Ministry Of Road Transport And Highways Tender

a. 90 cm Equilateral triangle

b.60 X 45 cms Rectangular

Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 - 2012 , fixed over aluminium sheeting, 2 mm or aluminium composite panel 4mm thick with area not exceeding 0.9sqm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing.The item includes earthwork excavation, Cement Concrete M-15 grade, 2 coats of approved colour synthetic enamel painting to the steel surface, as per clauses, including curing, cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete reflective warrenty as per IRC:67-2012 and as per the direction of the Engineer-In-Charge for successful completion of work.Supported on a class B GI pipe 80mm outer dia , 3.50 mtrs long made of high intensity grade Micro Prismatic type IV sheeting, as per table 6.6(Village Name)

Painting the road surface using approved quality Thermo Plastic material (homogneiously composed of aggregates, pigment, resings and glass reflcetorising beeds) confirming to Clause-803.4.2.2 applied hot either by screeding or extension process at the rate of mentiones area of painted surface using suitable machine capable of controlled preparation and laying with surface applicator of glass beads at 250gms/sqmtr allowing cooling to ambient pavement temperatutre, that shall produce an adherent pavement marking of minimum specified thickness including barricading for traffic diversion as per IRC:35 cleaning the surface of dirt, dust and other foreign matter, demarcation at site, barricading for traffic diversion, traffic control including cost of all materials, labour, loading, unloading, lead, lift, transporting with all other incidental charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work. 5.50 kg per Sqm 2.5mm thick

Construction of Sub-grade and Earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 in layers not exceeding 250mm thick and compacting it by mechanical means after adding water to its OMC, so as to achieve 97% compaction of maximum dry density and finish the surface to the required camber, grade and cross section etc., spreading by Dozer, grading by motor grader, consolidation by vibratory road roller and carriage by tipper including lead & lifts, loading, unloading, all labour, hire charges of machinery etc., complete with all other incidental charges and as per the direction of the Engineer-In-Charge for successful completion of work(New Formation)

Providing and fixing of Reflective Raised Pavement marker (RPM’s) / Cat eyes / Road studs confirming to ASTM D4280 type - H, having reflective panels made of prismatic lens of total internal reflection, the prismatic lens should be electronically fixed (welded) to body made of polycarbonate mould, with a height of 20mm size of 130mm X 105mm and reflecting area of 13 Sq Cm with the slope of retro reflective surface the RPM's should be fixed by using two numbers of polymetric shanks using appropriate adhesive as recommended and certified by RPM manufacturer. The raised pavement marker should support a sufficient minimum load of 13635 Kg in accordance with ministry specification. The test certificates of the product and purchase lots certificate issued by the supplier should be produced at the time of billing. The RPM's should be got approved by the Engineer-In-Charge of work before fixing at site for successuful completion of work The cost is inclusive of all lead lift, transportation, labour, fixing in position firmly, Transportation charges, all taxes cost and conveyance of all materials, labour, hire charges of machinery, with all other incidental charges etc., complete reflectivity warrenty as per IRC:67-2012 and as per the direction of the Engineer-In-Charge for successful completion of work.

Providing and constructing of 5 to 15 nos rumble strips covered with bituminous concrete 15-20mm high at the centre , 250mm wide placed at 1m centre to centre at approved locations to control speed , marked with white strips of road marking paint.

Reflective stickers for crah barrier/Tress/Electrical poles size 100 X 150 mm: Providing and fixing of Retro Reflective sheet as per IRC:67-2001 made of high barrier mountinh ISMC channel on both sides to ensure the safety of night driving including cost of glue/adhesive labour, material, loading, unloading all lead & lifts, machineries hire charges, transportation, finshing works and other incidential charges etc., complete and as per the direction of the Engineer-In-Charge for successful completion of work.