Military Engineer Services Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 86,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681925_1Tender No
8125/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Material and labour for, Mild steel works as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
17073.5
-
-
Supply and Fixing chain link fencing with size of mesh 50 x 50 mm and thickness of wire 2.80mm (weight not less than 3 Kg/ Sq m) including fixing of line wires/flats, rails, straining bolts etc including provision of binding wires complete all as specified and as directed Note: Supply of MS line wire and flat iron, bolt & nuts measured & paid separately
3586
-
-
Material and labour for, Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5cm long, with dia of neck 5 to 10 mm complete all as specified and as directed.
491.88
-
-
Material and labour for, Mild steel MS round bar bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
3017.13
-
-
Material and labour for, mild steel Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165
2410.53
-
-
Supply and fix, galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed Note : Each line of wire to be measured.
81.5
-
-
Material and labour for, preparation of new surfaces of steel over 10cm girth or width and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed over .
467.38
-
-
Excavation over areas, not exceeding 1.50 m wide and not exceeding 1.50 m deep and getting out in soft disintegrated rock, complete all as directed by Engr-in-charge.
29.48
-
-
Material and Labour for, Plain Cement concrete 1:4:8 Type D2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, etc all as specified and directed.
1.72
-
-
Material and labour for, RCC M-25 (Design Mix) (20mm graded stone aggregate), in foundation including rafts, footings, foundation mass concrete etc. complete all as specified and as directed.
3.6
-
-
Material and labour for, RCC M-25 (Design Mix) using 20mm graded stone aggregate as in, Columns, pillars, piers, posts and struts etc. complete all as specified and as directed.
5.93
-
-
Use and waste of formwork to sides of Column, finishing surfaces fair and even complete all as specified and as directed.
7.2
-
-
Use and waste of form work to sides of foundation concrete, finishing surfaces fair and even complete all as specified and as directed.
46.2
-
-
Material and labour for, mild steel reinforcement using TMT bars, 10mm dia and over in section, cut to length and bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia
430.12
-
-
Material and labour for, mild steel reinforcement using TMT bars, 5 mm mm dia and over upto 100 mm dia in section, as in spacers, stirrups, binders, etc., cut to length and bent to shape required, including cranking and binding with and including mild steel wire (annealed) not less than 0.9mm dia
202.24
-
-
Material and labour for, rendering 15 mm thick in CM (1:4) on on fair faces of brick or concrete surfaces, finishing services fair and even wihout using extra cement complete all as specified and as directed.
31.92
-
-
Material and labour for, preparing newly plastered surfaces of brick or concrete surfaces, and applying two coats of Cement Based Paint over a coat of cement based primer all as directed.
31.92
-
-
Returning, filling in, including spreading, leveling, watering, and well ramming in layers not exc 25 cm complete all as specified and as directed.
19.95
-
-
Removal of extra excavated earth to a distance not exc 50m and depositing at place where directed and at a level not exc 1.50 m from the starting point all as directed.
9.56
-
-
Material and Labour, for Plain cement concerete, 1:3:6 type C1 using 20mm graded stone aggregate for coping of pole, filling and mass concrete of pole, make good to road surface, hard standing etc incl necessary form work all as specified and as directed
0.44
-
-
Material and labour for, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.
Note : Mild steel sheet will be measured and paid for separately.
1025.8
-
-
Material and labour for, Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe 410_W Grade E-250 Quality B, complete all as specified and directed.
1428
-
-
Material and labour for, Mild steel, plain, black sheet (1.60 mm thick) as in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
37.8
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%