Military Engineer Services Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 80,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_700168_1Bid Award Id
ViewTender No
8623/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://https://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
M&L for Ridge or Hip tiles to suit Mangalore Pattern roofing tiles, bedded & jointed in Cement Mortar 1:6, complete all as specified and as directed.
30
-
-
... More
M&L for 2nd class hard-wood boarding 20mm thick, in any situation, clean sawn with butt joint and fixed with nails with and including dismantling old boarding of any type, complete all as specified and as directed.
100
-
-
... More
S&F 2nd class HW timber scantlings, clean sawn supplied and fixed as in framed work, with and including dismantling existing u/s timber scantling framed work 40sq.cm and over section, in any position, complete all as specified and as directed.
0.5
-
-
... More
Dismantling Battens for tiles, shingles etc, of any size including tilting fillets, battens spaced at exc 15cm, complete all as specified.
110
-
-
... More
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including taking down existing u/s sheet roof of any description, complete all as specified and as directed.
420
-
-
... More
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, with and including taking down existing u/s AC sheet roof of any description, complete all as specified and as directed.
30
-
-
... More
M&L for Mild steel Wind Tie bars with screwed ends, nuts, washers and mild steel plates for walls, chimneys, roofs, arches, etc. king rods and straining bolts conforming to Fe 290 Gde-E-165, with and including distantling existing steel work of any description, complete all as specified and as directed.
120
-
-
... More
Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in cement concrete, with and including taking out embedded portion and making good disturbed ground as directed by Engineer-in-Charge.
80
-
-
... More
Dismantling ballies, hard or soft wood, type 2, any position, except in posts and struts; including taking out iron straps, bolts and nuts, etc., if any, complete all as specified.
100
-
-
... More
M&L for Rolled Mild steel work as in tubular trusses including special shaped washer etc., complete using ERW or induction butt welded tubes conforming to IS: 1161-1979 Grade St-240, complete all as specified and as directed.
600
-
-
... More
S&F Rolled mild steel roof trusses (framed) trussed purlins, rafters, struts (beam, tee, angle channel or flat sections including distance pieces, cleats etc. conforming to grade Fe 410-W Gde E - 250 quality 'B', complete all as specified and as directed.
1200
-
-
... More
M&L for False ceiling with High Pressure Steam Cured (HPSC) 4mm thick Non Asbestos Fibre Cement ceiling boards fixed with and including powder coated aluminium snap grid of size 605mmx605mm consisting of 25 x 25 x 1.25mm aluminium angles and TEEs of size 35 x 25 x 1.25mm with GI wire of required length and 6mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying three coats of white wash on ceiling surface, with and including taking down existing u/s ceiling with frame work of any description, complete all as specified and as directed. Note: Quoted rate shall be inclusive of taking down & refixing of existing electrical fittings / fans with required extension fan rods & hooks.
200
-
-
... More
M&L for False ceiling with 10mm thick plaster of Paris
(gypsum anhydrous) decorative ceiling at any height, reinforced with GI wire mesh, fixed with and including powder coated aluminium concealed snap grid of size 605mmx605mm consisting of 25 x 25 x 1.25mm aluminium angles and TEEs of size 35x25x1.25mm with GI wire of required length and 6mm dia hanger grid suspended from trusses/ ceiling and purlins not exceeding 1200mm c/c both ways, with and including applying two coats of distemper oil emulsion over a coat of primer & cement based wall care putty on ceiling surface, with and including taking down existing u/s ceiling with frame work of any description, complete all as specified and as directed. Note: Quoted rate shall be inclusive of taking down & refixing of existing electrical fittings / fans with required extension fan rods & hooks.
50
-
-
... More
Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area n. exc 1.5 Sqm each, complete all as specified and as directed.
5
-
-
... More
Taking down chowkhat or frames with shutters (without taking off shutter from the frame) of area exc 1.5sqm but n. exc. 4.0 sqm each, complete all as specified and as directed.
10
-
-
... More
Taking down shutters of any description of area n exc 1sqm each, complete all as specified and as directed.
10
-
-
... More
Taking down shutters of any description of area exc 1sqm but not exc 2sqm each, complete all as specified and as directed.
10
-
-
... More
M&L for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints , complete all as specified and as directed.
