Central Food Technological Research Institute Tender

Cement concrete flooring 1:2:4 (1 cement : 2 M sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 M sand)

Providing and laying vitrified floor tiles (Vitrified tiles only will be supplied by the Dept.) in different sizes (Minimum thickness of 10 mm) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 Manufactured sand), including grouting the joints with white cement and matching pigments etc.,complete. Size of Tile 600x600 mm Note: Vitrified Tiles only will be supplied by the Dept.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and Conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm Make: SOMANY / KAJARIA / SIMPOLO Note: Vitrified Tiles only will be supplied by the Dep

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 M sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Size of Tile 600x300 mm Note: Ceramic Tiles only will be supplied by the Dept.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 300x300 mm Note: Ceramic Tiles only will be supplied by the Dept

Fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid Water Closet will be supplied by the department

Fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap Wash basin will be supplied by the department

Fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. Pedestal for Wash Basin will be supplied by the department

Providing and fixing at all heights, levela & locations Mill finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 confirming to IS 737 and dimension as per IS 2676 with charecteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with HEx cap headed self drilling / tapping stainless steel screws M6, 60mm long with 3mm EPDM seal wsher etc., all inclussive of labour, scaffolding, T&P and sundries etc complete as per direction of the Engineer-in-charge. (Cost of truss / frame work shall be paid seperately). 0.56mm, Aluminium troughed profile with center to center pitch of 200mm, depth of 32mm, overall profile width 1092mm, cover width 1000mm.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Supplying, fabricating & fixing at site Kitchen cabinet of required length with 800mm height & 600mm deep, using of 19mm thick Boiling Water Proof (BWP) ply of Kevin ply, Merino ply or Century ply as per the customized design of client. The cabinet inner shall be finished with 0.80mm thick machine pressed white laminate and edge banding. Backing sheet shall be 6.00mm thick BWP plywood finished with white laminate on both side. Top ply shall be 19mm thick. All the drawers and shutters shall be finished with 2.00mm thick machine pressed acrylic laminate and edge banding using Green laminate or Marino laminate With the following specifications & fittings: Handles : D profile - stainless steel Hinges : Hettich - soft close Telescopic channels : Hettich - soft close Tandam box : Hettich - stainless steel - 3 nos Cutlery Unit : Hettich - as per the requirement & design Dust bin unit : Pull out type - stainless steel

Supplying & fixing at site wardrobes, lofts, Book racks, Grocery racks 600mm deep using 19mm thick Boiling Water Proof (BWP) plywood of Green ply or century ply as per the customozed design of client. All the wardrobes shall have 6.00mm thick backing sheet finished with white laminate on both side. All the inner units will have machine pressed 0.80 mm thick white laminate and edge banding. All shatters will have 1.00mm thick approved colour laminte on front and 0.80mm thick white laminate inside and 1.00mm thick edge band. Wardrobe units shall have drawers with conceled handles & lock, verticle and horizontal partition as per the approved pattern, oval shape stainless steel pipe with bracket for hanger rod. All the wardrobes and lofts will have following fittings : Handles - Stainless steel - 8" length of approved design Hinges : Hettich - soft close Locks : Godrej or Europa Telescopic channel : Hettich - soft close Skirting : 4" Stainless steel bush with covering Drawer handle : concealed - approved design Mirror : Of required size fixed with SS studs

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.