Military Engineer Services Tender

M&L for rolled/hollow tube mild steel of any type/size/ sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors and door frames; fixed with angle cleats or other connecting plates etc of Fe 290 (Gde E-165) including dismantling of wrought iron or mild steel work of any description complete all as specified and directed.

M&L for rolled/hollow tube mild steel of any type/size/ sections as in roof trusses (framed) of Fe 290 (Gde E-165) including dismantling of wrought iron or mild steel work of any description complete all as specified and directed.

M&L for compound girders and stanchions, steel columns, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, hollow sections, including all lattice bars, stiffeners, gusset plates, etc. confirming to Fe 290 (Gde E-165) including dismantling of wrought iron or mild steel work of any description complete all as specified and directed.

M&L for PCC 1:2:4, type B-1 (using 20mm graded crushed stone aggregates) as in coping, channel, benching of manhole, bed plates or similar works including necessary form work and demolition of existing plain cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

S&F 0.8mm thick galvanised mild steel, plain sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required including dismantling of existing mild steel plain sheet complete all as specified and directed..

S&F framed work such as in fancy gates, sliding gates, including their moving tracks made with hollow tubes, angle, flats, "C" channels, Tee, plain mild steel bar, etc., or of similar type of work conforming to Fe.290 (Gde E-165) including dismantling complete all as specified and directed.

S&F purpose made butt hinges, steel roller, rigid castor with bracket, sliding door bolts, tower bolts, fancy spikes or similar type of work fixed with welding conforming to Fe-290 (Gde E-165) suitable for stone/concrete door, steel gates and window frames complete all as specified and directed.

M&L for applying evenly a tack coat of industrial bitumen of grade 85/25 @ 1.2 kg per Sqm without leaving the pores/voids in the surface including cleaning the surfaces over primed or APP membrane surface complete all as specified and directed.

M&L for applying bitumen based primer for use in waterproofing and damp-proofing treatments applied @ 0.30 liter per Sqm in two coats over concrete/plastered surface including cleaning the surface complete all as specified and directed.

M&L for providing and laying APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gms/sqm) forced application with the fire torch complete all as specified and directed.

M&L for preparation of bituminuous surface of any description and applying two coats of Aluminium paint complete all as specified and directed.

M&L for 12mm thick in CM 1:4, cement mortar plaster over old/new RCC/PCC surfaces of wall and floor using 1% by weight of cement, liquid integral water proofing compound finished even and smooth without using extra cement including the following provisions:- (a) After curing and drying of surface, apply solution of one coat, grey cement mixed with chemical Tapecrete P-151(Make CICO)/Pidicrete URP (Make Dr Fixit)/or equivalent product of Fosroc mixed in 1:2 (one part chemical two parts of grey cement) proportion, apply with painting brush/roller to seal the pores in wall, slab and floor. (b) After drying providing and laying of fiber mesh cloth over entire area and apply solution in two coats, white cement mixed with chemical Tapecrete P-151(Make CICO)/Pidicrete URP (Make Dr Fixit)/or equivalent product of Fosroc , mixed in 1:2 (one part chemical two parts of white cement) proportion including preparation of surface, cleaning as per manufacturer’s instructions complete all as specified and directed. Note: Fiber Mesh shall be paid under supply only item.

M&L for rendering 10mm thick cement mortar 1:3 over concrete roof or wall surface of any description finished even & smooth without using extra cement including mixing of water proofing compound and fiber mesh cloth as required over surface as per manufacture's instructions complete all as specified & directed. Note: Water proofing compound and fiber mesh cloth will be paid seperately

Supply only water proofing compound complete all as specified and directed.

Supply only fiber mesh cloth to cover cracked area over wall/roof surfaces fixed with chemical or as per manufacturer's instrcuctions complete all as specified and directed.

Taking down existing rolling shutter from existing opening of any description and material complete including making good to match the existing surfaces complete all as specififed and directed

S&F steel rolling shutters, 1.25mm laths thickness of approved laths design/pattern (as per IS-6248:1979 or latest revision), with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer over it, erected in position as indicated, complete all as specified and directed.

S&F steel rolling shutters, 1.25mm laths thickness of approved laths design/pattern gear operated type with bevel gear box and crank handle, (as per IS-6248:1979 or latest revision), with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer over it, erected in position as indicated complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint duly filled the voids with enamel based putty over one coat of red oxide Zinc chromate primer complete all as specified and directed.

M&L for 60mm thick factory made chamfered edge cement concrete paver block, rubber moulded of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drives ways or light traffic parking etc., of required strength thickness and size/shape, made by table vibratory method using laid over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of interlocking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including dismantalling of existing paver block complete all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregates) 75mm thick as in sub base to floor or similar items including dismantalling of existing PCC complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with necessary clamps including dismantalling of existing pipe complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor including dismantalling of existing pipe complete all as specified and directed.

S&F PVC (SWR) bends with access door for 110 mm bore pipe complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal with access door for 110mm bore pipe complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) three layered wall construction, hoisted and fixed in position including one ball valve high pressure of PTMT coated aluminium rod and high density plastic ball screwed for iron pipe 25 mm dia including taking down existing water tanks complete all as specified and directed.

Supplying and laying of 25mm nominal size CPVC pipes SDR 11 including plain & brass threaded special fittings of same size or of reducer or enlarged size, fixed to wall/ceiling or laying in floors and necessary cutting/chases in wall/floor of concealed nature and their making good including taking down complete all as specified and directed.

S&F in repairs 25mm nominal bore bore CPVC, globe or gate valves, connected with pipe with solvent of any material complete all as specified & directed.

M&L for rendering 15mm thick cement mortar 1:4 over brick work or concrete wall surfaces finished even & smooth without using extra cement including taking down plaster complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and directed.