INKEL Limited Tender
Everything can be found here in your one-stop destination for all types of Kerala tenders online - be it Kerala PWD tenders or an LSGD Kerala tender. Search from across the categories, cities, and authorities while having the option to download tender-related documents. Also, get to know how to register as a bidder and how to bid online for Kerala tenders.
Costs
EMD
₹ 50,000Document Cost
₹ 2,950Tender Fee
Refer Documents
Summary
Treasury Infrastructure Development Project Providing And Installing Furniture For Pension Payment Sub Treasury Kollam, Sub Treasury Kollam And Sub Treasury Pulpally, Wayanad
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_INKEL_412387_1Bid Award Id
ViewTender No
NIT/INKEL/TIDP/2020-21/218 dated 05/02/2021Tender Authority
INKEL Limited ViewPurchaser Address
-Website
http://etenders.kerala.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dining chair: Providing and Installing in position cafeteria Chair with Single moulded construction made out of High performance Plastic.The mould shall be of thickness 200mm. The chair shall be tested for a vertical load of 300 Kgs with high UV stability and scratch resistant surface.The chairs shall be stackable and of approved color and make. The models shall be waffle,tang or equivalent.
11
-
-
... More
3 seater Visitors Chair - Providing and installing 3 Seater Visitors chair with the following specification. Seat,arms & legs shall be made out of stainless steel 304 grade. The seats shall be connected using a centre beam made out of stainless steel 304 grade with armrest at either ends. The seats shall be of approved make and colour. 3Seater size - 1765(w)x710(d)x775mm(ht)
8
-
-
... More
Visitor chair (single):Providing & installing in Position Medium Back Visitor Chair with the following specifications. Seat & Back shall be Fabric upholstered/Mesh Back with 100% Polyester and weighing 320 GLM. Seat Foam shall be made out of PU foam with a density 50-60 Kg/m. Base shall be Mild Steel 4 Legged base powdercoated mounted on PVC bush. The Back rest shall be of dimension 610mm (H) X 425mm (W). Seat Size shall be of dimension 455mm (W) X 480mm (D). The product shall be BIFMA compliant.The chair shall be of approved make and colour.The models shall be Mint, Astro, Oxbo or equivalent
14
-
-
... More
Officer's Table :Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications.The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thick on both sides. The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.Table top should be supported with legs made of 40x40mmx2mm thick Square Mild Steel tubes powder coated with top subframe made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powdercoat finished with minimum of 60 microns thickness of approved Colour .The legs shall be cross braced adequetly .The table shall be provided with a CPU stand made of 25mm thick Prelaminated Particle Board having a size of 400x400x200 mm. The table should be provided with a cable manager of dia 60mm. The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. The table should be provided with a keyboard tray. Contractor shall submit and take approval for the shop drawing before fabrication. Main Table:1800 X 900 X 750 (h).
1
-
-
... More
Return table :Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications. The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thickness on both sides.The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Sides and back shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.The table should be provided with a cable manager of dia 60mm. Table top should be supported with legs made of 40x40mmx2mm thick Square Mild Steel tubes powder coated with top sub frame made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powder coat finished with minimum of 60 microns thickness of approved colour The legs shall be cross braced adequately. The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. Contractor shall submit and take approval for the shop drawing before fabrication. Return Table:- 900 X 600 X 750 (h).
2
-
-
... More
Linear work station-Counter table:-Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications. The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thick on both sides. The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Back and sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.Table top should be supported with legs made of 40mmx40mmx2mm thick Square Mild Steel tubes powder coated with top sub frame made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powder coat finished with minimum of 60 microns thickness of approved colour .The legs shall be cross braced adequately. The table should be provided with a cable manager of dia 60mm at a spacing of 1500mm/1200mm..The table shall be provided with a CPU stand made of 25mm thick Prelaminated Particle Board having a size of 400x400x200 mm under each work station.The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. The table should be provided with a keyboard tray. Contractor shall submit and take approval for the shop drawing before fabrication. Counter Table: 900(wide) X 750 (h).
19.22
-
-
... More
Return table for work stations: Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications.The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges.The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thickness on both sides. The modesty panel shall be 700mm in wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness. Back and sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required. The table should be provided with a cable manager of dia 60mm. Table top should be supported with legs made of 40mmx40mmx2mm Square Mild Steel tubes powder coated with top subframe made out of40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powdercoat finished with minimum of 60 microns thickness of approved colour .The legs shall be cross braced adequetly . The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. Contractor shall submit and take approval for the shop drawing before fabrication. Return Table:- 800(L)x450 (wide)X 750 (h).
4
-
-
... More
Glass partition for linear work station :Over Main table-Providing and installing 10mm thick toughened glass partition with etched boarders and bevelled edges as per the drawing for an overall height of 530mm at the center and 400 mm at both ends,fixed to 40mm Square 304 grade s.s tubular posts at either ends using patch fittings and providing a pegeon hole of 200mm x100 mm as per the approved sketch. Contractor shall submit and take approval for the shop drawing before fabrication.
11
-
-
... More
Glass partition for linear work station :Partition between work stations:-Providing and installing 10mm thick toughened glass partition with etched boarders as per the drawing for a height of 400mm fixed to 40mm Square 304 grade s.s tubular posts at either ends using patch fittings and providing a pegeon hole of 200mm x100 mm as per the approved sketch. Contractor shall submit and take approval for the shop drawing before fabrication.
5
-
-
... More
Floor mounted Storage(For work station): Providing and installing Floor Mounted Storage with the following specification. The storage shall be of dimension 800/ 900x 425x 900mm (H). The storage box shall have supporting vertical walls with a spacing of 800mm/900mm as per design.The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC edge banding and hidden phases with 0.80 mm thick PVC edge banding. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardwares shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor level. The cupboard shall be supported with exterior grade SS (304) tubular section of diameter 40mm 16 swg thick with 600mm c/c with a PVC bush below. The units shall be assembled by knock down fittings such as minifix. Contractor shall submit and take approval for the shop drawing before fabrication.Floor mounted Storage:- 800/ 900x 425x 900mm (H)
13
-
-
... More
Floor mounted Storage:Providing and installing Floor Mounted Storage with the following specification. The storage shall be of dimension 500x 450x 2100mm (H). The storage box shall have supporting vertical walls with a spacing of 800mm/900mm.The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC edge banding and hidden phases with 0.80 mm thick PVC edge banding. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor level. The Cupboard shall be supported with exterior grade SS (304) tubular section of diameter 40mm 16 swg thick with 600mm c/c with a PVC bush below. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval for the shop drawing before fabrication.Floor mounted Storage-500x 450x 2100mm (H) .
1.08
-
-
... More
Floor Mounted Corner Storage Unit: Providing and installing corner storage unit of height 900mm with the following specifications. The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved colour. The storage shall be an open space without shutters. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. All hardware shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor lvl. The Cupboard shall be supported with Exterior grade SS (304) Tubular section of diameter 40mm 16 swg thick with 600mm c/c with a rubber bush below. The units shall be assembled by knock down fittings such as Minifix. Contractor should submit and take approval shop drawing before fabrication.
0.4
-
-
... More
Overhead Corner Storage Unit: Providing and installing corner storage unit of height 600mm with the following specifications. The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved make and colour wall mounted using anchor screws with 6mm thick back panelling. The storage shall be an open space without shutters. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The units shall be assembled by knock down fittings such as Minifix. Contractor should submit and take approval of shop drawings before fabrication.
0.3
-
-
... More
Over Head Storage:-Providing and installing Overhead Storage with the following specification. The storage space shall be of dimension 800 to 900x350mmx600mm(H). The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval for the shop drawing before fabrication Over Head Storage:800 to 900x350mmx600mm(H)
10
-
-
... More
Wall panelling: Providing and installing Wall panelling between floor mounted storage and Over Head Storage using 12mm thick marine plywood of BWR 303 with exterior surface and cut edges duly hot pressed 1mm thick laminates with approved shade matching finish of cabinets. 50% space shall be provided with pinup boards. Pinup boards shall be provided as per the site requirements matching with the laminates(Approx 50%). Contractor shall submit and take approval for the shop drawing before fabrication..
6
-
-
... More
Wicket door:Providing and installing wicket door with the following specification- The door shall be made of 16mm thick marine plywood of 710grade with 1mm thick lamination. All exposed edges shall be finished with 2mm thick PVC edge banding. The door shall be fitted with stainless steel butt hinges (3 inch) and SS tower bolt. All hardware shall be of approved make.
0.8
-
-
... More
Double skin partition: Providing and installing Double skin partition with the following specification-The frames are made of 50x50x1.5mm aluminium square tube with 6mm thick 303 Grade marine plywood at both side and provide 1 mm thick lamination. The frames shall be fitted using drywall screws , and provide beading using beech wood wherever required. All hardware shall be of approved make.
0.6
-
-
... More
Pedestal Drawer Unit:Providing and installing Pedestal Storage with the following specification. The Pedestal shall contain 2 Box Drawer and 1 File Drawer. The carcass and shutter shall be made out of 16mm thick BWP 710 Grade Plywood. The Plywood shall be double side laminated with a thickness of 1mm of approved colour and shade and shall be machine pressed in a factory. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The drawer unit shall be provided with central locking system, where in all the drawers are locked with one key. Handles of approved make and design shall be provided. All hardware shall be of approved make. The pedestal shall be floor mounted with a spacing of min 100mm from the finished floor level. The pedestal shall be provided with four numbers Stainless steel 304 grade legs floor mounted on PVC bush minimum 25 mm thick. The drawer box shall be fitted with roller slide of approved make for free movement. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval shop drawing before fabrication. Area of shutters shall be taken for for measurements and for payments. Pedestal Drawer Unit: - 400mmx450mmx650mm.
13
-
-
... More
Providing and installing in position Dining table of size 1800mmx750mmx740mm high with the following specification. The table top shall be made up of 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved colour with 8mm thick toughened glass top with bevelled edge. All exposed edges shall be finished with 2mm thick PVC edge banding on both sides. Table top shall be mounted on 50mmx50mmx2mm thick MS tube frame supported with legs made of 50x50x2mm thick Square MS tubes powder coated with Tie member made out of 40mmx80mmx2mm thick rectangular powdercoat finished with minimum of 60 microns thickness finished of approved colour. Contractor shall submit and take approval for the shop drawing before fabrication. Table Dining:- 1800mm X 750mm X 740mm.
1
-
-
... More
Providing and installing in position wall mounted writing table with storage of size 1200mmwide 350mm long as the drawing. The table top and storages shall be made of 12mm thick BWP 710 grade Marine Plywood of approved make and colour and wall mounted with side brackets 300mm wide and 300mm high using anchor screws. Each storages of size 375X400X150mm.All exposed edges shall be finished with 2mm thick PVC edge banding on both sides. All hardwares shall be of approved make. Contractor shall submit and take approval for the shop drawing before fabrication .Wall Mounted writing table with storage :1200(w) X350 (d) X 750 (h).
2
-
-
... More
Supply and Installation of single cot as per the following specification. The frame shall be made up of 25mmx50mmx2mm thick MS square tube with powder coated finish supported on 40mmx40mmx2mm thick MS legs of same finish. The single cot shall be finished with treated country wood planks 20mm thick joint to form a single slab, properly finished with one coat of sealer and polish. Contractor shall submit and take approval for the shop drawing before fabrication.single cot:- 1800mmx750mmx500mm(H)
1
-
-
... More
Providing and installing cashier's counter as per the following specification.The counter shall be made of Aluminum grill and 12mm thick BWP 710 grade Marine Plywood supported on aluminum chanels using anchor screws as per drawing.An outward projection of 300mm wide and 1500mm long to be provided with 12mm thick BWP 710 grade Marine Plywood shall be provided at a height of 1200mm from floor level . All the exposed sides shall be provided with 1mm thick laminate of approved make and colour . The laminates shall be installed using hot pressed machine in a factory. Contractor shall submit and take approval for the shop drawing before fabrication.
1
-
-
... More
Providing & supply of Compactors as per dimension shown in layout with the following specifications:Construction: Rigid upright frame made out of 1.2mm thk CRCA steel box pipe.Upright with 25x50mm rectangular slotted pipe with cladding material of 0.7mm CRCA sheet.Complete construction in knock down design for easy handling & design is scalable to add bays in row wise or column wise subsequently.Shelves:Each unit has 6 loading levels formed by 5 loading shelves with a UDL(Uniform distributed load) of 80Kg capacity , 438mm depth,made of 0.8mm CRCA with stiffner.Shelves are mounted on support brackets & adjustable with a pitch of 25mm. Track Material:Aluminium track material with complete track assembly on self suppported design.making the installation grouting free.25mm thk prelaminated particle board walkway to be provided for easy access.& easily adjustable levellers required to keep platform & track parallel on uneven surfaces.Sloping ramp in aluminium for easy trolley access & reduced tipping hazard.Pulley belt mechanism for reduced noiseless & oil free operation.Ergonomic plastic handle with buit in safety lock mechanism.Central locking to be provided on last unit to lock the entire assembly.Compactor Ht from ground is 2100mm(1985mm body+75mm undercarrriage+40mm channel system).All metal components to be given anti rust surface treatment & powdercoated with epoxy polester powder with a DFT of 60-80 microns.Rate for 1 bay drive type with One number Single static+One number single end + one Number twin mobile unit.
1
-
-
... More
Fabric Roller Blinds -Providing installing fabric roller blinds as per the following specification. The roller blinds shall be supported with 32mm dia aluminum extrusion tubes at top and bottom .The bottom chain (pull up and down mechanism) shall be 1 meter long .The fabric should be approved make and colour.
28
-
-
... More
Reflective sun Film for window -Providing and installing reflective sun films with 8% visible light transmittance and 18% of visible light reflectance. The solar light transmittance should be 9% and 57% of solar light reflectance .The ultra violet transmittance shall be 2% and 91% of glare deduction. The film shall be provided with 0.26 shading coefficient and an emissivity of 0.6. Total solar energy rejection shall be 76%. The film should be of approved make and colour.(Approved brands-3M,Garware )
28
-
-
... More
Supplying velvet table cloth of approved make and colour.
2
-
-
... More
Supplying 8mm thick tinted clear glass with bevelled edges for table top.
2
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Cash Counter ( acrylic & vinyl 24’’ x 4’’)
2
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Counters & Door Signages(push & pull -vinyl sticker 16’’ x 4’’)
15
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Table Top Signages ( aluminum profile &vinyl 12’’ x 4’’)
2
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Wall mounted Signages ( aluminum profile &vinyl 16’’ x 4’’)
1
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Toilet Signages ( acrylic &vinyl sticker 16’’ x 4’’)
5
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge : Door Signages( acrylic &vinyl sticker)
6
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Design Charge,Transportation & Erection charges
1
-
-
... More
Supplying and fixing logo 600 mm dia, engraved on 18 gauge thick stainless steel plate 304 grade as per approved drawings and specifications.
2
-
-
... More
Supply and installing steel Slotted Angled Iron Rack with 6 Pannel (1800x900x380 cm) 20g
3
-
-
... More
PENSION PAYMENT SUB TREASURY KOLLAM - CABLE MANGAEMENT SYSTEM
-
-
-
... More
90.9.2.1 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.100 x 50 mm CMS with base and lid
30
-
-
... More
90.9.2.5 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal angle 90 degree
5
-
-
... More
90.9.2.6 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Internal coupler
10
-
-
... More
90.9.2.8 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. End cap
12
-
-
... More
90.9.2.2 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Cable dIvider
30
-
-
... More
Supply and fixing of DLP-S 2 MODULES FRAME for mounting wiring accessories in existing truncking system.
14
-
-
... More
Supply and fixing of DLP-S 4 MODULES FRAME for mounting wiring accessories in existing truncking system
24
-
-
... More
SUPPLY AND FIXING OF DLP-S 6 MODULES FRAME for mounting wiring accessories in existing truncking system.
14
-
-
... More
SUPPLY AND FIXING OF METAL HEIGHT ADJUSTABLE JUNCTION BOX OF SIZE 150X150X65-90 MM
4
-
-
... More
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
56
-
-
... More
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
56
-
-
... More
SUB TREASURY KOLLAM - FURNITURE
-
-
-
... More
Executive Chair-High back: Supply & installing of Executive Chairs as per the specification metioned below. Back Rest shall be high Back with Frame, Lumber Set, Headrest Outer and Joint made out of Nylon6 (PA6+GF30%), Headrest shall be made out of Polypropylene and Mesh specification shall be 100% Polyester. The unit shall comply with the California technical bulletin 117 for flammability. Seat to Backrest Height shall be 725mm with Backrest Width of 535mm. The seat shall be Foam-Moulded PU with density not less than 50-60Kg/m3 with waterfall edge. Seat width shall be 470mm(clear width between arms), Depth including waterfall shall be 485mm. Head Rest shall be made out of Polyurethane of density not less than 45g/mm3. The Back tilt range shall be 16 Degrees with back tension adjustment knob. The chair shall be Tested for 3,00,000 Cycles as per ANSI BIFMA X5.1 -2002. Gas Lift shall be 3 HP to absorb seating shocks with a higher stroke length of 120mm which shall be tested for 100000 cycles. All parts shall be BIFMA Compliant and shall be of approved make. The armrest shall be adjustable and made up of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm thick M.S. in sert. Arm pad size 258mm (L) x 112mm (W). The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 6mm thick. The armrest shall be height adjustable up to 80mm and back with adjustable up to 60mm. Arm rest shall be tested for 60,000 Cycles with load of 40Kg as per ANSI / BIFMA X5.1. Castor shall be Nylon with a diameter of 60 mm and shall be tested for 1,00,000 Cycles. The Base shall be glass reinforced Nylon Base with a pitch circle diameter of 658mm and shall be tested for a static load of 1450kg. The upholstery shall be fabrics with 100% polyester.The product shall be BIFMA compliant. The product shall be of approved make and colour. The model shall be Elate, Liberate, Aveo or equivalent.
2
-
-
... More
Staff Chair:- The outer and inner frame of the backrest shall be injection moulded in black polypropylene. Inner frame shall be upholstered with mesh fabric and assembled with the outer frame. The back shall have auto contoured lumber support for achieving comfortable seating posture. Lumber support shall be injection moulded in black polypropylene and upholstered with U foam. Lumber support shall be 160mm (W) x 90mm (H) at fixed position. Backrest size shall be 650mm (H) x 530 (W). The seat shall be made out of 12mm thick (7layers) hot pressed plywood and moulded seat foam upholstered with fabric. The bottom cover shall be injection moulded in black polypropylene to cover the plywood. Seat size shall be of dimension 495mm (W) x 510mm (D). Minimum and maximum seat height shall be 450mm and 550mm respectively. Seat Foam shall be made out of moulded polyurethane foam with the following properties:* Density: 45 -55 Kg/m3 * Hardness: 15 -20 Kgf * Compression set: 50% 10 Max * Tensile strength: 1.03 * Tear strength (Min) : 2.0 N/cm * Resilience : 50% - 60% * Comfort / Indentation Hardness : 15.4 . The armrest shall be adjustable and made out of black integral skin polyurethane with 45-55 Shore Hardness and reinforced with 4mm thick nylon in-sert. Arm pad shall be of dimension 265 x mm (L) x 95mm (W). The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 30% Gas field nylon 20mm thick. Minimum and Maximum height of armrest shall be 280mm/360mm respectively. The front and back movement of armrest shall be 60mm. Armrest shall be tested for 60,000 Cycles to be completed with load of 40 Kg per arm. Conventional mechanism with one lever control for lock and seat height adjustment shall be provided. Mechanism made out of MS Plate thickness shall be 3mm and seat shall have a tilting angle of 3 degree to10 degree and back tilting angle of 87degree to106 degree; with back tension adjustment knob. Mechanism shall be tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1. All members shall be BIFMA compliant. GAS LIFT: Gas lift pipe shall be of diameter 50mm with height adjustment stoke of 112mm. Gas lift shall be tested for 1,00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 4 and all applicable ANSI/BIFMA, EN performance standard. The base base shall be injection moulded in black 30% glass filled nylon and fitted with 5nos twin wheel castors. The base shall be 660 pitch circle diameter. The bases shall be tested for static load of 1250kg. The twin wheel castors shall be injection moulded in Nylon with a diameter of 60 mm. The castors shall be tested for 100000 cycles as per ANSI/BIFMA X 5.1. The Seat Fabric shall be of 100% polyester with an abrasion less than 96,000.* Flammability: Adheres to BS EN 1021-1 1994 (Cigarette) Adheres to BS 7176:1995 (Low Hazard)* Color Fastness to Light : Adheres to : 3+ [BS 1006 (1990)] Rubbing : Adheres to Dry: Class 3* Adheres to Wet: Class 3 The Backrest mesh shall be of 100% Polyester with a weight of 320 GLM and an abrasion of 80000 * Content: 100% Polyester * Weight: 320 GLM * Abrasion: 80,000 * Flammability: BS EN 1021-1 1994 (Cigarette)* BS 7176:1995 (Low Hazard) * Color Fastness to Light: 4.5+ [BS 1006 (1990)].The models shall be Anatom, That's it, Oxbo or equivalent.
14
-
-
... More
Dining chair: Providing and Installing in position cafeteria Chair with Single moulded construction made out of High performance Plastic.The mould shall be of thickness 200mm. The chair shall be tested for a vertical load of 300 Kgs with high UV stability and scratch resistant surface.The chairs shall be stackable and of approved color and make. The models shall be waffle,tang or equivalent.
11
-
-
... More
3 seater Visitors Chair - Providing and installing 3 Seater Visitors chair with the following specification. Seat,arms & legs shall be made out of stainless steel 304 grade. The seats shall be connected using a centre beam made out of stainless steel 304 grade with armrest at either ends. The seats shall be of approved make and colour. 3Seater size - 1765(w)x710(d)x775mm(ht)
8
-
-
... More
Visitor chair (single):Providing & installing in Position Medium Back Visitor Chair with the following specifications. Seat & Back shall be Fabric upholstered/Mesh Back with 100% Polyester and weighing 320 GLM. Seat Foam shall be made out of PU foam with a density 50-60 Kg/m. Base shall be Mild Steel 4 Legged base powdercoated mounted on PVC bush. The Back rest shall be of dimension 610mm (H) X 425mm (W). Seat Size shall be of dimension 455mm (W) X 480mm (D). The product shall be BIFMA compliant.The chair shall be of approved make and colour.The models shall be Mint, Astro, Oxbo or equivalent
15
-
-
... More
Officer's Table :Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications.The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thick on both sides. The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.Table top should be supported with legs made of 40x40mmx2mm thick Square Mild Steel tubes powder coated with top subframe made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powdercoat finished with minimum of 60 microns thickness of approved Colour .The legs shall be cross braced adequetly .The table shall be provided with a CPU stand made of 25mm thick Prelaminated Particle Board having a size of 400x400x200 mm. The table should be provided with a cable manager of dia 60mm. The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. The table should be provided with a keyboard tray. Contractor shall submit and take approval for the shop drawing before fabrication. Main Table:1800 X 900 X 750 (h).
1
-
-
... More
Return table :Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications. The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thickness on both sides.The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Sides and back shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.The table should be provided with a cable manager of dia 60mm. Table top should be supported with legs made of 40x40mmx2mm thick Square Mild Steel tubes powder coated with top sub frame made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powder coat finished with minimum of 60 microns thickness of approved colour The legs shall be cross braced adequately. The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. Contractor shall submit and take approval for the shop drawing before fabrication. Return Table:- 900 X 600 X 750 (h).
2
-
-
... More
Linear work station-Counter table:-Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications. The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thick on both sides. The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Back and sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.Table top should be supported with legs made of 40mmx40mmx2mm thick Square Mild Steel tubes powder coated with top sub frame made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powder coat finished with minimum of 60 microns thickness of approved colour .The legs shall be cross braced adequately. The table should be provided with a cable manager of dia 60mm at a spacing of 1500mm/1200mm..The table shall be provided with a CPU stand made of 25mm thick Prelaminated Particle Board having a size of 400x400x200 mm under each work station.The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. The table should be provided with a keyboard tray. Contractor shall submit and take approval for the shop drawing before fabrication. Counter Table: 900(wide) X 750 (h).
19.01
-
-
... More
Return table for work stations: Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications.The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges.The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thickness on both sides. The modesty panel shall be 700mm in wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness. Back and sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required. The table should be provided with a cable manager of dia 60mm. Table top should be supported with legs made of 40mmx40mmx2mm Square Mild Steel tubes powder coated with top subframe made out of40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powdercoat finished with minimum of 60 microns thickness of approved colour .The legs shall be cross braced adequetly . The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. Contractor shall submit and take approval for the shop drawing before fabrication. Return Table:- 800(L)x450 (wide)X 750 (h).
4
-
-
... More
Glass partition for linear work station :Over Main table-Providing and installing 10mm thick toughened glass partition with etched boarders and bevelled edges as per the drawing for an overall height of 530mm at the center and 400 mm at both ends,fixed to 40mm Square 304 grade s.s tubular posts at either ends using patch fittings and providing a pegeon hole of 200mm x100 mm as per the approved sketch. Contractor shall submit and take approval for the shop drawing before fabrication.
11
-
-
... More
Glass partition for linear work station :Partition between work stations:-Providing and installing 10mm thick toughened glass partition with etched boarders as per the drawing for a height of 400mm fixed to 40mm Square 304 grade s.s tubular posts at either ends using patch fittings and providing a pegeon hole of 200mm x100 mm as per the approved sketch. Contractor shall submit and take approval for the shop drawing before fabrication.
5
-
-
... More
Floor mounted Storage (For work station): Providing and installing Floor Mounted Storage with the following specification. The storage shall be of dimension 800/ 900x 425x 900mm (H). The storage box shall have supporting vertical walls with a spacing of 800mm/900mm as per design.The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC edge banding and hidden phases with 0.80 mm thick PVC edge banding. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardwares shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor level. The cupboard shall be supported with exterior grade SS (304) tubular section of diameter 40mm 16 swg thick with 600mm c/c with a PVC bush below. The units shall be assembled by knock down fittings such as minifix. Contractor shall submit and take approval for the shop drawing before fabrication.Floor mounted Storage:- 800/ 900x 425x 900mm (H)
11
-
-
... More
Floor mounted Storage: Providing and installing Floor Mounted Storage with the following specification. The storage shall be of dimension 500x 450x 2100mm (H). The storage box shall have supporting vertical walls with a spacing of 800mm/900mm.The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC edge banding and hidden phases with 0.80 mm thick PVC edge banding. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor level. The Cupboard shall be supported with exterior grade SS (304) tubular section of diameter 40mm 16 swg thick with 600mm c/c with a PVC bush below. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval for the shop drawing before fabrication.Floor mounted Storage-500x 450x 2100mm (H) .
1.08
-
-
... More
Floor Mounted Corner Storage Unit: Providing and installing corner storage unit of height 900mm with the following specifications. The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved colour. The storage shall be an open space without shutters. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. All hardware shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor lvl. The Cupboard shall be supported with Exterior grade SS (304) Tubular section of diameter 40mm 16 swg thick with 600mm c/c with a rubber bush below. The units shall be assembled by knock down fittings such as Minifix. Contractor should submit and take approval shop drawing before fabrication.
0.4
-
-
... More
Overhead Corner Storage Unit: Providing and installing corner storage unit of height 600mm with the following specifications. The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved make and colour wall mounted using anchor screws with 6mm thick back panelling. The storage shall be an open space without shutters. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The units shall be assembled by knock down fittings such as Minifix. Contractor should submit and take approval of shop drawings before fabrication.
0.3
-
-
... More
Over Head Storage:-Providing and installing Overhead Storage with the following specification. The storage space shall be of dimension 800 to 900x350mmx600mm(H). The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval for the shop drawing before fabrication Over Head Storage:800 to 900x350mmx600mm(H)
8
-
-
... More
Wall panelling: Providing and installing Wall panelling between floor mounted storage and Over Head Storage using 12mm thick marine plywood of BWR 303 with exterior surface and cut edges duly hot pressed 1mm thick laminates with approved shade matching finish of cabinets. 50% space shall be provided with pinup boards. Pinup boards shall be provided as per the site requirements matching with the laminates(Approx 50%). Contractor shall submit and take approval for the shop drawing before fabrication..
5
-
-
... More
Wicket door:Providing and installing wicket door with the following specification- The door shall be made of 16mm thick marine plywood of 710grade with 1mm thick lamination. All exposed edges shall be finished with 2mm thick PVC edge banding. The door shall be fitted with stainless steel butt hinges (3 inch) and SS tower bolt. All hardware shall be of approved make.
0.8
-
-
... More
Double skin partition: Providing and installing Double skin partition with the following specification-The frames are made of 50x50x1.5mm aluminium square tube with 6mm thick 303 Grade marine plywood at both side and provide 1 mm thick lamination. The frames shall be fitted using drywall screws , and provide beading using beech wood wherever required. All hardware shall be of approved make.
0.6
-
-
... More
Pedestal Drawer Unit:Providing and installing Pedestal Storage with the following specification. The Pedestal shall contain 2 Box Drawer and 1 File Drawer. The carcass and shutter shall be made out of 16mm thick BWP 710 Grade Plywood. The Plywood shall be double side laminated with a thickness of 1mm of approved colour and shade and shall be machine pressed in a factory. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The drawer unit shall be provided with central locking system, where in all the drawers are locked with one key. Handles of approved make and design shall be provided. All hardware shall be of approved make. The pedestal shall be floor mounted with a spacing of min 100mm from the finished floor level. The pedestal shall be provided with four numbers Stainless steel 304 grade legs floor mounted on PVC bush minimum 25 mm thick. The drawer box shall be fitted with roller slide of approved make for free movement. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval shop drawing before fabrication. Area of shutters shall be taken for for measurements and for payments. Pedestal Drawer Unit: - 400mmx450mmx650mm.
13
-
-
... More
Providing and installing in position Dining table of size 1800mmx750mmx740mm high with the following specification. The table top shall be made up of 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved colour with 8mm thick toughened glass top with bevelled edge. All exposed edges shall be finished with 2mm thick PVC edge banding on both sides. Table top shall be mounted on 50mmx50mmx2mm thick MS tube frame supported with legs made of 50x50x2mm thick Square MS tubes powder coated with Tie member made out of 40mmx80mmx2mm thick rectangular powdercoat finished with minimum of 60 microns thickness finished of approved colour. Contractor shall submit and take approval for the shop drawing before fabrication. Table Dining:- 1800mm X 750mm X 740mm.
1
-
-
... More
Providing and installing in position wall mounted writing table with storage of size 1200mmwide 350mm long as the drawing. The table top and storages shall be made of 12mm thick BWP 710 grade Marine Plywood of approved make and colour and wall mounted with side brackets 300mm wide and 300mm high using anchor screws. Each storages of size 375X400X150mm.All exposed edges shall be finished with 2mm thick PVC edge banding on both sides. All hardwares shall be of approved make. Contractor shall submit and take approval for the shop drawing before fabrication .Wall Mounted writing table with storage :1200(w) X350 (d) X 750 (h).
2
-
-
... More
Supply and Installation of single cot as per the following specification. The frame shall be made up of 25mmx50mmx2mm thick MS square tube with powder coated finish supported on 40mmx40mmx2mm thick MS legs of same finish. The single cot shall be finished with treated country wood planks 20mm thick joint to form a single slab, properly finished with one coat of sealer and polish. Contractor shall submit and take approval for the shop drawing before fabrication.single cot:- 1800mmx750mmx500mm(H)
1
-
-
... More
Providing and installing cashier's counter as per the following specification.The counter shall be made of Aluminum grill and 12mm thick BWP 710 grade Marine Plywood supported on aluminum chanels using anchor screws as per drawing.An outward projection of 300mm wide and 1500mm long to be provided with 12mm thick BWP 710 grade Marine Plywood shall be provided at a height of 1200mm from floor level . All the exposed sides shall be provided with 1mm thick laminate of approved make and colour . The laminates shall be installed using hot pressed machine in a factory. Contractor shall submit and take approval for the shop drawing before fabrication.
1
-
-
... More
Providing & supply of Compactors as per dimension shown in layout with the following specifications:Construction: Rigid upright frame made out of 1.2mm thk CRCA steel box pipe.Upright with 25x50mm rectangular slotted pipe with cladding material of 0.7mm CRCA sheet.Complete construction in knock down design for easy handling & design is scalable to add bays in row wise or column wise subsequently.Shelves:Each unit has 6 loading levels formed by 5 loading shelves with a UDL(Uniform distributed load) of 80Kg capacity , 438mm depth,made of 0.8mm CRCA with stiffner.Shelves are mounted on support brackets & adjustable with a pitch of 25mm. Track Material:Aluminium track material with complete track assembly on self suppported design.making the installation grouting free.25mm thk prelaminated particle board walkway to be provided for easy access.& easily adjustable levellers required to keep platform & track parallel on uneven surfaces.Sloping ramp in aluminium for easy trolley access & reduced tipping hazard.Pulley belt mechanism for reduced noiseless & oil free operation.Ergonomic plastic handle with buit in safety lock mechanism.Central locking to be provided on last unit to lock the entire assembly.Compactor Ht from ground is 2100mm(1985mm body+75mm undercarrriage+40mm channel system).All metal components to be given anti rust surface treatment & powdercoated with epoxy polester powder with a DFT of 60-80 microns.Rate for 1 bay drive type with One number Single static+One number single end + one Number twin mobile unit.
1
-
-
... More
Fabric Roller Blinds -Providing installing fabric roller blinds as per the following specification. The roller blinds shall be supported with 32mm dia aluminum extrusion tubes at top and bottom .The bottom chain (pull up and down mechanism) shall be 1 meter long .The fabric should be approved make and colour.
28
-
-
... More
Reflective sun Film for window -Providing and installing reflective sun films with 8% visible light transmittance and 18% of visible light reflectance. The solar light transmittance should be 9% and 57% of solar light reflectance .The ultra violet transmittance shall be 2% and 91% of glare deduction. The film shall be provided with 0.26 shading coefficient and an emissivity of 0.6. Total solar energy rejection shall be 76%. The film should be of approved make and colour.(Approved brands-3M,Garware )
28
-
-
... More
Supplying velvet table cloth of approved make and colour.
2
-
-
... More
Supplying 8mm thick tinted clear glass with bevelled edges for table top.
2
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Cash Counter ( acrylic & vinyl 24’’ x 4’’)
1
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Counters & Door Signages(push & pull -vinyl sticker 16’’ x 4’’)
16
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Table Top Signages ( aluminum profile &vinyl 12’’ x 4’’)
2
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Wall mounted Signages ( aluminum profile &vinyl 16’’ x 4’’)
1
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Toilet Signages ( acrylic &vinyl sticker 16’’ x 4’’)
5
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge : Door Signages( acrylic & vinyl sticker)
6
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Design Charge,Transportation & Erection charges
1
-
-
... More
Supplying and fixing logo 600 mm dia, engraved on 18 gauge thick stainless steel plate 304 grade as per approved drawings and specifications.
2
-
-
... More
Supply and installing steel Slotted Angled Iron Rack with 6 Pannel (1800x900x380 cm) 20g
3
-
-
... More
SUB TREASURY KOLLAM - CABLE MANGAEMENT SYSTEM
-
-
-
... More
90.9.2.1 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
100 x 50 mm CMS with base and lid
30
-
-
... More
90.9.2.5 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Internal angle 90 degree
5
-
-
... More
90.9.2.6 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
.Internal coupler
10
-
-
... More
90.9.2.8 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
End cap
12
-
-
... More
90.9.2.2 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
Cable divider
30
-
-
... More
Supply and fixing of DLP-S 2 MODULES FRAME for mounting wiring accessories in existing truncking system.
14
-
-
... More
Supply and fixing of DLP-S 4 MODULES FRAME for mounting wiring accessories in existing truncking system.
24
-
-
... More
SUPPLY AND FIXING OF DLP-S 6 MODULES FRAME for mounting wiring accessories in existing truncking system.
14
-
-
... More
SUPPLY AND FIXING OF METAL HEIGHT ADJUSTABLE JUNCTION BOX OF SIZE 150X150X65-90 MM
4
-
-
... More
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
56
-
-
... More
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
56
-
-
... More
SUB TREASURY PULPALLY - FURNITURE
-
-
-
... More
Executive Chair-High back: Supply & installing of Executive Chairs as per the specification metioned below. Back Rest shall be high Back with Frame, Lumber Set, Headrest Outer and Joint made out of Nylon6 (PA6+GF30%), Headrest shall be made out of Polypropylene and Mesh specification shall be 100% Polyester. The unit shall comply with the California technical bulletin 117 for flammability. Seat to Backrest Height shall be 725mm with Backrest Width of 535mm. The seat shall be Foam-Moulded PU with density not less than 50-60Kg/m3 with waterfall edge. Seat width shall be 470mm(clear width between arms), Depth including waterfall shall be 485mm. Head Rest shall be made out of Polyurethane of density not less than 45g/mm3. The Back tilt range shall be 16 Degrees with back tension adjustment knob. The chair shall be Tested for 3,00,000 Cycles as per ANSI BIFMA X5.1 -2002. Gas Lift shall be 3 HP to absorb seating shocks with a higher stroke length of 120mm which shall be tested for 100000 cycles. All parts shall be BIFMA Compliant and shall be of approved make. The armrest shall be adjustable and made up of black integral skin polyurethane with 40-55 Shore Hardness and reinforced with 2mm thick M.S. in sert. Arm pad size 258mm (L) x 112mm (W). The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 6mm thick. The armrest shall be height adjustable up to 80mm and back with adjustable up to 60mm. Arm rest shall be tested for 60,000 Cycles with load of 40Kg as per ANSI / BIFMA X5.1. Castor shall be Nylon with a diameter of 60 mm and shall be tested for 1,00,000 Cycles. The Base shall be glass reinforced Nylon Base with a pitch circle diameter of 658mm and shall be tested for a static load of 1450kg. The upholstery shall be fabrics with 100% polyester.The product shall be BIFMA compliant. The product shall be of approved make and colour. The model shall be Elate, Liberate, Aveo or equivalent.
2
-
-
... More
Staff Chair:- The outer and inner frame of the backrest shall be injection moulded in black polypropylene. Inner frame shall be upholstered with mesh fabric and assembled with the outer frame. The back shall have auto contoured lumber support for achieving comfortable seating posture. Lumber support shall be injection moulded in black polypropylene and upholstered with U foam. Lumber support shall be 160mm (W) x 90mm (H) at fixed position. Backrest size shall be 650mm (H) x 530 (W). The seat shall be made out of 12mm thick (7layers) hot pressed plywood and moulded seat foam upholstered with fabric. The bottom cover shall be injection moulded in black polypropylene to cover the plywood. Seat size shall be of dimension 495mm (W) x 510mm (D). Minimum and maximum seat height shall be 450mm and 550mm respectively. Seat Foam shall be made out of moulded polyurethane foam with the following properties:* Density: 45 -55 Kg/m3 * Hardness: 15 -20 Kgf * Compression set: 50% 10 Max * Tensile strength: 1.03 * Tear strength (Min) : 2.0 N/cm * Resilience : 50% - 60% * Comfort / Indentation Hardness : 15.4 . The armrest shall be adjustable and made out of black integral skin polyurethane with 45-55 Shore Hardness and reinforced with 4mm thick nylon in-sert. Arm pad shall be of dimension 265 x mm (L) x 95mm (W). The armrests shall be fitted to the seat with seat/armrest connecting strip assembly made of 30% Gas field nylon 20mm thick. Minimum and Maximum height of armrest shall be 280mm/360mm respectively. The front and back movement of armrest shall be 60mm. Armrest shall be tested for 60,000 Cycles to be completed with load of 40 Kg per arm. Conventional mechanism with one lever control for lock and seat height adjustment shall be provided. Mechanism made out of MS Plate thickness shall be 3mm and seat shall have a tilting angle of 3 to10degree; and back tilting angle of 87degree to106 degree; with back tension adjustment knob. Mechanism shall be tested for 3, 00,000 Cycles as per ANSI / BIFMA X5.1. All members shall be BIFMA compliant. GAS LIFT: Gas lift pipe shall be of diameter 50mm with height adjustment stoke of 112mm. Gas lift shall be tested for 1,00,000 Cycles as per ANSI / BIFMA X5.1. Meets DIN 4550 Class 4 and all applicable ANSI/BIFMA, EN performance standard. The base base shall be injection moulded in black 30% glass filled nylon and fitted with 5nos twin wheel castors. The base shall be 660 pitch circle diameter. The bases shall be tested for static load of 1250kg. The twin wheel castors shall be injection moulded in Nylon with a diameter of 60 mm. The castors shall be tested for 100000 cycles as per ANSI/BIFMA X 5.1. The Seat Fabric shall be of 100% polyester with an abrasion less than 96,000. * Flammability: Adheres to BS EN 1021-1 1994 (Cigarette) ; Adheres to BS 7176:1995 (Low Hazard)* Color Fastness to Light : Adheres to : 3+ [BS 1006 (1990)] ; Rubbing : Adheres to Dry: Class 3* Adheres to Wet: Class 3 The Backrest mesh shall be of 100% Polyester with a weight of 320 GLM and an abrasion of 80000 :* Content: 100% Polyester * Weight: 320 GLM * Abrasion: 80,000 * Flammability: BS EN 1021-1 1994 (Cigarette)* BS 7176:1995 (Low Hazard) * Color Fastness to Light: 4.5+ [BS 1006 (1990)].The models shall be Anatom, That's it, Oxbo or equivalent.
10
-
-
... More
Dining chair: Providing and Installing in position cafeteria Chair with Single moulded construction made out of High performance Plastic.The mould shall be of thickness 200mm. The chair shall be tested for a vertical load of 300 Kgs with high UV stability and scratch resistant surface.The chairs shall be stackable and of approved color and make. The models shall be waffle,tang or equivalent.
10
-
-
... More
3 seater Visitors Chair - Providing and installing 3 Seater Visitors chair with the following specification. Seat,arms & legs shall be made out of stainless steel 304 grade. The seats shall be connected using a centre beam made out of stainless steel 304 grade with armrest at either ends. The seats shall be of approved make and colour. 3Seater size - 1765(w)x710(d)x775mm(ht)
6
-
-
... More
Visitor chair (single): Providing & installing in Position Medium Back Visitor Chair with the following specifications. Seat & Back shall be Fabric upholstered/Mesh Back with 100% Polyester and weighing 320 GLM. Seat Foam shall be made out of PU foam with a density 50-60 Kg/m. Base shall be Mild Steel 4 Legged base powdercoated mounted on PVC bush. The Back rest shall be of dimension 610mm (H) X 425mm (W). Seat Size shall be of dimension 455mm (W) X 480mm (D). The product shall be BIFMA compliant.The chair shall be of approved make and colour.The models shall be Mint, Astro, Oxbo or equivalent
32
-
-
... More
Officer's Table :Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications.The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thick on both sides. The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.Table top should be supported with legs made of 40x40mmx2mm thick Square Mild Steel tubes powder coated with top subframe made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powdercoat finished with minimum of 60 microns thickness of approved Colour .The legs shall be cross braced adequetly .The table shall be provided with a CPU stand made of 25mm thick Prelaminated Particle Board having a size of 400x400x200 mm. The table should be provided with a cable manager of dia 60mm. The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. The table should be provided with a keyboard tray. Contractor shall submit and take approval for the shop drawing before fabrication. Main Table:1800 X 900 X 750 (h).
1
-
-
... More
Return table :Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications. The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thickness on both sides.The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Sides and back shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.The table should be provided with a cable manager of dia 60mm. Table top should be supported with legs made of 40x40mmx2mm thick Square Mild Steel tubes powder coated with top sub frame made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powder coat finished with minimum of 60 microns thickness of approved colour The legs shall be cross braced adequately. The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. Contractor shall submit and take approval for the shop drawing before fabrication. Return Table:- 900 X 600 X 750 (h).
2
-
-
... More
Linear work station-Counter table:-Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications. The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges. The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thick on both sides. The modesty panel provided at an offset of 300mm from the outer edge of the table shall be 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness.Back and sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required.Table top should be supported with legs made of 40mmx40mmx2mm thick Square Mild Steel tubes powder coated with top sub frame made out of 40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powder coat finished with minimum of 60 microns thickness of approved colour .The legs shall be cross braced adequately. The table should be provided with a cable manager of dia 60mm at a spacing of 1500mm/1200mm..The table shall be provided with a CPU stand made of 25mm thick Prelaminated Particle Board having a size of 400x400x200 mm under each work station.The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. The table should be provided with a keyboard tray. Contractor shall submit and take approval for the shop drawing before fabrication. Counter Table: 900(wide) X 750 (h).
16
-
-
... More
Return table for work stations: Providing and installing tables made out of prelaminated particle board mounted on Mild steel powder coated frame as per the following specifications.The table top shall be made of 25mm thick Prelaminated Particle Board of approved colour and shade with post formed edges.The particle board shall be hot pressed machine laminated with PVC Edge banding of 2mm thickness on both sides. The modesty panel shall be 700mm in wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thickness. Back and sides shall be covered 700mm wide and made of 18mm thick Prelaminated Particle Board with PVC edge banding of 0.8mm thick wherever required. The table should be provided with a cable manager of dia 60mm. Table top should be supported with legs made of 40mmx40mmx2mm Square Mild Steel tubes powder coated with top subframe made out of40mmx40mmx2mm Square Mild Steel tubes cross braced top and bottom, powdercoat finished with minimum of 60 microns thickness of approved colour .The legs shall be cross braced adequetly . The Mild Steel legs shall be floor mounted with PVC bush minimum 25 mm thick. Contractor shall submit and take approval for the shop drawing before fabrication. Return Table:- 800(L)x450 (wide)X 750 (h).
8
-
-
... More
Glass partition for linear work station :Over Main table-Providing and installing 10mm thick toughened glass partition with etched boarders and bevelled edges as per the drawing for an overall height of 530mm at the center and 400 mm at both ends,fixed to 40mm Square 304 grade s.s tubular posts at either ends using patch fittings and providing a pegeon hole of 200mm x100 mm as per the approved sketch. Contractor shall submit and take approval for the shop drawing before fabrication.
9
-
-
... More
Glass partition for linear work station :Partition between work stations:-Providing and installing 10mm thick toughened glass partition with etched boarders as per the drawing for a height of 400mm fixed to 40mm Square 304 grade s.s tubular posts at either ends using patch fittings and providing a pegeon hole of 200mm x100 mm as per the approved sketch. Contractor shall submit and take approval for the shop drawing before fabrication.
3
-
-
... More
Floor mounted Storage (For work station): Providing and installing Floor Mounted Storage with the following specification. The storage shall be of dimension 800/ 900x 425x 900mm (H). The storage box shall have supporting vertical walls with a spacing of 800mm/900mm as per design.The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC edge banding and hidden phases with 0.80 mm thick PVC edge banding. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardwares shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor level. The cupboard shall be supported with exterior grade SS (304) tubular section of diameter 40mm 16 swg thick with 600mm c/c with a PVC bush below. The units shall be assembled by knock down fittings such as minifix. Contractor shall submit and take approval for the shop drawing before fabrication.Floor mounted Storage:- 800/ 900x 425x 900mm (H)
25
-
-
... More
Floor mounted Storage: Providing and installing Floor Mounted Storage with the following specification. The storage shall be of dimension 500x 450x 2100mm (H). The storage box shall have supporting vertical walls with a spacing of 800mm/900mm.The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC edge banding and hidden phases with 0.80 mm thick PVC edge banding. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor level. The Cupboard shall be supported with exterior grade SS (304) tubular section of diameter 40mm 16 swg thick with 600mm c/c with a PVC bush below. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval for the shop drawing before fabrication.Floor mounted Storage-500x 450x 2100mm (H) .
1.08
-
-
... More
Floor Mounted Corner Storage Unit: Providing and installing corner storage unit of height 900mm with the following specifications. The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved colour. The storage shall be an open space without shutters. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. All hardware shall be of approved make. The cupboard shall be wall mounted with a spacing of min 100mm from the finished floor lvl. The Cupboard shall be supported with Exterior grade SS (304) Tubular section of diameter 40mm 16 swg thick with 600mm c/c with a rubber bush below. The units shall be assembled by knock down fittings such as Minifix. Contractor should submit and take approval shop drawing before fabrication.
0.76
-
-
... More
Overhead Corner Storage Unit: Providing and installing corner storage unit of height 600mm with the following specifications. The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved make and colour wall mounted using anchor screws with 6mm thick back panelling. The storage shall be an open space without shutters. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The units shall be assembled by knock down fittings such as Minifix. Contractor should submit and take approval of shop drawings before fabrication.
0.51
-
-
... More
Over Head Storage:-Providing and installing Overhead Storage with the following specification. The storage space shall be of dimension 800 to 900x350mmx600mm(H). The carcass shall be 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved make and colour ,wall mounted using anchor screws with 6mm thick back panelling. The shutters(400 to 450mm wide as per site conditions) shall be made of 16mm thick laminated PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent ) of approved finish and make. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The laminates shall be installed using hot pressed machine in a factory. The shutters shall be fitted with stainless steel self and soft closing hinges. All hardware shall be of approved make. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval for the shop drawing before fabrication Over Head Storage:800 to 900x350mmx600mm(H)
7.6
-
-
... More
Wall panelling: Providing and installing Wall panelling between floor mounted storage and Over Head Storage using 12mm thick marine plywood of BWR 303 with exterior surface and cut edges duly hot pressed 1mm thick laminates with approved shade matching finish of cabinets. 50% space shall be provided with pinup boards. Pinup boards shall be provided as per the site requirements matching with the laminates(Approx 50%). Contractor shall submit and take approval for the shop drawing before fabrication..
4
-
-
... More
Wicket door:Providing and installing wicket door with the following specification- The door shall be made of 16mm thick marine plywood of 710grade with 1mm thick lamination. All exposed edges shall be finished with 2mm thick PVC edge banding. The door shall be fitted with stainless steel butt hinges (3 inch) and SS tower bolt. All hardware shall be of approved make.
2.5
-
-
... More
Double skin partition: Providing and installing Double skin partition with the following specification-The frames are made of 50x50x1.5mm aluminium square tube with 6mm thick 303 Grade marine plywood at both side and provide 1 mm thick lamination. The frames shall be fitted using drywall screws , and provide beading using beech wood wherever required. All hardware shall be of approved make.
0.8
-
-
... More
Pedestal Drawer Unit:Providing and installing Pedestal Storage with the following specification. The Pedestal shall contain 2 Box Drawer and 1 File Drawer. The carcass and shutter shall be made out of 16mm thick BWP 710 Grade Plywood. The Plywood shall be double side laminated with a thickness of 1mm of approved colour and shade and shall be machine pressed in a factory. All exposed edges shall be finished with 2mm thick PVC Lipping and hidden phases with 0.80 mm thick PVC Lipping. The drawer unit shall be provided with central locking system, where in all the drawers are locked with one key. Handles of approved make and design shall be provided. All hardware shall be of approved make. The pedestal shall be floor mounted with a spacing of min 100mm from the finished floor level. The pedestal shall be provided with four numbers Stainless steel 304 grade legs floor mounted on PVC bush minimum 25 mm thick. The drawer box shall be fitted with roller slide of approved make for free movement. The units shall be assembled by knock down fittings such as Minifix. Contractor shall submit and take approval shop drawing before fabrication. Area of shutters shall be taken for for measurements and for payments. Pedestal Drawer Unit: - 400mmx450mmx650mm.
