Military Engineer Services Tender

Removing excavated surplus soil to a distance exceeding 250m but not exceeding 500m and depositing where directed at a level not exceeding 1.5m above the starting point all as directed.

M&L for sand cushioning with a layer of M sand 23 cm thick under and above the cable complete all as specified and as directed

S&L sub class burnt bricks for cable protection complete as specified as directed

M&L for Plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate for coping incl necessary form work complete all as specified and as directed

M&L for Plain cement concrete 1:4:8, type D2, using 40 mm graded stone aggregate for foundation of poles, stay assembly etc., complete all as specified and as directed

Dismantling the PCC/Steel pole of any type and with street light fitting complete.

Supply and errection Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9 metres long) all as specified and as directed.

S&F Bracket made out of GI tubing medium grade 40 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg/pole complete all as specified and directed.

S&L galvanised iron steel tube, light grade, with all fittings fixed complete on walls, poles, laid under floors or in trenches as cable protection works (including necessary clamps, bolts, nuts, etc.,) as specified for 40 mm bore pipe

S&L galvanised iron steel tube, light grade, with all fittings fixed complete on walls, poles, laid under floors or in trenches as cable protection works (including necessary clamps, bolts, nuts, etc.,) as specified for 80 mm bore pipe

Dismantling cross arms of MS channel or angle sections etc. complete

Dismantling insulators any type and size

Dismantling of stay assembly complete, (Demolition of concrete, etc and excavation measured separately).

Dismantling of ACSR conductors incl service connection any type and any size.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 300 Sqmm, 3.5 core laid in trenches/wall.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 240 Sqmm, 3.5 core laid in trenches/wall.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 400 Sqmm, 3.5 core laid in trenches/wall.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 185 Sqmm, 3.5 core laid in trenches/wall.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 95 Sqmm, 3.5 core laid in trenches/wall.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 70 Sqmm, 3.5 core laid in trenches/wall.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 50 Sqmm, 3.5 core laid in trenches/wall.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 35 Sqmm, 3.5 core laid in trenches/wall.

S&L XLPE insulated, screened, PVC bedded, galvanised steen strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 25 Sqmm, 4 core laid in trenches/wall..

S&L XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 volts grade, cross sectional area 16 Sqmm 4 core laid in trenches. Make : Havells.

S&F LED street light fittings with pressure die cast housing with toughned glass, IP-66 protection etc of 90W LED Street Light Fixtures. Make : Bajaj Model No (BRTFG 90W LED I V2) or equivalent incl dismantling of old u/s light fitting.

S&F LED street light fittings with pressure die cast housing with toughned glass, IP-66 protection etc of 72 W LED Street Light Fixtures. Make : Bajaj Model No BRTFG 72W LED v3) or equivalant incl dismantling of old U/S light fitting.

Horizontal trenchless bore drilling using mechanical pneumatic drilling using mechanical pneumatic drilling equipment for passing and including cost of HDPE pipe of 80 mm dia suitable for 0.4 mpa working pressure hard standing, depth ramgel not less than 0.75m and up to 1.0 m and making good to disturbed surface of road all as specified and as directed. Note: unit rate deemed to be incl cost of deposit and taking permission from civil authorities.

S&F 2 runs of PVC insulated 2.5 sqmm single core multistranded copper conductor cable and one run of 2.5 sqmm copper wire as earth continuity conductor drawn through and incl rigid non metalic conduit 20 mm external dia fixed on poles with suitable sizes of clamps & connecting up all as specified and as directed. Note: Two runs of cable and one run of earth wire and one run of conduit shall be measured as one length.

S&F of FRP cable looping boxes of size 240mm x 130mm x 110mm with PVC sheet finish inside including MCB SP 1 No 6 Amps, heavy duty PVC connector 4 way Terminal strip 01 No & fixed to pole with suitable size clamp with nuts,bolts complete all as directed. Make Sintex.

M&L for Busbar chambers floor mounten mounted of copper busbar with factory made sheet metal enclosure box outdoor type of suitable size for 6 way, 4 pole, 50 Hz, 415V of capacity 250 A including leg made of angal iron 40x40x6 mm and PCC work complete all as specified and directed

Supply, install,testing & Commisioning of LT feeder pillar box/panel board/out door type, made out of MS sheet 3.15 mm thick duly powder coated, dust and vermin proof and angle iron frame of size 40x40x6 mm mounted on angle iron bracket (40x40x6mm) ie, 15cm below groung level and 15cm above ground level with suitable foundation/ platform for mounting the panel, 3 phase, 4 wire, 440 Volts, AC, 50 HZ with TPN aluminium bus bar of capacity 400 A with PVC insulated heat shrink colour code sleeves, mounted horizontaly with porcelain insulators, sufficient air vent provision for all the three sides, stickers / plastic plates for switch gear details complete with voltmeter 0-500 volts Ammeter 0-50Amps with CTS & selector switches, back to fuse, indicating lamps with toggle switches duly wired including, CBET locking arrngement and comprising of the following items:-(Para Record). (a) Incomming MCCB 200 Amps, 4 pole, 50 KA- 01 No Make Legrand/Schenider /L&T (b) MCCB TP100 Amps - 01 Nos. Make: Legrand/Schneider/L&T (c) MCCB TP 32Amps - 04 Nos. Make: Legrand/Schneider/L&T (d) MCB TP 16 Amps - 01 Nos. Make: Legrand/Schneider/L&T (e) Multifunction meter with selector switch for measuring voltage, amps -01 Set (f) Indicator lamp LED type (RYB) (03 Nos) set-01

Supply, install,testing & Commisioning of LT feeder pillar box/panel board/out door type, made out of MS sheet 3.15 mm thick duly powder coated, dust and vermin proof and angle iron frame of size 40x40x6 mm mounted on angle iron bracket (40x40x6mm) ie, 15cm below groung level and 15cm above ground level with suitable foundation/ platform for mounting the panel, 3 phase, 4 wire, 440 Volts, AC, 50 HZ with TPN aluminium bus bar of capacity 200 A with PVC insulated heat shrink colour code sleeves, mounted horizontaly with porcelain insulators, sufficient air vent provision for all the three sides, stickers / plastic plates for switch gear details complete with voltmeter 0-500 volts Ammeter 0-50Amps with CTS & selector switches, back to fuse, indicating lamps with toggle switches duly wired including, CBET locking arrngement and comprising of the following items:- (a) Incomming MCCB 100 Amps, 4 pole, 25 KA- 01 No Make Legrand/Schenider /L&T. (b) MCCB TP 63 Amps - 01 Nos. Make: Legrand/Schneider/L&T. (c) MCCB TP 32Amps - 01 Nos. Make: Legrand/Schneider/L&T (d) MCB TP 16 Amps - 03 Nos. Make: Legrand/Schneider/L&T (e) Multifunction meter with selector switch for measuring voltage, amps -01 Set. (f) Indicator lamp LED type (RYB) (03 Nos) set-01

Supply, install,testing & Commisioning of LT feeder pillar box/panel board/out door type, made out of MS sheet 3.15 mm thick duly powder coated, dust and vermin proof and angle iron frame of size 40x40x6 mm mounted on angle iron bracket (40x40x6mm) ie, 15cm below groung level and 15cm above ground level with suitable foundation/ platform for mounting the panel, 3 phase, 4 wire, 440 Volts, AC, 50 HZ with TPN aluminium bus bar of capacity 400 A with PVC insulated heat shrink colour code sleeves, mounted horizontaly with porcelain insulators, sufficient air vent provision for all the three sides, stickers / plastic plates for switch gear details complete with voltmeter 0-500 volts Ammeter 0-50Amps with CTS & selector switches, back to fuse, indicating lamps with toggle switches duly wired including, CBET locking arrngement and comprising of the following items:-PARA (a) Incomming MCCB 160 Amps, 4 pole, 35 KA- 01 No Make Legrand/Schenider /L&T (b) MCCB TP 63 Amps - 02 Nos. Make: Legrand/Schneider/L&T (C) MCCB TP 32Amps - 01 Nos. Make: Legrand/Schneider/L&T (d) MCB TP 16 Amps - 03 Nos. Make: Legrand/Schneider/L&T (e) Multifunction meter with selector switch for measuring voltage, amps -01 Set (f) Indicator lamp LED type (RYB) (03 Nos) set-01

Supply, install,testing & Commisioning of LT feeder pillar box/panel board/out door type, made out of MS sheet 3.15 mm thick duly powder coated, dust and vermin proof and angle iron frame of size 40x40x6 mm mounted on angle iron bracket (40x40x6mm) ie, 15cm below groung level and 15cm above ground level with suitable foundation/ platform for mounting the panel, 3 phase, 4 wire, 440 Volts, AC, 50 HZ with TPN aluminium bus bar of capacity 200 A with PVC insulated heat shrink colour code sleeves, mounted horizontaly with porcelain insulators, sufficient air vent provision for all the three sides, stickers / plastic plates for switch gear details complete with voltmeter 0-500 volts Ammeter 0-50Amps with CTS & selector switches, back to fuse, indicating lamps with toggle switches duly wired including, CBET locking arrngement and comprising of the following items:-PARA Contd/-- 38

Contd/-- 37 (a) Incomming MCCB 63 Amps, 4 pole, 25 KA- 01 No Make Legrand/Schenider /L&T (b) MCCB TP 32 Amps - 02 Nos. Make: Legrand/Schneider/L&T (C) MCCB TP 16 Amps - 02 Nos. Make: Legrand/Schneider/L&T (d ) Multifunction meter with selector switch for measuring voltage, amps -01 Set (e) Indicator lamp LED type (RYB) (03 Nos) set-01 Note :- for panel above item no 32, 33, 34 and 35 1. MCCBs are to be of fixed thermal and fixed magnetic setting type, complete all as directed by Engr-In-Charge. 2. Excavation, earth work and PCC work (1:3:6) shall be deemed to be included in the quoted rate. 3. Design and drawing of panel board shall be got approved from GE before procurement /incorporation in the work.

M & L for earthing complete with galavnized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to and incl galavnized iron wire of 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washer etc made of galavnized iron connected to earthing test point through protection pipe light grade of 20 mm dia all as shown in electrical plate No 3 of SSR Part - I 2009 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C 1 chamber, per cost slab 40mm thick in cement concrete (1:2:4) type B 1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe of 20 mm dia medium grade ,wire mesh and lugs, incl test point incl cable connected with suitable size copper lugs complete all as specified and as directed.

M & L for earthing complete with galavnized steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to and incl galavnized iron strip 32x6 mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles, check nuts and washer etc made of galavnized iron connected to earthing test point through protection pipe light grade of 20 mm dia all as shown in electrical plate No 3 of SSR Part - I 2009 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C 1 chamber, per cost slab 40mm thick in cement concrete (1:2:4) type B 1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe of 20 mm dia medium grade ,wire mesh and lugs, incl test point incl cable connected with suitable size copper lugs complete all as specified and as directed.

S&F in replacement of new generation 25 Watt post top energy saving IP-65 enviornmental, friendly long life with symmetrically light distribution, spun aluminium with high power LED. Make :- Havells Cat No. CORALPT25WLED757PSYMTOPC

S&F in replacement of Stellar LED post-top offering combination of sturdy design, execllent illumination and aesthetics in one go. IP 66 and IK 10 rating ensures it stands tall amid varid environemtnal conditionsl, friendly long life with symmetrically light distribution, spun aluminium with high power LED. Make :- Havells NEBULAPT40WLED857PSYMTOPC or its equivalent Phillips / Crompton / Legrand / Schenider / L&T

S&F in replacement of TERRAIN post top lantern is a wether proof indirect lighting solution wich improves horizental uniformity, with reduced glare and improved lighting control saving IP-65 enviornmental, friendly long life with symmetrically light distribution, spun aluminium with high power LED. Make :-Mk -Crompton LPTC-40-CDL or its equivalent Phillips / Havells

S&F Timeline distribution board of 110 Amps 3 pole/230 volts-Digital time switch on pole and wall with a help of suitable size of clamp complete all as specified and directed. Make : Indio Asian of Cat Pt No TL110DB0 or its equivalent.