Bengaluru Solid Waste Management Limited Tender

code04 - KPWD 1.4.1 Earth work excavation by manual means for drains canals waste weir draft channels key trenches foundation of Buildings and bridges and such simillar works in all kinds of soils as per drawing and technical specifications including setting out shoring strutting barricading caution lights removal of stumps and other deleterious matter excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour tools and other appurtenaces required to complete the work

code05 - KSRRB M300 14. Excavation for roadwork in all types of soil by mechanical means including cutting and loading to tippers trimming bottom and side slopes in accordance with requirements of lines grades and cross sections and transportation with a lead of 20.00 km and complete as per specifications. MORTH Specification No.301

code06 - KSRRB M2900 Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in layers not exceeding 150 mm thickness well compacted using plate vibrators including all lead and lifts cost of all materials of quality labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications. 2.1.4

code07 - KPWD 5.4 Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1 6 1 cement 6 coarse sand

code08 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1 6 12 1 cement 6 coarse sand 12 graded stone aggregate 20 mm nominal size upto plinth level with 5.1.1 Cement mortar 1 6 1 cement 6 coarse sand

code09 - SKPWD Providing and laying in position Cement Concrete for all Foundation works.The granite trap basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers well compacted using needle vibrators including all lead and lifts cost of all materials quality confirming to the requirements of relevant IS codes labour Usage charges of machinery curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates . 2.2.3

code10 - KPWD Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2185 Part I 2005 and onstructed with CM 1 4 as per IS 2572 2005 including cost of all materials labour scaffolding and curing usage charges of machinery etc complete as per specifications. 6.34 Page 17

code11 - KPWD 8.5.2 Providing 15mm thick cement plaster in single coat with cement mortar 1 4 to brick masonry including rounding off corners wherever required smooth rendering Providing and removing scaffolding including cost of materials labour curing complete as per specifications.

code12 - KPWD 8.3 Finishing walls with Acrylic Smooth exterior paint of required shade New work Two coat applied at 1.67L 10 m² over and including priming coat of exterior primer applied at 2.20 kg 10 m² with paint of approved quality to give an even shade after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge.

code13 - KPWD 2.11.a Supplying fitting and placing TMT FE 550 550D Steel Reinforcement including cost of all materials machinery labour cleaning straightening cutting bending hooking laping welding joints tying with binding wire soft annealed steel wire and other ancilary operations complete as per drawing and technical specification

code14 - KPWD 11.16.3 Providing and fixing Steel work in built up tubular round square or rectangular hollow tubes etc. trusses etc. including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge

code15 - KPWD 7.67.2 Providingfabricating and fixing Profiled Poly Urethane insulated Roof PUF Sheet having modular density 40kg m2 and size 1.06m width and 7.60m length sheets roof having external sheet of 0.5mm steel bottom sheet of 0.40mm steel with powder coated finish. The precoated sheet shall be of minimum 240MPa steel conforming to IS 14246 1995 and shal have zinc coating with minimum 120gsm as per IS 277 1992.The roofing system shallhave suitable water proof over lapping arrangments and GRIHA ceritifed.The fasting shall be of self tapping screws of required length with PVC head along with washer pre painted aluminium cap unit with build in seal arrangments.The entire roof shall be firmly fastened to the existng frame including all lead and lifts loading and unloading usage charges of machinery and equipments transportation chargeslabour charges and all other incidental charges etc.complete as per standard

code16 - KPWD 8.34.3 Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron steel works including preparing the surface after thorougly cleaning oil grease dirt and foreign matter cost of materials labour complete as perspecifications and as per directions of Engineer in charge.

code17 - KPWD 8.40 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and foreign matter including preparing the surface even and sand paper smooth cost of materials labour complete as per specifications and as per directions of Engineer in charge.

code18 - KPWD 12.84 PProviding and fixing of 2 track x 2 panel sliding windows made out of multi chambered UPVC Matching to RAL 9016 sections and with minimum TiO2 Titanium Dioxide at 6 PHR with TPE Thermo Plastic Elastomer and lead free gaskets grey color having isolated drainage and reinforced with Galvanized Iron profile through out the window frame. The outer frame having an overall size of 44mm width x 40mmheight with reinforcement of 1mm thickness and Sash with overall size of 27mm X 53mm with UPVC honeycomb structure inside in lieu of GI reinforcement. Coextruded Glazing bead for fixing of glass shall be of size 9.5mm x 21.5mm. Windows shall be provided with 5mm plain float glass standard hardwareand single point locking system with Crescent Locks. Wall thickness of frame and sash shall be of 2 mm.Maximum possible size 1219mm x 1219mm. The cost is inclusiveof all fixtures and separate charges for minor Tand Ps shall not be made

code19 - KPWD 11.6.1 Supplying and fixing rolling shutters of approved make made of required size M.S. laths interlocked together through their entire length andjointed together at the end by end locks mounted on specially designed pipe shaft with brackets side guides and arrangements for inside and outside locking with push and pull operation completeincluding the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials labour usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge

code20 - For electrical and plumbing ready made toilets etc.

code21 - Cost of the OandM of the Shredding andChopper machine standard rate for every pair of shredder and chopper for each loactions for 1 year

code22 - Labour component including 4 operators and 4 helpers for every pair of shredder and chopper for each loactions for 1 year