Military Engineer Services Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_699635_1Tender No
8609/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://https://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down chowkhat or frames of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed.
10
-
-
... More
Taking down shutters of any description of area n exc 1sqm each, complete all as specified and as directed.
15
-
-
... More
Taking down shutters of any description of area exc 1sqm but not exc 2sqm each, complete all as specified and as directed.
20
-
-
... More
M&L for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints , complete all as specified and as directed
0.4
-
-
... More
M&L for PCC 1:4:8 type D2 (using 40mm graded Granite stone aggregate) as in foundation, sub base of flooring, filling mass concrete etc., with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.
3
-
-
... More
M&L for PCC type B2 [1:2:4] using 40mm graded granite stone aggregate) as in surface channel, drain and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, including demolition of existing cement concrete of any description, complete all as specified and as directed.
4
-
-
... More
M&L for Forming extra fair finished drain or channel of 30cm inner grith or width in cement concrete using extra cement with and including forming moulds / stopped ends etc., complete all as specified.
65
-
-
... More
M&L for Forming extra fair finished drain or channel of 30cm inner grith or width in cement concrete using extra cement with and including forming moulds / stopped ends etc., complete all as specified.
78
-
-
... More
M&L for PCC 1:3:6 type C2 (using 40mm graded Granite stone aggregate) as in foundation, sub base of flooring, filling mass concrete etc., with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.
2
-
-
... More
M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed.
8
-
-
... More
M&L for Brick work with sub class 'B' bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed.
6
-
-
... More
M&L for 100mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.
73
-
-
... More
M&L for 50mm thick plain cement concrete 1:2:4 type B2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.
73
-
-
... More
M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.
75
-
-
... More
S&F Pre painted galvalume coating GI based corrugated / trapezoidal / tiles profile steel sheet, AZ-70 coating mass, 0.45mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers, with and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed. Note: Measurement shall be taken flat as fixed without any allowance for laps etc.,
96
-
-
... More
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.45mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed.
36
-
-
... More
S&F Aluminum Plain sheet 0.71mm thick of Alloy 31000H4, fixed as in ridge, hip, valley gutter, drip and straight flashing (length & grith as fixed) with and including dismantling plain or corrugated steel sheeting, any gauge, thickness in roof coverings, complete all as specified and as directed.
36
-
-
... More
S&F Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B', with and including dismantling wrought iron or mild steel of any description, complete all as specified and as directed.
959
-
-
... More
S&F IN REPAIR PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./MS with and including taking down existing u/s ceiling boards or wall boards or insulation panels of any description, complete all as specified and as directed.
36
-
-
... More
M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube of top and bottom rails, MS frame shall be covered with heat moulded prelaminated PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheet for top rail ,lock rail and bottom rail, for fully wire gauzed, panel will be of wire gauze in lieu of single side prelam PVC sheet panel, wire gauze shall be wrapped on an additional square 8mm MS Solid tube and this tube shall be welded to MS tubes, wire gauge shall be stretched to tighten firmly, complete all as per specification and drawings, complete all as specified and as directed.
25
-
-
... More
M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube of top and bottom rails, MS frame shall be covered with heat moulded prelaminated PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheet for top rail ,lock rail and bottom rail on either side and as gap insert for top and bottom rail. Pannelling of prelaminated PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings, complete all as specified and as directed.
28
-
-
... More
M&L for solid PVC Door Frame of Size 50mm x 47mm out of 5mm prelaminated PVC sheet on both sides reinforced with M.S Square tube, supplying and fixing in opening as per sepcification and drawing, complete all as specified and as directed.
65
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window Frame/ Chowkhat of size 65mm x 125mm with virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate & natural fibbers (wood powder/ rice husk/ wheat husk) & non toxic additives (maximum toxicity index of 12 for 100 gms) with mitre joints after applying PVC solvent cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, and fixed in position with and including MS hold fast/lugs/SS dash fasteners as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
18
-
-
... More
All as per Serial Item No. 26 here-in-before but for chowkhat size 45mm x 70mm, complete all as specified.
27
-
-
... More
S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension rade), calcium carbonate and natural fibbers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant, complete all as directed by Engineer-in-Charge.
14
-
-
... More
All as per Serial Item No. 28 here-in-before but for 25mm thick door, complete all as specified.
17
-
-
... More
M&L for Factory made 2nd class hard wood Glazed and skeleton shutters , 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and as directed.
18
-
-
... More
M&L for Factory made Flush shutters 30mm thick, with one face covered with decorative face veneer with lipping / frame to match, solid core construction, with block board core and plywood face panels, commercial type, complete all as specified and as directed.
15
-
-
... More
Repairs to loose hanging mild steel window / ventilator shutters of area not exc 1.0SqM upto 3 story height buildings, by repair to hardware by welding / screws, making smooth function of shutters by making necessary repair and making good the disturbed surface, complete all as specified and as directed.
20
-
-
... More
S&F IN REAPIR Helical door spring MS 300mm long ordinary rat tail pattern spring, ISI marked, including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed.
45
-
-
... More
S&F MS butt hinges cold rolled medium weight 100mm size, ISI marked, complete all as specified and as directed.
120
-
-
... More
S&F IN REPAIR Aluminium anodised barrel tower bolt of extruded section of size 200mm long complete, complete all as specified and as directed.
76
-
-
... More
S&F IN REPAIR Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specified and as directed.
80
-
-
... More
S&F IN REPAIR 150mm long extruded section aluminium alloy anodised handles fabricated type, complete all as specified and as directed.
68
-
-
... More
S&F IN REPAIR Continuous piano mild steel hinge of 40mm width of flaps, bright finish or electro galvanised, complete all as specified.
46
-
-
... More
S&F IN REPAIR Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed.
65
-
-
... More
M&L for Floor door stopper of Aluminium alloy body & tongue, anodised with 150mm long and hard drawn steel spring, fixed in door, complete all as specified and as directed.
120
-
-
... More
S&F IN REPAIR SS curtain rod 20mm bore dia with brackets, fixing stops, roller bracket, wooden nobs etc., with Harrison rails, complete all as specified.
165
-
-
... More
M&L for 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane, complete all as specified and as directed.
24
-
-
... More
M&L for 5mm thick sheet glass ordinary quality and glazing with oil putty in squares exc 0.5 Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed.
28
-
-
... More
S&F Powder coated aluminium window / ventilator shutters, fixed type without sash bars, with aluminium sections weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing and powder coated aluminium snap beading screws (thickness of powder coating not less than 50 micron), complete all as specified and as directed. Note:- aluminium shutter shall be measured in sqm. All the aluminium fittings/fixtures such as butt hinges, tower bolts, handles etc, sheet glass shall be measured and paid separately under relevant items.
6
-
-
... More
S&F Factory made powder coated aluminium sliding type window (Triple Track type), fabricated to required size with standard aluminium sections with bottom track of size 92x31.75x1.6mm, side & top frame 92x31.75x1.4mm, top & bottom shutter rail with 39x17x1.4mm, outer style of size 39x17x1.4mm, interlock style of size 39x27x1.4mm of approved make according to IS (thickness of powder coating not less than 50 micron) including necessary glazing clips, with and including 4mm thick sheet frosted glass for two shutters fixed with rubber gasket and SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for wire mesh shutter fixed with aluminium beading, anodised aluminium fitting/fixture such as required number of rollers of suitable size, interlocking cleats/plates etc as required, complete all as specified and directed by the Engineer-in-Charge. Note : Quoted rate shall be inclusive of frame, shutter, sheet frosted glass, SS wire mesh and hardware such as butt hinges, tower bolts, handles, locking arrangement etc, complete as required at site.
45
-
-
... More
S&F IN REPAIR Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed
46
-
-
... More
M&L for Light Shade Coloured Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed.
52
-
-
... More
M&L for Light Shade Coloured Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in skirting etc., laid over and including 10mm thick backing layer in CM (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing tiles of any type with bedding mortar, complete all as specified and directed.
6
-
-
... More
M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.11 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed.
47
-
-
... More
M&L for Premium quality, joint free ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exc 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified.
46
-
-
... More
M&L for Machine cut Granite stone slab, 20mm thick, premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over 15mm thick screed bed in cement mortar 1:4 including rubbing and polishing and dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and as directed.
28
-
-
... More
M&L for Machine cut Granite stone slab, 20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including bull nosing the edges, rubbing and polishing complete and 10mm thick backing coat in CM 1:4 including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding and removing rubbish off the premises, complete all as specified and as directed.
12
-
-
... More
M&L for Rendering 10mm thick on fair faces of new brick work or concrete surfaces of walls in CM 1:4 finished even and fair without using extra cement, complete all as specified and as directed.
68
-
-
... More
M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in two layers as 10mm thick in cement mortar 1:6 followed by 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions and finish the surface even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. Note: Supply of WPC will be measured and paid separately.
96
-
-
... More
Supply only Integral Water Proofing Compound. Make: Pidilite Industries Ltd Taloja / FOSROC / Dr Fixit / Asian paints
10
-
-
... More
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.
85
-
-
... More
M&L for Rendering 5mm thick in CM 1:3 as in ceiling surfaces, finished even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.
68
-
-
... More
M&L for Washed stone grit plaster on exterior stone walls in two layers as 12mm thick in cement mortar 1:4, furrowing the under layer with scratching tool, applying cement slurry on the under layer @3kg/Sqm , followed by top layer 15mm thick in cement mortar 1:1/2:2 (1cement: 1/2 Sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern, including scrubbing and washing with brushes & water to expose the stone chippings, with and including taking down existing cement plaster of any description, complete all as specified and as directed. Note: Supply of WPC will be measured and paid separately.
78
-
-
... More
M&L for applying two or more coats of French polishing over one coat of wooden primer, with and including complete removal of existing treatment on old wooden surfaces of any description over 10 cm width or girth, previously treated with synthetic enamel paint, complete all as specified and directed.
480
-
-
... More
M&L for Complete removal of existing treatment on old walls & RCC surface to remove dust, loose particles etc., with compressed air or any other suitable technique, grinding any sharp edges and applying two coats of waterproof coating Nitocote or equivalent wall guard, UV resistant, breathable & flexible having minimum 100% elongation when applied an acrylic water based elastomeric & decorative coating @ 110micron thick dry film in two coats as per manufacturers instructions, complete all as specified and as directed.
230
-
-
... More
M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of new plastered surfaces of any description, all as per manufacturer's instructions, complete all as specified and as directed.
96
-
-
... More
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1mm thick wall case putty, complete all as specified and as directed.
85
-
-
... More
M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and as directed.
68
-
-
... More
M&L for Preparing old steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
680
-
-
... More
M&L for Preparing old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
146
-
-
... More
M&L for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
76
-
-
... More
M&L for applying one coat of oil emulsion distemper (white / Tinted) with and including preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling holes, cracks with cement base putty, complete all as specified and as directed.
2850
-
-
... More
M&L for applying two coat of oil emulsion distemper (white/Tinted) with and including preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots ,filling holes, cracks with cement base putty, complete all as specified and as directed.
6580
-
-
... More
M&L for Complete removal of existing treatment on old walls & cleaning with high pressure water jet pump and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, with and including preparation of old decorated surfaces of wall, complete all as specified and as directed.
5230
-
-
... More
S&F 20mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings, fixed to walls/ceilings/ laid in floors, cutting chases as required at site and making good with CM 1:3, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.
121
-
-
... More
S&F 25mm outer dia, 3-layer PP-R Polypropylene random copolymer) concealed pipe SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings, fixed to walls/ceilings/ laid in floors, cutting chases as required at site and making good with CM 1:3, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.
581
-
-
... More
S&F IN REPAIR 3-layer PP-R Polypropylene random copolymer) PP-R Gate valve (Brass insert) suitable for 25mm bore dia pipe, completeall as specified and as directed.
20
-
-
... More
S&F IN REPAIR 150mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.
111
-
-
... More
S&F IN REPAIR 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.
133
-
-
... More
S&F IN REPAIR 75mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.
85
-
-
... More
S&F IN REPAIR uPVC (SWR) bend any radius with access door, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed.
43
-
-
... More
S&F IN REPAIR uPVC (SWR) bend any radius with access door, suitable for 75mm bore pipes, including jointing with solvent, complete all as specified and as directed.
20
-
-
... More
S&F IN REPAIR uPVC (SWR) junction, suitable for 110mm bore pipes, (single T), equal or unequal with oval access door, including jointing with solvent, complete all as specified and as directed.
25
-
-
... More
S&F IN REPAIR uPVC (SWR) Floor / Nahani trap with grating of 75mm dia outlet, setting and jointing with solvent, complete all as specified and as directed.
45
-
-
... More
S&F IN REPAIR uPVC (SWR) gully trap 125/100mm, setting and jointing with solvent, complete all as specified and as directed.
20
-
-
... More
S&F IN REPAIR Chromium plated health faucet with angular stop cock and stainless steel pipe 1.25m length with SS wall hook, screwed for iron pipe of 15mm bore, complete all as specified and as directed.
115
-
-
... More
S&F IN REPAIR Bib tap, 2 Way Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed. Make: Cat No. CON-041KN of Jaquar or Equivalent in Makes specified here in after.
40
-
-
... More
S&F IN REPAIR Bib tap, 3 Way mixer Bib tap for mixing Hot & Cold water, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
35
-
-
... More
S&F IN REPAIR Tubular Towel rail 20mm dia, 600mm long, D type, Brass chromium plated, fixed with CP brass screws, wooden / plastic cleats, completed all as specified.
35
-
-
... More
S&F IN REPAIR Vitreous china Wash down water closet pan EWC (Pedestal pattern), white with 'P'or 'S' trap étc, (excluding flushing cistern and flush pipe) including plastic water closet seat cover closed pattern with flat bottom cover, mild steel chromium plated or aluminised hinging device, fixing bolts, etc, complete all as specified and as directed.
12
-
-
... More
S&F IN REPAIR 600mm x 450mm bevelled edge mirror 6mm thick of selected quality glass mounted on 6mm thick commercial plywood/ AC building board and fixed to wooden plugs with CP brass screws and cup washers and provision of wooden beading around the mirror complete all as specified and as directed by Engineer - in - Charge.
45
-
-
... More
S&F IN REPAIR Bib tap, PTMT of any colour, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
150
-
-
... More
S&F IN REPAIR Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
120
-
-
... More
S&F IN REPAIR 15mm bore chromium plated pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.
60
-
-
... More
S&F IN REPAIR Brass shower rose of 15mm inlet and 100mm outlet, chromium plated with swivel joint, CP shower arm and CP flange of approved make and quality, fixed to 15mm bore dia pipe, complete all as specified and as directed.
30
-
-
... More
S&F IN REPAIR PVC valveless, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe etc complete fixed with CP brass screws complete all as specified and as directed.
115
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%