Military Engineer Services Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 95,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_670717_1Bid Award Id
ViewTender No
8124/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 using 12.5mm graded sotne aggregates as Columns, pillars, piers, posts and struts complete all as specified and directed.
5
-
-
M&L for form work for flat rough finish surface of concrete(square or rectangular or polygonal) for sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
80
-
-
M&L for reinforced cement concrete (nominal mix) Type B1 1:2:4 using 12.5mm sotne aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
12
-
-
M&L for form work for flat rough finish surface of concrete(square or rectangular or polygonal) for form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.
48
-
-
M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
1923
-
-
Excavation in trenches not exceeding 1.5 M deep for foundation etc and getting out in soft / loose soil complete all as specified and directed.
20
-
-
M&L for cement concrete type D2, 1:4:8 (40 mm graded stone aggregate) as in foundation, filling and mass concrete all as specified and dircted.
4
-
-
Demolition of brick work or stone / boulder masonry built in cement mortar including removal of debries outside of Dockyard premises complete all as specified and directed.
6
-
-
M&L for Pre cast cement concrete type 1:3:6 type C-2 (20mm graded stone aggregate) block masonry with solid blocks exc 10 cm in width and setting in cement mortar 1:4 complete all as specified and directed.
6
-
-
M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concete surfaces finished even and smooth without using extra cement complete all as specified and directed.
428
-
-
Supply and fixing for providing precast cement concrete louvres and jallies, 25mm thick (measured solid) type B0 (1:2:4 using 12.5mm stone aggregate) set in cement mortar 1:4 , including all mould- ings but excluding frame complete all as specified and directed.
Note :- Pre cast frame shall be measured separately
150
-
-
Material & labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.
478
-
-
Dismantling posts or struts (wood, steel or R.C.C.) any section embeded cement concrete, brick work masnory, ect, including taking out embedded portion and making good disturbed ground all as specified and directed.
140
-
-
Excavating in post holes (or similar holes) each n exc 0.5 CuM, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil all as specified and directed.
52
-
-
M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundation and mass concrete all as specified and directed.
7.8
-
-
Supply and fix rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 all as specified and directed.
1118.18
-
-
M&L for preparation of new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide/ zinc chrome complete all as specified and directed.
257.66
-
-
Dismantling fencing wire mesh, any type all as specified and directed.
210
-
-
Supply only chain link MS galvanised fencing any size or type all as specified and directed.
840
-
-
Fixing only chain link fencing including line wires, any mesh size and type to any type of strands rails straining bolts etc including provision of binding wire all as specified and directed.
210
-
-
Supply and fix mild steel screw bolts of 5 to 10mm dia of shank (machine made ) with hexagonal or square heads at one end and scewed the other each screwed end to be fitted with washers and one hexagoal or square nut, eceedinng 10cm ad not exceeding 15cm long all as specified and directed.
15.6
-
-
Supply only Mild steel round bars 10mm dia and over for Fe-410-W, (Gde.E-250) quality-A or Fe 290 (Gde -E-165) cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.
215.1
-
-
M&L for providing precast cement concrete solid building blocks (type C1 1:3:6, using 20mm stone aggregate) set in cement mortar 1:4 or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar, complete, in walls complete all as specified and directed.
40
-
-
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.
40
-
-
M&L for preparation of new plastered surfaces of wall and applying two coats of white wash complete all as specified and directed.
40
-
-
S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. not exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.
2716.56
-
-
S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified
510
-
-
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
4
-
-
M&L for providing cement concrete (type B0 1:2:4, using 12.5 stone aggregate) as in coping complete all as specified and directed.
4
-
-
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises and removing debris out side Dockyard all as specified and directed.
90
-
-
M&L for coloured non skid ceramic tiles area of each tiles exceeding 0.11 but not exceeding 0.18 sqm, in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including cement screed 15 mm thick in 1:6 complete all as specified and directed.
10
-
-
M&L for coloured glazed ceramic tiles (300 x 450) x 7-8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over incl rendering in CM 1:4, 10 mm thick complete all as specified and directed.
30
-
-
M&L light shed vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement morter including roughning surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.
50
-
-
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.
0.5
-
-
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed
5
-
-
M&L for rounding to edges of granite stone slabs one edge such as in steps, cooking plateform or any location etc., complete all as specified and as directed.
12
-
-
M&L reinforced cement concrete 1:1.5:3 type A1 (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers posts, beams and struts and simillar work etc including form work complete all as specified and directed.
0.1
-
-
Material & labour for chipping (20mm to 50mm) of existing damaged, spalled & loose portion of concrete of the RCC members completely till the reinforcement is exposed and sound concrete is observed by using mechanical means and manual chisels and further the surface is cleaned with water jet, again clean the surface with blower to remove all loose fine particles present in the surfaces complete all as specified and directed.
200
-
-
M&L for preparation of exposed of rusted steel reinforcement with metal wire brush , cleaning the rusted surfaces free from loose rust and application of rust remover cum passivator with brush to the rusted reinforcement , and removing rust with flex after 24 hours of application of rust remover with the help of wire brush, sand paper and thoroughly washed with water with the help of pressure jet and allowing it to dry complete all as specified and directed.
Note: Area of cleaned reinforcement steel bar shall be measured for payment.
15
-
-
M&L for preparation of surfaces of steel of reinforcement by cleaning and providing, mixing and applying zinc anti-rust agent as per manufacturers method of application to rebar corrosion protection system to reinforcement Fosroc or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch @3.75Kg/Sqm surface of steel reinforcement in two coats complete all as specified and directed.
15
-
-
M&L for applying a coat of Polymer modified cementious bonding coat on the concrete surfaces with one part of Styrene Butadiene Rubber latex emulsion (SBR latex) manufactured by M/s Fosroc chemicals or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch with four parts of water and six parts of cement by weight. Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed.
200
-
-
M&L for providing Shear connectors and Anchoring by drilling 16 mm dia holes up to depth of 100mm in concrete surfaces and fixing 10 mm dia TMT bars L shaped anchor rods as shear connectors by using Fosroc Lokfix chemical or any other equilent make as approved by GE (Mix of base and hardener of the polyester resin) in defective concrete area of the slab / column / beams / chajjas / lintel etc or any other structural member as per site requirement after cleaning the drilled hole by using water jet and after drying clean the surface with blower to remove all loose fine particles present in the hole. The Mix of base and hardener of the polyester resin shall be prepared by thorough mixing of base & hardener by the help of spatula. After preparing the mix the holes shall be filled to a minimum depth of 1/3rd of the hole with the prepared polyester resin and the reinforced bar shall be inserted to full depth of hole and extra length of the reinforcement bar shall be bent into the concrete to maintain proper cover to the reinforcement complete.
40
-
-
M&L for applying polymer modified, cementitious mortar fibre reinforced, single component shrinkage controlled, (Renderoc SP40 of Fosroc Makeor equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch having a compressive strength of 40 MPA strength for reparing of RCC members like columns, Beams / Slab soffits etc. complete all as specified and directed.
4
-
-
M&L for application of polymer modified reinstatement mortar 20mm thick in isolated places of repair works of RCC members with Rendroc S2 of M/s Fosroc make or equivalent in M/S Sika India Pvt. Ltd. / M / S Choksey Chemicals Pvt. Ltd. / M/S Mapei Const Product India Pvt Ltd. / M/S THermax Ltd / M/S STP / M/S Dr Sunanada / M/S BASFor any other approved manufacturer of E-in-C's branch having a compressive strength of 40 MPa complete all as specified and directed.
100
-
-
Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) and removing away from site complete all as specified and directed.
3
-
-
S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 194 of SSR Part -II complete all as specified and directed.
15
-
-
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page no 184 of SSR Part -II complete all as specified and directed.
6
-
-
S&F Stainless Steel butt hinges medium weight of size 100 mm complete all as specified and directed.
9
-
-
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
6
-
-
S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed
6
-
-
S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
3
-
-
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm but n.exc 4 Sqm each complete all as specified and directed.
5
-
-
S&F aluminium door shutter with chowkats made out of hollow aluminium sections as mentioned below; each shutter having 2 Nos. ‘D’ type aluminium handles of 150 mm long, 2 Nos. aluminium tower bolts of 150 mm long and 1 No. mortice lock of 6 lever with key in duplicate; shutters are partly glazed with 5 mm thick sheet glass and partly paneled with 12 mm thick pre-laminated particle board fixed with glazing clips, rubber beadings and aluminium beading complete.
Chowkat size : 101.60 x 44.45 x 2.40 mm (1.608 Kg./RM appx.)
Shutter Top rail : 114.30 x 2.15 mm thick (1.836 Kg./RM appx.) Bottom rail : 150.00 x 2.20 mm thick (2.376 Kg./RM appx.) Middle rail : 83.50 x 1.70 mm thick (1.243 Kg./RM appx.) Vertical rail : 85.00 x 1.80 mm thick (1.302 Kg./RM appx.)
10
-
-
S&F factory made UPVC white colour sliding window three track of area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67 mm). Sliding mesh Sash (42mm x 57mm) sliding interlock (one vertical lenght in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2 + - 0.2mm thick galvanised steel frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware (Touch Lock of zinc alloyed (white powder coated ), steel roller system, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: the unit rate quoted by the contractor excludes cost of glass, steel wire cloth but includes all other connected accessories. Net opening will be measured for payment purpose.
10
-
-
Taking down aluminium shutters of doors, windows/ventilators of any description exc 1 Sqm but not exceeding 4 sqm each for refixing the same in the same opening after replacing of unserviceable screws, cleat, rubber packing, aluminum snap beading etc, and tightening complete all as specified and as directed. Note :- Quoted Rate is inclusive of S&F of new rubber beading, aluminum snap beading, hinges, screws, cleat etc as required at site
20
-
-
Taking down aluminnium shutters of windows, ventilators etc of any description not exc 1 Sqm each and refixing the same in the same opening after replacing of unserviceable screws, cleat, rubber packing, aluminum snap beading etc, and tightening complete all as specified and as directed. Note :- Quoted Rate is inclusive of S&F of new rubber beading, aluminum snap beading, hinges, screws, cleat etc as required at site
31
-
-
Material and labour for partition wall (Pannels of 1.44 sqm (approx) made out of aluminium anodized standard hollow sections 63.50 X 38.10 X 1.95mm thick snap fit beadings, standard rubber gasket, 5.5mm thick sheet glass and 12mm thick pre-laminated perticle board, interior grade, pre-laminated one side with decorative choice lamination and other side balancing light grey lamination complete all as specified and directed.
20
-
-
S&F sheet glass 4.8 mm thick ordinary quality fixed with UPVC beads in squares n.exc 0.5 Sqm in each pane complete all as specified and directed.
2
-
-
S&F in repair 18/19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination fixed with snap beading with aluminium frame partitions work a complete all as specified and directed.
10
-
-
S&F in repair anodised aluminium snap grid frame work of size 605x605mm using main and cross tee of size 15mm x 15mm 1.5mm ( weight not less than 0.12 kg / Rm) and wall angle of size 40mm x 25mm x 2mm ( weight not less than 0.36 kg / Rm) and 10mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, in ceiling with hanger 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceilng cleats made out of GI flat 40x 3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete , including cover fillets complete all as specified and directed.
50
-
-
S&F in repair Perforated particle boards or tiles for insulation and accoustic purposes, 60cm x 60cm in size all as specified and directed.
20
-
-
Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for and directed and removing debries out side to Dockyard premesis complete all as specified and directed.
8.38
-
-
M&L PCC 1:2:4 type B1 type (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.
5
-
-
M&L 75 mm thick cement concrete 1:3:6 Type C2 (using 40 mm graded crushed stone aggregate) in floors (plinth protection) finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.
45
-
-
Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.
420
-
-
M&L rendering 15 mm thick in CM 1:4 using SBR Latex emulsion @ 4% by weight of cement on concrete surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed (Note : 1.Make of SBR emulsion / latex :: Sika, Fosroc, STP,Dr Sunanada, BASF, Star Coatings or any other approved make of E-in-cS branch . 2. Cost of SBR Latexis included with plastering)
150
-
-
M&L for rendering 10 mm thick plaster in CM (1:6) on brick or concrete surfaces of walls the surfaces even and smooth without using extra cement complete all as specified and directed. Note:- Cost of SBR latex emulsion is included in quoted rate
50
-
-
M&L 5 mm thick plastering in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces fair and even without using extra cement all as specified and directed.
20
-
-
M&L for preparing newly plastered and unplastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed.
20
-
-
M&Lfor preparing new plastered surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.
50
-
-
M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a one coat of alkali resistant primer with 1mm thick wall care putty over plastered surface to prepare surface even and smooth complete all as specified & directed.
50
-
-
Complete removal of existing treatment of old decorated surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
250
-
-
Complete removal of existing treatment of old decorated surfaces of wall and applying three coats of white wash complete all as specified and directed.
100
-
-
Complete removal of existing treatment of old decorated surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.
510
-
-
Complete removal of existing treatment of old decorated surfaces of walls and applying two coats of oil emulsion distemper over a coat of alkali resistant primer over two coats of cement based white wall putty of minimum thick ness 1.5 mm (in two coats) and cutting to smooth surfaces by sand paper complete all as specified and directed.
400
-
-
Complete removal of existing treatment of old decorated surfaces of walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer complete all as specified and directed.
450
-
-
Complete removal of existing treatment of old decorated surfaces of walls and applying two coats or more coats of 100% premium acrylic paint having VOC less than 50 gm/litre and UV resistance a per IS 15489:2004, Alkali & fungal resistance, dirt resistance ecterior paint of required shade 9company depot tinted0 with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior promer applied @ 0.9 litre/10 sqm over new surfaces over wall putty of minimum thick ness 1 mm and cutting to smooth surfaces by sand paper complete all as specified and directed.
250
-
-
Dismantling mild steel work of any description complete all as specified and directed.
3.23
-
-
M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channel, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc ., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
73
-
-
M&Lfor MS rolled section of grade Fe-290 Gde -E (beam, tee, angle channel or flat sections) as in framed bracket (framed), including bending welding as neessary including distance pieces, cleats etc. complete all as specified and directed.
250
-
-
M&L preparation of old painted steel surface over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.
100
-
-
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including dismantling existing one complete all as specified and directed.
80
-
-
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedd including dismantling existing one complete all as specified and directed.
15
-
-
Note: The above quoted items are to be executed with proper safety gears and necessary double scaffolding arrangements to carry out the repair works. The rates quoted shall be accordingly considered for all the safety measure, scaffolding, height, lead and lift in the items.
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements