New Mangalore Port Trust Tender

KSRRB M400-17. Providing, laying, spreading and compacting crushed stone aggregates of granite I trap I basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406 KSRRB M400- Construction of Median and Island with soil taken from Roadway cutting

KSRRB M600-1. Providing and Constructing dry lean cement concrete mix CC 1:5:10 base with OPC 25mm and down size graded granite metal coarse aggregate at 0.86cum and fine aggregates @0.58cum over a prepared sub-base, coarse and fine aggregate conforming to IS: 383-2016, aggregate cement ratio not to exceed 15:1, Aggregate gradation after blending to be as per Table 600-1, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per specifications with OPC at 150 kg/cum and coarse aggregate 0.86cum, fine aggregate 0.58cum using Concrete Batch mix Plant at 75 cum/hr capacity with fixed form paver. Clause 601 of MORTH V Revision and IS 456 Table-5

KSRRB M600-2. Providing and Constructing un-reinforced, dowel jointed, plain cement Pavement Quality concrete for pavements using Grade concrete M40 having Flexural strength not less than 4.50 Mpa over a prepared base with OPC, coarse aggregate at 0.64 cum, fine aggregates at 0.36 cum, Coarse and fine aggregate conforming to IS:383- 2016 and Table 600-3 of MORTH V Revision, with Superplastizer at 3 Its conforming to IS 9103-2008. loading materials to batch mix plant by front end loader, mixed in a cement concrete batch mix plant as per approved mix design, transported to site in transit truck agitator 5 cum capacity, laid with Paver, compacted and finished in a continuous operation as per IRC-15 including cost for providing of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane of impermiable plastic sheet of 125 micron, groove cutting, sealant primer joint sealent, debonding strip, dowel bars at 9 kg/cum, tie rods at 1.15 kg/cum, admixtures as approved, curing compound, finishing to lines and grades, textured with texturing machine, and curing including cost of all materials, labour, hire charges of machineries, all lead & lift charges etc., complete as per specifications. Clause 601 of MORTH V Revision and IS 456 Table-5 with OPC at 420 kg/cum and coarse aggregate 0.64cum, fine aggregate 0.36cum using Concrete Batch mix Plant at 75 cum/hr capacity

KSRB 4-1.2 : Providing and laying in position plain cement concrete of Mix 1:3:6 with OPC @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2

KSRB 4.2.1 Providing and laying in position reinforced cement concrete of Design Mix M25 with OPC@ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70 cum and fine aggregtes @ 0.47cum, with super plasticisers@ 3 liters confirming to IS 9103-1999 reafirmed-2008 at machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters, columns pillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and I or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specifications. Specification No. KBS 4.6.3 do- - TMT bars Fe 500

KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth cills and string courses cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2

Dismantling size stone masonry in clay mortar and stacking the size stone within a radius of 50m and removing the debris to a distance upto 200m. including cost of materials, labour, HOM complete as per specifications.

KSRRB M200-12.1. Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts complete as per specifications. i) Lime /Cement Concrete. I. By Mechanical Means. A. Cement Concrete Grade M-15 & M-20. MORTH Specification No. 202

KSRB 5.2 : Providing and constructing granite I trap I basalt size stone masonry in foundation with cement mortar, stone hammered dressed in courses not less than 20 cms high, bond stones at 2m. apart in each course including cost of materials, labour, curing complete as per specifications. KBS 5.1.13 KSRB 5.2-3 : do- - cement mortar 1:6 KBS 5.1.13

KSRB 5.2-3 : Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications, KBS 5.1.13 - Available Stone

KSRB 4-1.6 ; Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @0.53cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2

KSRB 15.1 Providing flush pointing 20 mm deep to square rubble, course or uncoursed stone masonry with cement mortar after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per specifications.

KSRB 2.3 : Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering with lead upto 50 m. and lift upto 1.5 m. including cost of all labour complete as per specifications. specification. No. KBS 2.9

Removing and stacking of paver blocks, including cost of removing charges, stacking charges, tools and plant and all other incidental charges complete as instucted by departement

KSRB 14.6: Providing and laying heavy duty cobble stones interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between JOints, final compaction of paver surface JOints into its final level, including cost of materials, labour and HOM complete as per specifications. Specification No. KBS heavy duty cobble stones 60mm thick

Providing and laying available heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM of machineries complete as per specifications. Specification No. KBS

Providing and laying reinforced cement concrete pipe NP3 for culverts including pointing ends, and fixing collars with cement mortar 1:2 including cost of all materials, labour, curing, including cost of materials, labour, HOM complete as per specifications. Specifications. No. KSRB 1000, 2300 MOST Specification No.1000 I 2300 600mm. dia

KSRB 15-19.1 Providing and applying ready mix priming coat over concrete I masonry I asbestos cement sheet I plastered surfaces including preparing the surface after thoroughly cleaning of oil, grease, dirt and other foreign matter, and sand papering including cost of materials, labour, complete as per specifications.

KSRB 15-20.1 : Providing and applying floor painting two coat with ready mix paint in (excluding priming coat ) on new concrete I asbestos cement sheet!plastered surfaces brushing to give an even shade after preparing the surface after thoroughly cleaning oil, dirt, dust other foreign matter and sand papering including cost of materials, labour, complete as per specifications.

Providing & fixing 150mm 6kg/cm2 PVC drain water pipes including cost of material, transportation charges, cutting charges and all other incidental charges etc. comlete.

Providing & fixing 4mm thick ACP Sheet with Single side Reflective sticker Assembly Point Boards of 2' diameter, including cost of matreial, sticker charges, Labour charges, Earth work, concrete, 50mm GI B class Pipe and all other incidental charges etc. complete as instructed by Department - 600MM Circular Type

Providing & fixing 4mm thick ACP Sheet with Single side Reflective sticker Assembly Point Boards of , including cost of matreial, sticker charges, Labour charges, Earth work, concrete, 50mm GI B class Pipe and all other incidental charges etc. complete as instructed by Department - 600 MM Equilateral triangle

Providing and fixing of road stud of size 100x100mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflector, installed in concrete or Asphaltic surface by drilling hole 30mm upto depth of 60mm and bedded in a suitable bituminous grout or epoxy mortor, all as per BS 873 part 4-1973 including cost of materials, labour charges, loading & unloading charges, fixing charges, lead & lift, transportation etc. complete

TOTAL AMOUNT Rs.

1. Only the highlited cell to be filled. (Name of bidder and Rate)

2. GST as applicable shall be claimed as separate line item in tax invoice and the same will be paid separately

3. Contractor shall file the applicable returns with tax department in time and submit the same as documentary evidence