Central Food Technological Research Institute Tender

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on existing trench / wall surface as required including proper clamping and fixing. a) Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

Supply of 4.0 Core x 185.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supply of 4.0 Core x 95.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supply of 4.0 Core x 70.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supply of 4.0 Core x 50.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supply of 4.0 Core x 16.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supply of 4.0 Core x 10.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supply of 3.0 Core x 10.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. Make: Polycab.

Supplying and making end termination with brass Compression gland (Double compression glands) and Aluminium lugs for following 3.5/4.0C size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make of Alluminium Lugs and Brass Double compression gland. Glands : Dowells/Johnson. a) 3½ / 4 X 185 sq. mm (57mm)

Supplying and making end termination with brass Compression gland (Double compression glands) and Aluminium lugs for following 3.5/4.0C size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make of Alluminium Lugs and Brass Double compression gland. Glands : Dowells/Johnson. a) 3½ / 4 X 95 sq. mm (45mm)

Supplying and making end termination with brass Compression gland (Double compression glands) and Aluminium lugs for following 3.5/4.0C size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make of Alluminium Lugs and Brass Double compression gland. Glands : Dowells/Johnson. a) 3½ / 4 X 70 sq. mm (38mm)

Supplying and making end termination with brass Compression gland (Double compression glands) and Aluminium lugs for following 3.5/4.0C size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make of Alluminium Lugs and Brass Double compression gland. Glands : Dowells/Johnson. a) 3½ / 4 X 50 sq. mm (35mm)

Supplying and making end termination with brass Compression gland (Double compression glands) and Aluminium lugs for following 3.5/4.0C size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make of Alluminium Lugs and Brass Double compression gland. Glands : Dowells/Johnson. a) 3½ / 4 X 16 sq. mm (28mm)

Supplying and making end termination with brass Compression gland (Double compression glands) and Aluminium lugs for following 3.5/4.0C size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make of Alluminium Lugs and Brass Double compression gland. Glands : Dowells/Johnson. a) 3½ / 4 X 10 sq. mm (25mm)

Supplying and making end termination with brass Compression gland (Double compression glands) and Aluminium lugs for following 3.5/4.0C size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Make of Alluminium Lugs and Brass Double compression gland. Glands : Dowells/Johnson. a) 3 X 10 sq. mm (22mm)

Cutting road and making good the same including supply of extra quantities of materials i.e. agreegate, moorum screening, red bajri and labour required. Water bound macadam.(0.15 x 0.45 x 50)

Cement Concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tampling complete.(0.15 x 0.45 x 50)

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Alignment of cables for proper cable end terminations, in the soil, dismantling of unwanted existing cables, panels and switchgears as per the direction of E-I-C and depositing them in the yard.

Supplying and laying of following size HDPE pipe ISI marked / Jogeetha : Make along with all accessories like socket, bend, couplers, collars etc. suitable for the following cable sizes conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as reqd . 40mm dia (PN-6 , PE-63)

Supplying and laying of following size HDPE pipe ISI marked / Jogeetha : Make along with all accessories like socket, bend, couplers, collars etc. suitable for the following cable sizes conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as reqd . 50mm dia ( PN-6 , PE-63 )

Supplying and laying of following size HDPE pipe ISI marked / Jogeetha : Make along with all accessories like socket, bend, couplers, collars etc. suitable for the following cable sizes conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as reqd. 63mm dia ( PN-6 , PE-63)

Supplying and laying of following size HDPE pipe ISI marked / Jogeetha : Make along with all accessories like socket, bend, couplers, collars etc. suitable for the following cable sizes conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as reqd.75mm dia ( PN-6 , PE-63 )

Supplying and laying of following size HDPE pipe ISI marked / Jogeetha : Make along with all accessories like socket, bend, couplers, collars etc. suitable for the following cable sizes conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as reqd. 90mm dia ( PN-6 , PE-63 )

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings in the existing trench ( 75 cm deep) and re-filling etc. as required Make: APOLLO / JINDAL. 100mm dia

Earthing with copper earth plate 600 mm X 600 mm X 3 mm (completely tinned) thick including accessories, and providing masonry enclosure (1.5x1.5x1.5Ft) with cover plate having locking arrangement and watering pipe of 2.7 metre long etc as per IS 3043 including charcoal/ coke and salt as required including complete tinning of Copper plate / CU flat & Brazing of CU flat with CU plate. (Only SS Nut Bolts and Washers to be used)

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required.(SS Bolt Nuts & Washers should be used)

Providing and fixing 25 mm X 5 mm G.I. strip on surface or inrecess for connections etc. as required. (All Joints shall be done by overlapping and with 2 sets of SS nut bolt & spring washer spaced at 50mm)

Providing and fixing 6.0 SWG copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit / submain wiring/ cable as required.tinned at both the ends of terminal point, socketing with molten metal fixing all complete as required.

Providing and fixing of 50mm X 5 mm Tinned copper strip at 0.50 metre below ground as strip earth electrode, including heat shrinkable sleeve , Brazing of CU Flat at both end terminations connection/ terminating with nut, bolt, spring, washer etc. as required. (All Joints shall be done by overlapping and with 2 sets of SS nut bolt & spring washer spaced at 50mm)

Supply of LT Cubicle panel with AL Bus and Earth Bus of rating 440V, 50HZ of size (900x900x350mm) IP55, suitable for outdoor application (double door) made out of 14SWG / 16SWG thick CRCA sheet steel enclosure with siemens grey, powder coated with mounting PEDESTAL stand (3Ft), earth bolts on either side, RYB indicating lamps, ON/OFF indications, gland plate including suitable AL Bus-bar with a provision to fix MCCB's with the following rating. (Tentative GA Drawing attached & Final GA to be submitted for approval of E-I-C). a) 125Amps, 4P MCCB's,25KA - 01 No. MCCB's (Incomer) with Spreader links & RHOM all complete LV516312 SCHNEIDER, b) 32A DP MCB-10 Nos, c) 63A DP MCB-01 No. (Near P/H & H-Type ) MCB's - Legrand .

Supply of LT Cubicle panel with AL Bus and Earth Bus of rating 440V, 50HZ of size (900x900x350mm) IP55, suitable for outdoor application (double door) made out of 14SWG / 16SWG thick CRCA sheet steel enclosure with siemens grey, powder coated with mounting PEDESTAL stand (3Ft), earth bolts on either side, RYB indicating lamps, ON/OFF indications, gland plate including suitable AL Bus-bar with a provision to fix MCCB's with the following rating. (Tentative GA Drawing attached & Final GA to be submitted for approval of E-I-C). a)125Amps,4P MCCB's,25KA - 01 Nos. MCCB's (Incomer ) with Spreader links & all complete LV516312 SCHNEIDER, b) 32A DP MCB-12 Nos., c) 63A DP MCB- 01 No. (From SM to Boundary Wall ) MCB's -Legrand

Supply of LT Cubicle panel with AL Bus and Earth Bus of rating 440V, 50HZ of size (900x900x350mm) IP55, suitable for outdoor application (double door) made out of 14SWG / 16SWG thick CRCA sheet steel enclosure with siemens grey, powder coated with mounting PEDESTAL stand (2Ft), earth bolts on either side, RYB indicating lamps, ON/OFF indications, gland plate including suitable AL Bus-bar with a provision to fix MCCB's with the following rating. (Tentative GA Drawing attached & Final GA to be submitted for approval of E-I-C). a) 160Amps, 4P MCCB's,25KA - 01 Nos. MCCB's with with Spreader link all complete, Schneider - LV516313, b) 32A DP MCB-10Nos, c) 63A DP MCB - 01 No. (Near E1-E9) MCB's -Legrand.

Supply of LT Cubicle panel with AL Bus and Earth Bus of rating 440V, 50HZ of size (1150x1200x400mm) IP55, suitable for outdoor application (double door) made out of 14SWG / 16SWG thick CRCA sheet steel enclosure with siemens grey, powder coated with mounting PEDESTAL stand (2Ft), earth bolts on either side, RYB indicating lamps, ON/OFF indications, gland plate including suitable AL Bus-bar with a provision to fix MCCB's with the following rating. (Tentative GA Drawing attached & Final GA to be submitted for approval of E-I-C). a) INCOMER 250Amps, 4P MCCB's, 25KA - 01 No. MCCB's with spreader link all complete, Schneider - LV525313, b) 160Amps, 4P MCCB's, 25KA - 02 Nos. MCCB's (for Out going feeders To H - TYPE & Existing 120Sqmm Cable) with Spreader link all complete, Schneider-LV516313, b) 32A DP MCB-8Nos. (08 Qtrs), c) 63A DP MCB- 01 No. (Near APCOM Proposed) MCB's -Legrand.

Supply of LT Cubicle panel with AL Bus and Earth Bus of rating 440V, 50HZ of size (900x900x350mm) IP55, suitable for outdoor application (double door) made out of 14SWG / 16SWG thick CRCA sheet steel enclosure with siemens grey, powder coated with mounting PEDESTAL stand (3Ft), earth bolts on either side, RYB indicating lamps, ON/OFF indications, gland plate including suitable AL Bus-bar with a provision to fix MCCB's with the following rating .(Tentative GA Drawing attached & Final GA to be submitted for approval of E-I-C). a) 125 Amps, 4P MCCB's, 25KA - 01 No. MCCB's (Incomer) with Spreader links & all complete LV516312 SCHNEIDER, b) 32A DP MCB - 05 Nos., c) 63A DP MCB - 01 No. (Near B-TYPE 1-15 Each at pole) MCB's - Legrand.

Supply of LT Cubicle panel with AL Bus and Earth Bus of rating 440V, 50HZ of size (900x900x350mm) IP55, suitable for outdoor application (double door) made out of 14SWG / 16SWG thick CRCA sheet steel enclosure with siemens grey, powder coated with mounting PEDESTAL stand (3Ft), earth bolts on either side, RYB indicating lamps, ON/OFF indications, gland plate including suitable AL Bus-bar with a provision to fix MCCB's with the following rating. (Tentative GA Drawing attached & Final GA to be submitted for approval of E-I-C). a) 125 Amps, 4P MCCB's, 25KA - 01 No. MCCB's (Incomer) with Spreader links & all complete LV516312 SCHNEIDER, b) 32A DP MCB - 08 Nos., c) 125Amps,4P MCCB's,25KA - 01 No. MCCB's (outgoing ) with Spreader links & all complete (Near KempG A-17) MCB - Legrand

Supply of LT Cubicle panel with AL Bus and Earth Bus of rating 440V, 50HZ of size (900x900x350mm) IP55, suitable for outdoor application (double door) made out of 14SWG / 16SWG thick CRCA sheet steel enclosure with siemens grey, powder coated with mounting PEDESTAL stand (3Ft), earth bolts on either side, RYB indicating lamps, ON/OFF indications, gland plate including suitable AL Bus-bar with a provision to fix MCCB's with the following rating.(Tentative GA Drawing attached & Final GA to be submitted for approval of E-I-C). a) 125Amps, 4P MCCB's, 25KA - 01 No. MCCB's (Incomer) with Spreader links & all complete LV516312 SCHNEIDER, b) 20A DP MCB - 12 Nos. ( Proposed @ Society ) MCB's - Legrand .

Installation of LT Cubicle panel of size (H x B x D) 1150 x1200 x 350mm) IP54, at outdoors including cutting the existing basement, soil excavation, cement concrete 40mm / 20mm stone jelly neat finishing etc at a depth of 1.5ft below earth surface, grouting the panel at suitable location as per the direction of Engineer-in-charge as required all complete.