Military Engineer Services Tender

M&L for Dry & clean river sand cushioning in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable, levelled and punned down to a depth of 100mm above the top of the upper-most cable, for cable protection in trenches, complete all as specified and as directed. Note: The punned down thickness shall be measured for payment.

M&L for Well burnt old size sub Class ‘B’ bricks, laid dry & flat in trenches for cable protection, complete all as specified.

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 4.0core x 10.00Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work, brick protection & sand cushioning shall be measured and paid separately under respective items.

All as per Serial Item No. 6 here-in-before but for cable of size 4.0core x 16.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 4.0core x 25.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 35.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 50.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 70.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 95.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 120.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 150.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 185.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 240.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 300.00Sqmm.

All as per Serial Item No. 6 here-in-before but for cable of size 3.5core x 400.00Sqmm.

S&F IN REPAIR XLPE LT straight through cable jointing kit, heat shrink type joint for 1.1KV (Earthed) grade cable with jointing material and accessories, suitable for 4/3.5 core XLPE armoured aluminium conductor cable of size 6sqmm to 16 sqmm, complete all as specified.

All as per Serial Item No. 19 here-in-before but suitable for cable of size 25 to 50Sqmm.

All as per Serial Item No. 19 here-in-before but suitable for cable of size 70 to 120Sqmm.

All as per Serial Item No. 19 here-in-before but suitable for cable of size 150 to 185Sqmm.

All as per Serial Item No. 19 here-in-before but suitable for cable of size 240 to 300Sqmm.

All as per Serial Item No. 19 here-in-before but suitable for cable of size 400 to 500Sqmm.

S&F IN REPAIR Double compression heavy duty brass cable gland, nickle plated weather proof type, suitable for 1.1KV (Earthed) grade cable 3.5core XLPE armoured aluminium conductor cable of size 35sqmm, complete all as specified.

All as per Serial Item No. 25 here-in-before but suitable for cable of size 50Sqmm.

All as per Serial Item No. 25 here-in-before but suitable for cable of size 70&95Sqmm.

All as per Serial Item No. 25 here-in-before but suitable for cable of size 120&150Sqmm.

All as per Serial Item No. 25 here-in-before but suitable for cable of size 185Sqmm.

All as per Serial Item No. 25 here-in-before but suitable for cable of size 240&300Sqmm.

All as per Serial Item No. 25 here-in-before but suitable for cable of size 400Sqmm.

S&F IN REPAIR LED Post Top outdoor type fitting 15Watt, 230 volts, 100lum/W, with decorative post top for beam angle of ǿ 360°, AC outdoor type with high Pressure Die Cast aluminum Housing and heat resistant toughened glass with frame complete with LED bulb /lamp 15Watt, driver with impact and corrosion resistant complete with IP 65/66 protection, complete all as specified and as directed. Make: Cat Part No. RUBYMINIPT15W LED757 PSYMTOPC of Havells or Equivalent make as specified here-in-after.

S&F IN REPAIR GI pipe light grade pipe 80mm dia for cable protection, laid in trenches /pole / walls / road etc., complete all as specified.

S&F IN REPAIR GI pipe light grade pipe 100mm dia for cable protection, laid in trenches /pole / walls / road etc., complete all as specified.

M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 25mm x 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 25mm x 4mm GI earth strip, including testing after completion, complete all as specified and directed. Note : Quoted rate shall be inclusive for Earth strip upto 7.5m.

M&L for Boring under road / pavement / hard standing by trenchless technology through any type of soil strata, using ultra sound technique and necessary machine with and including HDPE pipe of 100mm bore dia of PN 10 nominal pressure, ISI marked, with and including removing surplus soil to a distance not exc 50m, complete all as specified and as directed. Note: Location of boring shall be as directed by Engineer-in-Charge and noting shall be paid for change in strata if any at site.

S&F IN REPAIR LT Cable route indicator made out of PCC Block 250mm x 150mm size, 900mm long with oval shaped top and two sides engraved with letters "LT CABLE" duly painted with two coats of super enamel silver colour over a coat of primer, with and including embeded in ground of pit size 300mm x 300mm x 300mm deep filled with PCC 1:2:4 (Type B1) as in foundation, including necessary excavation & earthwork, complete all as specified and directed.

S&F IN REPAIR LT Panel as per IEC 61439, Outdoor type, floor mounted free standing dust and vermin proof panel / DB with IP-55 protection, CPRI approved OEM, frame fabricated out of 40mmx40mm x 4mm MS angle iron, made with 3.15mm thick CRCA sheet for entire outer panel and 1.6mm thick CRCA sheet 40mmx4mm MS flat Iron for inner compartments with separate cubicle chamber with cable alley with minimum 300mm width for installation/connecting switchgears with the main bus bar using aluminium bus link or copper conductor flexible wires suitable for switch rating and connecting outgoing terminals of the switchgear with terminal blocks of appropriate current rating using flexible copper wires duly terminated by cable lugs and thimbles, MS surfaces epoxy based powder coated, shade as approved over 2 coats of red oxide primer, surfaces pre-treated in seven tank process for de-greasing, de-rusting & Phosphated, panel having front and rear opening and provision for installation of separate cable alleys, all MCCBs must be have thermal magnetic relrase, busbar chamber and switchgear compartments, provision in cable alleys for bottom cable entry for incoming & outgoing cables, fixing danger notice plate, with and including erection, testing and commissioning, complete all as specified and directed including the following fixtures and fitments:-

(A) BUS BAR: TPN aluminium bus bar chamber E91 grade of 400Amp rating with heat shrinkable sleeves colour coated fixed on moulded brackets and covered all around by insulating / CRCA sheet having no exposed porton. (B) Incoming: (a) MCCB 200Amp, 4Pole, 36kA with adjustable electronic release & extendable rotary handle (with release range 200-400Amp) - 02 Nos (b) CTs 200/5 with selector switch-03 Nos (c) Digital type Ampere meter 0-200A with selector switch -01 (d) Digitial Ammeter 0-200A with selector switch - 1 Nos (e) Digitial Voltmeter 0-200volt with selector switch - 1 Nos (f) Phase Indicating Lamps -03Nos (g) Control fuses /MCB SP 32Amp - 03 Nos (B) Outgoing: (a) MCCB 125Amps, 4Pole, 16kA with extendable rotary handle - 02 Nos (b) MCCB 100Amps, 4Pole, 16kA with extendable rotary handle - 04Nos

All as per Serial Item No. 38 here-in-before but for following fittings & fixtures, complete all as specified: (A) BUS BAR: TPN aluminium bus bar chamber E91 grade of 350Amp rating with heat shrinkable sleeves colour coated fixed on moulded brackets and covered all around by insulating / CRCA sheet having no exposed porton. (B) Incoming: (a) MCCB 160Amp, 4Pole, 25kA with adjustable electronic release & extendable rotary handle (with release range 125-200Amp) - 01No (b) CTs 160/5 with selector switch -03 Nos (c) Digitial Ammeter 0-200Amp with selector switch - 1 Nos (d) Digitial Voltmeter 0-200Volt with selector switch - 1 Nos (e) Phase Indicating Lamps -03Nos (f) Control fuses /MCB SP 32Amp -03 Nos (B) Outgoing: (a) MCCB 125Amp, 4Pole, 16kA with extendable rotary handle - 02 Nos (b) MCCB 100Amps, 4Pole, 16kA with extendable rotary handle - 03Nos

All as per Serial Item No. 38 here-in-before but for following fittings & fixtures, complete all as specified: (A) BUS BAR: TPN aluminium bus bar chamber E91 grade of 200Amp rating with heat shrinkable sleeves colour coated fixed on moulded brackets and covered all around by insulating / CRCA sheet having no exposed porton. (B) Incoming: (a) MCCB 125Amp, 4Pole, 16kA with adjustable electronic release & extendable rotary handle (with release range 63-125Amp) - 01No (b) CTs 100/5 with selector switch -03 Nos (c) Digitial Ammeter 0-200Amp with selector switch - 1 Nos (d) Digitial Voltmeter 0-200Volt with selector switch - 1 Nos (e) Phase Indicating Lamps -03Nos (f) Control fuses /MCB SP 32Amp -03 Nos (g) Digitial Ampere meter 0-100Amp with selector switch - 1 No (B) Outgoing: (a) MCCB 100Amp, 4Pole, 16kA with extendable rotary handle - 01No (b) MCCB 63Amp, 4Pole, 16kA with extendable rotary handle - 02Nos (c) MCCB 32Amp, 4Pole, 16kA with contactor 32Amp - 01No Set (d) Timer & Protection MCB (f) Manual auto control switch, duly windup to terminal block for connecting street light circuits.

All as per Serial Item No. 38 here-in-before but for following fittings & fixtures, complete all as specified: (A) BUS BAR: TPN aluminium bus bar chamber E91 grade of 500Amp rating with heat shrinkable sleeves colour coated fixed on moulded brackets and covered all around by insulating / CRCA sheet having no exposed porton. (B) Incoming: (a) MCCB 250Amp, 4Pole, 25kA with adjustable electronic release & extendable rotary handle (with release range 300-400Amp) - 01No (b) CTs 250/5 with selector switch -03 Nos (c) Digitial Ammeter 0-250Amp with selector switch - 1 Nos (d) Digitial Voltmeter 0-500Volt with selector switch - 1 Nos (e) Phase Indicating Lamps -03Nos (f) Control fuses /MCB SP 32Amp -03 Nos (B) Outgoing: (a) MCCB 125Amp, 4Pole, 16kA with extendable rotary handle - 01No (b) MCCB 100Amps, 4Pole, 16kA with extendable rotary handle - 04Nos

All as per Serial Item No. 38 here-in-before but for following fittings & fixtures, complete all as specified: (A) BUS BAR: TPN aluminium bus bar chamber E91 grade of 400Amp rating with heat shrinkable sleeves colour coated fixed on moulded brackets and covered all around by insulating / CRCA sheet having no exposed porton. (B) Incoming: (a) MCCB 250Amp, 4Pole, 25kA with adjustable electronic release & extendable rotary handle (with release range 160-250Amp) - 02Nos (b) CTs 250/5 with selector switch -03 Nos (c) Digitial Ammeter 0-250Amp with selector switch - 1 Nos (d) Digitial Voltmeter 0-500Volt with selector switch - 1 Nos (e) Phase Indicating Lamps -03Nos (f) Control fuses /MCB SP 32Amp -03 Nos (B) Outgoing: (a) MCCB 125Amp, 4Pole, 16kA with extendable rotary handle - 01 Nos (b) MCCB 100Amps, 4Pole, 16kA with extendable rotary handle - 06Nos

M&L for Repair & Servicing of existing LT Panel board indoor / outdoor type of any capacity, by Cleaning incomer switches, bus bar & out going switches etc., thoroughly by using blower, replacement of rusted bolts & nuts, screws, thimble, control wiring with new material of size as per existing, making the locking arrangement functional including welding if required on frame, hinges, doors, denting etc., making proper connections for out going / incoming cable by providing suitable thimble as required at site and re-fixing all fixtures & fittings after servicing and testing, complete all as specified and as directed. Note: Necessary major items such as MCCB's, Indictor lamps, Volt meter, Amps meter, Voltage Selector Switch / Ampere Selector Switch etc., if required to be replaced shall be measured and paid separately as 'Supply only' against respective item of this Schedule..

Supply only MCCB 4 Pole, 415Volt, Adjustable type, 400Amps with breaking capacity 36 kA, complete all as specified and as directed.

Supply only MCCB 4 Pole, 415Volt, Adjustable type, 200Amps with breaking capacity 36 kA, complete all as specified and as directed.

Supply only MCCB 4 Pole, 415Volt, Adjustable type, 200Amps with breaking capacity 36 kA, complete all as specified and as directed.

Supply only MCCB 4Pole, 415Volt, Adjustable type, 160Amps with breaking capacity 36 kA, complete all as specified and as directed.

Supply only MCCB 3 Pole, 415Volt, Adjustable type, 100-125Amps with breaking capacity 16 kA, complete all as specified and as directed.

Supply only LED Ammeter with selector switch - 1 No, Aux supply 80-300 VAC, 3 phase, complete all as specified.

Supply only LED Voltmeter with selector switch - 1 No, Aux supply 80-300 VAC, 3 phase, complete all as specified.

Supply only spreader link kit suitable for cable size upto 70Sqmm, complete all as specified.

Supply only spreader link kit suitable for cable size upto 95 to 150Sqmm, complete all as specified.

Supply only spreader link kit suitable for cable size upto 185 to 400Sqmm, complete all as specified.

Supply only LED Phase Indicator lamp (RED, Yellow, Blue), complete all as specified.

Supply only Bus bar sleeves of size 20mm - 360mm, complete all as specified.

Supply only Multifunction Meter with showing V, A, F, PF, kW, kVA, kVAR, kWh, Kvah, kVARh, Runhour, one hours phase angle, Inturrupts, THD, Evens (high-Low), Neutral cutterny, accurancy, etc., complete all as specified.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, confirming to Fe410-W (Gde Fe-250 Quality A), complete all as specified and as directed.

M&L for Spray painting including preparation of old surfaces of steel or steel based surfaces of LT panel boards / Feeder pillar box and the like with synthetic enamel paint by spray gun air compressor, with and including cleaning old surfaces, complete all as specified and as directed. Note: Contractor shall provide necessary safety arrangements for Painter / Electrician / Helper / Supervisor / Engineer etc., working on LT system at his own risk.

S&F IN REPAIR Glow sign board / Flex board box type of size 6'x4'x7" made out of 26 gauge GI sheet and front with flex board of suitable thickness duly printing letters as required at site as directed, with and including mounting with 25mm square pipe with necessary nuts & bolts to GI frame, applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces, with and including 06 Nos LED 20Watt tube light fitting with tube, connecting with suitable cable to electric source, including taking down existing glow sign board of any description, complete all as specified and as directed.