0.5
-
-
... More
S&F 35mm thick factory made 2nd class hard wood plain, framed, panelled shutters (two panels) with lock rail and panel of 12mm veneered particle board with commercial veneering on both faces, size of rail and style as per IS - 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.
30
-
-
... More
M&L for Factory made 2nd class hard wood Glazed and skeleton shutters , 35mm thick, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain, chamfered or rounded, mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and as directed.
20
-
-
... More
M&L for solid PVC Door Frame of Size 50mm x 47mm out of 5mm prelaminated PVC sheet on both sides reinforced with M.S Square tube, supplying and fixing in opening as per sepcification and drawing, complete all as specified and as directed.
80
-
-
... More
M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube of top and bottom rails, MS frame shall be covered with heat moulded prelaminated PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelaminated PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top and bottom rail. Pannelling of prelaminated PVC sheet to be fitted in MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement as per specification and drawings, complete all as specified and as directed.
35
-
-
... More
S&F Factory made powder coated aluminium sliding type window (Triple Track type), fabricated to required size with standard aluminium sections with bottom track of size 92x31.75x1.6mm, side & top frame 92x31.75x1.4mm, top & bottom shutter rail with 39 x 17 x 1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39x27x1.4mm of approved make according to IS (thickness of powder coating not less than 50 micron) including necessary glazing clips, with and including 4mm thick sheet frosted glass for two shutters fixed with rubber gasket and SS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for wire mesh shutter fixed with aluminium beading, anodised aluminium fitting/fixture such as required number of rollers of suitable size, interlocking cleats/plates etc as required, complete all as specified and directed by the Engineer-in-Charge. Note : Quoted rate shall be inclusive of frame, shutter, sheet frosted glass, SS wire mesh and hardware such as butt hinges, tower bolts, handles, locking arrangement etc, complete as required at site.
30
-
-
... More
S&F Factory made powder coated aluminium door, fabricated to required size with standard aluminium section of size 64x38x1.4mm for frame, 47x25x2mm for vertical style, section size 46.72x44.45x1.4mm for top & central rail, 95x44.45x2mm for bottom rail, section size 19x17.3x0.80mm for glazing clip for shutter of approved make according to IS (thickness of powder coating not less than 50 micron) including necessary glazing clips, with and including 5mm thick sheet frosted glass for top panel with rubber gasket and 4mm thick aluminium composit panel board for bottom panel, with and including fittings such as hydralic door closer, handle, mortise lock heavy duty, hydralic floor spring, hinges etc., complete all as specified and directed by the Engineer-in-Charge. Note : Quoted rate shall be inclusive of frame, shutter, glass, ACP panel and all hardware complete as required at site.
20
-
-
... More
S&F Powder coated aluminium window / ventilator shutters, fixed type without sash bars, with aluminium sections weight not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing and powder coated aluminium snap beading screws (thickness of powder coating not less than 50 micron), complete all as specified and as directed. Note:- aluminium shutter shall be measured in sqm. All the aluminium fittings/fixtures such as butt hinges, tower bolts, handles etc, sheet glass shall be measured and paid separately under relevant items.
10
-
-
... More
S&F IN REPAIR Aluminium (Die cast body) Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg, complete all as specified.
5
-
-
... More
S&F IN REPAIR Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet, foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in position, complete all as specified.
5
-
-
... More
S&F MS butt hinges cold rolled medium weight 100mm size, ISI marked, complete all as specified and as directed.
70
-
-
... More
S&F Stainless Steel butt hinges, medium weight 100mm size, ISI marked, complete all as specified and as directed.
30
-
-
... More
S&F Helical door spring MS 300mm long ordinary rat tail pattern spring, ISI marked, including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed.
15
-
-
... More
S&F IN REAPIR Helical door spring MS 300mm long ordinary rat tail pattern spring, ISI marked, including roller and roller plate complete fixed to wooden/steel chowkats complete all as specified and as directed.
10
-
-
... More
S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specified and as directed.
20
-
-
... More
S&F IN REPAIR Aluminium anodised barrel tower bolt of extruded section of size 150mm long complete, complete all as specified and as directed.
15
-
-
... More
S&F 150mm long Extruded aluminium alloy 'D' type handles, fabricated type, anodised complete all as specified and as directed.
45
-
-
... More
S&F IN REPAIR 150mm long Extruded aluminium alloy 'D' type handles, fabricated type, anodised complete all as specified and as directed.
20
-
-
... More
S&F 125mm long Extruded aluminium alloy 'D' type handles, fabricated type, anodised complete all as specified and as directed.
15
-
-
... More
S&F Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed.
15
-
-
... More
S&F IN REPAIR Aluminium anodised sliding door bolt 300mm long with hasp & staple (Bolt type) and fixing clips of sheet cast or extruded section of cast aluminium alloy complete all as specified and all as directed.
20
-
-
... More
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed.
20
-
-
... More
S&F IN REPAIR Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tack or stainless wire staples, complete all as specified and as directed.
75
-
-
... More
S&F IN REPAIR SS curtain rod 20mm bore dia with brackets, fixing stops, roller bracket, wooden nobs etc., with Harrison rails, complete all as specified.
75
-
-
... More
M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed.
30
-
-
... More
M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.5Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed.
5
-
-
... More
M&L for 4mm thick Figured glass pin head type and glazing with oil putty in squares not exc 0.5 Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed.
10
-
-
... More
M&L for 4mm thick Figured glass pin head type and glazing with oil putty in squares exceeding 0.5 Sqm in each pane, with and including hacking out old broken glass (any thickness/size, quality or description) from wooden frames, glazed with putty or fixed with beads, complete all as specified and as directed.
5
-
-
... More
S&F IN REPAIR Prelaminated particle board 18mm thick, Interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to cub board shelves / cabinets etc., complete all specifed.
20
-
-
... More
M&L for Pre-cast cement concrete solid block masonary type C1, 1:3:6 (using 20 mm graded stone aggregate) exc 10 cm width and setting in CM 1:6, with and including demolition of existing brick work of any description, complete all as specified and as directed.
20
-
-
... More
M&L for PCC type B0 [1:2:4] using 12.50mm graded granite stone aggregate) as in copings, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, finished plain fair faces, complete all as specified and as directed.
1
-
-
... More
M&L for Rendering 5mm thick in CM 1:3 as in ceiling surfaces, finished even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.
20
-
-
... More
M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces of walls in CM 1:6 finished even and fair without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed.
100
-
-
... More
M&L for 15mm thick Rendering on fair faces of brick work or concrete surfaces in two layers as 10mm thick in cement mortar 1:6 followed by 5mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instructions and finish the surface even and smooth without using extra cement, with and including taking down existing cement plaster of any description, complete all as specified and as directed. Note: Supply of WPC will be measured and paid separately.
125
-
-
... More
Supply only Integral Water Proofing Compound. Make: Pidilite Industries Ltd Taloja / FOSROC / Dr Fixit / Asian paints
40
-
-
... More
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer and 1mm thick wall case putty, complete all as specified and as directed.
100
-
-
... More
M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm with and including preparation of new plastered surfaces of any description, all as per manufacturer's instructions, complete all as specified and as directed.
125
-
-
... More
M&L for preparation of new ceiling surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer, complete all as specified and as directed.
20
-
-
... More
M&L for Complete removal of existing treatment on old walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, with and including preparation of old decorated surfaces of wall, complete all as specified and as directed.
790
-
-
... More
M&L for applying one coat of oil emulsion distemper (white / Tinted) with and including preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling holes, cracks with cement base putty, complete all as specified and as directed.
400
-
-
... More
M&L for applying two coat of oil emulsion distemper (white/Tinted) with and including preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots ,filling holes, cracks with cement base putty, complete all as specified and as directed.
400
-
-
... More
M&L for Preparing old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
200
-
-
... More
M&L for Preparation of old steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed.
100
-
-
... More
M&L for Preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
50
-
-
... More
M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.
75
-
-
... More
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete, complete all as specified and as directed.
200
-
-
... More
M&L for Light Shade Coloured Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed.
200
-
-
... More
M&L for Light Shade Coloured Vitrified Ceramic tiles 08mm to 10mm thick (square/rectangular) area of each tile exc. 0.18 Sq.m. but n. exc. 0.36 Sq.m, as in skirting etc., laid over and including 10mm thick backing layer in CM (1:3), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing tiles of any type with bedding mortar, complete all as specified and directed.
20
-
-
... More
M&L for Premium quality, joint free coloured Non skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exc. 0.11 Sq.m. but n. exc. 0.36 Sq.m, as in floors etc., laid over and including 15mm thick screed bed or bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in coloured cement to match, with and including demolition of existing floor tiles of any type with bedding mortar, complete all as specified and directed.
40
-
-
... More
M&L for Premium quality, joint free ceramic glazed coloured wall tiles of 7 to 8mm thick (square / rectangular) area of each tile not exc 0.18Sqm, on vertical surfaces such as dado and the like, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over & including 10mm thick rendering in CM 1:3 and including taking down existing dado/skirting with backing mortar, complete all as specified.
70
-
-
... More
M&L for 75mm thick plain cement concrete 1:4:8 type D2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.
255
-
-
... More
M&L for 100mm thick plain cement concrete 1:2:4 type B2 (using 40mm graded granite stone aggregate) as in sub base of flooring, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.
95
-
-
... More
M&L for rubber coated chequered cement concrete coloured tiles 23-25mm thick, of approved shape and size, as in floor / path, set, jointed and pointed in neat cement slurry with grey cement and pigment, glosy finish on top, laid over and including 15mm thick screed bed in CM 1:4, including demolition of old floor of any thickness, complete all as specified.
115
-
-
... More
M&L for Factory made Machine pressed pre-cast cement concrete interlocking paver block of any shape and size with glossy finish on top, confirming to IS 15658-2006 of 60mm thick, M-35 grade with grey cement and pigment, with and laid over and including 50mm thick sand cushion (crushed stone sand / M sand) under interlocking paver block including watering and consolidation, with and including dismantling existing stone sett paving of any thickness, removing rubbish off the permises, complete all as specified and as directed.
140
-
-
... More
M&L for 75mm thick plain cement concrete 1:3:6 type C1 (using 20mm graded hard granite stone aggregate) as in plinth protection, finished even and fair without using extra cement including making construction joints in 3 mtres interval and joint filled with sealing compound, with and including demolition of cement concrete (un-reinforced) as in ground floor, complete all as specified and as directed.
50
-
-
... More
S&F 16mm outer dia, CPVC pipe SDR 11 with and including all CPVC SDR 11 fittings, fixed to walls/ceilings/ laid in floors, cutting chases as required at site and making good with CM 1:3, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.
60
-
-
... More
S&F 20mm outer dia, CPVC pipe SDR 11 with and including all CPVC SDR 11 fittings, fixed to walls/ceilings/ laid in floors, cutting chases as required at site and making good with CM 1:3, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.
50
-
-
... More
S&F 25mm outer dia, CPVC pipe SDR 11 with and including all CPVC SDR 11 fittings, fixed to walls/ceilings/ laid in floors, cutting chases as required at site and making good with CM 1:3, including testing, with and including taking down existing u/s GI pipe, complete all as specified and as directed.
60
-
-
... More
S&F IN REPAIR Bib tap, chromium plated, quarter turn, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
20
-
-
... More
S&F IN REPAIR Bib tap, 3 Way mixer Bib tap for mixing Hot & Cold water, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
3
-
-
... More
S&F IN REPAIR Bib tap, PTMT of any colour, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
100
-
-
... More
S&F IN REPAIR Chromium plated health faucet (ABS Body) with angular stop cock and stainless steel pipe 1.25m length with SS wall hook, screwed for iron pipe of 15mm bore, complete all as specified and as directed.
20
-
-
... More
S&F IN REPAIR Stop Valve, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
35
-
-
... More
S&F IN REPAIR 15mm bore chromium plated pillar taps, fancy type, cast copper alloy with capstan heads, screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.
25
-
-
... More
S&F IN REPAIR Brass Bib tap, chromium plated, Hospital Eldow / wrist operated, long handle action type, fancy type, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule of 15mm bore dia of pipe, complete all as specified and as directed.
10
-
-
... More
S&F IN REPAIR Vitreous china wash hand basin, Oval Type, white, of size 550x440mm, waste coupling and porcelain stopper including brackets including cutting for and pinning in ends of brackets, 40mm dia CP brass waste fittings, complete all as specified and as directed.
5
-
-
... More
S&F IN REPAIR Vitreous china squatting pan, Orissa pattern size 580mm x 440mm white with integral foot rest including 'P' or 'S' trap etc., with and including cement concrete bedding, complete all as specified and as directed.
