Military Engineer Services Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 97,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Special Repair To Building No. T 1 4a Pers Cook House And Dining Hall, T 1a Patient Cook House, E 4 Dining Hall At Military Hospital
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_692920_1Tender No
8580/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://https://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including dismantling existing u/s mangalore pattren roof tiles with wooden battens, singles etc., of any description, complete all as specified and as directed.
1265
-
-
... More
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including dismantling existing u/s mangalore pattren ridge roof tiles with wooden battens, singles etc., of any description, complete all as specified and as directed.
25
-
-
... More
M&L for Rolled Mild steel as in roof trusses (Framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections ) including distance pieces, cleats etc., conforming to grade Fe 410-W Gde E - 250 quality 'A', with and including distantling existing steel work of any description, complete all as specified and as directed.
1217
-
-
... More
M&L Framed work such as grills, gratings,etc. with ends of bars, shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladder, framed baluster, walk ways, railings, and similar work confirming to Gde Fe-250 Gde-165,with and including distantling existing steel work of any description, complete all as specified and as directed.
180
-
-
... More
Dismantling existing u/s plain or corrugated roof steel sheeting of any description, in any position, complete all as specified and as directed.
220
-
-
... More
M&L for Rolled Mild steel as in main and cross beams, hip and jack rafters, purlins, etc., fixed with angle cleats or other connecting plates, conforming to grade Fe 410-W Gde E - 250 quality 'A', complete all as specified and as directed.
4771
-
-
... More
S&F Aluminium Composit Pannel board of 3mm thick, fixed over existing wooden / steel frames with and including necessary frame work, screwing & scaffolding, fixed with screws / nails, with and including dismantling existing u/s boarding of any description, complete all as specified.
20
-
-
... More
M&L for Light Shade Coloured Vitrified Ceramic tiles 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed.
165
-
-
... More
M&L for Light Shade Coloured Vitrified Ceramic tiles 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in skirting etc., laid over and including 10mm thick backing layer in CM (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing tiles of any type with bedding mortar, complete all as specified and directed.
15
-
-
... More
M&L for Machine cut Granite Work of any shade of 20mm thick, as in flooring etc., laid over and including 20mm thick backing coat in CM (1:4), set and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite, including grinding & polishing with and including demolition of existing floor of any type with mortar, complete all as specified and directed.
20
-
-
... More
M&L for Machine cut Cudappah stone slab of any shade of 20-25mm thick, as in flooring etc., laid over and including 20mm thick backing coat in CM (1:4), set and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of stone, including rubbing & polishing with and including demolition of existing floor of any type with mortar, complete all as specified and directed.
20
-
-
... More
M&L for False ceiling with High Pressure Steam Cured (HPSC) 4mm thick Non Asbestos Fibre Cement ceiling boards fixed with and including powder coated aluminium snap grid of size 605mmx605mm consisting of 25X25X1.25mm aluminium angles and TEEs of size 35x25x1.25mm with galvanised wire of required length and 6mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying three coats of white wash on ceiling surface, with and including taking down existing u/s ceiling with frame work of any description, complete all as specified and as directed.
120
-
-
... More
M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed.
2
-
-
... More
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.
394
-
-
... More
M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in two layers as 10mm thick in cement mortar 1:6 followed by 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions and finish the surface even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. Note: Supply of WPC will be measured and paid separately.
245
-
-
... More
M&L for Rendering 10mm thick on new fair faces of brick work or PCC block masonry surfaces of walls in CM 1:6 finished even and fair without using extra cement, complete all as specified and as directed.
20
-
-
... More
M&L for Rendering 5mm thick in CM 1:3 as in ceiling surfaces, finished even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.
145
-
-
... More
M&L for preparation of surfaces and applying three coats of white wash on newly plastered surfaces of ceilings, complete as specified and as directed.
145
-
-
... More
M&L for preparation of surfaces and applying three coats of white wash on newly plastered surfaces of walls complete all as specified and as directed.
238
-
-
... More
M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss and efflorescent salts, oils & greasy spots etc., and applying three coats of white wash on walls, complete all as specified and as directed.
726
-
-
... More
M&L for complete removal of existing treatment on old ceiling with wire brush, scrapping down smoke soot, mould, moss and efflorescent salts, oils & greasy spots etc., and applying three coats of white wash on ceiling, complete all as specified and as directed.
635
-
-
... More
M&L for applying two or more coats of cement based wall care putty and preparation for obtaining smooth surface and applying two coats of interior emulsion paint over a coat of primer on walls including preparation of newly plastered surfaces, complete all as specified and as directed.
175
-
-
... More
M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm with and including preparation of old surfaces of any description, all as per manufacturer's instructions, complete all as specified and as directed.
245
-
-
... More
M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss and efflorescent salts, oils & greasy spots etc., and applying two or more coats of cement based wall care putty and preparation for obtaining smooth surface and applying two coats of interior emulsion paint over a coat of primer on walls including preparation of old wall surfaces, complete all as specified and as directed.
400
-
-
... More
M&L for complete removal of existing treatment on old walls with wire brush, scrapping down smoke soot, mould, moss nad efforescent salts, oils & greasy spots etc., and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm with and including preparation of old surfaces of any description, all as per manufacturer's instructions, complete all as specified and as directed.
804
-
-
... More
M&L for Joint free Coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.06 Sq.m. but n. exc. 0.11 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed.
20
-
-
... More
M&L for Joint free Ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exc 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified.
150
-
-
... More
M&L for Machine cut Kota stone slab 18-20mm thick, as in flooring over with and including 20mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match shade of the slab, including cutting, waste, grinding, rubbing and polishing, with and including demolition of existing floor, complete all as specified.
70
-
-
... More
S&F Machine cut kota stone slab 18-20mm thick, as in vertical surfaces such as skirting/dado, laid over and including 15mm thick backing coat in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab, rubbing and polishing, with and including demolition of existing skirting/dado, complete all as specifed and as directed.
10
-
-
... More
M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection laid over and including 75mm thick PCC sub base with 1:4:8 type D2, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, with and including demolition of existing cement concrete of any description, complete all as specified and as directed.
254
-
-
... More
Taking down chowkats or frames n.exc 1.5Sq.m. with shutters (without taking off shutters from the frames) complete all as specified and as directed.
20
-
-
... More
Taking down chowkats or frames exc 1.5 Sq.m. but n.exc 4.0Sq.m. with shutters (without taking off shutters from the frames) complete all as specified and as directed.
3
-
-
... More
S&F 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified.
0.1
-
-
... More
S&F 35mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, size of rail and style as per IS - 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
5
-
-
... More
S&F 35mm thick factory made 2nd class hardwood glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze etc., with sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc., sizes of members of shutters as specified in SSR Part–I, Section 8, clause 8.24(a), complete all as specified.
5
-
-
... More
Taking down and Refixing existing shutters of any description exc 1.0Sq.m. but n.exc 2.0Sq.m, complete all as specified and as directed.
9
-
-
... More
S&F Factory made powder coated aluminium sliding type window (Triple Track type), fabricated to required size with standard aluminium sections with bottom track of size 92x31.75x1.6mm, side & top frame 92x31.75x1.4mm, top & bottom shutter rail with 39x17x1.4mm, outer style of size 39x17x1.4mm, interlock style of size 39x27x1.4mm of approved make according to IS (thickness of powder coating not less than 50 micron) including necessary glazing clips, with and including 05mm sheet glass fixed with rubber gasket, anodised aluminium fitting/fixture such as required number of rollers of suitable size, interlocking cleats/plates etc as required, complete all as specified and directed by the Engineer-in-Charge. Note : Quoted rate shall be inclusive of frame, shutter, sheet glass and hardware such as butt hinges, tower bolts, handles etc, complete as required at site.
20
-
-
... More
S&F 18mm thick decorative pre-laminated particle board, interior grade, pre-laminated on one side with white lamination on other side, as in cupboard shutters etc., fixed with and including 18mmx 6mm thick external teak wood lipping around edges finished with French polish, with and including fixing arrangements, 40mm dia cupboard knobs one for each shutter, magnet catch 02 for each shutter fixed with screws etc., complete all as specified and as directed.
25
-
-
... More
M&L for preparation of new or previously untreated surfaces of wood or wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
25
-
-
... More
M&L for preparation of old surfaces of wood or wood based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
10
-
-
... More
S&F Galvanised mild steel wire cloth, 0.56mm dia of wire and average width of aperture 1.18mm and fixed with galvanised steel wire staples, and including 2nd class hard wood beads straight (any size) for glazed or gauged joinery, renewed including mitrted etc and painting exposed surfaces of beads with two coats of synthetic enamel paint over a coat of pink primer, complete all as specified.
10
-
-
... More
M&L for preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
375
-
-
... More
M&L for preparation of old treated surfaces of steel or steel based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
108
-
-
... More
S&F Mild steel butt hinge, medium weight, cold rolled, 100mm long, ISI marked, complete all as specified.
20
-
-
... More
S&F Mild steel butt hinge, medium weight, cold rolled, 75mm long, ISI marked, complete all as specified.
10
-
-
... More
S&F 25mm dia stainless steel curtain rod including decorative brackets in any length stainless decorative type with two Nos finial (in each rod fixed over window/door) complete all as specified and as directed by the Engineer-in-Charge.
20
-
-
... More
S&F for 100mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
5
-
-
... More
S&F 100mm long aluminium, anodised barrel tower bolts of extruded section, complete all as specified and as directed.
5
-
-
... More
S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section and fixed, complete all as specified and as directed.
5
-
-
... More
M&L for Machine pressed pre-cast concrete interlocking paver blocks any shape and size with glossy finish, confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and pigment, laid over and including 50mm thick sand bed, including demolition of existing floor of any type, complete all as specified and directed by the Engineer-in-Charge.
63
-
-
... More
Supply only Integral Water Proofing Compound. Make: Pidilite Industries Ltd Taloja / FOSROC / Dr Fixit / Asian paints
25
-
-
... More
S&F IN REPAIR Stainless steel sink of overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, made of 1.0mm thick Stainless steel sheet 304 grade for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, with and including PVC waste pipe and coupling, complete all as specified and directed.
2
-
-
... More
M&L for PCC type B0 [1:2:4] using 12.50mm graded granite stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, complete all as specified and as directed.
1
-
-
... More
M&L for water proofing treatment including complete removal of old roof treatment and applying new roof treatment consisting of following:- (a) Top of roof shall be applied 10mm thick plaster with cement mortar (1:3) mixed with WPC @3% by weight of cement. (b) Roof shall be cleaned thoroughly by using wire brush [Mechanical / hand brush] to make it free from any loose particle, dirt / dust, etc.
(c) After cleaned roof surface, the surface shall be painted with one coat of cold applied bituminous primer @ 0.20 Lit per sq. m. (d) Atactic polypropylene polymeric modified prefabricated water proofing membrane five layered reinforced with non woven polyester matt of minimum 3mm thick weight not less than 3 Kg/Sqm shall be laid using butane torch application over entire roof surface with over laps of 100mm in both the directions. (e) Ponding complete all as specified and as directed by Engineer-In -Charge.
(f) Finally roof shall be finished with two coats of bituminous aluminium paint @ 0.10 Kg/Sqm for each coat.
39
-
-
... More
S&F Unplasticised PVC (uPVC) pipe of 15mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.
50
-
-
... More
S&F Unplasticised PVC (uPVC) pipe of 20mm bore of pipe of pressure rating 10 kgf/cm2 with and including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc) and fixed to walls/ceilings/ laid in floors, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.
30
-
-
... More
S&F IN REPAIR Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with bras long body of approved quality, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
3
-
-
... More
S&F IN REPAIR Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
10
-
-
... More
S&F IN REPAIR Stop /Angle Valves, 15 mm bore dia pipe, chromium plated, fancy, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified.
4
-
-
... More
S&F IN REPAIR Vitreous china wash hand basin, white, flat back, size 550x400mm, waste coupling and porcelain stopper including brackets including cutting for and pinning in ends of brackets, 40mm dia CP brass waste fittings, complete all as specified and as directed.
2
-
-
... More
S&F IN REPAIR 15mm bore chromium plated pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.
2
-
-
... More
S&F IN REPAIR Chromium plated 15mm bore stop valves, fancy type, cast copper alloy, with long shank and cup (concealed), screwed down high pressure quarten turn screwed both ends for iron pipe or for unions complete all as specified and as directed by Engineer in charge.
2
-
-
... More
S&F IN REPAIR 600mm x 450mm bevelled edge mirror 6mm thick of selected quality glass mounted on 6mm thick commercial plywood/ AC building board and fixed to wooden plugs with CP brass screws and cup washers and provision of wooden beading around the mirror complete all as specified and as directed by Engineer - in - Charge.
2
-
-
... More
S&F PVC connection (high density) 15mm dia 600mm with PTMT nuts both ends with rubber washer, complete all as specified and directed.
2
-
-
... More
S&F IN REPAIR 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.
10
-
-
... More
S&F IN REPAIR 75mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.
34
-
-
... More
S&F IN REPAIR uPVC (SWR) bend any radius with access door, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed.
4
-
-
... More
S&F IN REPAIR uPVC (SWR) bend any radius with access door, suitable for 75mm bore pipes, including jointing with solvent, complete all as specified and as directed.
4
-
-
... More
S&F IN REPAIR uPVC (SWR) branch pieces, suitable for 110mm bore pipes, (single Y/T), equal or unequal, ordinary or inverted with oval access door, including jointing with solvent, complete all as specified and as directed.
3
-
-
... More
S&F IN REPAIR uPVC (SWR) Floor / Nahani trap with grating of 75mm dia outlet, setting and jointing with solvent, complete all as specified and as directed.
5
-
-
... More
S&F IN REPAIR uPVC (SWR) gully trap 125/100mm, setting and jointing with solvent, complete all as specified and as directed.
4
-
-
... More
M&L for acrylic polymer heavy duty fibre reinforced coating roof treatment complete by removing existing plaster / screed bed, made free from all dust, loose particles, laitance and sharp edges, fungus, algae, organic matters, repairing cracks by cutting 'V' groove along the longitudinal section of cracks and filling with polymer modified mortar admixed with Dr. Fixit Pidicrete URP at the ratio of 1:5:15 (URP : Cement :Sand respectively) and potholes and uneven surfaces shall be repaired with polymer modified mortar over a bonding coat of Dr. Fixit Pidicrete URP at the ratio of 1:1 (URP : Cement respectively), one priming/ efflorescent coat of Dr. Fixit Primeseal shall be applied by diluting the primeseal with water at the ratio of 2:1 (Primer: Water respectively) and over the primed surfaces water proof coating shall be applied with acrylic polymer heavy duty fibre reinforced coating of Dr. Fixit New Coat consisting of three coats of application to form 1mm thick heavy duty water proofing coating, complete all as per manufacturers instructions. Make: Dr.Fixit or equivalent in SIKA/Pidilite /FOSROC/ STP Limited
195
-
-
... More
M&L for Point wiring with 1.5 Sq.mm FRLSH PVC insulated unsheathed copper conductor cable, single core multi stranded 1100Volt grade conforming to IS 694: 1977, drawn in and including rigid PVC conduit not less than 20mm bore, concealed/surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, junction boxes, tees, terminal boxes with and including factory made pvc boxes with top cover plates with frame for switches / sockets etc., including one run of 1.5 Sq.mm single core FRLS PVC unsheathed copper conductor cable as earth continuity conductor and connected to common earth dolly, for one light / fan /bell point controlled by one way switch/MCB, including taking down old u/s point wiring of any type with fittings, complete all as specified and as directed. Note: Cutting chases and making good surfaces shall be included in the unit rate.
111
-
-
... More
All as per Serial Item No. 76 here-in-before but for 3 pin 5/6Amp switch socket point, on same board, complete all as specified.
20
-
-
... More
All as per Serial Item No. 76 here-in-before but for 3 pin 5/6Amp switch socket point, on independent board, complete all as specified.
10
-
-
... More
All as per Serial Item No. 76 here-in-before but with 2.5Sqmm copper conductor cable and 2.5 Sqmm cable as earth continuity conductor for 3 pin 6/16Amp switch socket point, on independent board, complete all as specified.
32
-
-
... More
S&F Switch piano flush type single pole one way 5/6Amp, 240 Volts, complete all as specified and as directed.
141
-
-
... More
S&F Socket outlet 5/6 Amps, 3 and 5 pin multipurpose, flush type, 240 Volts, complete all as specified and as directed.
30
-
-
... More
S&F Switch piano flush type single pole one way (multi pin) 15/16Amp, 240Volt, complete all as specified and as directed.
32
-
-
... More
S&F Socket outlet 15/16 Amps, 3 and 5 pin, 5 and 15Amp multipurpose, flush type, 240 Volts, complete all as specified and as directed.
32
-
-
... More
S&F Ceiling rose, 3 terminals PVC/Polycarbonate, 3 phase, isolated body, complete all as specified and as directed.
43
-
-
... More
S&F Bell push, 5Amp, 230Volt, white, and Calling Bell, ding dong type, 230Volts, AC Circuit, complete all as specified. complete all as specified.
2
-
-
... More
S&F Fan regulator, 240Volt, 120 watt electronic step & socket type regulator, for ceiling fan of any sweep, complete all as specified.
8
-
-
... More
S&F IN REPAIR LED Industrial luminaires 600mm x 600mm, 35/36 watt, 220Volt, 100 lum/W, PF0.95, AC recessed/surface type with high efficiency PMMA diffuser soft glare free light, complete with driver, holders & LED lamp and connecting up with three core flexible copper conductor cable of suitable size, complete all as specified. Make: Cat Part No. LCTLRNE-36-FO-CDL of Crompton or Equivalent make as specified here-in-after.
40
-
-
... More
S&F IN REPAIR LED Industrial light fitting 1X20watt, 220Volt, 100 lum/W, PF0.95, AC, integrated type batten, with driver and LED tube light and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified. Make: Cat Part No. CCS-100-20-65-HL2-DP-NWH of Crompton or Equivalent make as specified here -in-after.
20
-
-
... More
S&F IN REPAIR Wall light (for living room / bed room / dinning hall) B22 base including 9Watt LED bulb, and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified. Make: Cat No. LHFHCHE1TL1W020 of Havells or Equivalent make as specified here -in-after
16
-
-
... More
S&F Exhaust fan, steel body, AC single phase, 230Volt, 380mm sweep, heavy duty with blades, frame, louvers, wiremesh with all accessories and necessary fixing details, including taking down existing u/s exhaust fan and depositing to AGE E/M Store yard, complete all as specified and as directed.
4
-
-
... More
S&F Ceiling fan complete with blades, down rod of suitable size as per site requirement, 3 blade type, including electronic regulator step type and accessories, 230Volt, 1200mm sweep, minimum air delivery 210 CFM with service value 6.0BEE, with brushless direct current motor (BLDC), five star rating, including taking down existing u/s ceiling fan and depositing to AGE E/M Store yard, complete all as specified and as directed.
8
-
-
... More
S&F IN REPAIR Inverter type LED integrated batten fitting 1X20watt, with square profile & polycarbonated channel, lithium ion battery with charging time 8 to 10 hours and backup time upto 4 hours complete with all accessories, 220Volt, 100 lum/W, PF0.95, AC, with driver and LED tube light and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified. Make: Cat Part No. LHEXACP7FN1W020 of Havells or Equivalent make as specified here -in-after.
8
-
-
... More
S&F IN REPAIR LED Building Security light fitting 35Watts, 230 volts, 100lum/W, with Suitable size GI bracket made out of 32mm GI light grade pipe fixed with clamps, nuts&bolts etc., with IP 65/66 protection with LED lamp, driver, bracket with impact, corrosion resistant and all accessories, complete all as specified and as directed. Make: Cat Part No. TRP-400-35-57-SL-LM-NSR of Crompton or Equivalent make as specified here -in-after.
11
-
-
... More
S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 415 volt, 8 Way, double door, IP-42 protection with 200 Amp rated copper bus bar 415Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified.
1
-
-
... More
S&F IN REPAIR, Factory made epoxy powder coated sheet metal enclosure for DBs (Fixed flush to the wall), SPN, 415 volt, 12 Way, double door, IP-42 protection with 200 Amp rated copper bus bar 415Volt, and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s, complete all as specified.
1
-
-
... More
S&F IN REPAIR Factory made epoxy powder coated distribution board double door each TPN 4 Way (VTPN MCCB DB) with metal door (IP 43 protection), fabricated from minimum 1.6mm thick CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable, complete all as specified and as directed.
2
-
-
... More
S&F IN REPAIR MCCB 125Amp, 16kA, 415Volt, 3 pole with necessary connecting up in vertical DB, testing and commissioning, complete all as specified and as directed.
2
-
-
... More
S&F IN REPAIR MCB SPN 40 to 63Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed.
2
-
-
... More
S&F IN REPAIR MCB SP 10 to 32Amp, 10kA, 230Volt, C curve with necessary connecting up in MCB DB, testing and commissioning, complete all as specified and as directed.
40
-
-
... More
Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric FR power cable [heavy duty] of size 4.0core x 25.00Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work & cable protection pipe shall be measured and paid separately under respective items.
90
-
-
... More
Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric FR power cable [heavy duty] of size 3.5core x 35.00Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., including taking down old u/s cable, complete all as specified. Note: Necessary excavation & earth work & cable protection pipe shall be measured and paid separately under respective items.
74
-
-
... More
M&L for Circuit / Sub main wiring with two runs of 6.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 6.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit.
30
-
-
... More
M&L for Circuit / Sub main wiring with two runs of 4.0Sqmm PVC FRLSH insulated copper conductor cable, single core multi stranded 1100Volt along with one run of 4.0Sqmm as earth wire, drawn through and including rigid PVC conduit of suitable size (minimum 25mm dia), concealed /surface type, medium grade as per IS 9537 (Part 1-1983) with conduit accessories, including taking down old submain wiring of any type, complete all as specified and as directed. Note: Two runs of cable, one run of earth wire and one run of conduit shall be measured as one unit.
57
-
-
... More
Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in soft/loose soil, for foundation etc., or for laying of cable/ GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified.
30
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in soft/loose soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.
10
-
-
... More
Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.
14
-
-
... More
M&L for Dry & clean river sand cushioning in two layers, first layers of 80mm thick before laying of cable and second layer of 150mm thick after laying of cable, levelled and punned down to a depth of 100mm above the top of the upper-most cable, for cable protection in trenches, complete all as specified and as directed. Note: The punned down thickness shall be measured for payment.
12
-
-
... More
M&L for Un-reinforced Precast Cement Concrete Cable Covers, Class LV, Type - 1 flat, size 250mm X 150mm X 40mm in trenches for cable protection, embossed with "ELECTRIC" on the top surface complete all as specified and as directed.
800
-
-
... More
S&F GI pipe light grade pipe 40mm dia for cable protection, complete on pole/walls/in road etc for cable protection, complete all as specified.
10
-
-
... More
M&L for IN REPAIR Earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead 4mm GI wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of SSR Part-I, including excavation / earth work in any strata, adequate quantity of charcoal and common salt, PCC chamber with RCC 1:2:4 type B1 40mm thick cover slab with 8mm dia TMT bars @150mm c/c in bothways, suitable handle and angle iron frame of suitable size to fix the cover, with 20mm bore GI pipe light grade for watering with funnel, wire mesh and 15mm bore GI pipe medium grade for GI wire protection and 4mm GI earth wire, including testing after completion, complete all as specified and directed. Note : Earth wire will be measured after 7.5mtr from the earth strip or earth testing terminal block whichever is lesser under relevant item.
3
-
-
... More
Total Amount in Figures
-
-
-
... More
Quoted Amount in Words
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%