Electricity Department Tender

Supply of 11 KV HT Pin insulator with GI pin.

Supply of 11 KV HT Strain disc with metal parts.

Supply of LT 3 phase cross arm with suitable pole clamp.

Supply of "F" clamp

Supply of 5' 6" Tapping channel cross arm with suitable clamp

Supply of side arm support

Supply of stay set HT

Supply of L.T Shackles with metal parts.

Supply of L.T Pin Insulator with Pin

Labour charges for erection of "V" cross arm with stay clamp ( 2 Nos.)

Labour charges for erection of 11 KV HT Pin insulator with GI pin.

Labour charges for erection of 11KV HT Strain disc with metal parts.

Labour charges for erection of LT 3 phase cross arm with suitable pole clamp.

Labour charges for erection of LT Pin insulator with pin.

Labour charges for erection of LT shackle with metal parts

Labour charges for erection of HT stay set complete including excavation of pit.

Labour charges for fixing of "F" clamp

Labour charges for straining of ACSR 7/3.35 conductor HT/LT

Labour charges for straining of ACSR 7/2.59 conductor HT/LT

Supply and Labour charges for erection of 30’ RCC pole including excavation of pole pit and concreting, 0.6 x 0.6 x 1.5 Mts. and coping 0.6 x 0.6 x 0.5 Mts. in 1:3:6 ratio using 20 mm HGB Metal, earthing of RCC pole including supply of concreting materials and No. 6 G.I wire for earthing.

Supply and labour for erection of DP Transformer structure complete including excavation,erection of 30' RCC pole, refilling of 30' RCC pole and concreting 0.6 x 0.6 x 1.5 mts. and coping 0.6 x 0.6 x 0.5 mts. in 1:3:6 ratio using cement. 20mm HBG metal and sand, (30' RCC pole, DP structure materials, Bed channel, S/ C AB switch, 5'6" channel cross arm, HG Fuse, LAS, Pin Insulators, center support, M.S Angle 50x50x6 stay sets (if required), erection of earth electrode and construction of 4 nos of earth pit, GI wire No.6 for earthing all metal parts, Copper No. 4 wire for earthing of 9 KV Lightning arrestor and separate earthing for Transformer LT earth bush, painting 2 coat of aluminium paint for all channels, metal parts etc. and two coats of cement colour painting, to RCC pole etc., including cost of concreting materials such as cement,20mm HBG Metal, sand, aluminium & cement paint, copper No. 2,4 & 16 for jumper connections, HG Fuse arrangement, earthing of LAS, 'B' Class G.I Pipe 50mm dia for earthing, 12 mm alkathene pipe, HT/LT Danger & name board SS, MS 5/8 bolt nuts & washers (required size ) etc., Including loading and unloading charges for DTRs from Mahe Sub-Stores to work site

Labour charges for fixing of Tapping channel cross arm with suitable clamp

Supply and Labour charges for providing of LT feedering arrangement for taking connection from the LT bush of the transformer including supply of 50x10mm aluminium flat and aluminium socket for cable, required quantities of 3 1/2 x 300 Sq. mm LT UG Cable (as per site requirement)

Labour charges for fixing of side arm support