11
-
-
... More
Providing and installing in position Dining table of size 1800mmx750mmx740mm high with the following specification. The table top shall be made up of 18mm thick PVC Polyester resin in an extruded polymer profile (Multiwood or equivalent) of approved colour with 8mm thick toughened glass top with bevelled edge. All exposed edges shall be finished with 2mm thick PVC edge banding on both sides. Table top shall be mounted on 50mmx50mmx2mm thick MS tube frame supported with legs made of 50x50x2mm thick Square MS tubes powder coated with Tie member made out of 40mmx80mmx2mm thick rectangular powdercoat finished with minimum of 60 microns thickness finished of approved colour. Contractor shall submit and take approval for the shop drawing before fabrication. Table Dining:- 1800mm X 750mm X 740mm.
1
-
-
... More
Providing and installing in position wall mounted writing table with storage of size 1200mmwide 350mm long as the drawing. The table top and storages shall be made of 12mm thick BWP 710 grade Marine Plywood of approved make and colour and wall mounted with side brackets 300mm wide and 300mm high using anchor screws. Each storages of size 375X400X150mm.All exposed edges shall be finished with 2mm thick PVC edge banding on both sides. All hardwares shall be of approved make. Contractor shall submit and take approval for the shop drawing before fabrication .Wall Mounted writing table with storage :1200(w) X350 (d) X 750 (h).
2
-
-
... More
Supply and Installation of single cot as per the following specification. The frame shall be made up of 25mmx50mmx2mm thick MS square tube with powder coated finish supported on 40mmx40mmx2mm thick MS legs of same finish. The single cot shall be finished with treated country wood planks 20mm thick joint to form a single slab, properly finished with one coat of sealer and polish. Contractor shall submit and take approval for the shop drawing before fabrication.single cot:- 1800mmx750mmx500mm(H)
2
-
-
... More
Providing and installing cashier's counter as per the following specification.The counter shall be made of Aluminum grill and 12mm thick BWP 710 grade Marine Plywood supported on aluminum chanels using anchor screws as per drawing.An outward projection of 300mm wide and 1500mm long to be provided with 12mm thick BWP 710 grade Marine Plywood shall be provided at a height of 1200mm from floor level . All the exposed sides shall be provided with 1mm thick laminate of approved make and colour . The laminates shall be installed using hot pressed machine in a factory. Contractor shall submit and take approval for the shop drawing before fabrication.
1
-
-
... More
Providing & supply of Compactors as per dimension shown in layout with the following specifications:Construction: Rigid upright frame made out of 1.2mm thk CRCA steel box pipe.Upright with 25x50mm rectangular slotted pipe with cladding material of 0.7mm CRCA sheet.Complete construction in knock down design for easy handling & design is scalable to add bays in row wise or column wise subsequently.Shelves:Each unit has 6 loading levels formed by 5 loading shelves with a UDL(Uniform distributed load) of 80Kg capacity , 438mm depth,made of 0.8mm CRCA with stiffner.Shelves are mounted on support brackets & adjustable with a pitch of 25mm. Track Material:Aluminium track material with complete track assembly on self suppported design.making the installation grouting free.25mm thk prelaminated particle board walkway to be provided for easy access.& easily adjustable levellers required to keep platform & track parallel on uneven surfaces.Sloping ramp in aluminium for easy trolley access & reduced tipping hazard.Pulley belt mechanism for reduced noiseless & oil free operation.Ergonomic plastic handle with buit in safety lock mechanism.Central locking to be provided on last unit to lock the entire assembly.Compactor Ht from ground is 2100mm(1985mm body+75mm undercarrriage+40mm channel system).All metal components to be given anti rust surface treatment & powdercoated with epoxy polester powder with a DFT of 60-80 microns.Rate for 1 bay drive type with One number Single static+One number single end + one Number twin mobile unit.
1
-
-
... More
Fabric Roller Blinds -Providing installing fabric roller blinds as per the following specification. The roller blinds shall be supported with 32mm dia aluminum extrusion tubes at top and bottom .The bottom chain (pull up and down mechanism) shall be 1 meter long .The fabric should be approved make and colour.
39
-
-
... More
Reflective sun Film for window -Providing and installing reflective sun films with 8% visible light transmittance and 18% of visible light reflectance. The solar light transmittance should be 9% and 57% of solar light reflectance .The ultra violet transmittance shall be 2% and 91% of glare deduction. The film shall be provided with 0.26 shading coefficient and an emissivity of 0.6. Total solar energy rejection shall be 76%. The film should be of approved make and colour.(Approved brands-3M,Garware )
39
-
-
... More
Supplying velvet table cloth of approved make and colour.
2
-
-
... More
Supplying 8mm thick tinted clear glass with bevelled edges for table top.
2
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Cash Counter ( acrylic & vinyl 24’’ x 4’’)
1
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Counters & Door Signages(push & pull -vinyl sticker 16’’ x 4’’)
14
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Table Top Signages ( aluminum profile &vinyl 12’’ x 4’’)
2
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Wall mounted Signages ( aluminum profile &vinyl 16’’ x 4’’)
1
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Toilet Signages ( acrylic &vinyl sticker 16’’ x 4’’)
5
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge : Door Signages( acrylic & vinyl sticker)
6
-
-
... More
Signages-Supplying and providing signages as directed by Engineer incharge :Design Charge,Transportation & Erection charges
1
-
-
... More
Supplying and fixing logo 600 mm dia, engraved on 18 gauge thick stainless steel plate 304 grade as per approved drawings and specifications.
2
-
-
... More
Supply and installing steel Slotted Angled Iron Rack with 6 Pannel (1800x900x380 cm) 20g
3
-
-
... More
SUB TREASURY PULPALLY - CABLE MANGAEMENT SYSTEM
-
-
-
... More
90.9.2.1 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
100 x 50 mm CMS with base and lid
20
-
-
... More
90.9.2.5 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required. Internal angle 90 degree
5
-
-
... More
90.9.2.6 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.Internal coupler
6
-
-
... More
90.9.2.8 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
End cap
10
-
-
... More
90.9.2.2 : Supply and fixing 100 x 50 mm PVC Cable Management System with base and lid along with the following accessories conforming to IEC 61084/ BS 476 & 4678 on surface / recess including cutting the wall and making good the damages in case of recessed installation as required.
Cable divider
20
-
-
... More
Supply and fixing of DLP-S 2 MODULES FRAME for mounting wiring accessories in existing truncking system.
10
-
-
... More
Supply and fixing of DLP-S 4 MODULES FRAME for mounting wiring accessories in existing truncking system.
20
-
-
... More
SUPPLY AND FIXING OF DLP-S 6 MODULES FRAME for mounting wiring accessories in existing truncking system.
10
-
-
... More
SUPPLY AND FIXING OF METAL HEIGHT ADJUSTABLE JUNCTION BOX OF SIZE 150X150X65-90 MM
4
-
-
... More
1.24.1 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch
40
-
-
... More
1.24.4 : Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet
40
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements