recessed medium class PVC conduit through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
36678
-
-
Supply, installation, testing and commissioning of workstation with Intel I5 or above, 4 GB ram, 4 GB Graphics Card and 2 TB HDD with video management software (VMS) for CCTV integration
2
-
-
PUBLIC ADDRESSING SYSTEM (PAS)
-
-
-
Ceiling Mounted Speaker - Supply, fixing, testing and commissioning of ceiling mount Metal Grille Speakers with inbuilt line matching transformer with power 6W with required accessories for installation as required.
768
-
-
Wall Mounted Speaker - Supply, fixing, testing and commissioning of Cabinet Speakers with inbuilt line matching transformer with power 12W with a volume controller to adjust the volume individually as per the requirement with all accessories for complete installation as required. The volume controller shall be fixed separately as per the site condition for individual control. Cost inclusive of necessary interconnection including conduit, connection wire etc required for complete installation.
164
-
-
Mixing Amplifier - Supply, fixing, testing and commissioning of 240 Watts Mixer Amplifier with necessary jacks and cable for connections and interconnection with all accessories required for installation as required.
1
-
-
Power Amplifier - Supply, fixing, testing and commissioning of Power Amplifier of 240 Watts with necessary jacks and cable for connections and interconnection with all accessories required for installation as required.
6
-
-
Power Amplifier - Supply, fixing, testing and commissioning of Power Amplifier of 480 Watts with necessary jacks and cable for connections and interconnection with all accessories required for installation as required.
8
-
-
Controller - Supply, fixing, testing and commissioning of Master zone controller with routing zone capcity of additional 6 zones with all accessories and necessary connections including necessary cables and jacks as required for complete installation. The work also include integration with Fire Alarm System (FAS) including to play the pre-recorded message in case of fire and evacuation.
1
-
-
Call Stations - Supply, fixing, testing and commissioning of 6 Zone Calling Station with mic as per the drawing as required for complete installation.
1
-
-
Audio/Video player - Supply, installation, testing & commissioning of Audio/Video player with USB option with all accessories like jacks and codes for complete installation as required as directed by the Engineer in charge.
1
-
-
Speaker Cable - Supplying and drawing of 2 Core, Twin Twisted, ATC tinned copper, overall sheathed, Armoured Speaker cable, 16 AWG for speakers through surface / Tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
23450
-
-
ACCESS CONTROL SYSTEM (ACS)
-
-
-
Supply, Installation, Testing & Commissioning of IP Based 2 Door Controller with minimum 2 Readers, 8 inputs, and 4 Relay outputs with enclosure, power supply and all the necessary accessories.
6
-
-
Supply, Installation, Testing & commissioning of proximity card readers.
6
-
-
Supply of Access Cards
2
-
-
Supply, fixing, fluke testing and commissioning of exit switch with Faceplate, suitable PVC / GI Modular Back Box etc. in recess / surface mounted including necessary connections with all accessories required for complete installation as directed by the Engineer in charge.
6
-
-
Supply, Installation, Testing & commissioning of 600 lbs single door EM Lock with all necessary accessories.
6
-
-
Supply, fixing, fluke testing and commissioning of break glass with Faceplate, suitable PVC / GI Modular Back Box etc. in recess / surface mounted including necessary connections with all accessories required for complete installation as directed by the Engineer in charge.
6
-
-
Supply, Installation, Testing & Commissioning of Access control system Software for managing access control system
1
-
-
Supplying and drawing of 4C X 1Sqmm Multistranded copper cable for Controller to EM Lock through surface / recessed medium class PVC conduit through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
120
-
-
Supplying and drawing of 8C X 1Sqmm Multistranded Copper Cable for Controller to Reader through surface / recessed medium class PVC conduit through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
120
-
-
Supplying and drawing of 2C X 1Sqmm Multistranded Copper Cable for Controller to Exit Switch through surface / recessed medium class PVC conduit through wall/tray with all accessories as required for complete installation and as instructed by engineer in charge/consultant and making good all damages made for installation.
240
-
-
ACTIVE COMPONENTS, RACKS & ACCESSORIES
-
-
-
Supply, Installation, Testing and commissioning of Cat - 6, shuttered type, 24 port fully loaded patch panel with necessary cable manager for routing the cable inside rack with all accessories required for complete installation as required as directed by the engineer in charge.
60
-
-
Supply, Installation, Testing and commissioning of Cat - 6, 24 port 10/100/1000 Mbps, layer 2, POE, switch with rack mounting brackets, input connector shall be as per IEC-320-C14 with all accessories required for complete installation populated with 1G single SFP module for uplink as required as directed by the engineer in charge. The switch should be capable to provide sufficient power budget to IP cameras as per the requirement.
60
-
-
Supply, Installation, Testing and commissioning of 6 port Light Interface Unit (LIU) / Fibre Patch Panel, rack mountable with mounting brackets, loaded with Adaptors, Couplers Single Mode (SM) pigtails with splicing with all accessories required for complete installation as required as directed by the engineer in charge.
7
-
-
Supply, Installation, Testing and commissioning of 12 port Light Interface Unit (LIU) / Fibre Patch Panel, rack mountable with mounting brackets, loaded with Adaptors, Couplers Single Mode (SM) pigtails with splicing with all accessories required for complete installation as required as directed by the engineer in charge.
14
-
-
Supply, Installation, Testing and commissioning of 24 port Light Interface Unit (LIU) / Fibre Patch Panel, rack mountable with mounting brackets, loaded with Adaptors, Couplers Single Mode (SM) pigtails with splicing with all accessories required for complete installation as required as directed by the engineer in charge.
5
-
-
Supply, Installation, Testing and commissioning of Cat - 6, 24 port Layer 3 Managable Core switch with rack mounting brackets, input connector shall be as per IEC-320-C14 with all accessories required for complete installation populated with 1G single SFP module as required as directed by the engineer in charge.
3
-
-
Supply, installation, testing and commissioing of 4U Rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 4U mounting angles, top, bottom open, RAL 9005, including necessary exhaust/circulation fan with all accessories required for complete installation as directed by the engineer in charge.
2
-
-
Supply, installation, testing and commissioing of 6U Rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 6U mounting angles, top, bottom open, RAL 9005, including necessary exhaust / circulation fan with all accessories required for complete installation as directed by the engineer in charge.
4
-
-
Supply, installation, testing and commissioing of 9U Rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 9U mounting angles, top, bottom open, RAL 9005, including necessary exhaust / circulation fan with all other accessories required for complete installation as directed by the engineer in charge.
1
-
-
Supply, installation, testing and commissioing of 12U Rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 12U mounting angles, top, bottom open, RAL 9005, including necessary exhaust / circulation fan with all other accessories required for complete installation as directed by the engineer in charge.
2
-
-
Supply, installation, testing and commissioing of 16U Rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 16U mounting angles, top, bottom open, RAL 9005, including necessary exhaust / circulation fan with all other accessories required for complete installation as directed by the engineer in charge.
8
-
-
Supply, installation, testing and commissioing of 24U Rack with Front glass door, Rear Perforated door with handle Lock & key. Front/Rear 24U mounting angles, top, bottom open, RAL 9005, including necessary exhaust / circulation fan with all other accessories required for complete installation as directed by the engineer in charge.
2
-
-
Supply, installation, testing and commissioing of 42U Rack DK_PS frame with Front glass door, Rear Perforated door with handle Lock & key, castors. Side and rear panels, Front / Rear 42U 800W X 1000D MM mounting angles, top, bottom open, RAL 9005, including necessary exhaust / circulation fan with all other accessories required for complete installation as directed by the engineer in charge.
2
-
-
Supply and fixing of Perforated Cable tray with horizontal & vertical bends, reducers, Tee's, cross over, suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The trays should be tested for a max. safe working load of 150 Kgs with a span distance of 1.5 meters and the deflection should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. The perforated tray shall be supplied with the standard length of 3 Mtr (For Data, Voice, CCTV & PA).100 mm width x 60mm Height
792
-
-
Supply and fixing of Perforated Cable tray with horizontal & vertical bends, reducers, Tee's, cross over, suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The trays should be tested for a max. safe working load of 150 Kgs with a span distance of 1.5 meters and the deflection should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. The perforated tray shall be supplied with the standard length of 3 Mtr (For Data, Voice, CCTV & PA).150 mm width x 60mm Height
1019
-
-
Supply and fixing of Perforated Cable tray with horizontal & vertical bends, reducers, Tee's, cross over, suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The trays should be tested for a max. safe working load of 150 Kgs with a span distance of 1.5 meters and the deflection should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. The perforated tray shall be supplied with the standard length of 3 Mtr (For Data, Voice, CCTV & PA).200 mm width x 60mm Height
453
-
-
Supply and fixing of Perforated Cable tray with horizontal & vertical bends, reducers, Tee's, cross over, suitable supports and brackets and other accessories as required confirming to IEC-61537. The Tray shall be galvanised for corrosion protection confirming to DIN EN 10346 / ISO 1461 .The trays should be tested for a max. safe working load of 150 Kgs with a span distance of 1.5 meters and the deflection should be within the limits as per standard. The safety factor shall be 1.7 times of the safe working load. The perforated tray shall be supplied with the standard length of 3 Mtr (For Data, Voice, CCTV & PA).250 mm width x 60mm Height
493
-
-
Fire Protection & Life Safety System
PUMPS PANELS AND ACCESSORIES
-
-
-
MAIN PUMP - ELECTRICAL;MAIN PUMP - Supply, installation, testing and commissioning of Horizontal long coupled End Suction Fire Hydrant Pump Set: Electrical Driven, Capacity: 2280 LPM at 85 Meter Head, conforming to IS 1520, with Bronze Impeller, SS. Shaft, Mechanical Seal, High Efficient IE-3 rated, Squirrel Cage Induction Electric Motor, Suitable HP, 3Ph, 50 Hz, suitable RPM as per manufacturer recommendation, TEFC, complete with necessary concrete foundation duly plastered, MS fabricated common base plate with foundation bolts, compound gauge, water re-circulation arrangement, pressure relief valve, anti-vibration mounts, as per requirement and necessary earthing of Electric Motors, etc. all as per the Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions;
2
-
-
SPRINKLER PUMP - ELECTRICAL;Supply, installation, testing and commissioning of Horizontal long coupled End Suction Fire Sprinkler Pump Set: Electrical Driven, Capacity: 2280 LPM at 85 Meter Head, conforming to IS 1520, with Bronze Impeller, SS. Shaft, Mechanical Seal, High Efficient IE-3 rated, Squirrel Cage Induction Electric Motor, Suitable HP, 3Ph, 50 Hz, suitable RPM as per manufacturer recommendation, TEFC, complete with necessary concrete foundation duly plastered, MS fabricated common base plate with foundation bolts, compound gauge, water re-circulation arrangement, pressure relief valve, anti-vibration mounts, as per requirement and necessary earthing of Electric Motors, etc. all as per the Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions.
2
-
-
MOTOR CONTROL PANEL - Fabrication, supply, erection, testing and commissioning of cubicle type, dust and vermin proof, floor mounted, front operated Common Control Panels for Main Fire Pumps & Jockey Pumps, made out of 14 SWG thick CRCA sheet fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates (top entry) made out of 3mm thick sheet steel including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. The panel shall be IP: 54 protection, complete with Main Isolator, Bus Bar Chamber, Volt Meter, Ammeter, Individual Star- Delta Starters for Main Pumps, DOL Starter for Jockey Pump, Contactors, Auxiliary Contacts, Timers for automatic operation and to avoid frequent re-starts, Indicating Lamps, Fuses, Auto / Manual Selector Switches for all Fire Pumps, Manual On / Off Buttons for Jockey Pump & Manual On Buttons for Main Pumps, all internal wiring etc. The price for Control Panel shall be inclusive of Control Cabling in Steel Conduits for automatic starting of Main Pumps & Automatic start and stop for Jockey Pump and Earthing of the Panel all as per Technical Specifications, Schematic Drawing, Prevailing Rules, Standards, Requirement and Site Conditions. The Panel shall be the approval of Kerala State Electrical Inspectorate. Control for Diesel Engine comprising: Auto/Manual selector switch and 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode indication lamp for High/Low Lub. Oil pressure, High Water Temp. and Engine ON indication Battery Charger suitable for 12/24V DC with boost and tickle selector switch,0-30 V DC volt meter, 0-20A DC Ammeter. All standard relays and accessories for automatic operation of diesel engine.Incomer - 400A, TPN ISOLATOR - 1No. 400A, 415V, 36 kA best conductivity Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, Current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh,Class B + C / Class 1 + 2 Surge arrestor device with necessary MCCB for protection of same - 1 Set. RYB phase indicating LED lamps with control fuses and switches - 1 set.Outgoing 200A TPN ISOLATOR + Star delta starter with all accessories without overload relays / protection - 2 Set, 25-63A TP+NL MCCB Isolator + fully automatic DOL Starter with all accessories with overload relay, single phase preventer &under voltage protection- 2 Set. Supply, Installation, Testing & Commissioning.
2
-
-
JOCKEY PUMP Supply, installation, testing and commissioning of Jockey Pump: Electrical Driven, Capacity: 180 LPM at 91 meters. Head, Vertical Multi Stage Inline Pump with S.S Impeller, Mechanical Seal, and with High Efficient IE-3 Rated Squirrel Gauge Induction Motor, Suitable HP, 3Ph, 50 Hz, suitable RPM as per manufacturer recommendation, TEFC, complete with necessary concrete foundation duly plastered, MS fabricated common base plate with foundation bolts, compound gauge, water recirculation arrangement, pressure relief valve, anti-vibration mounts, as per requirement and necessary earthing of Electric Motors, etc. all as per the Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions.
4
-
-
DIESEL PUMP Supply, installation, testing and commissioning of Stand By / Back Up Fire Pump, Horizontal long coupled, End Suction Pump, Engine Driven, suitable for Automatic operation and consisting of the following and complete in all respect as required; Capacity: 2280 LPM at 85 Meter Head conforming to IS 1520, with Bronze Impeller, SS. Shaft, Mechanical Seal, coupled to High Efficient Radiator Cooled Diesel Engine, Suitable HP, suitable RPM as per manufacturer recommendation, and with Control Panel with Auto Starting Facility, by activation of concerned Pressure Switch and thro. 12V/24 V Electric Starter, Battery of adequate rating and with Battery Charger, Battery Leads, Diesel Tank for 6 hrs operation, exhaust pipe extended up to 1 mtr outside pump house, duly insulated with 50<br>mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per specification, complete with necessary civil foundation, foundation bolts, compound gauge, water re-circulation arrangement, pressure relief valve, and all other necessary fixing accessories, all as per Technical Specifications.
2
-
-
EXHAUST PIPES -Supplying and fixing exhaust gas piping of suitable dia matching the Diesel Fire pump, Medium Class GI pipe confirming to IS:1239 cut to required lengths and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with mineral Wool/ Rockwool,50 mm thick wire mesh; aluminium cladding etc., as required as per specifications. suitable rain cap for top to avoid rain water entry. The distance between exhaust pipe at top and rain cap should be higher than diameter of pipe. Horizontal run of exhaust piping should slope downwards away from engine to the condensate trap. Silencer should be installed with drain plug at bottom. Fixing shall be done with proper clamps, expansion bolts, and all other accessories as instructed by the Engineer and the rate inclusive of all minor civil works required, bolts, clamps etc as required for installation. Support to exhaust piping should be done in such a manner that load of exhaust piping is not exerted to engine and the vertical run of the pipes shall be provided with indirect supporting method so that when the pipes are hot and expanded they will be lifted into the supports. Exhaust pipe height shall be 3m more than the top of any adjacent building within 10m radius of the exhaust.The rates shall be inclusive of all MS supports.The exhaust pipe height shall be more than the top of any adjacent building within 10 m radius of the exhaust as warranted by CPCB norms.
120
-
-
POWER CABLING
-
-
-
Supply and Laying of below sized XLPE insulated PVC sheathed Aluminium conductor armoured cabling to the incoming and outgoing of fire pump panel including necessary connections etc. 3.5C X 95 Sq mm.
60
-
-
Supply and Laying of below sized XLPE insulated PVC sheathed Aluminium conductor armoured cabling to the incoming and outgoing of fire pump panel including necessary connections etc. 4C x 10 sq mm.
60
-
-
9.1.24 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 95 sq. mm (45mm)
4
-
-
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
4
-
-
AIR CUSHION VESSEL
-
-
-
AIR CUSHION VESSEL :Supplying, Installation, Testing & Commissioning of air cushion tank (air vessel) of continuous welded construction, fabricated out of at least 8mm thick steel with dished ends, and supporting legs, Capable of carrying 15Bar Pressure, 250mm dia & 1200mm high complete with necessary air release valve, safety valve, pressure gauge, flange connection to the wet riser piping with necessary piping to meet the functional requirement of the system.
2
-
-
AIR RELEASE VALVE
-
-
-
AIR RELEASE VALVE;Supply, installation, testing and commissioning of Air Release Valve Gunmetal, conforming to IS 903:1993, having rubber ball with sealing seat and with 25mm. BSP threaded male inlet, including necessary accessories and connections.
22
-
-
PRESSURE GAUGE
-
-
-
PRESSURE GAUGE ;Supply installation testing and commissioning of 4" dia. Pressure Gauge, with ISI Mark or of equivalent International Standards. Weather / Water Proof, Type with gunmetal /brass shut off cock.
7
-
-
PRESSURE SWITCH
-
-
-
PRESSURE SWITCH ;Supply, installation, testing and commissioning of industrial type pressure switch having 1/4" BSP(F) connection IP:32 enclosure protection, phosphor bronze bellows as sensing element, SDPT contact system, switch rating 6A Inductive/10A resistive 380 V AC, 0.2A Inductive/10A resistive 250V DC etc. complete as required.
7
-
-
ALARM CHECK VALVE
-
-
-
ALARM CHECK VALVE ;Supply, installation, testing and commissioning of Alarm check valve with CI Body and Clapper, torsion Spring & Nut of Stainless Steel for 6" (150mm Dia) featured with grooved seat alarm port, external by pass and vertically installed Alarm Check Valve having Working pressure of 175psig, Flow Rate of 3000 lit/min, UL Certified, should have the following accessories like Pressure gauges, Pressure Operated switches, Drain Valve, Alarm Test Units, water motor gong, retard chamber inclusive.
1
-
-
Supply and providing 3mm Thick MS chequered plate including cutting, welding, painting etc. as required for shaft covering.
15
-
-
FIRE PIPES VALVES AND ACCESSORIES
-
-
-
Hydrant, Sprinkler System Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.250 mm Dia.
10
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.200 mm Dia.
144
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.150 mm Dia.
2082
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.100 mm Dia.
958
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.80 mm Dia.
959
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.65 mm Dia.
1336
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.50 mm dia.
1931
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.40 mm.
2243
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.32 mm Dia.
822
-
-
Hydrant, Sprinkler System & Plant Room : Providing, fixing, pressure testing and commissioning of Above Ground Fire Line Pipe Work with Heavy Duty (Class-C) Galvanized Steel Pipes, confirming to IS: 3589/1239 Part - I. The pipe with Heavy Duty Ductile Iron Screwed Fittings for Pipes up to 50 mm diameter. The pipe with DI Grooved Fittings for pipes above 50mm diameter. The pipe with Butt Welded fittings for pump room for all sizes. Piping shall be with all accessories required for complete installation such as tees, elbows, reducers, check nuts, unions, flanges, nipples and neoprene gasket, bolts, nuts, washers etc. including cutting, threading, grooving, joining, fixing in ducts, on walls, ceiling etc. by using suitable and strong enough supports, as per requirement, providing higher sizes of Sleeves/Opening, wherever required, and closing the gap between the pipes and sleeves/openings with 2 Hr. Fire Rated compound / sealant to the approval of Engineer - in - Charge /Consultant. The total pipe work shall be protected with approved painting system as per technical specification. All Pipe Fittings shall be UL Listed and FM Approved, as per the technical specification.25 mm Dia.
6426
-
-
Supply, fixing, testing and commissioning of Butterfly Valve, Wafer Type, Maximum Working Pressure 16 Bar, Gear Operated type, confirming to BS:5155 /ASTM A-536, grade 65-45-12, with Supervisory / Tamper Switch, as per Technical Specifications and with required matching Flanges, nuts, bolts etc. complete. 200 mm Dia.
2
-
-
Supply, fixing, testing and commissioning of Butterfly Valve, Wafer Type, Maximum Working Pressure 16 Bar, standard lever operated type, confirming to BS:5155 / ASTM A-536, grade 65-45-12, with Supervisory / Micro Switch, as per Technical Specifications and with required matching Flanges, nuts, bolts etc. complete. 150 mm Dia.
52
-
-
Supply, fixing, testing and commissioning of Butterfly Valve, Wafer Type, Maximum Working Pressure 16 Bar, standard lever operated type, confirming to BS:5155 / ASTM A-536, grade 65-45-12, with Supervisory / Micro Switch, as per Technical Specifications and with required matching Flanges, nuts, bolts etc. complete. 100 mm Dia.
98
-
-
Supply, fixing, testing and commissioning of Butterfly Valve, Wafer Type, Maximum Working Pressure 16 Bar, standard lever operated type, confirming to BS:5155 / ASTM A-536, grade 65-45-12, with Supervisory / Micro Switch, as per Technical Specifications and with required matching Flanges, nuts, bolts etc. complete. 80 mm Dia.
4
-
-
Supply, fixing, testing and commissioning of Butterfly Valve, Wafer Type, Maximum Working Pressure 16 Bar, standard lever operated type, confirming to BS:5155 / ASTM A-536, grade 65-45-12, with Supervisory / Micro Switch, as per Technical Specifications and with required matching Flanges, nuts, bolts etc. complete. 50 mm Dia.
4
-
-
NON-RETURN VALVE
-
-
-
Supply, fixing, testing and commissioning of Non Return Valve, Wafer Swing Check type, PN-16, conforming to IS: 5312-1(2004) with nuts, bolts etc. complete. 200 mm Dia.
3
-
-
Supply, fixing, testing and commissioning of Non Return Valve, Wafer Swing Check type, PN-16, conforming to IS: 5312-1(2004) with nuts, bolts etc. complete. 150 mm Dia.
18
-
-
Supply, fixing, testing and commissioning of Non Return Valve, Wafer Swing Check type, PN-16, conforming to IS: 5312-1(2004) with nuts, bolts etc. complete. 100 mm Dia
4
-
-
Supply, fixing, testing and commissioning of Non Return Valve, Wafer Swing Check type, PN-16, conforming to IS: 5312-1(2004) with nuts, bolts etc. complete. 80 mm Dia
4
-
-
BALL VALVE
-
-
-
Supply, fixing, testing and commissioning of Forged Ball Valve, PN-20 gunmetal /cast alloy, including necessary accessories and connections. 25 mm Dia
93
-
-
Supply, fixing, testing and commissioning of Forged Ball Valve, PN-20 gunmetal /cast alloy, including necessary accessories and connections. 50 mm Dia
89
-
-
UNDER GROUND PIPING
-
-
-
Providing, fixing, pressure testing and commissioning of Under Ground Fire Hydrant Pipe Work with Ductile Iron Pipes conforming to IS: 8329 / BIS EN: 545, Working Pressure 16 Bar (Class K-9), with Socket and Spigot. Pipe Fitting shall of Class K12. All the Pipes and Fittings shall with following protective coats / lining as per Standards and Manufacturers technical details. i. Internal lining with Cement Mortar ii. External Coating with a layer of metallic zinc + a layer of and bitumen coating. iii. Further protection with loose & air / water tight polythene sleeves.The cost for underground pipe work shall be inclusive of earthwork excavation and providing Masonry / PCC / RCC Thrust Blocks as per requirement.150 mm Dia
800
-
-
Providing, fixing, pressure testing and commissioning of Under Ground Fire Hydrant Pipe Work with Ductile Iron Pipes conforming to IS: 8329 / BIS EN: 545, Working Pressure 16 Bar (Class K-9), with Socket and Spigot. Pipe Fitting shall of Class K12. All the Pipes and Fittings shall with following protective coats / lining as per Standards and Manufacturers technical details.i. Internal lining with Cement Mortar ii. External Coating with a layer of metallic zinc + a layer of and bitumen coating. iii. Further protection with loose & air / water tight polythene sleeves.The cost for underground pipe work shall be inclusive of earthwork excavation and providing Masonry / PCC / RCC Thrust Blocks as per requirement.100 mm Dia
30
-
-
Providing, fixing, pressure testing and commissioning of Under Ground Fire Hydrant Pipe Work with Ductile Iron Pipes conforming to IS: 8329 / BIS EN: 545, Working Pressure 16 Bar (Class K-9), with Socket and Spigot. Pipe Fitting shall of Class K12. All the Pipes and Fittings shall with following protective coats / lining as per Standards and Manufacturers technical details.i. Internal lining with Cement Mortar. ii. External Coating with a layer of metallic zinc + a layer of and bitumen coating. iii. Further protection with loose & air / water tight polythene sleeves.The cost for underground pipe work shall be inclusive of earthwork excavation and providing Masonry / PCC / RCC Thrust Blocks as per requirement.80mm
45
-
-
Supply, installation, testing and commissioning of Fire Hydrant Valve, bearing to ISI:5290 Type-A mark, Stainless Steel-304 body with 63mm. oblique instantaneous single outlet, 75mm. N.B. flanged inlet, Stainless Steel -304 spindle, complete with PVC blank cap, G.I. chain etc.
104
-
-
Supply, installation, testing and commissioning of Branch Pipe, Stainless Steel-304, short type, with 63mm. male instantaneous inlet, male threaded outlet, fitted with 16mm. bore nozzle, having IS: 903 mark.
104
-
-
Supply, installation, testing and commissioning of Fire Hose, RRL hose jacketed with circular woven synthetic fiber. conforming to IS: 636:88, with Working Pressure 14 Kg/Cm2, Proof Pressure 22 Kg/Cm2 and Burst Pressure 38 Kg/Cm2. The Fire Hose shall be with IS: 636 Type-A marking and 63mm. dia.x15Mtr.long with pair of 63mm. male and female instantaneous couplings, Stainless steel-304, having IS: 903 mark and duly S. S. wire wounded.
208
-
-
Supply, installation, testing and commissioning of Manual Swing Type Fire Hose Reel Complete Set with heavy duty drum / reel, 19mm. dia. x 30Mtr. long 2-ply polyester yarn braided /rubber braided pressure hose, Red Coloured, heavy duty nylon on/off jet/spray nozzle, 22mm. isolating valve and all other necessary fixing accessories including Fabrication and Erection of M.S. Support, as per requirement, for Fixing the Fire Hose Reel Set.
86
-
-
Supply, installation, testing and commissioning of M.S. CRCA sheet fabricated 16 SWG Fire Hydrant hose boxes suitable for storing 2 Nos.15M hoses and 1 No. Branch pipe of 63mm dia size. Boxes will be duly painted with two coats zinc primer and finish fire red colour enamel paint outside with locking arrangement for Double leaf front glass doors having 4mm thick glass, complete as per specifications.
86
-
-
Supply and fix at site in position Weather Proof Fire Hose Cabinet, wall / pole mounting type, 30" x 24" x 10" size, to accommodate Two 15m length of delivery hose and branch pipe, acrylic fronted double door with lock 2 keys and a break glass recess for keys, painted Fire Red. The price shall be inclusive of fixing accessories and pole for mounting, all as per requirement.
18
-
-
Supply, installation, testing and commissioning of Fire Brigade Inlet Breeching, C.I. body, having 4 Gunmetal, 63mm. male instantaneous inlet, conforming to IS: 903, with non return valves, 25mm. drain valve, flanged outlet, 4 nos. of rubber blank caps and G.I. chains.
2
-
-
Supply, installation, testing and commissioning of Fire Brigade Draw Off Outlet C.I. body, having 4 Gunmetal, 63mm. female instantaneous inlet, conforming to IS: 903, with non return valves, 25mm. drain valve, flanged outlet, 4 nos. of rubber blank caps and G.I. chains.
1
-
-
Providing, fixing, testing and commissioning of Standard Coverage , Quick Response Automatic Fire Sprinkler, K- Factor: 5.6 (80 Metric) or equal to the approval of system consultant / engineer - in - charge, with necessary accessories and fittings.Pendant Type, 68 / 79 Degree C Rating
3939
-
-
Providing, fixing, testing and commissioning of Standard Coverage , Quick Response Automatic Fire Sprinkler, K- Factor: 5.6 (80 Metric) or equal to the approval of system consultant / engineer - in - charge, with necessary accessories and fittings.Pendant Type, 93 Degree C Rating
45
-
-
Providing, fixing, testing and commissioning of Standard Coverage , Quick Response Automatic Fire Sprinkler, K- Factor: 5.6 (80 Metric) or equal to the approval of system consultant / engineer - in - charge, with necessary accessories and fittings.Upright Type, 68 Degree C Rating.
2573
-
-
ROSETTE PLATE - Providing & Fixing 2 Piece Chrome Plated Friction Fit recessed escutcheon for pendant sprinklers, as per requirement.
3241
-
-
Providing, Fixing, Testing and Commission Flexible Sprinkler Hose; UL Listed, FM Approved, 25mm. (1") BSP Male Inlet, 15mm. (1/2") NPT Female Outlet, Braided, Working Pressure 13.8 Bar, length: 1500 mm, and with all connecting systems and accessories.
3241
-
-
Providing, fixing, testing and commissioning of SLUICE VALVE Ductile Iron, PN-16, TYPE: RISING STEM, PROD STD: IS 14846, Body-DUCTILE IRON (ASTM A 536), SEAT: Cu-Alloy, Stem: SS.410, Ends :FLANGED AS PER IS 1538/PN 16, PRESS. RATING : BODY: 21kg/cmsq, SEAT: 16 kg/cmsq. as per Technical Specifications and with required matching Flanges, nuts, bolts etc. complete. 200 mm;
2
-
-
Providing, fixing, testing and commissioning of SLUICE VALVE Ductile Iron, PN-16, TYPE: RISING STEM, PROD STD: IS 14846, Body-DUCTILE IRON (ASTM A 536), SEAT: Cu-Alloy, Stem: SS.410, Ends :FLANGED AS PER IS 1538/PN 16, PRESS. RATING : BODY: 21kg/cmsq, SEAT: 16 kg/cmsq. as per Technical Specifications and with required matching Flanges, nuts, bolts etc. complete. 150 mm
6
-
-
Providing and fixing sight glass assembly of brass body and brass ball with chrome plated, steel handle, PN16 or above, UL Listed & FM Approved. Test and drain valve shall be with compact 3 position ball valves with drain orifice having K-factor 5.6 and a sight glass. 3 positions consist of OFF, TEST and DRAIN. Test and drain valves shall be provided for test as well as express drain functions in wet sprinkler systems with grooved end connection ends. The Test and Drain Valve shall be in Brass ASTM B584 material of construction. These have integral tamper resistant sight glass.