3
-
-
... More
S&F IN REPAIR Vitreous china Wash down water closet pan EWC (Pedestal pattern), white with 'P'or 'S' trap étc, (excluding flushing cistern and flush pipe) including plastic water closet seat cover closed pattern with flat bottom cover, mild steel chromium plated or aluminised hinging device, fixing bolts, etc, complete all as specified and as directed.
5
-
-
... More
S&F IN REPAIR PVC valveless, syphonic action type low level flushing cistern, 10 ltrs capacity, white with inlet ball valve, float and handle soft touch type including brackets, PVC flush pipe, fixed with CP brass screws, complete all as specified and as directed.
20
-
-
... More
S&F IN REPAIR Stainless steel sink of overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, made of 1.0mm thick Stainless steel sheet 304 grade for kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, with and including PVC waste pipe and coupling, complete all as specified and directed.
3
-
-
... More
S&F IN REPAIR PVC Flexible pipe (waste pipe) 32mm bore dia, suitable for 32mm bore waste coupling of sink, WHB, etc., complete all as specified.
50
-
-
... More
S&F IN REPAIR 32mm bore dia Waste coupling of PTMT (half or full threaded) of minimum weight 45gms , suitable for 32mm bore waste pipe of sink / WHB etc., complete all as specified.
20
-
-
... More
S&F IN REPAIR 600mm x 450mm bevelled edge mirror 6mm thick of selected quality glass mounted on 6mm thick commercial plywood/ AC building board and fixed to wooden plugs with CP brass screws and cup washers and provision of wooden beading around the mirror complete all as specified and as directed by Engineer - in - Charge.
15
-
-
... More
S&F IN REPAIR Tubular Towel rail 20mm dia, 600mm long, D type, Brass chromium plated, fixed with CP brass screws, wooden / plastic cleats, completed all as specified.
5
-
-
... More
S&F IN REPAIR Brass shower rose of 15mm inlet and 125mm outlet, chromium plated with swivel joint, CP shower arm 300mm long and CP flange of approved make and quality, fixed to 15mm bore dia pipe, complete all as specified and as directed.
15
-
-
... More
S&F IN REPAIR Stainless Steel grating doom 125mm dia (minimum weight 40grams) with / without waste hole, fixed with white cement, complete all as specified and as directed.
20
-
-
... More
S&F IN REPAIR 110mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.
32
-
-
... More
S&F IN REPAIR 75mm bore uPVC (SWR) soil, waste and vent pipe, single socketed in any length with rubber ring joints, fixed to wall with brackets, complete all as specified and as directed.
15
-
-
... More
S&F IN REPAIR Low density polyethylene (LDPE) pipe of 32mm bore dia of pressure rating 6 kgf/sqcm, fixed as in waste pipe for urinal / WHB, complete all as specified.
20
-
-
... More
S&F uPVC (SWR) bend any radius with access door, suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed.
5
-
-
... More
S&F uPVC (SWR) bend any radius with access door, suitable for 75mm bore pipes, including jointing with solvent, complete all as specified and as directed.
5
-
-
... More
S&F uPVC (SWR) Vent Cowl suitable for 110mm bore pipes, including jointing with solvent, complete all as specified and as directed.
5
-
-
... More
S&F IN REPAIR uPVC (SWR) Floor / Nahani trap with grating of 75mm dia outlet, setting and jointing with solvent, complete all as specified and as directed.
5
-
-
... More
S&F IN REPAIR PVC Wall lining with 5mm thick wood grain printed PVC sheet fixed with solvent cement on existing surfaces of any description, complete all as specified and as directed.
63
-
-
... More
S&F IN REPAIR PVC Sheet fillet with 5mm thick wood grain printed PVC sheet of 35mm width, fixed with solvent cement on existing surfaces of any description, complete all as specified and as directed.
40
-
-
... More
S&F Aluminium Composite Pannel board of 4mm thick, comprising of a core containing not less than 70% non combustible mineral filling, sandwiched between two skins of 0.50mm thick aluminium alloy PERALUMAN-100 of weight not less than 7.6kg/Sqm, with all sub structures, anchors, hardware and all fittings, fixed over and including aluminium section of size 35x25x2mm and 1.0m x 0.30m panel with and including necessary frame work, screwing & scaffolding, fixed with screws / nails, with and including dismantling existing u/s boarding of any description, complete all as specified.
20
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements