Military Engineer Services Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Military Engineer Services - MES Tender
Housekeeping Services
Eprocure
Opening Date27 May 2022
Closing Date25 Jun 2022
Tender Amount₹ 44,70,104
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_MES_526869_1Bid Award Id
ViewTender No
8295Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and disposing of debris outside MD land complete all as specified and as directed.
2.5
-
-
Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level), removing debris outside MD land, complete all as specified and as directed.
46.1
-
-
Demolition of brick work /stone masonry/pcc block masonry built in cement mortar of any description,removing debris outside MD land, all as specified and directed.
35
-
-
Dismantling of Fencing posts or struts (wood, steel RCC) any section, posts embeded in cocrete, brick work, masonry etc, including taking out embeded portion and making good distrubed ground complete all as specified and as directed
60
-
-
Dismantling of Fencing posts or struts (wood, steel RCC) any section, posts embeded in natural ground including taking out embeded portion and making good distrubed ground complete all as specified and as directed
60
-
-
Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.
1
-
-
Taking down cement plaster on brick or concrete or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete and disposing the unserviceable material outside MD land complete all as specified and directed.
100
-
-
Excavating in post holes (or similar holes) each not exceeing 0.5 cum getting out in Hard / Dense soil soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm etc complete all as specified and as directed
40
-
-
Dismantling mild steel / galvanized chain link fencing of any size and type complete all as specified and as directed.
96
-
-
Excavating in trenches, in hard / dense soil, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and getting out complete all as specified and as directed.
55
-
-
Returning, filling in (using soils), including spreading, leveling, watering and well ramming, soil in layers not exceeding 25 cm complete all as specified and as directed
25
-
-
Removing excavated surplus soil to a distance NOT exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed
30
-
-
Cutting into existing manholes for connecting new drains ,making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in plain cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) and finishing the surfaces smooth and reforming benching as required for 160 mm bore pipe.
5
-
-
All as per Serial Item No 1.015 here-in-above, but for 200 mm bore pipe.
5
-
-
Demolition of concrete of any description as in bed concrete of pipe including breaking up drain pipes of 150 / 160 mm bore (Salt Glazed stone ware / AC / RCC / UPVC) set in cement mortar complete and removing the rubbish outside MD land, providing Material and labour, for Plain Concrete bed to 150 / 160 mm bore drain pipe including packing under and haunching against the sides of pipes, after they are laid and tested, with plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) complete all as specified and as directed.
Note : Supply and laying pipes will be measured and paid for separately under respective items.
130
-
-
Demolition of concrete of any description as in bed concrete of pipe including breaking up drain pipes of 200 mm bore (Salt Glazed stone ware / AC / RCC / UPVC) set in cement mortar complete and removing the rubbish outside MD land, providing material and labour, for Plain Concrete bed to 200 mm bore drain pipe including packing under and haunching against the sides of pipes, after they are laid and tested, with plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) complete all as specified and as directed.
Note : Supply and laying pipes will be measured and paid for separately under respective items.
90
-
-
Demolition of concrete of any description as in bed concrete of pipe including breaking up drain pipes of 300 mm bore (Salt Glazed stone ware / AC / RCC / UPVC) set in cement mortar complete and removing the rubbish outside MD land, providing material and labour, for Plain Concrete bed to 200 mm bore drain pipe including packing under and haunching against the sides of pipes, after they are laid and tested, with plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) complete all as specified and as directed.
Note : Supply and laying pipes will be measured and paid for separately under respective items.
20
-
-
Material and labour for Plain Cement Concrete (1:4:8) type D2, using 40 mm graded stone aggregate as sunken slab filling mass concrete, complete all as specified and as directed.
25
-
-
Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.
31
-
-
Material and labour, for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
5
-
-
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.
60
-
-
Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and as directed.
60
-
-
Material and labour for, Plain Cement Concrete, (1:2:4), type B0, using 12.5 mm graded stone aggregates as in coping, bed plates, water troughs and the like including weathering, lightly rounded or chamfered angles and throating, including necessary forms and moulds all as specified and as directed.
8
-
-
Material and labour, for Walling of random rubble stone masonry (Bangalore type), brought to courses, well bonded, bedded and solidly hearted, built in CM(1:6), complete all as specified and directed.
3
-
-
Material and labour, for Walling of random rubble stone masonry (Bangalore type), brought up to courses, well bonded, bedded and solidly hearted, built in CM(1:6), but except stone complete all as specified and directed. NOTE :- Serviceable stones obtained from Sl item No 1 shall be reused in the work.
1
-
-
Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc providing material and labour for 4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane all as specified and as directed.
10
-
-
Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc providing material and labour for 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm in each pane all as specified and as directed.
30
-
-
Supply and fix in repairs, stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18 mm, fixed with mild steel screw & bolts all as specified and as directed.
250
-
-
Taking down tubular curtain rod, supply and fixing drapery rod, decorative type, made of 25 mm dia stainless steel (wall thickness not less than 0.63 mm), wood finish, colour and pattern as approved by GE, complete all as specified and as directed.
(Note : Price shall not be less than 100/- per RM)
60
-
-
Taking down old unserviceable rod/rail, Supply and fix stainless steel type brackets suitable to hold the curtain rod with sofio phenol (Lotto) and wooden round blocks for curtain rod of 20mm dia, decorative type fixed with steel screws and PVC cleatscomplete all as specified and as directed.
120
-
-
Supply and fixed in repairs Aluminium anodised barrel towel bolts of extruded section of length 150 mm all as specified and as directed.
30
-
-
Supply and fixed in repairs Aluminium anodised barrel towel bolts of extruded section of length 200 mm all as specified and as directed.
20
-
-
Supply and fix in repairs 100mm Aluminium anodised barrel tower bolts of extruded section complete all as specified
30
-
-
Supply and fix in repairss Aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections including taking down old sliding door bolt 300 mm all as specified and as directed.
20
-
-
Supply and fix in repairss Extruded alloy handles fabricated type anodised of size 100 mm all as specified and as directed.
30
-
-
Supply and fix in repairss Extruded alloy handles fabricated type anodised of size 150 mm all as specified and as directed.
30
-
-
Supply and fix in repairss Butt hinges medium weight cold rolled mild steel of size of hinges 100mm all as specified and as directed.
30
-
-
Supply and fix in repairss Hasp and staple safety type of size 100 mm of aluminium anodized all as specified and as directed.
15
-
-
Supply and fix in repairs, 100 mm size Mortice rim lock (4 lever), vertical type, brushed steel suitable for 25 to 40 mm thick doors screwing complete all as specified and as directed.
5
-
-
Supply and fix in repairss 40 mm dia cupboard knobs fixed with nut, screw and washer of Brass, polished complete all as specified and as directed.
20
-
-
Supply and fix in repairss 150 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.
20
-
-
Supply and fix in repairs, door closer hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg of aluminium (Die cast body) complete all as specified and as directed.
10
-
-
Supply and fix in repairs mild steel 300mm, ordinary rat tail rod pattern spring hinges, including roller and roller plate complete
15
-
-
Supply and fix in repairs, Magnetic ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed.
10
-
-
Taking down unserviceable boards as in shelves of cupboards, doors, etc., supply and fix 18/19 mm thick plywood, Grade 1 quality, interior grade, with decorative face veneers on one side and other side balancing white, fixed in shutters / shelves, complete all as specified and as directed.
20
-
-
Material and labour for, second class hardwood, plain fillets square, rectangular or triangular in section clean sawn, secured with nails or brads, fixed to cupboard shutter, cross sectional area not exceeding 3 sq cm all as specified and directed.
100
-
-
Taking down old sinks and Supply and fixing Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen over all size 915 mm x 460 mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSBSD-52 of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and directed.
10
-
-
Taking down old sinks and Supply and fixing Stainless steel sink with draining board, made out of 1.00 mm thick sheet for kitchen over all size 495mm x 420mm with bowl size 405 x 355 x 178 mm all as per Cat No.SSSB06A of Blue Star make or techno commercially equivalent in other makes specified including CP waste coupling of 40 mm dia, cast iron cantilever brackets, 40 mm dia 800 mm long corrugated PVC waste pipe, washers, connecting union etc. complete all as specified and directed.
2
-
-
Taking down unserviceable plate rack, supply and fix new Stainless steel plate rack of 0.63mm thick sheet, size 600mm x 750mm and of weight not less than 4.5kg each complete all as specified and directed.
Make: Blue star, Model No. SSKPR-311.or techno-commercially equivalent make specified here-in-after.
8
-
-
Supply and fix in repairs, Vitreous china snow white, wash hand basin of size 550 mm x 400 mm excluding chain and plug and porcelain stopper including brackets, supply and fixing of 32 mm dia, PVC corrugated / flexible waste pipe, 800 mm long and with brass waste coupling of 32 mm dia, complete all as specified and as directed.
Make : CERA, Cat No S2040103 or techno commercial equivalent in other makes, complete all as specified and as directed.
10
-
-
Supply and fix in repairs, Vitreous china, white colour, water closet pan (pedestal pattern), with PP soft seat cover, hinges, other fixing accessories set (excluding flushing cistern and flush pipe), UPVC (SWR), 'P' or 'S' trap, and connecting to drain (or outgoing pipe), flush pipe, anti syphonic pipes and removing debris outside MD land.
Make : Cat Part No S1050101 of Cera or techno commercial equivalent in other makes complete all as specified and as directed.
20
-
-
Supply and fix in repairs, Vitreous china, white colour, 'Orissa pattern' squatting pan of size 580 mm x 440 mm with UPVC 'P' trap or 'S" Trap, front or back inlet, integral foot rests, connecting to trap, flushing pipe, anti syphonic pipe, removing debris outside MD land, complete, all as per Make : Cera, Cat No S3010102 of CALINA make or techno commercially equivalent in other makes specified here-in-after.
10
-
-
Supply and fix in repairs, PVC valveless, syphonic action type, flushing cistern, Duo Flush cistern 10 ltr capacity, low level, white, with inlet, ball valve, float and handle including brackets, connections to pipes and fixing of chain and pull, or lever, complete all as specified and directed. (Cat No-502 of Prayag or equivalent in any approved make as in CA)
80
-
-
Taking down unserviceable GI tubing, supply and fixing new CPVC pipes, outer dia 20 mm, SDR 11 Plain with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.
Notes: Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe.
120
-
-
All as per Serial Item No 1.056 here-in-above, but of outer dia 25 mm dia
25
-
-
Taking down unserviceable GI tubing, supply and fixing new 20 mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.
Notes: Serviceable Taps, valves in any shall be removed before taking down pipe and same shall be re-fixed while providing new pipe.
80
-
-
All as per Serial Item No 1.058 here-in-above, but of outer dia 25 mm dia
25
-
-
Supply and fix in repairs, Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe, with provision for overhead shower, fixed complete all as specified and directed (Cat No-PIS-75H of Neptune series of Prayag or equivalent make as specified here-in-after)
35
-
-
Supply and fix in repairs, 15 mm Centre hole Basin mixture W/o Pop Up all as specified and as directed.(Cat No PIS-50 H Neptune series of Prayag or equivalent make as specified here-in-after.
5
-
-
Supply and fix in repairs, 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed.(Cat No PIS-14H Neptune series of Prayag or equivalent make as specified here-in-after)
15
-
-
Supply and fix in repairs, 100mm (4") overhead shower ABS with brass Arm (225mm) & flange including fixing to steel pipe or union complete all as specified and as directed. (Cat No BS-73 Neptune series of Prayag or equivalent make as specified here-in-after).
20
-
-
Supply and fix in repairs, 15 mm angle cock CP cast copper alloy screwed down high pressure with capstan head handle screwed both ends or for unions etc . (Cat No PIS-10H Neptune series of Prayag or equivalent make as specified here-in-after)
50
-
-
Supply and fix in repairs, Bib Cock 2-way double handle with CP flange all as specified and as directed. (Cat No-PIS-12H Neptune series of Prayag or equivalent make as specified here-in-after).
10
-
-
Supply and fix in repairs, Chromium plated long body bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-08H Neptune series of Prayag or equivalent make as specified here-in-after).
30
-
-
Supply and fix in repairs, Chromium plated bib tap 15mm dia with CP flange all as specified and as directed. (Cat No-PIS-06H Neptune series of Prayag or equivalent make as specified here-in-after).
70
-
-
Supply and fix in repairs, Health faucet, brass body with 1mtr SS braided tube & wall hook complete all as specified and as directed (Cat No-BEA-41/BEA-85 of Prayag or equivalent make as specified here-in-after)
80
-
-
Supply and fix in repairs, Towel rail stainless steel glossy finish complete all as specified and as directed. (Cat No-BA10S of prayag or equivalent make as specified here-in-after)
10
-
-
Supply and fix in repairs, Towel rack Brass glossy finish complete all as specified and directed (Cat No BA-03 of Prayag or equivalent make as specified here-in-after)
10
-
-
Supply and fix in repairs Towel ring Brass glossy finish complete all as specified and directed (Cat No BA-02 of Prayag or equivalent make as specified here-in-after)
5
-
-
Supply and fix in repairs Soap dish chromium plated brass all as per Cat Part No BA-45 of Prayag or equivlaent makes fixed in wall as per manufacturers instruction.
10
-
-
Supply and fix in repairs Mirror 600x450 x 5-6mm thick with frame cat No BLM-01F of PRAYAG or equivalent make complete all as specified and directed
25
-
-
Supply and fix in repairs PVC Mirror cabinet of size 400x500 mm (Cat No 554 of Prayag or equivalent make) complete all as specified and as directed.
10
-
-
Supply and fix in repairs Unbreakable (Square) wall mounted shelf 500mm (Cat No BEA-47A of Prayag or equivalent make as specified here-in-after) complete all as specified and directed
10
-
-
Supply and fix in repairs Unbreakable corner shelf (3Pcs set i.e, 8"-1, 10"-1 & 12"-1) (Cat No BEA-44A of Prayag or equivalent make as specified here-in-after) complete all as specified and directed
10
-
-
Supply and fix in repairs peg set of six (Cat No BEA 30 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instruction
10
-
-
Supply and fix in repairs Toilet paper holder (Cat No BA-88 of Prayag or equivalent make of CA) fixed in wall as per manufacturers instructions all as specified and as directed.
5
-
-
Supply and fix in repairs PVC connection (Suitable for Cold Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.
120
-
-
Supply and fix in repairs PVC connection (Suitable for HOT Water Supply) 15 mm size with PTMT nuts of length 450 mm, all as specified and as directed.
15
-
-
Supply and fix in repairs, 32 mm dia waste fittings, brass, chromium plated for sinks, basins, etc with long screwed shanks and flynuts, flange end complete all as specified and as directed
30
-
-
Supply and fix in repairs, 75 mm dia waste fittings ,brass, chromium plated for sinks etc with long screwed shanks and flynuts,flange end fixed in repair complete all as specified and as directed.
30
-
-
Supply and fix in repairs, 32mm dia, 800mm long PVC corrugated waste pipe complete all as specified and as directed.
137
-
-
Supply and fix in repairss PVC urinal waste pipe 32mm dia 800mm long, complete all as specified and directed
20
-
-
Dismantling of unserviceable floor trap, supply and fix PVC(SWR) floor trap 75 mm dia outlet with CP grating, including jointing with solvent cement complete all as specified and as directed.
10
-
-
Supply and fix in repairs grating doom 100 mm dia of PTMT (Minimu weight 25 grams) complete all as specified and as directed
20
-
-
Supply and fix in repairs Health faucet, with 8 mm dia, 1.2 m long, flexible tube in chrome finish, wall hook with NRV (back flow preventer), all as per Cat Part No ALD-577 of Jaquar or techno commercial equivalent in other makes complete all as specified and directed.
20
-
-
Supply and fix in repairs 15mm dia Bib tap (Minimum weight 15mm-120gms), long body, PTMT fancy type any colour screwed, for iron pipe and fixed complete all as specified and as directed.
120
-
-
Supply and fix in repairs 15mm dia Pillar tap PTMT fancy type (Minimum weight 15mm-120gms), any colour screwed, for iron pipe and fixed complete all as specified and as directed
20
-
-
Supply and fix in repairs 15mm dia angle stop valve of PTMT (Minimum weight 15mm-90gms), any colour pressed screwed, for iron pipe and fixed complete all as specified and as directed
40
-
-
Supply and fix in repairs, PVC water tank covers complete all as specified and as directed
50
-
-
Supply and fixing in repairs, EWC seat covers, white closed pattern with recessed bottom, including screws and connectors complete all as per Cat Part No B1510101 of CERA Make or equivalent in other makes, removing debris outside MD land, complete all as specified and directed.
40
-
-
Carrying out Petty repairs to arrest leaking of water in bib taps, pillar taps, stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock. GI pipe joints bottle traps etc of any description by changing the washers or any other minor accessories to make the system functional complete all as specified and directed.
80
-
-
Carrying out Petty repairs to high/low level flushing cistern by adjusting the float valve, leakage of PVC connection, PVC/GI bend replacing of rubber washer check nuts plugs etc for any type of flushing cistern complete all as specified and directed.
25
-
-
Dismantling of water tanks of 500 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 500 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
5
-
-
All as per Serial Item No 1.095 here-in-above, but re-fixing disconnected tank after carrying out repair works.
1
-
-
Dismantling of water tanks of 1000 litres capacity from roof top and supply and fixing Rotational moulded polyethylene water storage tanks (double layered) of 1000 Litres capacity with ISI mark embossed on it, (cylindrical, vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
4
-
-
All as per Serial Item No 1.097 here-in-above, but re-fixing disconnected tank after carrying out repair works.
1
-
-
Supply and fix in repairs, 20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and as directed.
10
-
-
Supply and fix in repairs, 25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 455 gms) complete all as specified and as directed.
5
-
-
Supply and fix in repairs, gun metal, globe or gate valves 20 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
5
-
-
Supply and fix in repairs, gun metal, globe or gate valves 25 mm bore (ISI marked) with iron wheel head screwed both ends for iron pipe complete all as specified and as directed.
5
-
-
Material and labour, for UPVC pipes (conforming to IS 15328) of 160 mm internal dia, foam core, self fit, 0.4 M pa (class 2) with pressure rating @ 4 Kg / Sq cm, laid in trenches including bends, elbows, etc., complete all as specified and as directed.
50
-
-
Material and labour, for UPVC pipes (conforming to IS 15328) of 200 mm internal dia, foam core, self fit, 0.4 M pa (class 2) with pressure rating @ 4 Kg / Sq cm, laid in trenches, including bends, elbows, etc., complete all as specified and as directed.
40
-
-
Material and labour, for Reinforced concrete pipes, class NP3, 150 mm dia bore of pipe laid and jointed complete with collars complete all as specified and directed by Engr-in-charge
80
-
-
Material and labour, for Reinforced concrete pipes, class NP3, 200 mm dia bore of pipe laid and jointed complete with collars complete all as specified and directed by Engr-in-charge
50
-
-
Material and labour, for Reinforced concrete pipes, class NP3, 300 mm dia bore of pipe laid and jointed complete with collars complete all as specified and directed by Engr-in-charge
20
-
-
Material and labour for, brick work, with subclass 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed
2
-
-
All as per item No 1.108 above but except brick complete all as specified and as directed.
Note: Serviceable bricks obtained during demolition shall be re-used under this item.
1
-
-
Material and labour for, 25 mm thick, Plain Cement concrete type B0 1:2:4 (12.5 mm graded agg) as in floorings, with surfaces, finished even and fair complete all as specified and as directed
20
-
-
Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing rubbish off the premises and disposing outside MD land and providing Material and labour, for non-skid Ceramic coloured tiles 7 to 8 mm thick (Grade B-IIA), area of each tile exceeding 0.06 sq m but not exceeding 0.11 sq m, as in flooring, set and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.
20
-
-
Demolition of floor, hearth or wall tiling including cement mortar bedding (including backing), removing rubbish off the premises and disposing outside MD land and providing Material and labour, for coloured Glazed ceramic printed tiles, of size 450 x 300 x 7 mm thick (Grade B-IIA) as in vertical surfaces such as skirting, dado etc., set and jointed in neat cement slurry and pointed in epoxy grout to match with the colour of tiles, laid over and including provision of backing coat of 10 mm thick rendering in CM 1:3, complete all as specified and directed.
45
-
-
Material and labour for Plain cement concrete, 75 mm thick, type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing, flooring etc complete all as specified and as directed
108
-
-
Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface, removing debris outside MD land, complete all as specified and as directed
130
-
-
Material and labour for, rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished plastered surface even and smooth without using extra cement complete all as specified and as directed
80
-
-
Material and labour for, rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished plastered surface even and smooth without using extra cement complete all as specified and as directed
180
-
-
Material and labour for, rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement complete all as specified and as directed.
Note :- Supply only WPC will be measured and paid separately
230
-
-
Supply only water proofing liquid complete all as specified and as directed
8.54
-
-
Material and labour for, rendering 5 mm thick on ceiling / RCC surfaces in cement mortar 1:3, finished plastered surface even and smooth without using extra cement complete all as specified and as directed.
50
-
-
Material and labour for, keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in Cement Mortar 1:4, complete all as specified and as directed.
3
-
-
Raking to random rubble or polygonal rubble uncoursed or brought up to courses providing Material and labour for, keyed pointing to random or polygonal rubble, uncoursed or brought upto courses in Cement Mortar 1:4, complete all as specified and as directed.
2
-
-
Preparation of newly plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistent primer over and including 1 mm thick wall care putty, complete all as specified and as directed.
Note : Quoted rate shall deemed to include for cost of wall care putty.
80
-
-
Preparation of newly plastered surfaces of wall and applying two coats of cement base paint complete all as specified and as directed.
50
-
-
Preparing newly plastered ceiling surfaces and applying three coat of white wash complete all as specified & as directed.
50
-
-
Material and labour for cleaning of PVC/RCC over head water tanks at any height (on accessible/inaccessible roofs) by removing all scale, dirt, mud, any foreign material, accumulated silt, other dirty substance, algae, fungus and any other bacterial material from sides/bottom of tank, cleaning shall be done by draining / pumping out water / sludge from bottom, by high pressure water jet of pressure not less than 120 PSI for removing clogged mud/scales etc and cleaning the same again with self priming pumped fresh water and disinfecting the water tank by using UV radiator and approved chemical (chlorite), after cleaning writing letter / figures (Date of cleaning and next Date of cleaning) on black back ground with white synthetic enamel paint including removing the existing letters/ figures complete all as specified and as directed for water tanks of capacity exceeding 250 litres and not exceeding 500 litres complete all as specified and as directed.
50
-
-
All as per Serial Item No 1.125, but for water tanks of capacity exceeding 500 litre and not exceeding 1000 ltr.
20
-
-
All as per Serial Item No 1.125, but for water tanks of capacity exceeding 100 litre and not exceeding 2000 ltr. Note: (i) Contractor shall ensure that no damages / leakage occur in tank after cleaning .
(ii) Any air lock /blockage of water flow after cleaning will be made good immediately.
10
-
-
Material and labour for spraying antiweed / non toxic solution / chemicals containing Glyphosate as per manufacture instructions and removing the weed including the roots after ensuring complete de-germification of plant/weed and cutting down the plant/trees off from roof/top sides of external walls of bldgs, in chajjas, wall junctions, junctions of GI/CI/AC/PVC pipes and taking out roots entered in wall/slabs, including making good the surface using PCC 1:2:4 type B1 or cement mortar (1:2) or brick work in CM(1:4) plastered with CM(1:4) to match with existing surface and repairing the pipes and joints which was affected by cutting down/taking out process all as specified and as directed for plants / trees located in the buildings upto four storey high, complete all as specified and directed by Engineer-in-charge. NOTE:- Contractor has to execute the work of de-generated plant/weeds as per the prior approval and directions of Engineer-in-charge.
40
-
-
All As per item no 1.128 here in before but plants located in the buildings of five to eight storey high.
20
-
-
Material and labour for cleaning of Roof (Area of Roof upto 500sqm) at height of (on accessible roof height not exc 30RM /inaccessible roofs height not exc 10RM) by removing all scale, dirt, mud, any foreign material, accumulated silt, other dirty substance, algae, fungus, leaves etc deposited over slab and making good the distrubed surfaces to match with existing surface and removing the material so obtained out side complete all as specified and directed by Engineer-in-charge.
NOTE:- Contractor has to submit the phtographic record of work done (before and after the work done duly annoted the Building No/Location) at the time of claiming the payment (RAR/Final Bill). No payment has to be made without submit the photographic records.
10
-
-
All as per Serial Item No 1.130 here-in-above, but roof area exceeding 500 Sq m each.
10
-
-
Removal of sludge from manholes of any size and depth and burying the sludge in pits with suitable depth & filled by earth and removal of surplus soil including dewatering of water complete all as directed to a place as earmarked by state auth out side the defence land . Note - Dewatering of water or mud will not be paid only sludge removed shall be considered for payment.
100
-
-
Clearing & removal of blockage, of any type in WC, bathroom, kitchen including floor/ nahani traps, soil waste/vent pipes gully trap upto 1st manhole, in any situation by way of cleaning / desludging and removing foreign materials to a place as earmarked by state authorities out side the defence land to the entire satisfaction of Engineer-in-charge.
1200
-
-
Mechanically pumping out sewage liquid from septic tanks/ manholes of any size and depth and removal the same to distance/place as earmarked by state authorities out side defence land including any type of T & P required etc. dewatering of water complete all as directed.
80
-
-
Taking down eaves gutters, soil / waste / vent pipes / rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., Supply and fix, PVC (SWR) pipes 75mm dia, type B (Conforming to IS 13592), single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.
60
-
-
All as per Serial Item No 1.135 here-in-above, but for 110 mm dia pipe.
80
-
-
Supply and fix in repairs, 75mm dia PVC (SWR) Bends, with access door of any radius .
10
-
-
All as per Serial Item No 1.137 here-in-above, but for 110 mm dia pipe.
10
-
-
Supply and fix in repairs, 75mm dia PVC (SWR) junction single (single T) equal or unequal with access door
5
-
-
All as per Serial Item No 1.140 here-in-above, but for 110 mm dia pipe.
5
-
-
Supply and fix in repairs, 110 mm dia PVC(SWR) brach piece, single(single Y) equal or un equal with access door.
5
-
-
All as per Serial Item No 1.141 here-in-above, but for 110 mm dia pipe.
5
-
-
Supply and fix in repairs, 75 mm dia PVC (SWR) brach piece, (double Y) equal or unequal with access door
5
-
-
All as per Serial Item No 1.143 here-in-above, but for 110 mm dia pipe.
5
-
-
Supply and fix in repairs, 75mm dia PVC (SWR) vent cowl.
5
-
-
All as per Serial Item No 1.145 here-in-above, but for 110 mm dia pipe.
5
-
-
Taking out carefully, cover slabs of man holes of any size and shape, removing scum/sludge including any organic or inorganic matters to a distance exceeding 50m and not exceeding 1500m and deposting eco friendly where as directed by Engineer-in-Charge, setting back the man hole cover in position with CM (1:6 ) for manhole of depth upto 1.5 m
Note: Manhole cover if required to provide new shall be measured & paid separately under respective items.
700
-
-
Alll as per Serial Item No 1.147 here-in-above, but for manholes of depth exceeding 1.5 m and not exceeding 3 m
250
-
-
Alll as per Serial Item No 1.147 here-in-above, but for manholes of depth exceeding 1.5 m and not exceeding 3 m
50
-
-
Clearing & removal of all blockage in sewage line of internal dia of 100 mm, from manhole to manhole of length not exc 20 mtr, of any dia of sewer lines, manholes of any section and any depth, in any situation by way of cleaning / desludging foreign materials as well as blockage of sewage line in between successive manholes manunally / mechanically including desludging of manhole /sewage line where required and odered by Engineer-in-charge and keeping sewer line functional, upto final drop/outlet into septic tank /central sewage system terminating in other joining zone/ area or into sewage wells complete all as specified.
Note:-
(a) Contractor shall detail his supervisor to office of AGE B/R MEG daily by 9.00 AM who will report to concerned JE B/R /Engineer-in-Charge to receive all complaints of entire area under this contract. Contd/-- 1.003
300
-
-
Contd/-- 1.150
(b) Contractor shall provide service providers (sweepers) at complaint cell located at respective AOR, attend to complaints as per the complaints regiseter including providing all requisite tools, equipments, safely measures for attending complaint and ensuring completion report by 5 PM on same day.
(c) All the complaints relating to sewage line shall be attended on same day. In case blockage in sewage line could not be detected/completed on same day and, concerned JE / Engineer-in-Charge is satisfied to the efforts taken to clear blcokage, the same shall be cleared by next day without fail.
(d) In case any complaint pertaining to clearing of blockage in sewage line is not removed /cleared within 24 hours (next day 5.00 PM), a penalty @ Rs. 200/- per complaint shall be leveied in contractor payments.
(e) Blockage cleared between two man holes irrespective of length in between shall be treated as one complaint.
-
-
-
Alll as per Serial Item No 1.150 here-in-above, but for sewer line of internal dia 150 mm
1800
-
-
Alll as per Serial Item No 1.150 here-in-above, but for sewer line of internal dia 200 mm
800
-
-
Alll as per Serial Item No 1.150 here-in-above, but for sewer line of internal dia 200 mm
200
-
-
Mechanically pumping out sewage liquid from septic tanks/manholes of any size and depth and removal the same to distance/place as earmarked by state auth out side defence land including any type of T & P required etc. dewatering of water complete all as directed.
60
-
-
Material and labour, for UPVC pipes (conforming to IS 15328) of 160 mm internal dia, foam core, self fit, 0.4 M pa (class 2) with pressure rating @ 4 Kg / Sq cm, laid in trenches and jointed in cement mortar (1:1), including bends, elbows, etc., complete all as specified and as directed.
50
-
-
Material and labour, for UPVC pipes (conforming to IS 15328) of 200 mm internal dia, foam core, self fit, 0.4 M pa (class 2) with pressure rating @ 4 Kg / Sq cm, laid in trenches and jointed in cement mortar (1:1), including bends, elbows, etc., complete all as specified and as directed.
40
-
-
Material and labour for, Pre-cast Reinforced Cement Concrete, (1:2:4), type B1 using 20 mm graded stone aggregates as in cover slabs of manholes, gully traps, drains, etc., set in CM(1:4) complete all as specified and as directed.
NOTE :- Steel for Reinforcement will be measured and paid separately.
2.5
-
-
Material and labour for, Mild steel TMT bars of 10 mm dia as in reinforcement, cut to length, bent to shape required, including cranking, bending, spirally looping for columns, hooking ends & binding with and including mild steel annealed wire of not less than 0.9 mm dia or securing with clips complete all as specified
200
-
-
Material and labour for, mild steel TMT bars of 6 to 8 mm dia as in reinforcements, cut to length , bent to shape required, including cranking, bending, spirally looping for columns, hooking ends & binding with and including mild steel annealed wire of not less than 0.9 mm dia or securing with clips complete all as specified
150
-
-
Supply and fabrication of mild steel structural work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Grade E-165 complete all as specified and as directed.
831.36
-
-
Material and labour for, mild steel screw bolts (Machine made, dia of neck 10mm) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut not exceeding 5cm long etc complete all as specified and as directed.
12
-
-
Supply and fabrication of steel as in framed work such as grills, gratings, ladders, balusters, walk ways, railing, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.
200
-
-
Supply only chain link fencing any size or type etc complete all as specified and as dicected
288
-
-
Taking down existing chain link fencing, and fixing new only chain link fencing incl line, wire any mesh, size and type to any type of standards, rails, straining bolts, etc incl provision of binding wire etc complete all as specified and as directed.
96
-
-
Taking down old concertina coil and Supply and fixing Galvanized punched type Concertina Coil with 80 spiral turns in each 9 m of recommended stretched (laid) length & 600 mm effective dia (after laying) with central core wire high tensile galvanized spring core wire (HTGS) made up of 2.6 mm dia as per IS: 4454, Part-1, Grade-II having minimum galvanizing of 230 – 250 grams per sq m, with a tape of razor sharp barbs strip of 0.5 mm thick and 19 mm width conforming to IS: 513 DD, barbs punched along the length at regular interval of 120 barbs per running meter, crimped with 4 to 5 Nos. of clips per each spire made up of Stainless Steel (SS-304) including fixing of concertina coil on support fixed through out the compound wall with the help of required u-nails / split pin, scaffolding etc; complete all as specified and as directed by the Engineer-in-Charge.
100
-
-
Taking down old barbed wire and Supply and fixing Galvanized. 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc ., complete all as specified and as directed Note :- Each line wire to be measured
5
-
-
Taking down old glass coping providing Material and labour for, broken glass copings with 25 mm thick rendering in CM (1:3) with rounded or weathered finish, using broken glass of bottle or thick glass of 63 mm thick guage embedded firmly in the mortar @ 4 Kg of glass per Sqm of rendering surfaces keeping jogged edges of the glass projecting on top of compound wall incl complete all as speicfied and directed
5
-
-
Material and labour, for Preparation of new or previously untreated plastered wall surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of cement base paint over a coat of alkali resistant primer , complete all as specified and as directed.
200
-
-
Material and labour, for preparation of new or previously untreated steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
31.76
-
-
Material and labour, for preparation of old plastered surfaces and applying one coat of synthetic enamel paint, complete all as specified and as directed.
50
-
-
Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying one coat of white wash on wall surfaces all as specified and as directed.
450
-
-
Preparation of old treated plastered or unplastered wall surfaces of any description including brooming down with steel wire brushing scrapping down smoke soot’s, moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of cement based paint on wall surfaces all as specified and as directed.
485
-
-
Material and labour for providing, exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor, over and including cemetn screed bed of 15 mm thick in CM 1:6. complete all as specifed and as directed
45
-
-
Demolishing paver block tiles, and providing material and labour for, Rubber moulded pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and no pigments, laid over and including 50 mm thick sand cushioning complete all as specified and as directed.
63
-
-
Material and labour for, Rubber moulded pre-cast Kerb stones of cement concrete 1:2:4 (20 mm graded stone aggregates) factory made, size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectely levelled surface pointed and jointed in CM 1:4 etc complete all as specified and as directed
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements