Military Engineer Services Tender

M&L for sand cushioning in trenches for bricks of u/g cable with coarse sand laid dry in trenches with uniform thickness complete all as specified and as directed by Engr-In-Charge.

Supply and lay burnt bricks of sub class 'B' laid dry across in trenches for cable protection all as specified and directed complete all as specified and as directed by Engr-In-Charge.

Material & Labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc. complete all as specified and as directed by Engr-In-Charge.

Material & Labour for PCC 1:3:6 type D2 (using 20mm graded stone aggregate) as in foundation, mass concrete for road crossing etc.,complete all as specified and as directed by Engr-In-Charge.

Material & Labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation, mass concrete for road crossing etc. complete all as specified and as directed by Engr-In-Charge.

M&L for Breaking road, pavement, hard standing, including excavation of subbase, soil upto the depth of 0.60 mtr and width 0.45 mtr by mechanical means for laying of UG cable including making good to the disturbed surfaces matching with existing after laying of cable including removal of surplus material to nearby dumping point complete all as specified and directed by Engr-In-Charge. Note:(i) Any T&P required for work is deemed to be included in quoted rates. (ii) Tiles, cement concrete etc. required for making good is deemed to be included in quoted rates.

Supply and lay pipe galvanized light grade including fittings 40mm dia for cable protection using road crossing/ PCC hard surface/ style etc complete all as specified and as directed by Engr-In-Charge.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm x 3.5 core including taking down old U/S cable of any size complete all as specified and as directed by Engr-In-Charge.

All as per Item No-11 but of size 16 Sqmm x 4 Core complete all as specified and as directed by Engr-In-Charge.

All as per Item No-11 but of size 10 Sqmm x 4 Core complete all as specified and as directed by Engr-In-Charge.

M&L sub main wiring surface type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 1.5 Sqmm, 1100 volts grade (FRLS) and one run of 1.5 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through concealed/ casing caping/ PVC conduit as required complete all as specified and as directed by Engr-In-Charge. (Note :- Two runs of 1.5 Sqmm cable, one run of 1.5 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).

S&F MCB, SPN DB single door type, made out of CRCA mild steel sheet flushed in wall, SPN 4 way 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down/dismantling of Old DB of any size any type from Site complete all as specified and as directed

S&F MCB, SPN DB single door type, made out of CRCA mild steel sheet flushed in wall, SPN 2 way 240 volts IP-43, with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc including taking down/dismantling of Old DB of any size any type from Site complete all as specified and as directed

Supply and fixing in repairs MCB TPN 40 Amps, 415 Volts complete all as specified and as directed by Engr-In-Charge.

Supply and fixing in repairs MCB SP 40 Amps, 415 Volts complete all as specified and as directed by Engr-In-Charge.

Supply and fixing in repairs MCB SPN 40 Amps, 415 Volts complete all as specified and as directed by Engr-In-Charge.

Supply and errect swaged steel tubular poles, 9 meter long complete with cast iron base plate, finial taper plug, bolts, nuts, screws and complete with all accessories etc including Taking down/dismantling of Old damaged PCC/Steel Pole from Site complete all as specified and as directed by Engr-In-Charge.

M&L for GI bracket for street light fittings 32mm dia 1.2Mtr length including D/C clamps for PCC/Steel pole round or square nut bolt and washers etc and painiting of bracket and clamps including taking down of old GI bracket Complete all as specifiedf and directed by Engr in Charge

Supply and fixing in repairs LED street light fitting to be mounted on pole/bracket of minimum 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, corrosion resistant including optics for scattering light complete all as specified and directed by Engr-In-Charge.

S & F in repairs post top lantern LED 15W made up of pressure die cast aluminium housing and LEDs as a light source prewired with electronic driver suitable for 15 watts light fitting with IP 65 protection with Surge protection device for protection of LED driver, lumen efficacy of light fitting shall be not less than 100 lm/W. with necessary mounting arrangements including taking down old unserviceable light fitting.complete all as specified and directed by Engr-in-charge.

S & F Junction Box for Street Lights of size minimum 205x255x112 mm made out of Polycarbonate material totally enclosed, dust and vermin proof, rain protected , door pasted with rubber gasket, water tight IP 65 protection with teriminal box for three phase 4 wire system of rating 06 Amps suitable to terminate LT Cable of size upto 25 sqmm.with option to mount including one no MCB SP 06 amps including cable glands at both incoming and outgoing side mounted on security light pole with suitable bracket nuts, bolts including removal of exiting unsv all as specified and directed. Junction Box.

Supply and fixing in replacement LT Panel board outdoor type fabricated out of 3.00mm thick CRCA Sheet steel factory made vermin proof duly painted with two coat of synthetic enamelled paint over a coat of red oxide primer or powder coated, double door, water proof dust and vermin proof hinged and lockable doors inlcuding rain protection cover on top and complete with interconnections, with copper wires, tapes, opening from both sides with cable entry from bottom, with cable alley and bus bar chamber, bonding to earth and painting, including angle iron frame of size minimum 40x40x6mm having 4 legs 0.60 mtr long including grouting in PCC 1:4:8, to the reqd depth, including under mentioned Items all as specified and directed by Engineer-in-Charge. INCOMING (a)   MCCB 100 amps 4 pole 25 KA adjustable thermal and fixed magnetic setting - 01 No Busbar : - Aluminium busbar 3 phase 4 wire of 250 Amps supported with ebonite insulators -1set OUTGOING (b)  MCCB 63 Amps 4 pole 25 KA with adjustable thermal and fixed magnetic setting – 03 Nos (c) Multifuction meter suitable to display voltage, current, frequency, power factor and other relavent parameters for three phase 4 wire 415 Volts System including three nos CTs of appropriate ratio – 01 No (d) LED indicator RYB – 03 Nos

Supply and fixing in replacement LT Panel board outdoor type fabricated out of 3.00mm thick CRCA Sheet steel factory made vermin proof duly painted with two coat of synthetic enamelled paint over a coat of red oxide primer or powder coated, double door, water proof dust and vermin proof hinged and lockable doors inlcuding rain protection cover on top and complete with interconnections, with copper wires, tapes, opening from both sides with cable entry from bottom, with cable alley and bus bar chamber, bonding to earth and painting, including angle iron frame of size minimum 40x40x6mm having 4 legs 0.60 mtr long including grouting in PCC 1:4:8, to the reqd depth, including under mentioned Items all as specified and directed by Engineer-in-Charge. INCOMING (a)   MCCB 63 Amps 4 pole 25 KA adjustable thermal and fixed magnetic setting - 01 No Busbar : - Aluminium busbar 3 phase 4 wire of 200 Amps supported with ebonite insulators -1set OUTGOING (b)  MCB 32 Amps 4 pole 25 KA with adjustable thermal and fixed magnetic setting – 03 Nos (c) Multifuction meter suitable to display voltage, current, frequency, power factor and other relavent parameters for three phase 4 wire 415 Volts System including three nos CTs of appropriate ratio – 01 No (d) LED indicator RYB – 03 Nos (e) Timer circuit prewired sutaible for upto 3 phase 5 KW load - 01 Nos

S&F PVC Conduit pipe from PVC Junction Box to street light bracket for protection of cable fixing clamp on poles drilled the hole and fixing with screwed suitable size nut bolt with clamp including taking down old damaged PVC conduit pipe of any size Complete all as specified and as dirceted by Engr-In-Charge.

S & F PVC insulated multistanderd 3 core, 1.5 sqmm, 1100 volts rated flexible cable including taking down old uncerviceable cable of any type any size complete all as specified and as directed by Engr-In-Charge.

S & F in repairs LED flood light 150W made up of pressure die cast aluminium housing wth toughened glass and LEDs as a light source prewired with electronic driver suitable for 150 watts light fitting with IP 65 protection with Surge protection device for protection of LED driver, lumen efficacy of light fitting shall be not less than 100 lm/W. with necessary mounting arrangements colour as per deside at site including taking down old unserviceable light fitting.complete all as specified and directed by Engr-in-charge.

M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB including dismantling of existing earthing complete all as specified & as directed

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc including dismantling of existing earthing complete all as specified & as directed