Karnataka Power Transmission Corporation Limited Tender

Providing 18mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

Providing and laying in position plain cement concret of nominal mix 1:4:8 using 40 mm and down size graded granite metal machine mixed concrete laid in layers not exceeding 15cms, thick, well compacted, in foundation and plinth including cost of all materials, labour, HOM of machinery, curing, complete as per specifications.

Providing and laying flooring 40 mm thick, with an under layer of 30mm thick 1:2:4 cement concrete, using broken granite metal of 12.5mm nominal size and top layer of 10mm thick plaster with cement materials, labour, curing, complete as per specifications

Providing and fixing special make glazed vitrified glazed tiles(Granomite finish) of approved make quality and colour of size 600x600x10mm thick fixed on existing flooring with a special roffe adhesive for flooring and skirting etc., complete including providing spears at required interval and removing stains etc., complete

Dismantling plastering and removing the debris with a lead upto 200m

Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and remocign scaffolding including cost of materials, labour, curing complete as per specifications

Providing skirting, dado, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface (excluding cost of rough plastered surface which should be measured and paid separately) using glazed tiles of approved make and size including cost of materials as per specifications of size 30x45 cms

Providing Ceramic tiles of size 30x30 cms approved make shade and size for flooring, treads of steps and landings laid on a bed of of 12 mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment, including cost of materials, labour, curing, complete as per specifications.

Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, (approved make) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Removing white wash or colour wash by steel brushing and/or scraping, sand papering and preparing wall surface smooth including repairs to scraches, cost of labour complete as per specifications

Providing and finishing external walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered materials, free from mortar drops and other foreign matter cost of materials labour complete as per specifications

Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specification with primer

Applying priming coat over new wood surface and / or wood based surface after preparing the surface after throughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting liquid wood filler, for varnish including cost of materials, labour, complete as per specifications. Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning surface of all dirt, dust, and foreign matter, sand papering including cost of materials, labour, complete as per specifications

Providing and fixing of factory made 30mm PVC rigid foam (FOREX) PANEL (Door shutter)DOORS Rajeshree made from MS tube of 19 guage, size of 19mm x 19mm and covered with heat moulded PVC C channel of 5mm thick and width of 50mm to form styles and rails. The inner panel should be inserted in between the frame with 5mm thick PVC rigid foam sheet, welded/sealed to the styles and rails along with 5mm PVC, beeding on all and either sides. The vertical tubes may be filled with suitable wood material to further enhance the screw holding capacity

Providing Matti/Nandi wood frames of doors, windows clearstirt windows, ventilators and other frames, wrought framed and assembled including making plaster groves (excluding cost of cement concrete and side clamps) but including cost of materials, labour, HOM of machineries complete as per specifications.

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32 mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V. stabilized Isopthalic Gelcoat and one layer of 45 gsm E-Glass Chopped strand Mat (CSM). Impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc., shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in cofirmation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of suppy of shutters to respective work spot.

Providing and fixing in position fully paneled Honne wood shutters doors, styles and rails of 30mm thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications

Providing and fixing 4mm thick glass panes to steel windows including T.W. beading of 10 mm thick and 2 coats of approved paints

Providing and laying platform using prepolished ,water cut 40mm thick telephonic Black Granite laid on existing vertical supports and fixing in CM 1:3 proportion including cutting to required shape pattern with paper joints including full rounding for nosing etc complete as per specification inclusive cost of material labour curing as per directuins of the engineer incharge of the work

Supplying fabricating and fixing 60x6 mm MS flat for doors for locking arrangements as guard bars of required length including making necessary nitches providing painting etc complete including cost of material , labour charges for fixing etc.

Supplying and fixing alluminium handles 8" of approved make and shape

Supplying and fixing Door lock of approved make and shape

Supplying and fixing door Hinges 5" of approved make and shape

Supplying and fixing Alldrop 10" of approved make and shape

Supplying fixing alluminium tower bolt 8" of approved make and shape

Supplying and fixing watertec make 15mm dia taps