Directorate Of Sports And Youth Affairs Tender

7.1.1 : Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand)

50.6.2.2 : Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

13.46.1 : Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

od11324/2017_2018 : Providing and fixing 40 mm dia nominal bore B class G.I. pipes complete with synthetic enamel paint with two coats over a ready mixed priming coat, both of approved quality,fixing the post on concrete foundation,including anchoring the post into foundation and wall,cutting and making good the walls etc. complete as per the direction of Engineer in charge.<br>

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od11811/2017_2018 : Providing and fixing 50 mm dia nominal bore B class G.I. pipes complete painting with synthetic enamel paint two coats over a ready mixed priming coat, both of approved quality, including cutting,welding, fixing etc. complete as per the direction of Engineer in charge.

od11812/2017_2018 : Providing and fixing 32 mm dia nominal bore B class G.I. pipes complete, painting with synthetic enamel paint two coats over a ready mixed priming coat, both of approved quality, including cutting,welding, fixing etc. complete as per the direction of Engineer in charge.

16.70.1 : Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm

od11813/2017_2018 : Supplying and stacking coarse sand (zone III) for measurement and spreading the sand in the volley ball pit.

od12037/2017_2018 : Providing and laying sub base for the synthetic Tennis field according to the drawings approved by ITF to suitable thickness and composite strength. A chemical treatment for pests and vegetation control, 100 mm thick soling with soling stone 75 mm and below and blinding materials,providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 75 mm ) to wet mix macadam (WMM) specification, providing and laying dense graded bituminous macadam,minimum 30mm thickness including spraying bitumen emulsion at the rate of 0.75kg/sqm and bituminous concrete, minimum 20mm thickness including spraying bitumen emulsion at the rate of 0.2kg/sqm using bitumen 60/70 grade and laying to the required grade, level and alignment, rolling with 8-10MT roller to achieve the desired compaction and finish, constructing a drain of proprietary design with cover to dispose the field water and to receive the synthetic surface complete in all respects and as directed by the Engineer-in-charge.

od12038/2017_2018 : Supply of International Tennis Federation ( ITF) classified/Recognized standard category 3 medium Tennis acrylic surface (8layer) according to International Tennis Federation approved drawings, specifications, methodology. The materials required are a suitable acrylic surface, which consists of a primer coat(if required) , filling of crack and levelling the surface with suitable acrylic surface and levelling compound, resurfacer/ pore filler , of cushion system, premixed acrylic topping and concentrated final acrylic layer with game line markings. All these materials should be ITF approved. The supply to include all taxes, duties, levies, GST,Service tax , excise duty and other charges, applicable taxes, but excluding custom duty which considered as exempted. On net delivered to site basis all complete.Design, receive material, installation testing commissioning of synthetic surface for Tennis courts including, laying, the synthetic surface over the base with all ancillary works, all according to methodology and drawings and specifications, approved by ITF including line marking to ITF specification etc all complete.

BALL PASS WALL FOR VOLLEYBALL PRACTICE

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.22A.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

13.4.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 coarse sand)

14.66.1 : Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface

50.18.9.3.2 : Providing and fixing PVC pipes includes jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 25 mm dia 10KGF/cm2

16.68 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Electrical works

Supply and installation of Hot dipped Galvanised tubular swaged pole of 90 micron zinc coating of overall length of 8Mtrs long single arm as per IS2713.The pole shall have an outside dia 125mm,100mm and 75mm for the sectional length 4.00+2+2 mtrs along with required base plate welded at bottom.The pole shall be provided with suitable RCC foundation.The loop in loop out box shall have 3 phase power connector of required current rating for loop in loop out of cable,6A C curve SP MCB.

Supply,installation,testing and commisioning of 120W LED flood light fittings in the existing pole by nessasary clamps including all connections complete as required.(Make : Havells /Bajaj/ Crompton greeves/Lighting Technology etc or any approved PWD make)

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.4CX6 Sqmm Al armoured cable

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date.4CX16 Sqmm Al armoured cable

Supply of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium /copper conductor cable conforming to IS 7098 (Part 1) amended upto date. 3CX1.5 Sqmm Cu unarmoured cable

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade up to 35 sq.mm in ground including excavation and refilling the trench etc. as required, but excluding sand cushioning and protective covering.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade upto 35 sq. mm (clamped with 1mm thick saddle) on wall surface as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.20mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm

Supply and laying 12 SWG copper wire at 0.6m below ground level including excavation and refilling or on surface with mounting saddles for conductor earth electrode including welding etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs for 4x10Sqmm of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.

Supply and installation of sheet, steel, phosphatised and painted dust and vermin proof enclosure of outdoor type MCB DB (IP 65) including copper/brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on floor in suitable foundation using suitable anchor bolts, making good the damages, colour washing etc. as required. 8 way (4 + 24), Double door- Double cover TPN vertical DB with provision for Fixing 4P MCB /isolator /RCBO/RCCB as incomer and SP/TP MCB as outgoing (IP 65)

Supplying and fixing 5 amps to 32 amps rating single pole, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Fabrication and fixing of additional GI frame of suitable size for fixing two numbers of flood light fittings and providing 8 Nos cross bars of suitable size for maintenance purpose in the existing pole after proper painting with necessary accessories complete as required

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal/ coke and salt) as required.