Public Works Department Tender

SOLID PANEL PVC DOOR SHUTTER Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for styles and 15x15mm for top & bottom rails, covered with heat moulded PVC channel of 5mm thick sheet & 30 x 50mm wide to form styles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the styles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 9-27.1: Fixing of Door frames in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

Supplying and Fixing Hold fasts MS , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., Complete as per manufacturers & standard technical specification, design and directions of Engineer-in-charge of work .

Supplying and Fixing Hinges 5" heavy duty , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., Complete as per manufacturers & standard technical specification, design and directions of Engineer-in-charge of work .

Supplying and Fixing Tower bolt 300 mm long , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., Complete as per manufacturers & standard technical specification, design and directions of Engineer-in-charge of work .

Supplying and Fixing Door lock , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., Complete as per manufacturers & standard technical specification, design and directions of Engineer-in-charge of work .

Supplying and Fixing 150 mm power coated Handles, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., Complete as per manufacturers & standard technical specification, design and directions of Engineer-in-charge of work .

Supplying and Fixing Nail and screws wherever necessary , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., Complete as per manufacturers & standard technical specification, design and directions of Engineer-in-charge of work .

KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, including cost and conveyance of all materials with all lead and lift,Fixtures, loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work. Specification No. KBS 7.12

KSRB 7.5 : Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories, painted with a coat of red lead paint (without top cover) , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work. Specification No. KBS 7.10/7.12- Shutter size 3.00mx2.8 m.

KSRB 7.6 : Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting, cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work. Specification No. KBS 7.10.6 I 7.12.

KSRB 15.8.3: Providing and fixing suitable plaster mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, Junction between RCC and brick walls , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification, design and directions of the Engineer incharge of work. (length of mesh only be measured for payment) - suitable plaster mesh 200mm wide.

KSRB 4-2.12 : Extra for providing throating or drip moulding to R.C.C. chajja with plastering including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work .

KSRB 8.5 : Providing and laying cinder concrete in cement 1:15 (1 cement: 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs, laid to slope compacting, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work .

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, plinth and cills, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work . Specification No. KBS 4.1, 4.2

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, plinth and cills, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work . Specification No. KBS 4.1, 4.2

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, plinth and cills, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work . Specification No. KBS 4.1, 4.2

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 ems. thick, well compacted, in foundation, plinth and cills, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work . Specification No. KBS 4.1, 4.2

Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work .

Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work .

Providing and laying flooring using prepolished, gang saw/water cut 19mm thick granite laid with a bed of 20mm thick 14 em & JOinted with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - using silver grey granite I Multy Red I Ruby Red I Black I Hassan Green I River Pink Granite of width not less than 1200mm.

Providing and laying flooring using prepolished, gang saw/water cut 19mm thick granite laid with a bed of 20mm thick 14 em & JOinted with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - using silver grey granite I Multy Red I Ruby Red I Black I Hassan Green I River Pink Granite of width not less than 1200mm.

Providing and laying flooring using prepolished, gang saw/water cut 19mm thick granite laid with a bed of 20mm thick 14 em & JOinted with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - using silver grey granite I Multy Red I Ruby Red I Black I Hassan Green I River Pink Granite of width not less than 1200mm.

Providing and laying flooring using prepolished, gang saw/water cut 19mm thick granite laid with a bed of 20mm thick 14 em & JOinted with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - using silver grey granite I Multy Red I Ruby Red I Black I Hassan Green I River Pink Granite of width not less than 1200mm.

Providing and laying flooring using prepolished, gang saw/water cut 19mm thick granite laid with a bed of 20mm thick 14 em & JOinted with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - using silver grey granite I Multy Red I Ruby Red I Black I Hassan Green I River Pink Granite of width not less than 1200mm.