86
-
-
FIRE ALARM SYSTEM
-
-
-
Fire Alarm Control Panel - Supply, install, test and commission of Intelligent Addressable Fire Alarm Control Panel (MCP) as per the technical specification and not limited to having Visual Display Unit(VDU) preferably 640 character LCD display with Battery Back up for 24 hours for normal operation and 1 hours on alarm condition. The control panel, battery charger etc, shall be UL listed approved. The panel shall be networked together and capable of networking with other compatible panels. The panel should be equipped with Loop Cards of adequate capacity as per manufacturer recommendation to incorporate the devices and detectors for this project considering 20% spare capacity in each loop. The panel should be expandable to add another Loop card and all as per Technical Specifications.
1
-
-
REPEATER PANEL;Supply, install, test and commission Intelligent Addressable Network Repeater Panel (NRP) with minimum Color display, mapping minimum 2,00,000 points on network. This NRP shall act as an independent node communicating on the peer to peer network and shall not be dependent on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation. The Unit shall be complete in all respect and the Cost of Panel shall inclusive of Network Communication Module(s) (NCM), for networking with the Main Fire Alarm Panels. All as per Technical Specifications.
1
-
-
Addressable Manual Call Point (Pull down / Break Glass Type). Addressing shall be with user friendly Rotary and dip switch/electronically addressable. The MCP shall be UL Listed and FM Approved.
107
-
-
MULTI SENSOR DETECTORS. Providing, fixing, test and commission Intelligent Addressable Multi Sensor Detectors. The detectors shall have multiple sensitivity (adjustable at site) levels, programmable for timed automatic sensitivity selection complete with Standard Base, junction box and other accessories as required. Detectors shall be UL listed and FM Approved.(a) Above / below ceiling.
2917
-
-
SITC of Addressable Rate of Rise Heat Detector rated at 9.4 deg C/min. The detector shall have LED for 360 deg viewing. Addressing shall be with user friendly Rotary and dip switch/electronically addressables.The detector shall be UL Listed and FM Approved.
95
-
-
SITC of Addressable Sounder cum Strobe rated at 75 dBA @ 3m for Audible annunciation and 75cd flashintg at 1 Hz for visual indication. The sounder shall be UL Listed and FM approved.
102
-
-
SITC of Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide DPDTcontact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. Addressing shall be with user friendly rotary decimal/Dip switches/Electronically Addressable. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. The Module shall be UL Listed and FM Approved.
102
-
-
SITC of Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression other Third Party Outputs. The relay module shall provide DPDT contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. Addressing shall be with user friendly rotary decimal/DIP switches/Electronically Addressable. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. The Module shall be UL Listed and FM Approved.
90
-
-
SITC of Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall provide DPDTcontact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal/DIP switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. The Module shall be UL Listed and FM Approved.
90
-
-
SITC of Addressable Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. The Module shall be UL Listed and FM Approved.
155
-
-
Providing, fixing / laying, test and commission 2Core x 1.5 mm2 FRLS Armored Cables with Red Colour, as per requirement and Technical Specifications.
34801
-
-
Providing, Fixing, testing and commissioning of Flow Switch, Vane type, IP 65 Protection with above 20 Bar Working Pressure Protection with all necessary accessories, for monitoring Fire Sprinkler System. The control cabling from flow switches to Fire Sprinkler Annunciating Panel shall be measured separately.
88
-
-
TALK BACK ANNOUNCING CONSOLE
-
-
-
Providing, fixing, testing and commissioning of 6 Watt Wall Mounted type Talk Back System Speaker with Call Switch, in suitable and approved housing to approved colour /shade, all as per specification.
88
-
-
Providing, fixing, laying, test and commissioning 2Core x 1.5 mm2 FRLS Armoured Cables, as per Technical Specifications.
4400
-
-
Providing, fixing, test and commission of 88 Zone Simplex type talk back master control Console having zone wise selection in powder coated 16 SWG CRCA sheet housing, complete with 8 to 96 zone expandable system, AC and DC meter to measure supply, push to talk facility by call/call back facilities and Mike LED display unit for location display, in built battery charger and battery space along with Amplifier, 500 W RMS Output including necessary control wires, jackets as per specification and required.
1
-
-
SIGNAGES
-
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(a) Fire Lift sign board (12" x 4").
48
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(b) Passenger/Fire Lift sign board (12"x 4")
96
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(c) Fire Duct sign board (12" x 4")
88
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(d) Fire Exit Light, Laser type, with High Glow LED, size: 12" x 6" Size, Ceiling Mounting type with hanging clamps, on/off switch, Red/ Green Colour option, power consumption: 18 Watt, with 2 Hr. battery backup.
64
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(e) Electrical Duct sign board (12" x 4").
64
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners. (f) Main Staircase sign board (12" x 4")
40
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(g) Fire Staircase sign board (12" x 4")
48
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(h) Floor Display sign board (12" x 4").
80
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners. (i) Fire Assembly Point (16" x 16").
2
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(j) Pump Room sign board (12" x 4").
1
-
-
Supply and install in position Sign Boards made out of 3mm thick "Opaque" PVC foam board with computer cut, self adhesive vinyl painted foam board in photolumiscent material complete vide technical specifications with mirror fasteners. Sizes and mounting height of the board shall be as per technical specification, complete with mirror fasteners.(k) Fire Control Room sign board (12" x 4").
1
-
-
Supply, installation, testing & commissioning of Portable Fire Extinguisher as per BIS 2190 and IS: 15683:2018 and with relevant ISI Stamping/Marking. ABC Dry Chemical Store Pressure Type - 4 Kg.
212
-
-
Supply, installation, testing & commissioning of Clean Agent Modular Type Fire Extinguisher 5Kgs Capacity made of Mild Steel Body of 1.6 mm thickness with pressure gauge, refillable device and safety release device CE Certified Brass valve suitable for A, B and C Classes of Fire complete with charge of HFC Blend A, It is a blend of Hydro Fluoro Carbon and organic detossificant essence P26. The sprikler body will comprise of temperature sencitive quartsoid bulb of temperature rating of 68 deg C. The cylinder will be supplied with a proper mounting arrangement to mount it on the ceiling. Fire Extinguisher manufatured as per BIS 2190 and IS: 15683:2018 and with relevant ISI Stamping/Marking.
30
-
-
Supply and Fixing of load bearing Fire stop mortar CP636 or equivalent system with minimum 2 hours fire rating when tested in accordance with UL 1479 standards, for openings in floors or slabs after passing service lines. The mortar shall be a light weight cementitious product and shall carry test certificate in accordance with IEC 60068-2-57:1999-11 (Environmental Testing) as per Part 2-57: Test for Vibration-Time-history method and VERTEQII for seismic zone 4. The product shall be age tested as per Dafstb and DIBT standards. The product shall carry test certificate for mold resistance rating of 0 as determined by ASTM G21-96 and shall have a VOC content of approx. 1 g/l as per LEED 2009. Firestop installation should be done by trained applicators and in accordance with manufacturers guidelines by providing 10mm dia rebars at 200mm c/c both ways with chemical anchoring along the length and breadh of the shaft and provide 2 layers of chicken mesh etc.,as the base for fire mortar at 65mm thickness having load bearing capacity of 200kg/sq.mtr, For shaft size more than 0.64 sqmtr proper engineering judgement needs to be submitted through the manufacturer. Applicator needs to submit complete installation report for inspection purpose.
472
-
-
Heating Ventilation & Air-Conditioning (HVAC) and IBMS Works
WATER CHILLING PLANT
-
-
-
WATER CHILLING PLANT:
Supply at site including local transport with full cover insurance, fire or any other contingencies, unload, store, handle, erect, balance, test and commission the entire water chilling plant as per specifications including all accessories as specified for water chilling plant.
WATER COOLED TWIN SCREW CHILLER - (R-134A/410) EACH WITH SEMI SEALED / SEALED, SINGLE/MULTIPLE COMPRESSOR OF MINIMUM CAPACITY 300 TR. Minimum Overall Chiller efficiency offered shall have COP Greater than or equal to 6.2 / IPLV Greater than or equal to 8.1 at ANSI / AHRI 550/590 condition reference to ECBC + Buildings 2017. Summer Ambient conditions: DBT – 95 deg F, WBT- 82 Deg F Comprising of Screw Compressor as per specifications. Drive motors of suitableratings 415+/- 10% Volts 50 Hz AC supply and starter panel with soft starter. Water cooled condenserwith all accessories. Automatic capacity control unit to regulate the capacity down to 20%. Microprocessor control panel. Building management system compatible software Data Link / Micro Gateway for integration with third -party BMS on Modbus / BACNET protocol, Safety controls as per spec. wiring
and interlock between pumps shall be included in the chiller cost
Water cooled chiller with all accessories:
LOT-integral mounting frame for all the components,
LOT-refrigerant piping & valves, LOT-insulation of chiller and suction line,
LOT-first charge of refrigerant and lube oil,
LOT-vibration isolation pads.
LOT-Thermometer for water inlet and outlet and water flow switches.
Chiller Control Panel with ACB/MCCB's with copper cable interconnections, earthing,
Capacitors (all with Suitable ratings as per standard) for chiller to be included in the chiller cost. Only Incoming power supply cabling and earthing will be terminated by other agencies.
R.C.C foundation along with PCC/RCC sub base with fixing of foundation bolts and nuts, spring mounts and finishing the slabs as well as openings and finishing of civil structures (only RCC Foundation cost measured separately)."
2
-
-
Supply at site including local transport with full cover insurance, fire or any other contingencies, unload,store, handle, erect, balance, test and commission the entire water chilling plant as per specifications including all accessories as specified for water chilling plant. WATER COOLED TWIN SCREW CHILLER WITH VFD - (R-134A/410) EACH WITH SEMI SEALED / SEALED, SINGLE / MULTIPLE COMPRESSOR OF MINIMUM CAPACITY 300 TR. Minimum Overall Chiller efficiency offered shall have COP Greater than or equal to 6.2 at ANSI / AHRI 550/590 condition reference to ECBC + Buildings 2017 / IPLV Greater than or equal to 9.5. Summer Ambient conditions: DBT – 95 deg F, WBT- 82 Deg F. Comprising of Screw Compressor as per specifications. Drive motors of suitable ratings 415+/- 10% Volts 50 Hz AC supply and starter panel with soft starter. Water cooled condenser with all accessories:
Automatic capacity control unit to regulate the capacity down to 25%. Micro-processor control panel.
Building management system compatible software Data Link / Micro Gateway for integration with third - party BMS on Modbus / BACNET protocol, Safety controls as per spec. wiring and interlock between pumps shall be included in the chiller cost. Water cooled chiller with all accessories:
LOT integral mounting frame for all the components,
LOT-refrigerant piping & valves, LOT-insulation of chiller and suction line,
LOT-first charge of refrigerant and lube oil,
LOT-vibration isolation pads. LOT-Thermometer for water inlet and outlet and water flow switches. MCCB's as a part of the chiller. Copper cable & isolators for chiller to be included in the chiller cost. Isolators at the incoming side including capacitor power supply and earthing will be terminated by other agencies. Power supply and earthing will be terminated in the isolator by other agencies. R.C.C foundation along with PCC/RCC sub base with fixing of foundation bolts and nuts, spring mounts and finishing the slabs as well as openings and finishing of civil structures.
2
-
-
PUMPS AND COOLING TOWER
-
-
-
Supply, installation, testing & commissioning the chilled water primary pumps as per specification including all accessories as specified and as required. Including Factory made base frame & fixing foundation with necessary fittings as required. End suction Chilled water Pump sets complete with TEFC squirrel cage induction motor (WITH MECHANICAL SEAL) stainless steel shaft, bronze impeller, End Suction, Long coupled Type, base plate couplings, pressure gauges (2 Nos. with syphon and gauge cock, anti vibration springs. guards etc. including insulation as per specifications. Pump efficiency shall be as per ECBC + Buildings 2017.
Capacity : 720 USgpm, 1440 RPM (Suggested) (3 Working + 1 Standby)
Head : 45 feet
Motor, IE 3 : 15 HP (Suggested)
4
-
-
Supply, installation, testing & commissioning the chilled water secondary pumps as per specification including all accessories as specified and as required. Including Factory made base frame & fixing foundation with necessary fittings as required. End suction Chilled water Pump sets complete with TEFC sq. cage induction motor (WITH MECHANICAL SEAL) stainless steel shaft, bronze impeller, End Suction Long coupled Type, base plate couplings, pressure gauges (2 Nos. with syphon and gauge cock, anti vibration springs. guards etc. including insulation as per specifications. Pump efficiency shall be as per ECBC + Buildings 2017.
Capacity : 720 USgpm, 1440 RPM (Suggested) (3 Working + 1 Standby)
Head : 100 feet
Motor, IE 3 : 30 H.P (Suggested)
4
-
-
Supply, Installation, testing & commissioning the condenser water pumps as per specification including all accessories as specified and as required. Including Factory made base frame & fixing foundation with necessary fittings as required. End suction Chilled water Pump sets complete with TEFC squirrel cage induction motor (WITH MECHANICAL SEAL) stainless steel shaft, bronze impeller, End Suction Long coupled Type, base plate couplings, pressure gauges (2 Nos. with syphon and gauge cock, anti vibration springs. guards etc. including insulation as per specifications. Pump efficiency shall be as per ECBC + Buildings 2017.
Capacity : 1200 USgpm, 1440 RPM (Suggested) (3 Working + 1 Standby)
Head : 70 feet
Motor, IE 3 : 30 H.P (Suggested)
4
-
-
Supply, Installation, testing & commissioning the cooling towers as per specification including all accessories as specified and as required. COOLING TOWERS with VFD of actual capacity complete in all respects as per technical specifications and equipment schedule complete with FRP casing, FRP fan cylinder, PVC louvers, PVC drift eliminator polypropylene nozzles, drive assembly, HDG fan guard/bird screen, non-clogging nozzle type water distribution system. PVC fill, aluminium ladder with railings, make up water, quick fill and drain over flow connections with valves & fittings etc. as per specifications. Including R.C.C foundation along with PCC/RCC sub base, fixing with bolts and nuts and finishing the slabs or any opening etc.
300 TR - CTI/JCI approved induced draft, cross flow cooling tower with vertical air discharge.
EWT = 97.5 degree F
LWT = 90 degree F
WET bulb = 82 degree F
Flow rate = 1200 USgpm Motor, IE 3 : 15 H.P (Suggested)
4
-
-
DOUBLE SKIN AIR-HANDLING UNITS WITH VFD AND PLUG FANS AND THERMAL BREAK
-
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification
including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
35 TR, 14000 CFM, 28 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc.
Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm
Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static
30 TR, 12000 CFM, 24 sqft./ 4r Row
(Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation
theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static
28 TR, 11200 CFM, 22.56 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the Air Handling Units as per specification including all accessories as specified and as required. VFD driven AHU with plug fans and VFD starter panel with all necessary connections with pressure sensors (minimum 2 nos.) and cabling to be included. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium penta post frame work, Fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq.cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame, 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
"Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the the inlete and outlet of coiling coils for pressure gauges (only provision), duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable off push button to be provided near AHU if machine is 3mtrs and above far from respective panel board to be included in the AHU cost.
Fixing with bolts and nuts and finishing the slabs or any opening etc good as same to be included in the cost
Notes: Fine filter efficiency 99.9% down to 5 micron.
External Static Pressure for:
Operation theater AHU's 100 mm Static
Cathlab, CT/MRI AHUs- 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static"
25 TR, 10000 cfm, 20 sqft./ 4row
(Double Skin Floor mounted Horizontal AHU with mixing Box)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of
rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm
Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static
20 TR, 8000 CFM, 16 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification Including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of
rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm
Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static
18 TR, 7200 CFM, 14.4 sqft./ 6 Row (Double Skin Floor mounted Horizontal AHU with mixing Box)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static
15 TR, 6000 CFM, 12 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
13 TR, 5200 CFM, 10.4 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of
rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static
12 TR, 4800 CFM 9.6 sqft / 4 Row.
(Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of
rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static
10 TR, 4000 CFM, 8 sqft / 4 Row. (Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of
rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm
Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static
all other AHU's - 50 mm Static
9 TR 3600 CFM 7.2 sqft / 4 Row. (Double Skin Floor mounted Horizontal AHU with mixing Box)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
8 TR 3200 CFM 6.4 sqft / 4 Row. (Double Skin Floor mounted Horizontal AHU with mixing Box)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
4 TR 1600 CFM 3.2/ 4 Row.
(Double Skin Floor mounted Horizontal AHU with mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
30 TR, 12000 CFM, 24 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
27 TR, 10800 CFM, 21.6 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
25 TR, 10000 CFM, 20 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
27 TR, 10800 CFM, 21.6 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter, 2 x 3 KW (Suggested) Heater)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
25 TR, 10000 CFM, 20 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
22 TR, 8800 CFM, 17.6 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
21 TR, 8400 CFM, 16.8 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
20 TR, 8000 CFM, 16 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
4
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
18 TR, 7200 CFM, 14.4 sqft./ 4 Row (Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
4
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
16 TR, 6400 CFM, 12.8 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
15 TR, 6000 CFM, 12 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
14 TR, 5600 CFM, 11.2 sqft./ 4 Row
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
12 TR, 4800 CFM 9.6 sqft / 4 row.
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter, 3 KW (Suggested) Heater)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
12 TR, 4800 CFM 9.6 sqft / 4 Row.
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
11 TR 4400 CFM 8.8 sqft / 4 Row.
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
3
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
10 TR 4000 CFM 8 sqft / 4 Row.
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
9 TR 3600 CFM 7.2 sqft / 4 Row.
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
7 TR 2800 CFM 5.6 Sqft/ 4 Row. (Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick
synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
4 TR 1600 CFM 3.2 Sqft / 4 Row.
(Double Skin Floor mounted Horizontal AHU with mixing Box, Fine Filter)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
5 TR, 2000 CFM, 4 sqft./ 4 Row
(Double Skin ceiling suspended AHU with Mixing Box)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
4 TR 1600 CFM 3.2 Sqft / 4 Row.
(Double Skin ceiling suspended AHU with Mixing Box)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
10 TR, 4000 CFM, 8 sqft / 4 Row. (Double Skin ceiling suspended AHU)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
9 TR 3600 CFM 7.2 Sqft / 4 row. (Double Skin ceiling suspended AHU)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick
synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
7 TR 2280 CFM 4.56 Sqft / 4 row.
(Double Skin ceiling suspended AHU)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick
synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
6 TR 2400 CFM 4.8 Sqft / 4 row. (Double Skin ceiling suspended AHU)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static
5 TR, 2000 CFM, 4 sqft./ 4 Row
(Double Skin ceiling suspended AHU)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static 4 TR 1600 CFM 3.2/ 4 row.
(Double Skin ceiling suspended AHU with fine filter, mixing Box)
2
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static 20 TR, 8000 CFM, 16 sqft./ 6 Row - CSSD
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static 12 TR, 4800 CFM 9.6 sqft / 6 Row.
(Double skin Ceiling suspended AHU with VFD, 6 Row, 2X3 KW (Suggested) Heater)
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static 14 TR, 6750 CFM, 13.5 sqft./ 6 Row - LG1 MRI
Double skin floor mounted Double Decker AHU with VFD, 6 Row, 10 Micron filter, 6750 CFM, 2X3 KW
(Suggested) heater (Fine filter in Plenum). Note: AHU Selection shall be done as per the actual site condition & and as per equipment manufacturer recommendation / requirement.
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static 7 TR, 2800 CFM, 5.6 sqft./ 6 Row - LG1 Procedure Room
Double Skin Floor mounted Horizontal AHU with mixing box, 10 micron pre filters , 5 micron fine filters, heater capacity 2X3KW (Suggested), Thermal break.
Note: AHU Selection shall be done as per the actual site condition & and as per manufacturer recommendation / requirement.
1
-
-
Supply, Installation, testing & commissioning the following Air Handling Units as per specification including all accessories as specified and as required for complete installation. The cost inclusive of VFD starter panel in a separate enclosure with necessary rating incomer isolator / MCCB /contactor with bypass starter system with all accessories including necessary connections, inter connections and control wiring with pressure sensors (minimum 2 Nos.) for complete in station. Only HVAC application VFD's shall be used. All AHU’s will be given only one power input cable. Any looping should be done by OEM in case of multiple motors in one AHU. AHU shall be Pre-Plasticised Sheet/powder coated, Extruded Aluminium panta post frame work, fan section, coil section, filter section, with necessary insulations, drain pan, etc. Cooling coil of copper tubes and aluminium fins (min. 10 fins per inch) and required number of rows deep. IE-3 efficiency TEFC sq. cage induction motor of required rating including mounting and fixing arrangements. Plug fan with VFD Drives anti vibration springs/isolator bearings etc. 10 mm thick
synthetic media filter with frame. 90% efficiency down to 20 micron. Insulation of all section with fire retardant insulation material as per manufactures standard. Air vent on cooling coil with globe valve/screwed plugs. Insulation of Drain pan as per specifications. Double canvas connections of fire retardant quality for connecting AHU's to ducting/plenum. Insulated drain piping with trap till the out let of the AHU. Balance will be measured in the chilled water piping.
Thermostat, Thermowell at the inlet and outlet of cooling coils, gauge cocks at the inlet and outlet of cooling coils for pressure gauges, duct damper, including Control wiring to make M/V in close position while AHU is OFF with relays etc. Limit switch in door and inspection lamps to be fixed. Lockable on/off push button to be provided near AHU to be included in the AHU cost. Fixing with bolts and nuts and finishing the slabs or any opening etc. good as same.
Notes : Fine filter efficiency 99.9 % down to 5 micron.
Static Pressure for : Operation theatre AHU's 100 mm Static Cathlab / CT / MRI - 65 mm Static
AHU's with fine filters - 55 mm Static all other AHU's - 50 mm Static 18 TR, 7525 CFM, 15.05 sqft./ 6 Row - Cath Lab
Double skin floor mounted AHU with VFD, Mixing Box, 6 Row, 10 micron filter, 7525 CFM , 2X3 kW (suggested) Heater (Fine filter in Plenum)
Note: AHU Selection shall be done as per the actual site condition & and as per equipment manufacturer recommendation / requirement.
2
-
-
TREATED FRESH AIR UNIT WITH HEAT RECOVERY WHEEL, VFD, SUPPLY AND RETURN FANS
-
-
-
TREATED FRESH AIR UNIT WITH HEAT RECOVERY WHEEL, VFD, SUPPLY & RETURN FANS:
Supply at site including local transport, unload, store, handle, erect, balance and commission the entire Air Handling Unit with Heat Recovery Wheel as per specifications including all accessories as specified and as required
Summer Ambient conditions: DBT – 95 deg F, WBT- 82 Deg F
Return Air condition: DBT- 75 Deg F , RH– 55%
Supply Fan Static - 60 to 70 mm WG
Return fan - 40 mm to 60 mm WG
Efficiency 80- 85%"
TFA -1 - Block A
TFA - 15 TR AHU, 5.5 sq.ft./ 8
Row coil with 2450 CFM Supply fan, 2550 CFM Return fan and heater coil of 2 x 3KW.
1
-
-
TREATED FRESH AIR UNIT WITH HEAT RECOVERY WHEEL, VFD, SUPPLY & RETURN FANS
Supply at site including local transport, unload, store, handle, erect, balance and commission the entire Air Handling Unit with Heat Recovery Wheel as per specifications including all accessories as specified and as required
Summer Ambient conditions: DBT – 95 deg F, WBT- 82 Deg F
Return Air condition: DBT- 75 Deg F , RH– 55%
Supply Fan Static - 60 to 70 mm WG
Return fan - 40 mm to 60 mm WG, Efficiency 80- 85%"
TFA -2 - Middle Block TFA - 25 TR AHU, 9.5 sq.ft./ 8 Row coil with 4800 CFM Supply fan, 4250 CFM Return fan and heater coil of 2 x 3KW
1
-
-
TREATED FRESH AIR UNIT WITH HEAT RECOVERY WHEEL, VFD, SUPPLY & RETURN
FANS
Supply at site including local transport, unload, store, handle, erect, balance and commission the entire Air Handling Unit with Heat Recovery Wheel as per specifications including all accessories as specified and as required
Summer Ambient conditions: DBT – 95 deg F, WBT- 82 Deg F
Return Air condition: DBT- 75 Deg F , RH– 55%
Supply Fan Static - 60 to 70 mm WG
Return fan - 40 mm to 60 mm WG
Efficiency 80- 85%
TFA -3 - Block F
TFA - 20 TR AHU, 7.1 sq.ft./ 8
Row coil with 3750 CFM Supply fan, 3200 cfm Return fan heater coil of 2 x 3KW.
1
-
-
FAN COIL UNITS WITH VALVE STATIONS
-
-
-
Fan Coil Units with valve station:
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch. Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
0.75 TR Hideaway FCU
2
-
-
Fan Coil Units with valve station:
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch. Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
1 TR Hideaway FCU
41
-
-
Fan Coil Units with valve station:
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch. Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
1.25 TR Hideaway FCU
5
-
-
Fan Coil Units with valve station:
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch. Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
1.5 TR Hideaway FCU
24
-
-
Fan Coil Units with valve station:
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch. Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
2 TR Hideaway FCU
10
-
-
Fan Coil Units with valve station
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch.
Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
2.5 TR Hideaway FCU
3
-
-
Fan Coil Units with valve station
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch.
Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
3 TR Hideaway FCU
9
-
-
Fan Coil Units with valve station
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch.
Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
3.5 TR High static FCU
3
-
-
Fan Coil Units with valve station
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch.
Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
4 TR High static FCU
1
-
-
Fan Coil Units with valve station
Supply, installing, testing and commissioning of Fan Coil Units each complete with filters of 20 micron filtering capacity, coil section with chilled water cooling coil and fan section with forward curved multi blade centrifugal blower and suitable TEFC Sq.cage induction motor, extended drain pan copper connections from isolating ball valve to fan coil unit cooling coil complete with flare-nuts, nipple, brazing of pipe joints, etc. with expansion loop, providing and fixing GM ball valve (with SS ball) with Y strainer for inlet of cooling coils, pipe connection between drain outlet and drain piping with 2nos. hose S clamps, providing and fixing male-female Copper connections from isolating ball valve to fan coil unit cooling coil (15mm/19mm OD) complete flare-nuts nipple, brazing of pipe joints etc. with expansion loop, extended tray double skin & with room thermostat cum fan speed selector switch.
Including 2 Way Type PRESSURE INDEPENDENT VALVE (ON/OFF)
4.5 TR High static FCU
1
-
-
Cassette type units: Supply, installing, testing and commissioning of following 4 way cassette units with drain pump & fresh air provision as per specification including all accessories as specified and as required
3 TR cassette unit
2
-
-
Cassette type units: Supply, installing, testing and commissioning of following 4 way cassette units with drain pump & fresh air provision as per specification including all accessories as specified and as required
2.5 TR cassette unit
10
-
-
Cassette type units: Supply, installing, testing and commissioning of following 4 way cassette units with drain pump & fresh air provision as per specification including all accessories as specified and as required.
2 TR cassette unit
2
-
-
CHILLED WATER PIPING AND VALVES
-
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
350 mm dia.
155
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
300 mm dia.
15
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
250 mm dia.
280
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut
grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
200 mm dia.
660
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
150 mm dia..
215
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut
grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
125 mm dia.
475
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
100 mm dia.
220
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
80 mm dia.
500
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
65mm dia.
710
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut
grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
50mm dia.
975
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
40mm dia.
575
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
32mm dia.
675
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
25mm dia.
1015
-
-
Supply, receive, store, handle, install, test and commissioning of the following pre-insulated chilled water MS class (B) pipes, including high tech supports complete with all fittings such as bends, tees, elbows, reducers flanges, special fittings, suspension hangers, supports etc. as required for installation as per site conditions and as per specifications. Underground piping shall have bitumen coating. Piping insulation shall be expanded polyurethane foam with 36 kg/cu m minimum density, 90% minimum closed cell content, minimum compressive strength of 40 psi and thermal conductivity of 0.14 Btu-in/hr/ft2/°F. The insulation shall completely fill the annular space between the service pipe and jacket and shall be bonded to both, the service pipe & jacket. All the fittings & bends shall be finished with the same finish as specified for preinsulated pipe, supplied by the same company. All supports pipes to be welded with Vcut grooves as per specifications. MS Class B, IS 3589, IS 1239 piping. RCC opening as good as same.
Wall opening as good as same.
20mm dia.
1300
-
-
Site fabricated pipe (MS class B) with adequate structural support and with PUF injection insulation & GI cladding for part plant room & AHU room area & valve insulation with openable boxing for inspection.
350 mm dia.
150
-
-
Site fabricated pipe (MS class B) with adequate structural support and with PUF injection insulation & GI cladding for part plant room & AHU room area & valve insulation with openable boxing for inspection.
200 mm dia.
110
-
-
DRAIN WATER PIPING:
Supply and fixing in position of condensate drain water & AHU room drain pipe to the floor trap/nearest drain piping with 25 mm nitrile rubber insulation and with necessary fittings like traps, clamps, elbows, tees and reducers etc. Openings as good as same.
25 mm dia. GI
50
-
-
DRAIN WATER PIPING:
Supply and fixing in position of condensate drain water & AHU room drain pipe to the floor trap/nearest drain piping with 25 mm nitrile rubber insulation and with necessary fittings like traps, clamps, elbows, tees and reducers etc. Openings as good as same.
32 mm dia. PVC
100
-
-
DRAIN WATER PIPING:
Supply and fixing in position of condensate drain water & AHU room drain pipe to the floor trap/nearest drain piping with 25 mm nitrile rubber insulation and with necessary fittings like traps, clamps, elbows, tees and reducers etc. Openings as good as same.
25 mm dia PVC
250
-
-
DRAIN WATER PIPING:
Supply and fixing in position of condensate drain water & AHU room drain pipe to the floor trap/nearest drain piping with 25 mm nitrile rubber insulation and with necessary fittings like traps, clamps, elbows, tees and reducers etc. Openings as good as same.
20 mm dia PVC
500
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
350 mm dia.
4
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
300 mm dia.
1
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
250 mm dia.
2
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
200 mm dia.
30
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
150 mm dia.
4
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
125 mm dia.
6
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
100 mm dia.
6
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
80 mm dia.
16
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
65 mm dia.
48
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
50 mm dia.
116
-
-
BUTTERFLY VALVES for AHU, Chiller Plant, Floor isolation:
Supply, installation, testing & commissioning of the following Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
40 mm dia.
54
-
-
Supply, installation, testing & commissioning of the following type forged Ball Valve, PN-20 gunmetal /cast alloy, including all necessary accessories and connections.
40 mm dia.
54
-
-
Supply, installation, testing & commissioning of the following type forged Ball Valve, PN-20 gunmetal /cast alloy, including all necessary accessories and connections.
32 mm dia
60
-
-
Supply, installation, testing & commissioning of the following type forged Ball Valve, PN-20 gunmetal /cast alloy, including all necessary accessories and connections.
25 mm dia
16
-
-
Supply, installation, testing & commissioning of the following type forged Ball Valve, PN-20 gunmetal /cast alloy, including all necessary accessories and connections.
20 mm dia.
4
-
-
Supply, installation, testing & commissioning of the following type forged Ball Valve, PN-20 gunmetal /cast alloy, including all necessary accessories and connections.
15mm dia.
444
-
-
Supply, installation, testing & commissioning of the following non return valves as per the specifications and as required. Non Return valves up to 65mm size shall be of gun metal with screwed female ends. Valves of 65mm and above shall be of CI with flanged ends. PN 16 pressure rating, EPDM seal.
Non- Return Valve of size:- 200 mm dia
8
-
-
BALANCING VALVE WITH PROVISION FOR FLOW MEASURMENT:
Supply, installation, testing & commissioning of Balancing valve with built in measuring facility, C.I Body with EPDM seal, long pitch with protected out pipe insulation & PN 16 pressure rating for chilled water as specified. Balancing Valve with 90 Deg C maximum operating temperature; built-in locking device for Tamper-Proof positioning; flanged connections; Valves shall have connections with isolation device for portable differential pressure meter with integral seals, Flow accuracy shall be 5%(+/-), necessary insulation as per specification
Balancing valve with built in measuring facility 200 mm dia
4
-
-
SUCTION GUIDE with strainer:
Supply, installation, testing & commissioning of the following suction guides as per the specifications and as required.
Size: 200 mm dia.
8
-
-
Y STRAINER FOR AHU's:
Supplying, fixing, testing and commissioning of following Y- Strainer in the chilled water piping duly insulated to the same specifications as the connected piping and adequately supported as per specifications. "
Y- Strainer of 65 mm dia
12
-
-
Y STRAINER FOR AHU's:
Supplying, fixing, testing and commissioning of following Y- Strainer in the chilled water piping duly insulated to the same specifications as the connected piping and adequately supported as per specifications. "
Y- Strainer of 50 mm dia.
26
-
-
Y STRAINER FOR AHU's:
Supplying, fixing, testing and commissioning of following Y- Strainer in the chilled water piping duly insulated to the same specifications as the connected piping and adequately supported as per specifications. "
Y- Strainer of 40 mm dia.
16
-
-
Y STRAINER FOR AHU's:
Supplying, fixing, testing and commissioning of following Y- Strainer in the chilled water piping duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y- Strainer of 32 mm dia
23
-
-
Y STRAINER FOR AHU's:
Supplying, fixing, testing and commissioning of following Y- Strainer in the chilled water piping duly insulated to the same specifications as the connected piping and adequately supported as per specifications. Y- Strainer of 25 mm dia
7
-
-
16.8 : Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
192
-
-
THERMOMETERS - For chiller, pumps, AHU: Supply, installation, testing and commissioning of 4 inch Dial type thermometers with Stem with Copper-plated steel, aluminum, or brass for thermowell installation and of length to suit installation, Stainless Steel U-Siphon and 15mm Brass body ball valve as per specification
192
-
-
Supply, installation, testing & commissioning of differential pressure switch as per the specifications and as required.
4
-
-
Supply, installation, testing & commissioning of the following motorized cut off valves as per the specifications and as required. Cl Body, minimum PN-16 pressure rating, conforming to BS 5155, IS 13095, capable of accepting upto 10V DC and upto 20mA electric signal and providing similar transduced feedback output to control system as required.
Size: 200 mm dia.
4
-
-
1500 L Pressurized Tank:
Design, supply, installation, testing and commissioning of Pressurised chilled water expansion tank with insulation, Make up connection for closed loop system along with necessary pneumatic devices and accessories and MS 'C' section supports in order to keep chilled water under pressure. The tank shall be precharged steel tank with replacable heavy duty butyl rubber bladder. The tank shall have 50 mm system connection and 20 mm drain and charging valve connection to facilitate on-site charging of tank. The tank shall be fitted with lifting rings and floor mounting skirt for vertical installation. The tank shall be constructed according to section 8 of ASME boiler and pressure vessel code and stamped 125psi working pressure.The contractor shall submit calculation regarding the above data. Pumps shall be of N+1 configuration. including with control wiring
1
-
-
Supply, installation, testing & commissioning of a common air separator on the chilled water return line located at the pump suction and suitable for Secondary pump water flow; the separator shall be complete with high capacity air vent, flanges, service valve, non return valve, isolation butterfly valves for header & makeup water inlet. Capacity suitable for 2880 USGPM and 350 mm NB CHW Header line
1
-
-
AUTO AIR VENTS including Ball Valves:
Supply & install of airvents / purge valves including 15mm Ball Valves at the highest points in chilled water piping complete each floor with pipes nipple welded to pipe, hex nipple, socket, U-pipe connection at outlet of air vent etc. as required.
28
-
-
Supply and fix flexible connections with control rods for pumps and chiller.
Size: 200 mm dia.
24
-
-
TWO WAY TYPE PRESSURE INDEPENDENT BALANCING CUM MODULATING FLOW CONTROL VALVE:
Supply, Installation, testing and commissioning of following size Pressure independent type 2 way modulating flow Control valves in a single Unit of Valves with PN16 Rating. DN 15 to DN 32 Brass Body Ext. Threaded, DN 40 & DN 50 Cast Iron Body Ext. Threaded, DN 65 to DN 100 Cast Iron body, Flanged Ends Connection Duly mounted with a BMS compatible Modulating actuator IP54 Type suitable for 24V AC for AHU/FCU as per specification
65 mm dia.
12
-
-
TWO WAY TYPE PRESSURE INDEPENDENT BALANCING CUM MODULATING FLOW CONTROL VALVE:
Supply, Installation, testing and commissioning of following size Pressure independent type 2 way modulating flow Control valves in a single Unit of Valves with PN16 Rating. DN 15 to DN 32 Brass Body Ext. Threaded, DN 40 & DN 50 Cast Iron Body Ext. Threaded, DN 65 to DN 100 Cast Iron body, Flanged Ends Connection Duly mounted with a BMS compatible Modulating actuator IP54 Type suitable for 24V AC for AHU/FCU as per specification
50 mm dia.
26
-
-
TWO WAY TYPE PRESSURE INDEPENDENT BALANCING CUM MODULATING FLOW CONTROL VALVE:
Supply, Installation, testing and commissioning of following size Pressure independent type 2 way modulating flow Control valves in a single Unit of Valves with PN16 Rating. DN 15 to DN 32 Brass Body Ext. Threaded, DN 40 & DN 50 Cast Iron Body Ext. Threaded, DN 65 to DN 100 Cast Iron body, Flanged Ends Connection Duly mounted with a BMS compatible Modulating actuator IP54 Type suitable for 24V AC for AHU/FCU as per specification
40 mm dia.
16
-
-
TWO WAY TYPE PRESSURE INDEPENDENT BALANCING CUM MODULATING FLOW CONTROL VALVE:
Supply, Installation, testing and commissioning of following size Pressure independent type 2 way modulating flow Control valves in a single Unit of Valves with PN16 Rating. DN 15 to DN 32 Brass Body Ext. Threaded, DN 40 & DN 50 Cast Iron Body Ext. Threaded, DN 65 to DN 100 Cast Iron body, Flanged Ends Connection Duly mounted with a BMS compatible Modulating actuator IP54 Type suitable for 24V AC for AHU/FCU as per specification
32 mm dia.
23
-
-
TWO WAY TYPE PRESSURE INDEPENDENT BALANCING CUM MODULATING FLOW CONTROL VALVE:
Supply, Installation, testing and commissioning of following size Pressure independent type 2 way modulating flow Control valves in a single Unit of Valves with PN16 Rating. DN 15 to DN 32 Brass Body Ext. Threaded, DN 40 & DN 50 Cast Iron Body Ext. Threaded, DN 65 to DN 100 Cast Iron body, Flanged Ends Connection Duly mounted with a BMS compatible Modulating actuator IP54 Type suitable for 24V AC for AHU/FCU as per specification
25 mm dia.
7
-
-
CONDENSER WATER PIPING AND VALVES
-
-
-
Supply, receive, store handle, install, test and commission the condenser water line with GI class (B) IS 3589 pipes complete with all fittings such as bends, tees, elbows, reducers, flanges, special fittings, suspension hangers, structural supports, etc. as reqd. for installation as per site conditions and as per specfiications. Opening as good as same.
450 mm dia.
Note: Wall openings for pipes & ducts, AHU Room and making good of opening to the complete satisfaction, pedestal for equipment are under the scope of HVAC contractor.
300
-
-
Supply, receive, store handle, install, test and commission the condenser water line with GI class (B) IS 3589 pipes complete with all fittings such as bends, tees, elbows, reducers, flanges, special fittings, suspension hangers, structural supports, etc. as reqd. for installation as per site conditions and as per specfiications. Opening as good as same.
200 mm dia.
Note: Wall openings for pipes & ducts, AHU Room and making good of opening to the complete satisfaction, pedestal for equipment are under the scope of HVAC contractor.
110
-
-
Supply, receive, store handle, install, test and commission the condenser water line with GI class (B) IS 3589 pipes complete with all fittings such as bends, tees, elbows, reducers, flanges, special fittings, suspension hangers, structural supports, etc. as reqd. for installation as per site conditions and as per specfiications. Opening as good as same.
125 mm dia.
Note: Wall openings for pipes & ducts, AHU Room and making good of opening to the complete satisfaction, pedestal for equipment are under the scope of HVAC contractor.
100
-
-
Supply, receive, store handle, install, test and commission the condenser water line with GI class (B) IS 3589 pipes complete with all fittings such as bends, tees, elbows, reducers, flanges, special fittings, suspension hangers, structural supports, etc. as reqd. for installation as per site conditions and as per specfiications. Opening as good as same.
100mm dia.
Note: Wall openings for pipes & ducts, AHU Room and making good of opening to the complete satisfaction, pedestal for equipment are under the scope of HVAC contractor.
200
-
-
Supply, installation, testing & commissioning of the following type Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly valves shall be provided with locking devices & PN 16 Rating.
200 mm dia
24
-
-
Supply, installation, testing & commissioning of the following type Butterfly valves as per the specifications and as required. Butterfly valve shall cast iron body with black nitrile seat. All butterfly
valves shall be provided with locking devices & PN 16 Rating.
12 5mm dia
4
-
-
Supply, installation, testing & commissioning of the following Non Return Valves as per the specifications and as required. Non Return valves up to 65mm size shall be of gun metal with screwed female ends.
Valves of 65mm and above shall be of CI with flanged ends. PN 16 pressure rating, EPDM seal. 200 mm dia
4
-
-
Supply, installation, testing & commissioning of the following suction guides as per the specifications and as required
Size: 200 mm dia
4
-
-
Supply and fix flexible connections with control rods for pumps, cooling tower & condenser. Size: 200 mm NB
16
-
-
Supply, installation, testing & commissioning of Balancing Valve, with built in measuring facility with C.I Body, 90 Deg C maximum operating temperature; built-in locking device for Tamper-Proof positioning; flanged connections; Valves shall have connections with isolation device for portable differential pressure meter with integral seals, Flow accuracy shall be 5%(+/-)
Size: 200 mm NB
8
-
-
Supply, installation, testing and commissioning of 4" Dial type thermometers with Stem with Copperplated steel, aluminum, or brass for thermowell installation and of length to suit installation, Stainless Steel U-Siphon and 15mm Brass body ball valve as per specification
16
-
-
16.8 : Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
16
-
-
Supply, installation, testing & commissioning of differential pressure switch as per the specifications and as required.
4
-
-
Supply, installation, testing & commissioning of the following motorized cut off valves as per the specifications and as required. Cl Body, Nylon coated DI disc, EPDM seal, minimum PN-16 pressure rating, conforming to BS 5155, IS 13095, capable of accepting upto 10V DC and upto 20mA electric signal and providing similar transduced feedback output to control system as required.
Size: 200 mm dia
8
-
-
DUCTING, GRILLS, DIFFUSER AND INSULATION
-
-
-
Supply, fabricate, handle, erect, balancing and commissioning of below thickness factory fabricated GSS ducting as per drawing, complete with all fittings such as tee bends, special off-chutes, turning vanes, splitter dampers, ins.doors, transformation pieces, slip on flanges, rubber gaskets, elbows, hangers, supports etc. etc. as reqd. as per IS 655 including suspension and supporting arrangement for plenums, ducts, complete as required. and as per specification.
Thickness 0.63 mm GSS sheet
5775
-
-
Supply, fabricate, handle, erect, balancing and commissioning of below thickness factory fabricated GSS ducting as per drawing, complete with all fittings such as tee bends, special off-chutes, turning vanes, splitter dampers, ins.doors, transformation pieces, slip on flanges, rubber gaskets, elbows, hangers, supports etc. etc. as reqd. as per IS 655 including suspension and supporting arrangement for plenums, ducts, complete as required. and as per specification.
Thickness 0.80 mm GSS sheet
6350
-
-
Supply, fabricate, handle, erect, balancing and commissioning of below thickness factory fabricated GSS ducting as per drawing, complete with all fittings such as tee bends, special off-chutes, turning vanes, splitter dampers, ins.doors, transformation pieces, slip on flanges, rubber gaskets, elbows, hangers, supports etc. etc. as reqd. as per IS 655 including suspension and supporting arrangement for plenums, ducts, complete as required. and as per specification.
Thickness 1.00 mm GSS sheet
1550
-
-
Supply, fabricate, handle, erect, balancing and commissioning of below thickness factory fabricated GSS ducting as per drawing, complete with all fittings such as tee bends, special off-chutes, turning vanes, splitter dampers, ins.doors, transformation pieces, slip on flanges, rubber gaskets, elbows, hangers, supports etc. etc. as reqd. as per IS 655 including suspension and supporting arrangement for plenums, ducts, complete as required. and as per specification.
Thickness 1.25 mm GSS sheet
150
-
-
Supply, fabricate, handle, erect, balancing and commissioning of below thickness factory fabricated Aluminium ducting as per drawing, complete with all fittings such as tee bends, special off-chutes, turning vanes, splitter dampers, ins.doors, transformation pieces, slip on flanges, rubber gaskets, elbows, hangers, supports etc. etc. as reqd. as per IS 655 including suspension and supporting arrangement for plenums, ducts, complete as required. and as per specification.
Thickness 0.80 mm Al. Sheet ducting
1015
-
-
Supply, fabricate, handle, erect, balancing and commissioning of below thickness factory fabricated Aluminium ducting as per drawing, complete with all fittings such as tee bends, special off-chutes, turning vanes, splitter dampers, ins.doors, transformation pieces, slip on flanges, rubber gaskets, elbows, hangers, supports etc. etc. as reqd. as per IS 655 including suspension and supporting arrangement for plenums, ducts, complete as required. and as per specification.
Thickness 1.00 mm Al. Sheet ducting
1825
-
-
Supply, fabricate, handle, erect, balancing and commissioning of below thickness factory fabricated Aluminium ducting as per drawing, complete with all fittings such as tee bends, special off-chutes, turning vanes, splitter dampers, ins.doors, transformation pieces, slip on flanges, rubber gaskets, elbows, hangers, supports etc. etc. as reqd. as per IS 655 including suspension and supporting arrangement for plenums, ducts, complete as required. and as per specification.
Thickness 1.25 mm Al. Sheet ducting
100
-
-
Supply installing, testing and commissioning of fine filters of efficiency 99.9% down to 5 microns in filter plenum in suitable frame work for MRI/CT, Cath Lab:
Fine filters - for MRI 6750 CFM as per dwg
1
-
-
Supply installing, testing and commissioning of fine filters of efficiency 99.9% down to 5 microns in filter plenum in suitable frame work for MRI/CT, Cath Lab:
Fine filters - for Cath 7525 cfm as per dwg
1
-
-
16.15 : Suppluying and Fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.
15
-
-
16.16.a : Supplying and Fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.
40
-
-
Supply and fixing of Square Supply air diffusers of powder coated Aluminium with opposed blade dampers with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600.
SD: 225×225
10
-
-
Supply and fixing of Square Supply air diffusers of powder coated Aluminium with opposed blade dampers with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600.
SD: 300×300
1150
-
-
Supply and fixing of Square Supply air diffusers of powder coated Aluminium with opposed blade dampers with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600.
SD: 375×375
175
-
-
Supply and fixing of Square Supply air diffusers of powder coated Aluminium with opposed blade dampers with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600.
SD: 450×450
1
-
-
Supply and fixing of Square Supply air diffusers of powder coated Aluminium with opposed blade dampers with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600.
SD: 525×525
1
-
-
Supply and fixing of Square Return air diffusers of powder coated Aluminium with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600
RD: 225×225
10
-
-
Supply and fixing of Square Return air diffusers of powder coated Aluminium with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600
RD: 300×300
1200
-
-
Supply and fixing of Square Return air diffusers of powder coated Aluminium with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600
RD: 375×375
195
-
-
Supply and fixing of Square Return air diffusers of powder coated Aluminium with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600
RD: 450×450
1
-
-
Supply and fixing of Square Return air diffusers of powder coated Aluminium with removable core as per drawings for the following neck sizes. The diffusers shall have extended flanges to match the grid tile of 600x600
RD: 525×525
1
-
-
Supply, Fabrication, installation and testing of following size semi rigid insulated flexible duct, complete with connecting rings, duct supports etc. as per standards and specification.
250 mm dia
15
-
-
Supply, Fabrication, installation and testing of following size semi rigid insulated flexible duct, complete with connecting rings, duct supports etc. as per standards and specification.
300 mm dia
1500
-
-
Supply, Fabrication, installation and testing of folloeing size semi rigid insulated flexible duct, complete with connecting rings, duct supports etc. as per standards and specification.
350 mm dia
250
-
-
Supply, Fabrication, installation and testing of the insualted flexible ducting, complete with connecting rings, duct supports, Plenum etc as per standards and specification - for HRW exhaust.
150 mm dia
200
-
-
SITC of following Insulated Plenum Box made of 22g G.I & Spigot & Butterfly Dampers with necessary threaded rods for supporting for the following sizes.
300X300X350H
7
-
-
SITC of following Insulated Plenum Box made of 22g G.I & Spigot & Butterfly Dampers with necessary threaded rods for supporting for the following sizes.
350X350X450H
1007
-
-
SITC of following Insulated Plenum Box made of 22g G.I & Spigot & Butterfly Dampers with necessary threaded rods for supporting for the following sizes
450X450X450H
153
-
-
SITC of following Insulated Plenum Box made of 22g G.I & Spigot & Butterfly Dampers with necessary threaded rods for supporting for the following sizes
600X600X450H
1
-
-
SITC of following Insulated Plenum Box made of 22g G.I & Spigot & Butterfly Dampers with necessary threaded rods for supporting for the following sizes
600X150X450H
1
-
-
SITC of Factory made fresh air dampers with louvers and control lever, filter etc as required. (as per drawing)
16
-
-
SITC of Factory made fresh air dampers having 20 micron filter with louvers and control lever. (for OT as per drawing)
3
-
-
Supply, fix, balance and commissioning of louvre type smooth supply air duct dampers made of extruded aluminium linkage, lever, brass bushings complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges, fixing arrangement etc, as per specifications.
Al. volume control duct damper
50
-
-
Supply and fix 1 1/2 hour fire rated fire dampers air ducts (main line) with fusible link & microswitch to shut of corresponding AHU (including control cable.)
45
-
-
VAV (Variable Air Volume) unit:
SITC of VAVs of following CFMs for supply air in rectangular ducts including thermostat and controls. Casing and damper blade made of galvinized sheet steel with proper seal and polyurethane plain bearings. Sensor tubes should be aluminium, maintenance free damper blade with minimum leakage rate. Actuator suitable for AC 24V 50 Hz and rated for dust pressure upto 50mm water gauge.
VAV - 1400 cfm
2
-
-
VAV (Variable Air Volume) unit:
SITC of VAVs of following CFMs for supply air in rectangular ducts including thermostat and controls. Casing and damper blade made of galvinized sheet steel with proper seal and polyurethane plain bearings. Sensor tubes should be aluminium, maintenance free damper blade with minimum leakage rate. Actuator suitable for AC 24V 50 Hz and rated for dust pressure upto 50mm water gauge.
VAV - 1600 cfm
1
-
-
VAV (Variable Air Volume) unit:
SITC of VAVs of following CFMs for supply air in rectangular ducts including thermostat and controls. Casing and damper blade made of galvinized sheet steel with proper seal and polyurethane plain bearings. Sensor tubes should be aluminium, maintenance free damper blade with minimum leakage rate. Actuator suitable for AC 24V 50 Hz and rated for dust pressure upto 50mm water gauge.
VAV - 2000 cfm
3
-
-
VAV (Variable Air Volume) unit:
SITC of VAVs of following CFMs for supply air in rectangular ducts including thermostat and controls. Casing and damper blade made of galvinized sheet steel with proper seal and polyurethane plain bearings. Sensor tubes should be aluminium, maintenance free damper blade with minimum leakage rate. Actuator suitable for AC 24V 50 Hz and rated for dust pressure upto 50mm water gauge.
VAV - 2800 cfm
3
-
-
VAV (Variable Air Volume) unit:
SITC of VAVs of following CFMs for supply air in rectangular ducts including thermostat and controls. Casing and damper blade made of galvinized sheet steel with proper seal and polyurethane plain bearings. Sensor tubes should be aluminium, maintenance free damper blade with minimum leakage rate. Actuator suitable for AC 24V 50 Hz and rated for dust pressure upto 50mm water gauge.
VAV - 3000 cfm
4
-
-
VAV (Variable Air Volume) unit:
SITC of VAVs of following CFMs for supply air in rectangular ducts including thermostat and controls. Casing and damper blade made of galvinized sheet steel with proper seal and polyurethane plain bearings. Sensor tubes should be aluminium, maintenance free damper blade with minimum leakage rate. Actuator suitable for AC 24V 50 Hz and rated for dust pressure upto 50mm water gauge.
VAV - 3200 cfm
1
-
-
Thermal Insulation (Conditioned area):
Supply and fixing of 8 / 9mm thick Class O nitrile rubber insulation with in-built lifetime anti microbial protection. Insulation density shall be 40 - 55 Kg/m3. Insulation shall be FM and EPA approved. Thermal conductivity to be 0.033 @ 0 deg C mean temperature and water vapour diffusion resistance should be 10000 without any external vapour barrier. Adhesive should be from the same manufacturer.
9000
-
-
Acoustic Insulation : Supply and fixing of 10mm thick Class 1 open cell nitrile rubber insulation with inbuilt lifetime anti microbial protection. Insulation density shall be 140 - 180 Kg/m3. Material shall be EPA approved.
2500
-
-
Thermal Insulation (Non-Conditioned area): Supply and fixing of 18 / 19mm thick Class O nitrile rubber insulation with in-built lifetime anti microbial protection. Insulation density shall be 40 - 55 Kg/m3. Insulation shall be FM and EPA approved. Thermal conductivity to be 0.033 @ 0 deg C mean temperature and water vapour diffusion resistance should be 10000 without any external vapour barrier. Adhesive should be from the same manufacturer
5000
-
-
VENTILATION SYSTEM
-
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
6000 cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
5500 cfm Exhaust Blower
2
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
4000 cfm Exhaust Blower
3
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
3750 cfm Exhaust Blower
2
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
3400 cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
3250 cfm Exhaust Blower
3
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
2750 cfm Exhaust Blower
3
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
2500 cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
2000 cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
1850 cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
1500 cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
1350 cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
1250cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
1150cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
1000cfm Exhaust Blower
10
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
900cfm Exhaust Blower
2
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
850cfm Exhaust Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
800cfm Exhaust Blower
5
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
750cfm Exhaust Blower
8
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
700cfm Exhaust Blower
2
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
650cfm Exhaust Blower
12
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
600cfm Exhaust Blower
8
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
550cfm Exhaust Blower
5
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
500cfm Exhaust Blower
6
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
450cfm Exhaust Blower
2
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
400cfm Exhaust Blower
5
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
350cfm Exhaust Blower
10
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
300cfm Exhaust Blower
5
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
250cfm Exhaust Blower
12
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
200cfm Exhaust Blower
11
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
150cfm Exhaust Blower
42
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
100cfm Exhaust Blower
22
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
80cfm Exhaust Blower
63
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
2750 CFM Fresh air Blower
1
-
-
Axial Fans - for Toilet, Plant room exhaust & Fresh Air:
Supply, installation, testing and commissioning Direct driven axial flow fans suitable for mounting on wall or duct in standard galvanized/ powder coated steel construction with required rating, static, single motor and flexible connection to connect with ducting / plenum, louvers with birdscreen
1800 CFM Fresh air Blower
1
-
-
VENTILATION SYSTEM (AHU SECTION):
Pre-Plasticised Sheet/ powder coated , Extruded Aluminium panta post frame work with fan section TEFC sq.cage induction motor of required rating including mounting and fixing arrangements DIDW Centrifugal fan and motor pulley, V-belts and belt guard, and anti vibration springs/ isolator bearings etc. Insulation of all section with fire retardant insulation material as per manufactures standard.
Accessories such as: Double canvas connections of fire retardant quality for connecting unit's to ducting/plenum.
Double inlet Double width Centrifugal backward curved Exhaust fans (100 mm static):
17000 cfm Exhaust blower with Air washer water base - kitchen
1
-
-
VENTILATION SYSTEM (AHU SECTION)
Pre-Plasticised Sheet/ powder coated , Extruded Aluminium panta post frame work with fan section TEFC sq.cage induction motor of required rating including mounting and fixing arrangements DIDW Centrifugal fan and motor pulley, V-belts and belt guard, and anti vibration springs/ isolator bearings etc. Insulation of all section with fire retardant insulation material as per manufactures standard.
Accessories such as: Double canvas connections of fire retardant quality for connecting unit's to ducting/plenum.
Double inlet Double width Centrifugal backward curved Exhaust fans (100 mm static):
11000 cfm Exhaust blower - Laundry
1
-
-
VENTILATION SYSTEM (AHU SECTION)
Pre-Plasticised Sheet/ powder coated , Extruded Aluminium panta post frame work with fan section TEFC sq.cage induction motor of required rating including mounting and fixing arrangements DIDW Centrifugal fan and motor pulley, V-belts and belt guard, and anti vibration springs/ isolator bearings etc. Insulation of all section with fire retardant insulation material as per manufactures standard.
Accessories such as: Double canvas connections of fire retardant quality for connecting unit's to ducting/plenum.
Freshair fan (50 mm static)
7750 cfm Fresh air blower
2
-
-
VENTILATION SYSTEM (AHU SECTION)
Pre-Plasticised Sheet/ powder coated , Extruded Aluminium panta post frame work with fan section TEFC sq.cage induction motor of required rating including mounting and fixing arrangements DIDW Centrifugal fan and motor pulley, V-belts and belt guard, and anti vibration springs/ isolator bearings etc. Insulation of all section with fire retardant insulation material as per manufactures standard.
Accessories such as: Double canvas connections of fire retardant quality for connecting unit's to ducting/plenum.
Freshair fan (50 mm static):
9750 cfm Fresh air blower
1
-
-
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Factory fabricated GSS sheet metal rectangular ducting as per IS 655- 2006
Thickness 0.80mm Sheet
225
-
-
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. Factory fabricated GSS sheet metal rectangular ducting as per IS 655- 2006.
Thickness 0.63mm Sheet
1550
-
-
FIRE DAMPERS Supply and fix 2 hour fire rated UL555 fire dampers with fusible link & microswitch including control cable.
5
-
-
Supply, Fabrication, installation and testing of the flexible ducting, complete with connecting rings, duct supports, Plenum etc as per standards and specification.
Size: 100mm dia.
1500
-
-
Supply and fix the following grilles and diffusers as per specifications. Machine made, powder coated, supply and return air grills and diffusers. Design to be approved (material : Aluminium)
Supply air grille/diffuser with vcd
5
-
-
Supply and fix the following grilles and diffusers as per specifications. Machine made, powder coated, supply and return air grilles and diffusers. Design to be approved (material : Aluminium)
Return air grille/diffuser with vcd
38
-
-
ADDITIONAL WORKS
-
-
-
Acoustic lining of AHU Rooms :
Supply and fixing of 19/20 mm thick Class 1 open cell nitrile rubber insulation with in-built lifetime anti microbial protection. Insulation density shall be 140 - 180 Kg/m3. Material shall be EPA approved.
50
-
-
Thermal Insulation (Under deck):
Supply and fixing of 19mm thick Class O nitrile rubber insulation. Insulation density shall be 40 - 55 Kg/m3. Thermal conductivity to be 0.035 @ 0 deg C mean temperature and water vapour diffusion resistance should be 7000 without any external vapour barrier. Adhesive should be from the same manufacturer.
5000
-
-
Roof(inside) insulation for exposed slabs/walls:
Supply & fixing of 12 mm thick class O nitrile rubber insulation with adhesive as per the recommendation of the manufacture with density 45-55kg/m3
2500
-
-
CHEMICAL WATER TREATMENT FOR CONDENSER WATER-(open loop):
Automatic type Chemical dosing system, for condenser water piping system as per specification and drawing.
Total package of flushing, chemical pre-cleaning, passivation and continuous maintenance treatment wih chemicals etc with necessary permanently installed equipments and its controls. This package includes initial analysing of make up water sample.Then programming methods and duration. Accordingly, supply, install, test commission and maintain for a specified period with dosing pumps, tanks, water meters corrosion coupon tanks, valves with required chemicals and its micro-processor based controller with program etc as per specification.Maintaining the clean piping system without corrosion, scale or microbiological activity for an optimum operational efficiency and handing over the entire system in a healthy condition at the end of the contract which is the suppliers responsibility.
1
-
-
AIR CURTAIN for Entry & Exit:
Supply, installing, testing and commissioning of air curtains with GI coated covering, controller & door sensors, all required accessories, maximum velocity (11 m/s), 2 meter wide horizontal air curtains, maximum throw level upto 4mtr of the door height, energy efficient 1phase EC motors & have IP protection 20. The cost shall also include necessary stainless steel / Powder coated MS supports if required.
22
-
-
ELECTRICAL WORKS
-
-
-
MAIN PUMP PANEL 1
Fabrication, supply, erection, testing and commissioning of Type Tested Assembly (TTA) cubicle type (panel and all switch gears should be type tested and certification should be submitted) as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor mounted, front operated MV panel board made out of 14SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. The panel shall complete with incomer & outgoing, Bus Bar Chamber, Volt Meter, Ammeter, fully automatic Star / delta / DOL starters for pumps as per the approved drawing & technical specification, Contactors, Auxiliary contacts, Indicating Lamps, Fuses, Auto / Manual Selector Switches, Manual On / Off Buttons, all internal wiring etc. as per the approved drawing and technical specification. The price for control panel shall be inclusive of all control cabling for functioning as per the design requirement and Earthing of the panel, all as per Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions. The panel shall be BMS compactible and CPRI approved.
Incomer - 400A, 25/36 kA, FP thermal magnetic release MCCB + Energy Meter with all accessories - 1 Set.
400A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc. complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/ kVAh
Outgoings:
250A, 25kA, TP, Thermal Magnetic release MCCB- 2 Nos.
50A, 16kA, TP, Thermal Magnetic release MCCB + Starter + Accessories - 4 Set.
50A, 16kA, TP, Thermal Magnetic release MCCB as spare - 1 No.
1
-
-
MAIN PUMP PANEL 2
Fabrication, supply, erection, testing and commissioning of Type Tested Assembly (TTA) cubicle type (panel and all switch gears should be type tested and certification should be submitted) as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. The panel shall complete with incomer & outgoing, Bus Bar Chamber, Volt Meter, Ammeter, fully automatic Star / delta / DOL starters for pumps as per the approved drawing & technical specification, Contactors, Auxiliary contacts, Indicating Lamps, Fuses, Auto / Manual Selector Switches, Manual On / Off Buttons, all internal wiring etc. as per the approved drawing and technical specification. The price for control panel shall be inclusive of all control cabling for functioning as per the design requirement and Earthing of the panel, all as per Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions. The panel shall be BMS compactible and CPRI approved.
Incomer - 400A, 25/36 kA, FP thermal magnetic release MCCB + Energy Meter with all accessories - 1 Set.
400A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc. complete as required.
Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
Outgoings:
100A, 16kA, TP, Thermal Magnetic
release MCCB + Starter + Accessories - 4 Set.
100A, 16kA, TP, Thermal Magnetic release MCCB as
spare - 1 No.
50A, 16kA, TP, Thermal Magnetic release MCCB + Starter + Accessories - 4 Set.
50A, 16kA, TP, Thermal Magnetic release MCCB as spare - 1 No.
1
-
-
PUMP PANEL - SECONDARY PUMPS
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor mounted, front operated MV panel board made out of 14SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as shown in the schematic drawing. All opening parts of the panel shall be sealable. The panel shall complete with incomer & outgoing, Bus Bar Chamber, Volt Meter, Ammeter, fully automatic VFD with PLC for pumps as per the approved drawing & technical specification, necessary contactors, Auxiliary contacts, Indicating Lamps, Fuses, Auto / Manual Selector Switches, Manual On / Off Buttons, all internal wiring etc. as per the approved drawing and technical specification. The price for control panel shall be inclusive of all control cabling for functioning as per the design requirement and Earthing of the panel, all as per Technical Specifications, Prevailing Rules, Standards, Requirement and Site Conditions. The panel shall be BMS compactible and CPRI approved.
Incomer - 250A, 25kA, FP thermal magnetic release MCCB - 1 No.
250A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc. complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency, Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
Variable Frequency Drive complete with VSPS control consisting of adjustable frequency drive (AFD) for each pump, one dedicated microprocessor based pump logic controller per zone housed within this enclosure panel with parallel pumping software duly down loaded and single / multiple differential pressure sensor / transmitters as per the site requirement. The entire system along with secondary pumps as described above must be sourced from single manufacturer only, to ensure unit responsibility.
The VFD should be incorporated with RFI (radio frequency interface) filters which can control THDi [Total Harmonic Distortion Current] below 5% with auto bypass starter system for all pumps sets including starter and associated control network. The system shall be compatible to the third party bms operation. The system inclusive of necessary isolation with all accessories, connections and interconnections complete set for 4 pumps of 30 HP.
1
-
-
AHU PANEL / SM DB 1:
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 63A, FP, MCCB Isolator.
63A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL , Thermal Magnetic release MCCB - 4 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 2
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 125A, FP,
MCCB Isolator - 1 No.
125A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 8 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 3
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 125A, FP, MCCB Isolator - 1 No.
125A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 11 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 4
Fabrication, supply, erection, testing and commissioning of cubicle type as
per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front
operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully
compartmentalised complete with hinged and earthed front doors with name plate, danger notice board,
heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all
components as required. All opening parts of the panel shall be sealable. Incomer - 63A, FP, MCCB
Isolator - 1 No.
63A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh.
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 7 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 5
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 80A, FP, MCCB
Isolator - 1 No.
80A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 7 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 6
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 63A, 25kA, FP, thermal magnetic release MCCB - 1 No.
63A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 4 Nos.
Supply, Installation, testing and commissioning
2
-
-
AHU PANEL / SM DB 7
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 32A, 25kA, FP, thermal magnetic release MCCB - 1 No.
32A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 4 Nos.
Supply,Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 8
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 32A, 25kA, FP, thermal magnetic release MCCB - 1 No.
32A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours,
site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
6-10A, TP+NL, MCB - 4 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 9
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 100A, FP, MCCB Isolator - 1 No.
100A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 7 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 10
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 63A, 25kA, FP, thermal magnetic release MCCB - 1 No.
63A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 4 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 11
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer -63A, FP, MCCB Isolator - 1 No.
63A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings
6A, TP+NL MCB - 1 Nos.
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 4 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 12
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 50A, 25kA, FP, thermal magnetic release MCCB - 1 No.
50A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours,
site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1
Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 3 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 13
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 100A, FP, MCCB Isolator - 1 No.
100A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 7 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 14
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer -50A, FP, MCCB Isolator - 1 No.
50A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
6-10A, TP+NL MCB - 2 Nos.
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 3 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 15
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 50A, 25kA, FP, thermal magnetic release MCCB - 1 No.
50A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking
arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 4 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 16
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 80A, FP, MCCB Isolator - 1 No.
80A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
6-10A, TP+NL MCB - 2 Nos.
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 5 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 17
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 125A, FP, MCCB Isolator - 1 No.
125A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
6-10A, TP+NL, MCB - 1 No.
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB -13 Nos. Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 18
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 160A, FP, MCCB Isolator - 1 No.
160A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
6-10A, TP+NL MCB - 1 Nos.
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 11 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 19
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 63A, 25kA, FP, thermal magnetic release MCCB - 1 No.
63A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
6-10A, TP+NL MCB - 1 No.
16-63A, 16kA, TP+NL, Thermal Magnetic release
MCCB - 4 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 20
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 160A, FP, MCCB Isolator - 1 No.
160A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 13 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 21
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 63A, FP, MCCB Isolator - 1 No.
63A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh.
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 4 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 22
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 63A, FP, MCCB Isolator - 1 No.
63A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh.
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 4 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 23
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 200A, FP, MCCB Isolator - 1 No.
200A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 16 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 24
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 14 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 200A, FP, MCCB Isolator - 1 No.
200A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 17 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 25
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 16 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 160A, FP, MCCB Isolator - 1 No.
160A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
6-10A, TP+NL, MCB - 12 Nos.
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 12 Nos.
Supply, Installation, testing and commissioning
1
-
-
AHU PANEL / SM DB 26
Fabrication, supply, erection, testing and commissioning of cubicle type as per IEC 61439 and internal arc test as per IEC 61641, dust and vermin proof, floor/wall mounted, front operated MV panel board made out of 16 SWG thick CRCA sheet (7 tank treatment) fully compartmentalised complete with hinged and earthed front doors with name plate, danger notice board, heavy duty rubber gaskets, removable gland plates made out of 3mm thick sheet steel including all components as required. All opening parts of the panel shall be sealable. Incomer - 125A, FP, MCCB Isolator - 1 No.
125A 433V, best conductivity extensible Al TPN bus bar with SMC supports, heat shrinkable sleeves etc complete as required. Necessary interlocking arrangement.
Multi function digital LED meters with accuracy class 1, with necessary CT and accessories for measuring Voltage, current, Frequency,Power Factor, kW, kVA, Old energy, On hours, site selectable kWh/kVAh
RYB phase indicating LED lamps with control fuses and switches - 1 Set.
Outgoings:
6-10A, TP+NL MCB - 1 Nos.
16-63A, 16kA, TP+NL, Thermal Magnetic release MCCB - 9 Nos.
Supply, Installation, testing and commissioning
1
-
-
Supply and fixing of following DP/FP 230/415V, isolators in sheet steel powder coated enclosure with door interlock on surface/recess mounted confirming to IEC 60947-3 complete with all accessories, connections, testing and commissioning etc. as required and as instructed by engineer in charge also making good any damages made during installation.
16/25/32/40 A FP Isolator with enclosure
108
-
-
Supplying and fixing of Lockable off push button for pumps & CT
16
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) ammended upto date.
3.5 core 185 sq.mm Al. cables
24
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) amended upto date. 3 core 25 sq.mm Al. cables
691
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) amended upto date.
3 core 10 sq.mm Al. cables
1104
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) amended upto date. 4 core 10 sq.mm Al. cables
90
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) amended upto date. 4 core 4 sq.mm Al. cables
4560
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Aluminium conductor, A2XFY power cable confirming to IS 7098 (part 1) amended upto date. 4 core 6 sq.mm Al. cables
585
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) amended upto date.
6 core x 1.5 sq.mm copper cable
500
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) amended upto date. 3 core x 1.5 sq.mm shielded armoured cable
200
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) amended upto date.
3 core x 1.5 sq.mm copper cable
898
-
-
Supply of the following size 1.1kV grade XLPE insulated PVC sheathed, armoured Copper conductor 2XFY power cable confirming to IS 7098 (part 1) amended upto date.
2 core x 1.5 sq.mm copper cable
300
-
-
9.1.27 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 1/2X 185 sq. mm (57mm)
2
-
-
9.1.9 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 25 sq. mm (25mm)
32
-
-
9.1.7 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.3 X 10 sq. mm (22mm)
32
-
-
9.1.32 : Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)
2
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4C X 6 sq. mm
36
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
4C X 4 sq. mm
276
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
3C X 1.5 sq. mm
32
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
2C X 1.5 sq. mm
28
-
-
Supplying and making end termination with brass compression gland and Copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required.
6C X 1.5 sq. mm
226
-
-
7.8.1 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle)
8950
-
-
7.8.3 : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
24
-
-
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required
4 mm copper conductor ( 8 SWG)
100
-
-
Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required 3.15 mm copper conductor ( 10 SWG)
4342
-
-
Supply and clamping the following size of strips on surface of wall/ parapet/ existing cable tray using clamps fabricated from 25 X 3 mm GI flat duly painted or heavy duty GI spacer saddles spacing of clamps not exceeding 1 m, making good the damages, colour washing etc. as required (for horizontal run) 25 x 3 mm copper strip
200
-
-
BUILDING MANAGEMENT SYSTEM
-
-
-
SITC of Central core Computer - PC (Intel i7 Processor ) , 8 GB RAM, 2 GB Graphics card, DVD Writer, 22" LED monitor, 1 TB HDD, Microsoft mouse, Keyboards, 2 serial, 1 parallel port/KB, Windows 8 operating system , antivirus software
1
-
-
SITC of A4 Colour Laser printer
1
-
-
SITC of System Controller to interface field level controllers to IBMS Workstation
1
-
-
Supply, Installation, Testing and Commissioning of Building Management System Graphic User Interface software with 3 user client license, user groups, user profiles and scopes, alarm handling, scheduling, trending, reporting engine, database system, system activity log, historical data management, real time zoom enabled vector graphics, system backup and restore, HTML based documentation and help, SMS/Email facility complete in all respects as per tender specification. Graphical Software complete to cater to hardware points as specified in the Data Point Summary as well as Third Party Software Integrated Systems. Interface for integrating Third Party Systems. (All Systems to provide data on MODBUS RTU with values shown on MODSCAN or BacNET shown on BacNET explorer)
Chiller System - 5 Chiller (50 points/chiller)
1
-
-
Supply, Installation, Testing and Commissioning of Building Management System Graphic User Interface software with 3 user client license, user groups, user profiles and scopes, alarm handling, scheduling, trending, reporting engine, database system, system activity log, historical data management, real time zoom enabled vector graphics, system backup and restore, HTML based documentation and help, SMS/Email facility complete in all respects as per tender specification. Graphical Software complete to cater to hardware points as specified in the Data Point Summary as well as Third Party Software
Integrated Systems. Interface for integrating Third Party Systems. (All Systems to provide data on MODBUS RTU with values shown on MODSCAN or BacNET shown on BacNET explorer)
Secondary Pumps System (10 Points/Pump)
1
-
-
Supply, Installation, Testing and Commissioning of Building Management System Graphic User Interface software with 3 user client license, user groups, user profiles and scopes, alarm handling, scheduling, trending, reporting engine, database system, system activity log, historical data management, real time zoom enabled vector graphics, system backup and restore, HTML based documentation and help, SMS/Email facility complete in all respects as per tender specification. Graphical Software complete to cater to hardware points as specified in the Data Point Summary as well as Third Party Software Integrated Systems. Interface for integrating Third Party Systems. (All Systems to provide data on MODBUS RTU with values shown on MODSCAN or BacNET shown on BacNET explorer)
Variable Frequency Drives for AHU's (10 Points per VFD)
1
-
-
SITC of Networkable DDC Controllers as per Data Point Summary (1- 5 ) with enclosure with all necessary wiring and accessories
1
-
-
SITC of Immersion Type Temperature Sensor
4
-
-
SITC of Outside Air Temperature & RH Sensor
1
-
-
SITC of Level Switch for expansion tank ( 2 point) (depth of tank - 1 mtr.)
1
-
-
SITC of Differential Pressure Switch
8
-
-
SITC of Level Switch for cooling tower
4
-
-
Supply, Installation, testing & commissioning of the DDC Controllers with enclosure with all necessary wiring and accessories, consider 2 AHU / DDC
25
-
-
Supply, Installation, testing & commissioning of the DDC Controllers with enclosure with all necessary wiring and accessories, consider 1 AHU / DDC
16
-
-
SITC of Differential Pressure Switch across filter
28
-
-
SITC of Return air Temperature Sensor
28
-
-
SITC of Differential Pressure Switch across filter
3
-
-
SITC of Return air Temperature Sensor
3
-
-
SITC of RH Sensor Room type
3
-
-
SITC of Differential Pressure Switch across filter - pre filter and fine filter
56
-
-
SITC of Return air Temperature Sensor
28
-
-
SITC of Differential Pressure Switch across filter - pre filter and fine filter
8
-
-
SITC of Return air Temperature Sensor
4
-
-
SITC of RH Sensor Room type
4
-
-
Supply, Installation, testing & commissioning of the DDC Controllers with enclosure with all necessary wiring and accessories, consider 1 AHU / DDC - For OT
18
-
-
SITC of Differential Pressure Switch across filter -Pre filter,fine filter and Hepa filter
54
-
-
SITC of Return air Temperature Sensor
18
-
-
SITC of RH Sensor Room type
5
-
-
Supply, Installation, testing & commissioning of the DDC Controllers with enclosure with all necessary wiring and accessories, consider 1 AHU / DDC
3
-
-
SITC of Differential Pressure Switch across filter
3
-
-
SITC of Return air Temperature Sensor
3
-
-
SITC of RH Sensor
3
-
-
SITC of Flexible Bare Copper Conductor, PVC Insulated, Cross Laid Up, Overall Aluminium Mylar Tape Shielded along with ATC Drain Wire PVC Outer Sheath BMS Cables - 2 Core 1.0 sq.mm. shielded FRLS armoured cable
3000
-
-
SITC of Flexible Bare Copper Conductor, PVC Insulated, Cross Laid Up, Overall Aluminium Mylar Tape Shielded along with ATC Drain Wire PVC Outer Sheath BMS Cables - 4 Core 1.0 sq.mm. shielded FRLS armoured cable
8500
-
-
SITC of Flexible Bare Copper Conductor, PVC Insulated, Cross Laid Up, Overall Aluminium Mylar Tape Shielded along with ATC Drain Wire PVC Outer Sheath BMS Cables- 8 Core 1.0 sq.mm. shielded FRLS armoured cable
5000
-
-
SITC of Communication Cabling - 2 Core 1.5 sq.mm. shielded FRLS armoured cable or CAT5E/CAT6 armoured cable
5000
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness
1800
-
-
SITC of Power Cable - 3 C x 2.5 Sq.mm., ATC Armoured Cable
1800
-
-
1.31 : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
84
-
-
Medical Gas Pipeline System (MGPS)
-
-
-
SITC of Oxygen Manifold - 2 banks x 12 cylinders, as per technical specifications.
2
-
-
SITC of Fully Automatic Oxygen Control Panel with minimum flow rate of 2000 LPM, BMS compatible; as per technical specifications - Imported.
2
-
-
SITC of Emergency Oxygen Manifold - 2 banks x 5 cylinders, as per technical specifications.
2
-
-
Oxygen Flow meters with humidifier bottle.
250
-
-
SITC of Nitrous Oxide Manifold - 2 banks x 4 cylinders, as per technical specifications.
1
-
-
SITC of Fully automatic Gas Control Panel for Nitrous Oxide with a minimum flow rate of 500 LPM, BMS compatible; as per technical specifications
1
-
-
SITC of Nitrous Oxide Manifold (Emergency) - 1 bank x 2 cylinders, as per technical specifications
1
-
-
SITC of Carbon Dioxide Manifold - 2 banks x 2 cylinders, as per technical specifications.
1
-
-
SITC of Fully automatic Gas Control Panel for Carbon Di Oxide with minimum flow rate of 500 LPM as per technical specifications.
1
-
-
SITC of Carbon Dioxide Manifold (Emergency) - 1 bank x 2 cylinders, as per technical specifications
1
-
-
SITC of Compressed air plant complete with - 3 screw compressors, each compressor should have minimum free air delivery of 3000 LPM, 2 air receiver, medical air duplex drier system (heatless type) with air purification system to ensure medical air quality as per European Pharmacopeia, pressure reducing station, control panel, automatic drain valves, ball valves etc. and as per technical specifications. 1 air receiver Tank capacity 2000 Ltr
1
-
-
SITC of Vacuum plant complete with 3 rotary vane type vacuum pumps, each vacuum pump should have minimum free air aspirated of 3000 LPM at 450 mmHg, 1 vacuum receiver, secretion trap, bacteria double filter, control panel, ball valves etc. ( ISO 10524-2, ISO 7396-1:2016/ISO, 7396-2/HTM02-01). 1 Vacuum receiver Tank capacity 2000 Ltr .
1
-
-
SITC of Ward Vacuum Units
250
-
-
SITC of Theatre Vacuum Units
8
-
-
SITC of ICU Terminal Unit - O2
640
-
-
SITC of ICU Terminal Unit - N2O
1
-
-
SITC of ICU Terminal Unit - Air
320
-
-
SITC of ICU Terminal Unit - Air 7 bar
1
-
-
SITC of ICU Terminal Unit - VAC
636
-
-
SITC of ICU Terminal Unit - CO2
1
-
-
SITC of Ward Terminal Unit - O2
309
-
-
SITC of Ward Terminal Unit - N2O
8
-
-
SITC of Ward Terminal Unit - Air
8
-
-
SITC of Ward Terminal Unit - Air 7 bar
4
-
-
SITC of Ward Terminal Unit - Vac
309
-
-
SITC of Matching Probe for ICU - O2
640
-
-
SITC of Matching Probe for ICU - N2O
1
-
-
SITC of Matching Probe for ICU - Air
320
-
-
SITC of Matching Probe for ICU - Air 7 bar
1
-
-
SITC of Matching Probe for ICU - VAC
636
-
-
SITC of Matching Probe for ICU - CO2
1
-
-
Matching Probe for Wards - O2
309
-
-
Matching Probe for Wards - N2O
8
-
-
Matching Probe for Wards - Air
8
-
-
Matching Probe for Wards - 7 bar
4
-
-
Matching Probe for Wards - VAC
309
-
-
SITC of Master Plant Alarm Panel (post source), as per technical specifications - Imported
1
-
-
SITU of AVSU &Alarm systems - 6 Services 1 O2, 1M air, 1 N2O, 1 S air, 1 CO2 &1 Vac - Imported.
18
-
-
SITU of AVSU & Alarm systems - 4 Services 1 O2,1 N20, 1 M Air and 1 Vac - Imported
3
-
-
SITU of AVSU &Alarm systems - 4 Services 2 O2,1 1 M Air and 1 Vac - Imported
38
-
-
SITU of AVSU &Alarm systems - 3 Services 1 O2,1 M Air and 1 Vac - Imported
2
-
-
SITU of AVSU &Alarm systems - 2 Services 1 O2 and 1 Vac - Imported
24
-
-
SITC - Copper pipe - 12mm
3461
-
-
SITC - Copper pipe - 15mm
5480
-
-
SITC - Copper pipe - 22mm
5862
-
-
SITC - Copper pipe - 28mm
2242
-
-
SITC - Copper pipe - 35mm
620
-
-
SITC - Copper pipe - 42mm
106
-
-
SITC - Copper pipe - 54mm
315
-
-
SITC - Copper pipe - 76mm
105
-
-
SITC - Copper pipe - 108mm
61
-
-
SITC - Ball Valves - 15mm
16
-
-
SITC - Ball Valves - 22mm
15
-
-
SITC - Ball Valves - 28mm
13
-
-
SITC - Ball Valves - 35mm
20
-
-
SITC - Ball Valves - 42mm
10
-
-
SITC - Ball Valves - 54mm
10
-
-
SITC - Ball Valves - 76mm
2
-
-
SITC - Ball Valves - 108mm
2
-
-
SITC of Bed head Panels as per technical specifications.
651
-
-
SITC of Bed Head Units - 1500 mm as per technical specifications.
299
-
-
SITC of Rigid Pendent of column length 1000mm for ICU as per technical specifications.
21
-
-
Pneumatic Tube System
-
-
-
Supply, Installation, testing and commissioning of PTS control units and sub components,control Softwares and Licenses for 3 zone system and RFID as per technical specifications. - Imported.
1
-
-
Supply, Installation, testing and commissioning of PTS control Computer and sub components for 3 zone system as per technical specifications.
1
-
-
Supply, Installation, testing and commissioning of Grey colour PTS Distribution tube OD 110 mm as per technical specifications (also meeting DIN 6660 / 6661 / 8061 / 8062 - Imported ).
820
-
-
Supply, Installation, testing and commissioning of PVC Grey colour 90 degree Bend OD 110 mm with 2.3 mm thickness, , as per technical specifications (also meeting DIN 6660 / 6661 / 8061 / 8062- Imported).
140
-
-
Supply, Installation, testing and commissioning of PVC Transparent Straight tube OD 110 mm with 2.3 mm thickness, 5000mm length as per technical specifications (also meeting DIN 6660 / 6661 / 8061 / 8062 - Imported).
30
-
-
Supply, Installation, testing and commissioning of PVC Transparent 90 degree Bend OD 110 mm with 2.3 mm thickness, as per technical specifications (also meeting DIN 6660 / 6661 / 8061 / 8062 - Imported).
25
-
-
Supply, Installation, testing and commissioning of DC power supply units, Control Cable Data-Com-Power Composite, Cable tie and sub components for system power distribution - (Imported).
1
-
-
Supply, Installation, testing and commissioning of Fully automatic, microprocessor controlled Intermediate / Pass through stations 110 mm with optical sensors for carrier tracking as per technical specifications -(Imported).
16
-
-
Supply, Installation, testing and commissioning of Fully automatic, microprocessor controlled End stations 110 mm with optical sensors as per technical specifications. -(Imported).
3
-
-
Supply, Installation, testing and commissioning of Fully automatic, microprocessor controlled Multi Sending Lab stations 110 mm with RFID Transponder readers and optical sensors as per technical specifications. - (Imported).
1
-
-
Supply, Installation, testing and commissioning of Fully automatic, microprocessor controlled LAB Receiving stations 110 mm with optical sensors, Carrier receiving rail and Rail Extension, as per technical specifications. - (Imported).
1
-
-
Supply, Installation, testing and commissioning of PTS 110 mm Swivel Caps Carriers with 2 RFID tags as per technical specifications. - (Imported)
60
-
-
Supply, Installation, testing and commissioning PTS 3 way/4 way Diverters 110 mm as per technical specifications.
6
-
-
Supply, Installation, testing and commissioning PTS transfer diverters 3 way/4 way Diverters 110 mm as per technical specifications.
3
-
-
Supply, Installation, testing and commissioning of PTS 3-Phase Blower unit including Starter unit, Air Reversing unit and sub components for 110 mm each line as per technical specifications. - (Imported).
3
-
-
Vertical Transportation System (Lift Works)
-
-
-
26 Passenger cum Bed Lifts;LIFT-8,9,10,11;Design, manufacture, supply, installation at site, testing, commissioning of Passenger cum Bed Lift to carry 26 (Twenty Six) persons capacity of load 1768 Kgs with a minimum speed of 1.5 metre per second as per the detailed specification attached including all necessary safety features and in accordance with the particulars of lift service requirement and technical specifications etc. complete. 08 Stops and 08 openings.(Shaft Size available - 3100 mmx 2500 mm)
4
-
-
LIFT-1,2,3;Design, manufacture, supply, installation at site, testing, commissioning of Passenger cum Bed Lift to carry 26 (Twenty Six) persons capacity of load 1768 Kgs with a minimum speed of 1.5 metre per second as per the detailed specification attached including all necessary safety features and in accordance with the particulars of lift service requirement and technical specifications etc. complete. ;07 Stops and 07 openings. (Shaft Size available - 3100 mmx 2500 mm)
3
-
-
LIFT-4,5,6;Design, manufacture, supply, installation at site, testing, commissioning of Passenger cum Bed Lift to carry 26 (Twenty Six) persons capacity of load 1768 Kgs with a minimum speed of 1.5 metre per second as per the detailed specification attached including all necessary safety features and in accordance with the particulars of lift service requirement and technical specifications etc. complete. 06 Stops and 06 openings. (Shaft Size available - 3100 mmx 2500 mm).
3
-
-
LIFT-7,12 Design, manufacture, supply, installation at site, testing, commissioning of Passenger cum Bed Lift to carry 26 (Twenty Six) persons capacity of load 1768 Kgs with a minimum speed of 1.5 metre per second as per the detailed specification attached including all necessary safety features and in accordance with the particulars of lift service requirement and technical specifications etc. complete. 09 Stops and 09 openings. (Shaft Size available - 3100 mmx 2500 mm).
2
-
-
10 Passenger Lift (LIFT-13,14)Design, manufacture, supply, installation at site, testing, commissioning of Passenger cum Bed Lift to carry 10(Ten) persons capacity of load 680 Kgs with a minimum speed of 1.0 metre per second as per the detailed specification attached including all necessary safety features and in accordance with the particulars of lift service requirement and technical specifications etc. complete. 8 Stops and 8 openings.(Shaft Size available - 2000 mmx 2000 mm).
2
-
-
15 Passenger Lift; LIFT-16;Design, manufacture, supply, installation at site, testing, commissioning of Passenger cum Bed Lift to carry 15(Fifteen) persons capacity of load 1020 Kgs with a minimum speed of 1.0 meter per second as per the detailed specification attached including all necessary safety features and in accordance with the particulars of lift service requirement and technical specifications etc. complete.7 Stops and 7 openings. (Shaft Size available - 2700 mmx 2000 mm).
1
-
-
LIFT-18 ;Design, manufacture, supply, installation at site, testing, commissioning of Passenger cum Bed Lift to carry 15(Fifteen) persons capacity of load 1020 Kgs with a minimum speed of 1.0 metre per second as per the detailed specification attached including all necessary safety features and in accordance with the particulars of lift service requirement and technical specifications etc. complete. 8 Stops and 8 openings. (Shaft Size available - 2700 mmx 2000mm).
1
-
-
LIFT-15,17;Design, manufacture, supply, installation at site, testing, commissioning of Passenger cum Bed Lift to carry 15(Fifteen) persons capacity of load 1020 Kgs with a minimum speed of 1.0 meter per second as per the detailed specification attached including all necessary safety features and in accordance with the particulars of lift service requirement and technical specifications etc. complete.9 Stops and 9 openings.(Shaft Size available - 2700 mmx 2000 mm);Note :The rate shall include obtaining necessary initial and final approval from Kerala State electrical Inspectorate for lift installation and operation before handing over the entire lift installation.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements