Military Engineer Services Tender

Removing excavated material/soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed.

Supply, erecting & fix in true vertical position galvanised steel tubular swaged poles 7 mtr long, type 410 SP-2 including GI bracket bent to required shape and made from 40mm bore GI pipe medium grade 1.5m long with MS clamps 50x6 mm thickness complete with cast iron base plate, finial taper plug, bolts, nuts & screws including two coats of synthetic enamel paint paint on poles externally, two coats of black bitumnious paint internally complete all as specified and directed (excavation, earth work and PCC shall be measured and paid for seperately).

Supply & Fixing solar 30 watts LED street luminaire for fixing on steel tubular pole including necessary wiring, connection as per engineering practice comprising and including followings : (a) 30 watts LED street light luminaire, pressure die cast aluminium housing, heat resistant glass, IP65 protection with high frequency electronic driver of make Crompton greaves Cat No: LSTN-30-CDL or equivalent in makes Bajaj/Philips/Havells. (b) Tubular maintenance free battery of 12 volts, 100 Ah capacity with minimum autonomy of 02 days with gelled electrolyte having 48 months warrenty of make Exide/Tata Green/Amron. (c) Battery box of suitable size for 12 Volt, 100 Ah battery fabricated from 2mm thick CRCA sheet, dust and vermin proof with locking arrangemnent and necessary ventilation and duly painted with high corrosion resistance primer and finally epoxy polyestor powder coating of flint grey shade (RAL-7032). (d) Solar charge controller with dusk to dawn function, three stage dimming function of 10 Amps suitable for 12 Volts 100 AH battery Make AE or equivalent as approved by GE. (e) High efficiency polycrstalline solar power module 100 watts capacity of Make: Tata BP/BHEL as approved by GE. (f) The unit rate quoted against this item shall be deemed to be included cost of mild steel angle, channel base frame/supports with suitable size nuts, bolts and washer etc for solar module and battery box including two coats of aluminium paint over a coat of red oxide primer on mild steel work. Steel tubular pole shall be measured and paid sperately under respective item.

M & L for PCC 1 : 3 : 6 type C2 using 40 mm graded stone aggregate in foundation of pole or mass concrete complee all as specified & directed

M & L for PCC 1 : 2 : 4 type B1 using 20mm graded stone aggregate for coping of poles including necessary from work complete all as specified and directed.

Supply installing testing and commisioning of sewage submersible pump 5 HP, 3 phase make:- Crompton STPCS 5.52 or equivalent make in Kirloskar.

Supply installing testing and commisioning of sewage submersible pump 7.5 HP, 3 phase make:- Crompton STPCS 5.52 or equivalent make in Kirloskar

Supply and fix nylon ribbed hose 50 mm outer dia heavy duty suitable for suction sweeper includin removal of old hose pipe all as specified and directed.

Supply and erection of chain pulley block type spur gear 2 fall, 10 meter galvanised chains including testing of reputed make having minimum weighing capacity 1.0 ton and length 10 meter all as specified and directed.

Supply installing testing and commisioning of dosing pump of flow rate 1 LPH capacity make Milton Roy metering pump or equivalent suitable for sodium hypochlorite solution with connected LDPE pipings, foot valve, 50 ltrs tank all accessories suitable for chemical dosing all as specified and directed