Providing half nosing for 20mm thick granite slab , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

Providing and fixing skirting of300mm height using prepolished water cut/gang saw of 19mm thick grey granite 0.5mm wide chamfered width and depth and fixing in CM 1:4 of 20mm thick after chipping the walls etc., , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 14.14-5: Providing Ceramic tiles 400 x 400mm of approved make on a bed of 20mm thick , shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1 3 mix, flush pointing with white cement using colour pigment , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 14.14-5: Providing Ceramic tiles 400 x 400mm of approved make on a bed of 20mm thick , shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1 3 mix, flush pointing with white cement using colour pigment , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 14.14-5: Providing Ceramic tiles 400 x 400mm of approved make on a bed of 20mm thick , shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1 3 mix, flush pointing with white cement using colour pigment , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 14.14-5: Providing Ceramic tiles 400 x 400mm on a bed of 20mm thickof approved make, shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1 3 mix, flush pointing with white cement using colour pigment , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,curing and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work .

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including scaffolding , cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 15-15.1:Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work- with primer.

KSRB 15-18.1:Applying red lead ready mix priming coat over new steel or other metal surface including preparing the surface after throughly cleaning oil, grease, dirt and other foreign matter, and scoured with wire brushes, fine steel wool, sand papers , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 15-18.2: Providing and applying enamel metal painttwo coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 15-17.4 :Applying priming coat over new wood surface and I or wood based surface, after brushing with ready mix enamel priming paint including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 15-17.16 : Providing and applying painting two coats (excluding priming coat) on new wood surface and I or wood based surface with coal tar paint to give an even shade after cleaning the surface of all dirt, dust and foreign matter, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, 110mm dia medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work. Specification No.KBS 13.2.15.1 I 13.9 (for internal water supply connection) .

ISOPROOF SEALER Providing waterproof treatment to roof slab using 2 coats of acrylic co polymer elastomeric ISOPROOF sealer & protector. The surface shall be prepared free of tar, dust, fungus, loose particles etc.,The surface shall be applied with basecoat of crystallization liquid and then ISOPROOF, wetting agent and liquid (1:1:6) over the prepared surface. In addition the surface shall be provided with polysulphide/ acrylic sealant to V groves, making haunch at junction of parapet and roof slab and at damaged portion using patching mortar to drain off rain water. Over this one coat of flexible cementatious membrane (FCM), Spreading 2 layers of 40 gsm non woven geotextile membrane as reinforcing material (over FCM) with one primer coat of ISOPROOF & applying second coat of ISOPROOF liquid over the primer coat - conforming to ASTM D 412 - 1992, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work. standards & methodology : 1. surface Preparation-The surface shall be made free from all dirt, fungus, loose particles by using wire brush. The surface shall be cleaned with solvent like xylene, Toluene, Benzene, dilute hydro chloric acid. i) Cutting of -Grooves : The V shaped grooves shall be cut along the location of all the visible cracks. The-Grooves shall be of size 5mm as directed by the Engineer in charge. 2. Primary reduction of water permeability:The concentrated crystallization liquid of specific gravity 1.09 is lightly diluted and applied on the prepared surface. The sodium acetate formed during the chemical reaction penetrates inside the pores of the concrete and reacts with water to form crystals to block the pores of the concrete, there by reducing water permeability. 3. Porosity and voids reduction (base Coat application):Applying wetting agent consisting of acrylic monomer, co-polymer liquid and crystallization liquid as base on the prepared surface and V groove and cracks etc. 4. application of sealant / Patching mortar: Cracks will be sealed using suitable sealant or patching mortar. These make them ideally suited for joint treatment. Its adhesion is very strong & binds with the building materials such as concrete, and take care of expansion and contraction in the structures. 5. levelling course using Flexible Cementatious material A concrete mix in the ratio 1:1.5:3 (1:cement : 1.5 quartz powder : 3 graded stone) is laid to make haunch at junction of parapet and roof slab and at damaged portions to drain off water. The factory made dry CEMENTATIOUS silica sand power consisting of dry cement mortar (1 cement : 4 silica sand) shall be mixed with additives like ISOPROOF chemical and acrylic polymer and water to arrive at workable consistency. The same shall be applied over the prepared surface to give even surface and act as base for geo- textile fabric. 6. non woven Geo textile Fabric application Two layers of Non-Woven Geo Fabric 40gsm (40=40=80gsm) shall be applied on FCM coating. Geo fabric shall be saturated with acrylic co polymer applied in wet condition. Over this layer, flexible monolithic membrane shall be laid by mixing single component ISO PROOF with water in the ratio of 1:1. 7. Primer Coat: A mixture of acrylic monomer (1:1) ISOPROOF & water mixed in proper proportion will be applied on the geotextile membrane. 8. Final Coat:Application of a coat of ISOPROOF shall be applied at right angles to the primer coat and drying time is about 3 hours. The rate of completion of ISOPROOF for primer and final coat shall not be less than 1.25Kg per Sq meter.

Providing and fixing stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

Providing and fixing stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

Providing and fixing stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

Providing and fixing stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

Providing and fixing stainless steel 304 grade for staircase railings, balconies, ramps, with hand rail, 50mm dia 16 guage hollow pipe welded to vertical hollow 50mm dia pipe of 16 guage, stainless steel vertical pipe spaced at 1.20m regular intervals and 5 Nos of 25mm dia. Stainless steel hollow horizontal pipe are welded to vertical 50mm dia hollow pipe. The entire assembly is fixed to staircase concrete by using expansion bolts by drilling concrete etc., including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.

KSRB 9.4-1 : Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work. SpecificationNo. KBS 9.33.

KSRB 9.5-1 : Providing and fixing in position fully panelled Teak wood shutters for doors, with styles and rails of 40mm. thick with bottom and lock raiIs 180mm wide top rail and styles 1OOmm wide as per drawing and panels of 25mm thick including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., Complete as per manufacturers & standard technical specification, design and directions of Engineer-in-charge of work . (excluding cost of fixtures) Specification No. KBS 9.34

Supplying and Fixing 20cms Aluminium tower bolt , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., Complete as per manufacturers & standard technical specification, design and directions of Engineer-in-charge of work .

KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26. 7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar do- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality,including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In Ground Floor.

KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26. 7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar do- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work- First Floor.

KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26. 7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality. In Second Floor.

KSRB 7.11 : Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26. 7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work- using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality. In Third Floor.

KSRB15-3.6 : Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required srnooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In Basement Floor.

KSRB15-3.6 : Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required srnooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In Ground Floor.

KSRB15-3.6 : Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required srnooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In First Floor.

KSRB15-3.6 : Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required srnooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work- Second Floor.

KSRB15-3.6 : Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required srnooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work- Third Floor.

KSRB15-3.6 : Providing 15mm thick cement plaster in single coat with cement mortar 1:6 to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges,curing and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - Terrace Floor.

KSRB15-3.8 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work- Extra for providing and mixing waterproofing compound in cement plaster work in Brick masonry at one kg per bag or in the proportion recommended by the manufacturers - In Ground Floor.

KSRB15-4.4 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - Extra for providing and mixing waterproofing compound in cement plaster work in Brick masonry at one kg per bag or in the proportion recommended by the manufacturers - In First Floor.

KSRB15-4.4 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - Extra for providing and mixing waterproofing compound in cement plaster work in Brick masonry at one kg per bag or in the proportion recommended by the manufacturers- In Second Floor.

KSRB15-4.4 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work -Extra for providing and mixing waterproofing compound in cement plaster work in Brick masonry at one kg per bag or in the proportion recommended by the manufacturers - In Third Floor.

KSRB15-4.4 : Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - Extra for providing and mixing waterproofing compound in cement plaster work in Brick masonry at one kg per bag or in the proportion recommended by the manufacturers - In Terrace Floor.

KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4 to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In Ground Floor.

KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4 to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In First Floor.

KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4 to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In Second Floor

KSRB15-5.1 : Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4 to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding,including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, Curing, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In Third Floor.

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In Ground Floor.

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - In First Floor.

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - Second Floor.

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - Third Floor.

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter, including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges, labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work - Terrace Floor.

KSRB 15-15.1:Providing and applying painting in two coats with plastic emulsion paint with Primer of approved brand and shade on ceiling and I or sloping roof to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, , including cost and conveyance of all materials with all lead and lift,loading and unloading,hire charges of Machinery and equipments,transportation charges,labour charges and all other incidental charges etc., complete as per standard technical specification,design and directions of the Engineer incharge of work.