Military Engineer Services Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 70,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_MES_370109_1Bid Award Id
ViewTender No
GE (I)/ BEL/ OF 2020-2021Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down chowkhats or frames of area exc 1.5 Sqm and n exc 4 Sqm each all as specified and directed.
10
-
-
... More
Taking down shutters of any description n exc 1 sqm each all as specified and directed.
15
-
-
... More
Taking down shutters of any description area exc 1 sqm and n.exc 2 sqm each all as specified and directed.
10
-
-
... More
Taking down shutters of any description not exc 1 sqm each and refixing in the same opening all as specified and directed.
40
-
-
... More
Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and refixing in the same opening all as specified and directed.
40
-
-
... More
Taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc., all as specified and directed.
450
-
-
... More
M&L for hard core with broken stone or boulders of gauge n.exc 63mm, deposited, spread, levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces as in repairs all as specified and directed.
5
-
-
... More
M&L for cement concrete 1:3:6 type C2, using 40mm graded stone aggregate in foundation filling and mass concrete including demolition of existing plain cement concrete of any description and size and making good disturbed surfaces all as specified and directed.
1
-
-
... More
M&L for plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in surface channels, drains, etc. including necessary form work/ moulds including demolition of existing unserviceable PCC drains of any description and making good the disturbed surfaces all as specified and directed.all as specified and directed.
0.3
-
-
... More
M&L for plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in surface channels, drains, etc. including necessary form work/ moulds including demolition of existing unserviceable PCC drains of any description and making good the disturbed surfaces all as specified and directed.
0.7
-
-
... More
M&L for extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc. all as specified and directed.
30
-
-
... More
M&L for reinforced cement concrete 1:1½:3, type A1 using 20mm graded stone aggregate as in slabs supported on walls/ beams, and in shelves and the like including demolition of existing unserviceable RCC slabs/ shelves of any description and size and making good the disturbed surfaces all as specified and directed.
0.5
-
-
... More
M&L for pre-cast cement concrete solid block masonry, exc 10 cm width, blocks cast in PCC 1:3:6, type C0, using 12.5 mm graded stone aggregate and setting in CM 1:6 including demolition of existing unserviceable PCC block masonry built in cement mortar in any position below or above ground level and making good disturbed surfaces all as specified and directed.
5
-
-
... More
M&L plain cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in coping including use of necessary form work including demolition of existing unserviceable PCC coping of any description and making good the disturbed surfaces all as specified and directed.
3
-
-
... More
M&L for providing precast cement concrete louvres and jallies, 1:3:6, Type C0, using 12.5mm graded stone aggregate, 25mm thick (measured solid) including all mouldings but excluding frame, set in cement mortar 1:4, fixed in repairs, all as specified and as directed.
15
-
-
... More
Cutting, chases for concealed water tubing and making good in CM 1:3 cutting not exceeding 10 cm girth in PCC block walls/ stone walls all as specified and directed.
30
-
-
... More
M&L for 2nd class hard wood in scantling, clean sawn fixed in unframed work including dismantling of existing unserviceable timber scantling 40 Sq.cm and over in section and in any position in un-framed work and making good disturbed members all as specified and directed.
2.5
-
-
... More
Dismantling timber scantling 40 Sq.cm and over in section in any position in un-framed work and re-fixing the same in new or old position all as specified and directed.
0.5
-
-
... More
M&L for use of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc. 200m thick (Horizontal or sloping), flat rough finished surfaces of concrete all as specified and directed.
20
-
-
... More
M&L for use of form work to edges of concrete flats, treads, bands and similar works, for rough finished concrete surfaces, horizontal or sloping, exceeding 10cm but not exceeding 20cm wide all as specified and directed.
15
-
-
... More
M&L for 2nd class hard wood plain fillets, rails, posts, rafters, purlins, etc. square, rectangular or triangular in section, wrought, secured with nails or beads; sectional area exc 6 and n.exc 13 Sq.cm including dismantling of existing timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section all as specified and directed.
600
-
-
... More
M&L for 2nd class hard wood board, 20mm thick, planned on one side and the other clean sawn, with butt joints and fixed with nails in any situation including dismantling unserviceable boarding of any description and making good disturbed members all as specified and directed.
30
-
-
... More
Dismantling boarding of any description and size, fixed in any position with nails and re-fixing the same in new or old situation, with butt joints and fixed with nails all as specified and directed.
20
-
-
... More
M&L for 2nd class hard wood chowkhat or frames, plain, solid, wrought, framed and rebated on the solid rounded or chamfered, put together with glue pinned at joints, fixed in position all as specified and directed.
1.5
-
-
... More
M&L for 35 mm thick second class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 12mm thick plywood BWR 7 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part I, Section 8. Clause 8.24 (a) and fitted to chowkats all as specified and as directed.
40
-
-
... More
M&L for 35mm thick 2nd class hard wood glazed/ gauged shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a) and fitted to chowkats all as specified and as directed.
15
-
-
... More
M&L for 30mm thick 2nd class hard wood glazed/ gauged window/ ventilator shutters, open rebated and prepared to receive glass, gauze, etc. (divided into square with plain, chamfered or rounded, mitred and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (b) and fitted to chowkats all as specified and as directed.
30
-
-
... More
M&L for aluminium frame work as in doors, partitions and windows using powder coated aluminium sections including provision of glazing clips, hinges, handles, etc including dismantling of existing aluminium joineries and making good disturbed surfaces all as specified and as directed.
Notes:
(i) All the aluminium sections provided under this item shall be measured and converted into weight for payment with the designated unit weight mentioned in the manufacturer's catalogue for the corresponding aluminium sections/ fittings.
(ii) The rate quoted deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets.
(iii) Particle board/ glass panels shall be measured and paid separately.
40
-
-
... More
M&L for solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet on both sides reinforced with M.S. Square tube, supplying and fixing in opening as per specification and drawing all as specified and as directed.
50
-
-
... More
M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded prelaminated PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of prelaminated PVC sheets on both sides to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing all as specified and directed
15
-
-
... More
M&L for 18mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination on the other side with white lamination, as in cub board shelves/ cabinet works fixed with screws, fixed in repairs, all as specified and directed
20
-
-
... More
S&F in repairs 6mm thick external teak wood lipping, 18mm wide fixed with nail and finished with French poilsh all as specified and as directed.
60
-
-
... More
S&F MS butt hinges 100mm in size, medium weight, cold rolled all as specified and directed.
220
-
-
... More
S&F MS butt hinges 75mm in size, medium weight, cold rolled all as specified and directed.
120
-
-
... More
S&F 300mm long mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete all as specified and as directed.
40
-
-
... More
S&F aluminium anodised barrel tower bolt 150mm size all as specified and directed.
200
-
-
... More
S&F aluminium anodised barrel tower bolt 100mm size all as specified and directed.
150
-
-
... More
S&F 100mm long extruded section aluminium alloy anodised handles fabricated type all as specified and directed.
116
-
-
... More
S&F 150 mm long extruded section aluminium alloy anodised handles fabricated type all as specified and directed.
220
-
-
... More
S&F 150mm long aluminium anodised hasp and staple, safety type with hinge pin including bolt to hinge plate fixed with screws complete all as specified and as directed.
30
-
-
... More
S&F 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia all as specified and directed.
70
-
-
... More
S&F galvanised steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery all as specified and directed.
25
-
-
... More
S&F in repairs galvanised steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm fixed in panel of joinery all as specified and directed.
20
-
-
... More
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including MS wire (annealed) not less than 0.9mm dia all as specified and directed.
68
-
-
... More
All as described in item No. 47 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders.
30
-
-
... More
M&L for mild steel hold fast and similar small article conforming to Fe-290 Grade-E-165 all as specified and as directed.
120
-
-
... More
M&L for rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters, fixed with angle cleats or other connecting plates conforming to Fe-410-W Gde-E-250 quality-A including dismantling of existing unserviceable mild steel sections of any description and size all as specified and as directed.
950
-
-
... More
M&L for mild steel flats as in wind ties for roof including securing bolts and necessary drilling, conforming to Fe-290 Gde E-165 including dismantling of existing unserviceable mild steel wind ties of any description and size all as specified and as directed.
300
-
-
... More
Dismantling of existing serviceable mild steel wind ties from roof and re-fixing the same including provision of new securing bolts and necessary drilling all as specified and as directed.
200
-
-
... More
S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 including dismantling of existing unserviceable mild steel grill work of any description and size all as specified and as directed.
300
-
-
... More
M&L for Mangalore pattern or similar tiles in roofing, interlocking at side joints, laid dry, including dismantling of existing unserviceable tiles of any description and size and making good disturbed roof members all as specified and as directed.
300
-
-
... More
Dismantling of existing single layer Mangalore pattern or similar roofing tiles interlocking at side joints, laid dry and re-laying the same in new or old position and making good disturbed roof members all as specified and as directed.
100
-
-
... More
M&L for ridge/ hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in CM 1:6 including dismantling of existing unserviceable ridge tiles of any description and size and making good disturbed roof members all as specified and directed.
100
-
-
... More
S&F 6mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls, etc. fixed with L-type or J-type or cranked hook bolts including dismantling of existing unserviceable AC roofing sheets of any description and size and making good disturbed roof members all as specified and directed.
450
-
-
... More
Dismantling of existing serviceable asbestos cement corrugated or semi-corrugated sheets of any description and size from roofs, walls, etc. and re-fixed with L-type or J-type or cranked hook bolts including and making good disturbed roof members all as specified and directed.
50
-
-
... More
S&F 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated sheets in roofs fixed with ‘L’ type or ‘J’ type or cranked hook bolts including dismantling of existing unserviceable AC ridge sheets of any description and size and making good disturbed roof members all as specified and directed
55
-
-
... More
Dismantling of existing serviceable AC ridge sheets of any description and size from roof, etc and re-fixed with L-type or J-type or cranked hook bolts including and making good disturbed roof members all as specified and directed.
30
-
-
... More
S&F pre-painted galvalume coated high tensile corrugated/ trapezoidal profile steel sheets, AZ-70 coating mass, 550 Mpa yield strength, 0.5mm thick (TCT), as in roofing/ cladding fixed with self drilling fasteners as per manufacturers instructions including dismantling of existing unserviceable corrugated roofing sheets of any description and size and making good disturbed roof members all as specified and as directed.
Note: Measurement shall be taken flat as fixed without any allowance for laps, etc.
610
-
-
... More
S&F pre-painted galvalume coated high tensile plain steel sheets, AZ-70 coating mass, 550 Mpa yield strength, 0.5mm thick (TCT), as in ridges, valleys, hips, claddings, etc. fixed with self drilling fasteners as per manufacturers instructions including dismantling of existing unserviceable plain steel roofing sheets of any description and size and making good disturbed roof members all as specified and as directed.
Note: Measurement shall be taken flat as fixed without any allowance for laps, etc.
120
-
-
... More
S&F corrugated galvanised mild steel sheeting with grade of zinc coating 275, 0.63 mm thick, with two corrugation side laps in roofs, walls, etc. fixed with L-type or J-type or cranked hook bolts including dismantling of existing unserviceable CGI roofing sheets of any description and size and making good disturbed roof members all as specified and as directed.
60
-
-
... More
S&F plain galvanised mild steel sheeting with grade of zinc coating 275, 0.8mm thick, in ridges, hips, valley gutter, drip and straight flashings including dismantling of existing unserviceable PGI sheets of any description and size and making good disturbed roof members all as specified and directed.
100
-
-
... More
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap in roof, wall etc fixed with L-type or J-type or cranked hook bolts including dismantling of existing unserviceable corrugated roofing sheets of any description and size and making good disturbed roof members all as specified and as directed.
25
-
-
... More
M&L for 4mm thick Aluminium Composite Panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick aluminium alloy PERALUMAN-100 (AlMg1-NS41), weight not less than 7.6 kg per sqm, complete with all necessary sub-structures, anchors, hardware and fittings to provide a total installation, fixed to existing wooden/ steel members all as per manufacturers instructions, fixed in repairs, all as specified and as directed.
Note: Measurement shall be taken flat as fixed without any allowance for laps, etc.
Make: Alstrong/ Aludecor/ Alucobond/ Eurobond
20
-
-
... More
M&L for providing water proof treatment to RCC roof with acylic polymer heavy duty fibre reinforced coating with the following specifications all as specified and directed.
110
-
-
... More
The RCC roof surface shall be prepared and made free from all dust, loose particles, laitance and sharp edges, fungus, algae, organic matters, etc. including removal of debris outside of MOD premises
-
-
-
... More
All cracks shall be repaired by cutting 'V' groove along the longitudinal section of cracks and filling with polymer modified mortar admixed with Dr. Fixit Pidicrete URP or equivalent at the ratio of 1:5:15 (URP : Cement :Sand respectively)
-
-
-
... More
All potholes and uneven surfaces shall be repaired with polymer modified mortar over a bonding coat of Dr. Fixit Pidicrete URP or equivalent at the ratio of 1:1 (URP : Cement respectively)
-
-
-
... More
Over the prepared surfaces one priming/ efflorescent coat of Dr. Fixit Primeseal or equivalent shall be applied by diluting the primeseal with water at the ratio of 2:1 (Primer: Water respectively)
-
-
-
... More
Over the primered surfaces water proof coating shall be applied with acylic polymer heavy duty fibre reinforced coating of Dr. Fixit New Coat or equivalent consisting of three coats of application to form 1mm thick heavy duty water proofing coating.
-
-
-
... More
NOTE: Water proofing chemicals shall be procured from approved manufacturer with prior written approval of GE. Full quantitiy of fresh chemicals required for incorporating in the work shall be brought to site with sealed containers. Water proofing treatment shall be carried out through authorised applicator of the manufacturer and the contractor shall produce necessary certificate of authentication to the Engineer-in-charge before commence of the work.
-
-
-
... More
M&L for providing roof treatment with APP modified water proofing membrane with the following specifications all as specified and directed.
100
-
-
... More
Removing existing roof/ chajjas treatment of any type like plastic felt/ HP tiles of any description including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris outside of MOD premises
-
-
-
... More
Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surfaces and rendering 10 mm thick in CM 1:3 mixed with water proofing compound and finishing surfaces even and smooth without using extra cement.
Note: Water proofing compound shall be measured and paid separately
-
-
-
... More
Preparation of plastered surfaces by removing dust, dirt & applying oil bound bituminous primer at 0.3 litre per Sqm & providing APP modified water proofing membrane weight not less than 4.5kg/ sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including minimum 10cm side/ over laps & including applying a coat of blown hot bitumen grade 85/25 over membrane at 1.2kg per Sqm & on drying applying a coat of solar reflective bituminous aluminium paint at 0.1kg/sqm.
-
-
-
... More
NOTE: APP modified water proofing membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given IS 16540-2017/ IS 16532-2017. Contractor shall produce necessary test certificate of the manufacturer to the Engineer-in-charge before incorporation in the work. Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work.
-
-
-
... More
S&F PVC (SWR) eaves gutter half rounded 150mm bore including pipe accessories PVC holder bats bolts nuts etc. including taking down existing unserviceable gutters of any description and size and making good disurbed surfaces all as specified and directed.
80
-
-
... More
S&F 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/ columns/ pillars/ posts etc. with necessary clamps/ batten holders as in rain water pipes including taking down existing unserviceable rain water pipes of any description and size and making good disturbed surfaces all as specified and directed.
80
-
-
... More
S&F 4mm thick High Pressure Steam Cured (HPSC) non asbestos fibre cement building board in false ceiling with aluminium anodized snap grids of 60x60cm with Tee section 35x25x1.25mm, angle section 25x25x1.25mm thick including 2mm dia GI hanging wire including all hanger fittings etc and applying three coats of white wash on ceiling including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces all as specified and directed.
100
-
-
... More
S&F 4mm thick high pressure steam cured (HPSC) non asbestos fibre cement building boards as in false ceiling fixed to existing aluminium frame work with screws and provision of two coats of white wash on exposed surfaces of ceiling including dismantling existing unserviceable ceiling boards of any description and size and making good disturbed members all as specified and directed.
50
-
-
... More
S&F suspended false ceiling system with 16mm thick mineral fibre acoustical MINA TUFF EDGE TILES (MIRO LOCK), performance class - I (BS 456, Part 6&7) with bio coating on the exposed face of tiles, module size 600mm x 600mm, laid on 15mm thick SILHOUTTE EXPOSED GRID system, with medium load carrying capacity of 11.68 kg/ sqm, white/ black colour, including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces all as specified and directed.
20
-
-
... More
S&F suspended false ceiling system with 15-20mm thick plaster of paris boards of approved deign/ pattern including moulding/ cornices on GI chicken wire mesh of 10mm aperture x 1mm dia, fixed on 1.25mm thick x 75mm wide GI frame work of size not more than 600mm x 900mm, moulded to requied shape with all necessary arrangements for suspending from roof members with 8mm dia MS round bars spaced at not more than 1m on either way with fixing arrangements and painting the exposed surfaces of ceiling borads with 2 coats of plastic emulsion paint over a coat of primer including dismantling of existing unserviceable false ceiling boards of any description and size alongwith snap grid frame works including making good disturbed wall/ ceiling surfaces all as specified and directed.
20
-
-
... More
M&L for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base for floors including demolition of existing plain cement concrete sub base of any description and thickness and making good disturbed surfaces all as specified and directed.
150
-
-
... More
M&L for 50mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base for floors including demolition of existing plain cement concrete sub base of any description and thickness and making good disturbed surfaces all as specified and directed.
50
-
-
... More
M&L for 40mm thick plain cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in flooring including finishing the surface even and smooth without using extra cement including demolition of existing plain cement concrete sub base of any description and thickness and making good disturbed surfaces all as specified and directedall as specified and directed.
100
-
-
... More
S&F 3mm thick glass dividing strips, 38mm wide, inserted in floor conforming to design all as specified and as directed.
25
-
-
... More
M&L for coloured vitrified tiles, square or rectangular, light shade, 9 to 10mm thick, area of each tile not exc 0.36 Sqm, as in floors/ skirtings, set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of existing unserviceable tiling alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.
210
-
-
... More
M&L for coloured joint free ceramic tiles, edge cut, 9 to 10mm thick area of each tile exc 0.18 Sqm but not exc 0.38 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of existing unserviceable tiling alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.
60
-
-
... More
M&L for coloured joint free ceramic tiles, edge cut, 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:6 including dismantling of existing unserviceable tiling alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.
60
-
-
... More
M&L for coloured non skid ceramic tiles, 6 to 7mm thick area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors, etc. set and jointed in neat cement slurry and pointed in white cement mixed with colouring pigments to match the shade of the tile laid over and including 15mm thick screed bed in cement mortar 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.
110
-
-
... More
M&L for coloured glazed ceramic tiles 200 x 300mm or 300 X 450mm, 7 to 8mm thick on vertical surfaces such as skirting, dados etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with surfaces including 10mm thick backing coat in CM 1:4 including dismantling of existing unserviceable tiling alongwith cement mortar plaster and removing rubbish off the premises all as specified and directed.
