Visvesvaraya Technological University Tender

code04 - Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills,facias and similar locationsof required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up,including rubbing, curing, moulding and polishing to edges to give highgloss finish etc. complete at all levels. Area of slab over 0.50 m2

code05 - Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge

code06 - Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location inGranite, including necessary holes for pillar taps etc. including moulding,rubbing and polishing of cut edges etc. complete.

code07 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness,well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm and down size graded crushed coarse aggregates

code08 - Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code09 - Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double grovesection 2.683 kg/m and bottom 46 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be throughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section anodized to powder coated to minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality.

code10 - Providing and fixing Angle cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete -

code11 - Providing and fixing Sink cock with swivel spout & wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete

code12 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia pipes

code13 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per directionof Engineer in Charge. External work

code14 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

code15 - Providing and fixing white vitreous china wash basin including making all connections but including the cost of fittings : Flat back wash basin of size 630x450 mm

code16 - Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 g

code17 - Gas pipe line

code18 - Gas Burners

code19 - Electrical Works: Supplying heavy gauge PVC conduit pipe 25mm dia, 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.

code20 - Extra for Groove cutting in brick wall to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.

code21 - Extra for Groove cutting in CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete.

code22 - Supplying GI flexible conduit pipe 25 mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300 mm using NF screws and on either end of the pipe terminated completely.

code23 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. Make: Anchor/Havells/Finolex/ 1.5 Sqmm multistrand copper wire

code24 - 2.5 Sqmm multistrand copper wire

code25 - 4.0 Sqmm multistrand copper wire

code26 - Supplying and fixing surface mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. Make: Anchor Roma/Havells Crabtree/Legrand/ 3 module

code27 - 8 module

code28 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. Make: Anchor Roma/Havells Crabtree/Legrand/ 3 module

code29 - 8 module

code30 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Make: Anchor Roma/Havells Crabtree/Legrand/ 6 Amps one way switch

code31 - 6 Amps three way socket

code32 - 16A One Way Switch

code33 - 6/16A Universal Socket

code34 - Stepped Fan Regulator Two Module

code35 - Supplying and fixing of T8 36/40W Fluorescent Tube with 36W power consumption with initial lumen of 2750 (3000degK/4000degK) with rated avg life of greater than 10000hrs. Operating voltage range from 180V to 265V. 50Hz AC power Supply. Make: Bajaj/Crompton Greaves/Havells/Pihilips/Wipro

code36 - Supplying & fixing of 230 V 20/40 W starter forFluorescent Lamp. Make: Bajaj/Crompton Greaves/Havells/ Pihilips/Wipro

code37 - Supplying & fixing of 230 V 20/40 W Fluorescent Lamp holder. Make: Bajaj/Crompton Greaves/Havells/ Pihilips/Wipro

code38 - Supplying and fixing of 40W heavy duty open construction Ferromagnetic copper ballast for fluorescent tubes: Supplying and fixing of 40W heavy duty open construction Ferromagnetic copper ballast for fluorescent tubes, Class H Insulated copper wire,Vacuum impregnated high quality with Low loss silicon steel lamination operated on 240V, 50Hz supply with IEC 60920 (Safety) & IEC60921 (Performance). Operating voltage range from 180V to 265V, 50Hz AC power Supply. Make: Bajaj/Crompton Greaves/Havells/ Pihilips/Wipro

code39 - Providing 6 kg Fire Extinguisher Mono Ammonium Phos phate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 9.5 Kg, empty weight 3.5 Kg, Can Height 435MM, Diameter 160MM, Discharge Time less than 9 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,8,C and electrically started Fire, A Rating 3A, 8 Rating 218, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy PoIyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete. IS 15683 Approved, CE Marked Make: Andex/Ceasefire/Minimax

code40 - Supplying of first aid box Complete.

code41 - Supplying of FIRST AID CHART with lamination complete.