160
-
-
... More
M&L for machine cut Kota stone slab, 20-25mm thick, as in flooring, laid and jointed with neat slurry and pointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing complete including 15mm thick screed bed in cement mortar 1:6 including dismantling of existing unserviceable stone tiles alongwith cement mortar beding and removing rubbish off the premises all as specified and directed.
40
-
-
... More
M&L for machine cut Kota stone slab, 20-25mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including bull nosing the edges, rubbing and polishing complete including 10mm thick backing coat in CM 1:4 including dismantling of existing unserviceable stone tiles alongwith cement mortar plaster and removing rubbish off the premises all as specified and directed.
10
-
-
... More
M&L for machine cut Granite stone tiles, 20mm thick, premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over 15mm thick screed bed in cement mortar 1:4 including rubbing and polishing complete including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding and removing rubbish off the premises all as specified and directed.
15
-
-
... More
M&L for machine cut Granite stone tiles, 20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing complete including 10mm thick backing coat in CM 1:4 including dismantling of existing unserviceable stone tiles alongwith cement mortar plaster and removing rubbish off the premises all as specified and directed.
5
-
-
... More
M&L for 55 to 60mm thick machine pressed precast concrete interlocking coloured paver blocks with glossy finish, M-35 grade, any shape and size with glossy finish on top confirming to IS 15658-2006 including dismantling of existing unserviceable paver blocks of any description and size and removing rubbish off the premises all as specified and directed.all as specified and directed.
160
-
-
... More
M&L for sand filling in floors or pavings including watering and consolidation all as specified and as directed.
5
-
-
... More
M&L for chequered cement concrete tiles with grey cement and pigments, 30cm x 30cm x 25mm thick, as in pathways, foors, etc. set jointed and pointed in neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab laid over 15mm thick screed bed in cement mortar 1:6 etc. complete including dismantling of existing unserviceable stone slab/tiling alongwith cement mortar bedding and removing rubbish off the premises complete all as specified and directed.
150
-
-
... More
M&L for plain cement concrete 1:3:6, type C2, (Using 40 mm graded stone aggregate), 75mm thick as in plinth protection, finishing the surface fair and even, in panels & filling joints with mortar, etc. including demolition of existing plain cement concrete plinth protection of any description and thickness and making good disturbed surfaces all as specified and directedall as specified and directed.
150
-
-
... More
M&L for grinding and polishing the existing old Terrazzo/ Tandoor/ Kota stone flooring/ skirting with necessary white cement, marble powder, etc. complete all as specified and directed.
70
-
-
... More
M&L for rendering 5mm thick in cement mortar 1:3 on soffit of roof ceiling, finished fair and even without using extra cement complete all as directed.all as specified and directed.
50
-
-
... More
M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or block masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed.
200
-
-
... More
M&L for rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid separately.
200
-
-
... More
Supply only integral water proofing compound all as specified and as directed.
30
-
-
... More
M &L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane all as specified and directed.
15
-
-
... More
M & L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass of any description and size and making good disturbed surfaces all as specified and directed.
15
-
-
... More
M &L for 5mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane including hacking out old broken glass of any description and size and making good disturbed surfaces all as specified and directed.
15
-
-
... More
M&L for three coats of white wash on newly plastered surfaces of ceilings including necessary preparation of surfaces all as specified and as directed.
25
-
-
... More
M&L for three coats of white wash on newly plastered surfaces of walls, pilasters, cornices, etc. including necessary preparation of surfaces all as specified and as directed.
50
-
-
... More
M&L for two coats of white wash on old decorated surfaces of walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.
300
-
-
... More
M&L for two coats of white wash on old decorated surfaces of ceilings including necessary preparation of surfaces all as specified and as directed.
250
-
-
... More
M&L for two coats of oil bound distemper (Acrylic distemper washable), any colour, over a coat of primer on newly plastered ceilings., including necessary preparation of surfaces all as specified and as directed.
25
-
-
... More
M&L for two coats of oil bound distemper (Acrylic distemper washable), any colour, over a coat of primer on newly plastered walls, pilasters, cornices, etc., including necessary preparation of surfaces with chalk whiting all as specified and as directed.
150
-
-
... More
M&L for one coat of oil bound distemper (Acrylic distemper washable), any colour, on old distempered walls, pillasters, cornices, etc., including necessary preparation of surfaces by washing, rubbing down and stopping all as specified and as directed.
3000
-
-
... More
M&L for two coats of cement based paint, any colour, over a coat of primer on newly plastered surfaces of walls, pilasters, cornices, etc., including necessary preparation of surfaces all as specified and directed.
200
-
-
... More
M&L for one coat of cement based paint on old cement painted walls, pillasters, cornices, etc., including necessary preparation of surfaces all as specified and as directed.
5500
-
-
... More
M&L for one coat of plastic emulsion paint on old decorated surfaces of walls, pillasters, etc., including necessary preparation of surfaces by washing, rubbing down and stopping all as specified and as directed.
100
-
-
... More
M&L for two coats of weather proof exterior emulsion paint on old decorated surfaces of walls, pillasters, roof projections, facias, drops, chajjas, etc., including necessary preparation of surfaces by washing, rubbing down and stopping all as specified and as directed.
2000
-
-
... More
M&L for treating wood and wood based materials, steel and iron work, with tar or coal tar black paint, new or old of any description and girth not otherwise described including necessary preparation of surfaces all as specified and as directed.
35
-
-
... More
M&L for preparing surface of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with one coat of creosote oil all as specified and directed.
250
-
-
... More
M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
400
-
-
... More
M&L for one coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.
200
-
-
... More
M&L for preparation of new steel surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
20
-
-
... More
M&L for one coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.
100
-
-
... More
M&L for preparation of new steel surfaces of any description n exc 10 cm width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed.
40
-
-
... More
M&L for re-writing letters or figures (Block, Roman, Italic or Indian) with and including synthetic enamel paint all as specified and as directed.
150
-
-
... More
S&F 15mm bore unplasticised PVC pipes of pressure rating 10kg/cm2, with all fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable GI tubes of any grade and making good disturbed surfaces all as specified and directed.
190
-
-
... More
S&F 20mm bore unplasticised PVC pipes of pressure rating 10kg/cm2, with all fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable GI tubes of any grade and making good disturbed surfaces all as specified and directed.
100
-
-
... More
S&F in repairs 16mm outer dia Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes fixed to walls/ chases/ ceilings or laid in floors including all crimp type internal sealing planstic metal composite fittings such as elbows, tees, reducers, couplers, short pieces, connectors, etc. and hooks/ clamps complete all as specified and as directed.
10
-
-
... More
S&F in repairs 20mm outer dia Polyethylene-Aluminium-Polyethylene (PE-AL-PE) composite pressure pipes fixed to walls/ chases/ ceilings or laid in floors including all crimp type internal sealing planstic metal composite fittings such as elbows, tees, reducers, couplers, short pieces, connectors, etc. and hooks/ clamps complete all as specified and as directed.
9
-
-
... More
S & F in repairs 15 mm bore Bib tap, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.
100
-
-
... More
S & F in repairs 15 mm bore Bib tap, long body, brass chromium plated, fancy type, with crutch or butter-fly handle, screwed down, screwed for iron pipe or for brass ferrule etc all as specified and directed.
100
-
-
... More
S&F in repairs 15mm bore PTMT bib taps, standard type, (Minimum weight 90gms) any colour, high pressure screwed for iron pipe all as specified and as directed.
330
-
-
... More
S&F in repairs 3 way mixer tap for mixing hot and cold water, fancy type, brass chromium plated screwed down for 15mm bore GI pipe all as specified and directed.
Make: JAQUAR/ JOHNSON/ CERA
20
-
-
... More
S&F in repairs 15mm bore stop valves, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions all as specified and as directed.
40
-
-
... More
S&F in repairs 15mm bore stop valves, fancy type, brass CP, screwed down high pressure, screwed both ends for iron pipe for unions all as specified and as directed.
35
-
-
... More
S&F in repairs 15mm bore stop valves, fancy type brass CP, with long shank and cup (concealed type), screwed down high pressure, screwed both ends for iron pipe for unions all as specified and as directed.
25
-
-
... More
S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm, excluding taps, waste chain and plug and porcelain stopper but including brackets etc complete all as specified and directed.
10
-
-
... More
S&F in repairs mirror of selected quality glass, with bevelled edges, 600mm x 450mm size, mounted on 6mm thick commercial plywood with aluminium beading including glass shelf assembly and fixed to wall with wooden plugs, chromium plated brass screws and cup washers all as specified and as directed.
15
-
-
... More
S&F in repairs tubular towel rod, 'D' type, 20mm dia, 600mm long, brass chromium plated, fixed with suitable CP screws etc. complete all as specified and directed.
35
-
-
... More
S&F in repairs PTMT swivel shower rose, minimum weight 40gms, any colour for fixing with 15mm bore GI pipe, any colour all as specified and as directed.
35
-
-
... More
S&F in repairs vitreous china squatting pan, Orissa pattern, size 580mm x 440mm, white, with integral foot rest (excluding flushing cistern) including 'P' or 'S' trap etc complete all as specified and directed.
10
-
-
... More
S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including 'P' or 'S' trap, plastic water closet seat of any colour as approved by GE, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, fixing bolts etc, connecting to drain pipe and flushing pipe all as specified and as directed.
10
-
-
... More
S&F in repairs syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe etc complete all as specified and directed.
25
-
-
... More
S&F in repairs plastic water closet seat for EWC, closed pattern with flat bottom and cover, any colour as approved by GE and mild steel chromium plated or aluminium hinging device all as specified and as directed.
25
-
-
... More
M&L for bed concrete to 110mm bore drain pipes in Plain Cement Concrete 1:4:8 type D2 using 40 mm graded stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested including demlition of existing unserviceable bed concrete and breaking up drain pipes of any description and size all as specified and directed.
30
-
-
... More
S&F 110mm bore UPVC (SWR) pipes single socketed in any length with rubber ring/ solvent cement joints fixed to walls/ laid in floors/ trenches including taking down existing unserviceable pipes of any description and size and making good disturbed surfaces all as specified and directed.
80
-
-
... More
S&F 75mm bore UPVC (SWR) pipes single socketed in any length with rubber ring/ solvent cement joints fixed to walls/ laid in floors/ trenches including taking down existing unserviceable pipes of any description and size and making good disturbed surfaces all as specified and directed.
50
-
-
... More
S&F in repairs 110mm bore UPVC (SWR) bends any radius all as specified and directed.
40
-
-
... More
S&F in repairs 75mm bore UPVC (SWR) bends any radius all as specified and directed.
10
-
-
... More
S&F in repairs 110mm bore UPVC (SWR) branch piece, single (single Y) equal or unequal with access door all as specified and directed.
5
-
-
... More
S&F in repairs 75mm bore UPVC (SWR) branch piece, single (single Y) equal or unequal with access door all as specified and directed.
5
-
-
... More
S&F in repairs 110mm bore UPVC (SWR) junction, single (singlle T) equal or unequal with access door all as specified and directed.
5
-
-
... More
S&F in repairs 75mm bore UPVC (SWR) junction, single (singlle T) equal or unequal with access door all as specified and directed.
5
-
-
... More
S&F in repairs 110mm bore UPVC (SWR) vent cowl all as specified and directed.
5
-
-
... More
S&F in repairs UPVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm dia outlet all as specified and directed.
11
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements