Agricultural Produce Market Committee Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 3,77,700Document Cost
Refer DocumentsTender Fee
₹ 5,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
APMC/2023-24/OW/WORK_INDENT180Bid Award Id
ViewTender No
APMC/2023-24/OW/WORK_INDENT180Tender Authority
Agricultural Produce Market Committee ViewPurchaser Address
-Website
http://www.arthapedia.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Others - RIDF-29 SCHEDULE B
BOQ Items
... More
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads & lift complete as per specification and as directed by the engineer of the work. this rate is inclusive of formwork.
197.77
1688217
8536.05
... More
Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 @ 6kg/ m2, slabs jointed in CM 1:3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drain- age of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. with all leads & lift complete as per specification and as directed by the engineer of the work.
791.1
925587
1170
... More
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads & lift complete as per specification and as directed by the engineer of the work. this rate is inclusive of formwork.
50.44
335534
6652.8
... More
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with all leads & lift complete as per specification and as directed by the engineer of the work. this rate is inclusive of formwork.
44.06
335016
7603.2
... More
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. with all leads & lift complete as per specification and as directed by the engineer of the work.
26.16
2067321
79011
... More
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usage& all other appurtenaces required to complete the work. with all leads & lift complete as per specification and as directed by the engineer of the work.
459.82
217955
474
... More
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2
232.68
114711
493
... More
Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401 For Grading -V Material with all leads & lift complete as per specification and as directed by the engineer of the work.
376.37
936020
2487
... More
Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting withvibratory rollertoachievethedesireddensity. with all leads & lift complete as per specification and as directed by the engineer of the work.
574.78
1470849
2559
... More
Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means. with all leads & lift complete as per specification and as directed by the engineer of the work.
2299.1
94263
41
... More
Providing and laying Dense Graded Bituminous Macadam with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30, @ 4.0 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.. Dense Graded Bituminous Macadam Grading - I for traffic 20 MSA with all leads & lift complete as per specification and as directed by the engineer of the work.
132.96
1155686
8692
... More
Providing and applying tack coat with VG-10 Bitumen using pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom FOR Bituminous surface with all leads & lift complete as per specification and as directed by the engineer of the work.
2216
26592
12
... More
Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects for traffic 20 MSA with all leads & lift complete as per specification and as directed by the engineer of the work.
66.48
700500
10537
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 14:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 140 kg/ m3 optimum moisture content to be determined during trial length construction, concrete strength not to be lessthan 7 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 t vibratory roller, finishing and curing with all leads & lift complete as per specification and as directed by the engineer of the work.
21
103320
4920
... More
Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepare sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. with all leads & lift complete as per specification and as directed by the engineer of the work.
42
283668
6754
... More
Supplying and fixing M15 grade precast cement concrete Kerb stones for Roadway, Sidewalls and gutters fixed with CM 1:3 fixed and finsihed in line as per direction of Engineer in charge. 300 x 300 x 150 mm Kerb Stone with all leads & lift complete as per specification and as directed by the engineer of the work.
504
149184
296
... More
Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.40 mm dia 2.5 mm thick with all leads & lift complete as per specification and as directed by the engineer of the work.
150
22350
149
... More
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100V as per IS- 694:2010 3C x 2.5 mm2 with all leads & lift complete as per specification and as directed by the engineer of the work.
612
69156
113
... More
Fabricating, supplying and erecting swaged tubular pole of height …Mtr having three sections, and providing twocoats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. base plate of suitable size welded at the bottom of the pole(as per IS) and 40mm dia GI / flexible PVC pipe of 1 mtr length fitted to the heavy gauge polycarbonate control box including 5way connector of size 167x125x82mm for 7.5M pole/200x160x98mm for remaining length of pole with front opening cover, with locking arrangements and suitable capacity MCB / DP switch, The pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the pole to the ground level and the coping CC shall be up to 0.6M above ground level as per IS 2713 - 7.Erection of heavy duty pole on Footpath / median 10Mt (5Mt Hb,165.1mm dia 4.85mm thick x3M Hm, 139.7mm dia 4.50mm thick x 2M Ht,114.3mm dia 3.65mm thick) as per IS 410 SP 47.with all leads & lift complete as per specification and as directed by the engineer of the work.
178
3399800
19100
... More
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories.Single bracket 1.5 Mtr. Length with all leads & lift complete as per specification and as directed by the engineer of the work. )
170
248370
1461
... More
Supplying and fixing telescopic M.S. bracket fabricated by using 0.5m length 4” dia telescopic M. S. pipe, with 2” dia 1.5m long M. S. bracket and are welded with suitable angle, using 6mm thick M. S. sheet, grip bolts & nuts, as required, suitable for 9 to 12 Mtrs. M. S. tubular pole, with necessary two coats of painting, with all other accessories.Double bracket 2x1.5 m. Length with all leads & lift complete as per specification and as directed by the engineer of the work.
17
39695
2335
... More
Supplying and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel boaard using necessary bolts,nuts, washers and wiring etc., completee with ac-3 rating and as per IS-13947 40 Amps.with all leads & lift complete as per specification and as directed by the engineer of the work.
7
42833
6119
... More
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.600mmx600mmx170mm with all leads & lift complete as per specification and as directed by the engineer of the work.
7
101640
14520
... More
Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.with all leads & lift complete as per specification and as directed by the engineer of the work.
7
33901
4843
... More
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency130lm/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 90 W with all leads & lift complete as per specification and as directed by the engineer of the work.
204
1807440
8860
... More
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires with all leads & lift complete as per specification and as directed by the engineer of the work.
204
33048
162
... More
Supplying and fixing Moulded Case Circuit Breaker(MCCB) over theexisting wood/panel board using necessary screws,bolts,nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC60947 2.(Icu=100%lcs).In 4P MCCB,all Poles should have protection for Short Cicrcuit / Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB.MCCB shall be provided with double insulation(insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open)Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.250 A 36 kA with all leads & lift complete as per specification and as directed by the engineer of the work.
7
164815
23545
... More
Supplying and fixing Moulded Case Circuit Breaker(MCCB) over theexisting wood/panel board using necessary screws,bolts,nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC60947 2.(Icu=100%lcs).In 4P MCCB,all Poles should have protection for Short Cicrcuit / Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB.MCCB shall be provided with double insulation(insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open)Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.700-800 A 50 kAwith all leads & lift complete as per specification and as directed by the engineer of the work.
1
49900
49900
... More
Supplying and fixing of Shunt trip suitable for MCCB.CBCT with all leads & lift complete as per specification and as directed by the engineer of the work.
1
1703
1703
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps SP.with all leads & lift complete as per specification and as directed by the engineer of the work.
26
10790
415
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps DP with all leads & lift complete as per specification and as directed by the engineer of the work.
3
2217
739
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63 Amps TPN. with all leads & lift complete as per specification and as directed by the engineer of the work.
7
21616
3088
... More
Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50 Hz AC with latest microcontroller based, digital readout of percentage leakage current, programmable delay/auto/ manual reset facility suitable to mount on DIN rail/ flush mounting on panel board.with all leads & lift complete as per specification and as directed by the engineer of the work.
1
9255
9255
... More
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.with all leads & lift complete as per specification and as directed by the engineer of the work.
1
9315
9315
... More
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound.with all leads & lift complete as per specification and as directed by the engineer of the work.
3
1686
562
... More
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.with all leads & lift complete as per specification and as directed by the engineer of the work.
24
12360
515
... More
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.1000 A double run of 4 x 60 x 10 mm Aluminium Strips with all leads & lift complete as per specification and as directed by the engineer of the work.
6
63480
10580
... More
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.250 A 4 x 30 x 10 mm Aluminium Strips with all leads & lift complete as per specification and as directed by the engineer of the work.
3
10305
3435
... More
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.40*40*6mm (KPWD ELE SR 2023-24,P.No.20, I.No.5.41.1)
12
3660
305
... More
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50x50x6mm with all leads & lift complete as per specification and as directed by the engineer of the work.
6
2370
395
... More
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.75 x 75 x 6 mm with all leads & lift complete as per specification and as directed by the engineer of the work.
12
6660
555
... More
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.50X100X50X6mm C channel with all leads & lift complete as per specification and as directed by the engineer of the work.
6
4536
756
... More
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.75 x 150 x 75 x 6 mm C channel with all leads & lift complete as per specification and as directed by the engineer of the work.
12
11112
926
... More
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.14SWG with all leads & lift complete as per specification and as directed by the engineer of the work.
225000
112500
0.5
... More
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.6 sqmm with all leads & lift complete as per specification and as directed by the engineer of the work.
50
4600
92
... More
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.10 sqmm with all leads & lift complete as per specification and as directed by the engineer of the work.
100
16700
167
... More
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm with all leads & lift complete as per specification and as directed by the engineer of the work.
0.6
85105
141842
... More
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 to 25 Sqmm with all leads & lift complete as per specification and as directed by the engineer of the work.
0.6
12532
20886
... More
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 240 Sqmm, 3.5 Core, (30 GI Strips - 4 x 0.8 mm with all leads & lift complete as per specification and as directed by the engineer of the work.
0.15
129400
862666
... More
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.120 to 240 Sqmm with all leads & lift complete as per specification and as directed by the engineer of the work.
0.15
4842
32278
... More
Supply of 1.1 kV, 3 Phase Aerial Bunched Cable of size 3x95+1x16+1x70 Sqmm.with all leads & lift complete as per specification and as directed by the engineer of the work. with all leads & lift complete as per specification and as directed by the engineer of the work.
7.4
3656273
494091
... More
Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x16) (Street Light Control).with all leads & lift complete as per specification and as directed by the engineer of the work.
7.4
245007
33109
... More
Supply of Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Service Connections.with all leads & lift complete as per specification and as directed by the engineer of the work.
60
15900
265
... More
Installation of Insulation piercing connector for Main to Service Line Main : 16-95 Sqmm, Tap: 4-35 Sqmm (P2X95).with all leads & lift complete as per specification and as directed by the engineer of the work.
60
7680
128
... More
Supply of Piercing connector suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connections with all leads & lift complete as per specification and as directed by the engineer of the work.
340
63240
186
... More
Installation of Insulation piercing connector for Main to Street Light Main : 16-95 Sqmm, Tap: 1.5-10 Sqmm (EP95). with all leads & lift complete as per specification and as directed by the engineer of the work.
340
30600
90
... More
Suspension Clamp Assembly 16 to 70 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook with all leads & lift complete as per specification and as directed by the engineer of the work.
200
44200
221
... More
Erection of Anchor Clamp -25 to 95 Sqmm bare/Insulated messenger. with all leads & lift complete as per specification and as directed by the engineer of the work.
200
28800
144
... More
Supply of Pole Clamp for HT/LT AB cable.with all leads & lift complete as per specification and as directed by the engineer of the work.
200
21800
109
... More
Fixing of Pole Clamp-145 mm x 95 with all leads & lift complete as per specification and as directed by the engineer of the work.
200
32000
160
... More
Supply of Eye Hook (Flat type) for fixing Clamps.with all leads & lift complete as per specification and as directed by the engineer of the work.
200
20400
102
... More
Dead End Clamp/Anchor Clamp Assembly 25 to 95 Sqmm Bare Messenger(Exclusive of Pole Clamp and Eye Hook with all leads & lift complete as per specification and as directed by the engineer of the work.
12
1824
152
... More
Erection of Anchor Clamp - 25 to 95 Sqmm bare/Insulated messenger.with all leads & lift complete as per specification and as directed by the engineer of the work.
12
1728
144
... More
Supply of Universal Hook, Bolts & nuts.with all leads & lift complete as per specification and as directed by the engineer of the work.
200
66600
333
... More
Fixing of Universal Hook with all leads & lift complete as per specification and as directed by the engineer of the work.
200
38400
192
... More
Supply of Tee - Connector - KZ3 95.with all leads & lift complete as per specification and as directed by the engineer of the work.
200
78400
392
... More
Fixing of T-Connector KZ3 95.with all leads & lift complete as per specification and as directed by the engineer of the work.
200
44800
224
... More
Straight Joint Suitable for 95 Sqmm, LT ABC - MJPT Type.with all leads & lift complete as per specification and as directed by the engineer of the work.
12
5052
421
... More
Laying of 11 kV AB Cable Straight thru' joint installation for 3 Core.with all leads & lift complete as per specification and as directed by the engineer of the work.
12
17088
1424
... More
Supply of Pre - Insulated Lug - CPTAU for 95 Sqmm.with all leads & lift complete as per specification and as directed by the engineer of the work.
60
23520
392
... More
Installation of Pre-Insulated Lug - CPTAU for 95 Sqmm..with all leads & lift complete as per specification and as directed by the engineer of the work.
60
9600
160
... More
Supply of End cap for 50/70 Sqmm.with all leads & lift complete as per specification and as directed by the engineer of the work.
10
230
23
... More
Laying of End cap for 50/70 Sqmm.with all leads & lift complete as per specification and as directed by the engineer of the work.
10
100
10
... More
Supply of PVC Wire - PVC Wire - 25 SqmmAl Wt: 6.7 Kg, Total Wt: 11.5 Kg/100 Mtr Coil with all leads & lift complete as per specification and as directed by the engineer of the work.
5
23665
4733
... More
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.2.5 to 25 Sqmm with all leads & lift complete as per specification and as directed by the engineer of the work.
0.5
10443
20886
... More
Heavy Duty Copper Terminal Long Barrel.95 Sqmm Copper Terminal, Apprx Wt: 58 Gm with all leads & lift complete as per specification and as directed by the engineer of the work.
60
7740
129
... More
Heavy Duty Copper Terminal Long Barrel.240 Sqmm Copper Terminal, Apprx Wt: 218 Gm with all leads & lift complete as per specification and as directed by the engineer of the work.
8
2840
355
... More
Brass Cable Gland 25mm. with all leads & lift complete as per specification and as directed by the engineer of the work.
2
158
79
... More
Brass Cable Gland 32 mm with all leads & lift complete as per specification and as directed by the engineer of the work.
2
190
95
... More
Brass Cable Gland 40 mm. with all leads & lift complete as per specification and as directed by the engineer of the work.
2
296
148
... More
Brass Cable Gland 45 mm. with all leads & lift complete as per specification and as directed by the engineer of the work.
2
394
197
... More
Aluminium End Terminal (Lug).16 Sqmm with all leads & lift complete as per specification and as directed by the engineer of the work.
50
100
2
... More
Supply of 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95 Sqmm, 54 GI Wires - 2.5 mm Dia.with all leads & lift complete as per specification and as directed by the engineer of the work.
0.05
44483
889666
... More
Supply of Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable.3Cx95sqmm indoor with all leads & lift complete as per specification and as directed by the engineer of the work.
2
7488
3744
... More
Supply of Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3Cx95sqmm outdoor with all leads & lift complete as per specification and as directed by the engineer of the work.
2
8134
4067
... More
Supply of Cable covering tiles 250x125x40mm. with all leads & lift complete as per specification and as directed by the engineer of the work.
50
513
10.26
... More
Supply of River sand.and spreading the same as per the directions with all leads & lift complete as per specification and as directed by the engineer of the work.
3
5292
1764
... More
Supply of RCC humepipes 2000mm long 150mm dia.with all leads & lift complete as per specification and as directed by the engineer of the work.
2
614
307
... More
Supply of Collars for RCC hume pipes with all leads & lift complete as per specification and as directed by the engineer of the work.
2
164
82
... More
Supply of GI pipe 150mm dia. with all leads & lift complete as per specification and as directed by the engineer of the work.
2
2042
1021
... More
Supply of Route and Joint indicating stones with MS Anchor rod. with all leads & lift complete as per specification and as directed by the engineer of the work.
5
665
133
... More
Earth work excavation for cable treanch of 0.5 to 0.75Mtr Width and Depth up to 1Mtr including trail pits depending on bank upto a lead of 50Mtr.Supplying and displaying danger Boards and lighting using sight rails and Sign boards at every 100Mtr wherever necessary as directed in Ordinary soil. with all leads & lift complete as per specification and as directed by the engineer of the work.
7
3388
484
... More
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff.3x95 to 150 Sqmm with all leads & lift complete as per specification and as directed by the engineer of the work.
0.05
3066
61322
... More
Making and Fixing pot head for HT Cable only.Heat shrinkable Type Terminations.3x95 to 3x150 Sqmm.. with all leads & lift complete as per specification and as directed by the engineer of the work.
4
10632
2658
... More
Covering the cables with tiles. with all leads & lift complete as per specification and as directed by the engineer of the work.
0.03
131
4367
... More
Laying and Jointing the pipes (100-150 mm Dia) including lowering in Position: Fixing Collars etc., Joining with mud mortor complete.RCC Pipe.. with all leads & lift complete as per specification and as directed by the engineer of the work.
2
138
69
... More
Laying the GI Pipe 80 mm to 150 mm dia at Drainage Water Supply Crossing including fixing collars elbows, bends, Tees and other fitting with Cuts and Threads wherever necessary complete. with all leads & lift complete as per specification and as directed by the engineer of the work.
2
186
93
... More
Fixing of Route Joint Indicating Slab.. with all leads & lift complete as per specification and as directed by the engineer of the work.
3
348
116
... More
11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification(Dwg No. BESCOM/GM/QS&S/-- Dtd 24.11.2018 with all leads & lift complete as per specification and as directed by the engineer of the work.
1
243472
243472
... More
Supply of Load Break switches with Panel with all leads & lift complete as per specification and as directed by the engineer of the work.
1
73239
73239
... More
Erection of HT metering Cubicle on Platform.. with all leads & lift complete as per specification and as directed by the engineer of the work.
1
1844
1844
... More
Erection,Alignment and fixing of Load break switch on the platform. with all leads & lift complete as per specification and as directed by the engineer of the work.
1
2078
2078
... More
Construction of platform (1.5x1.5x1.2) mtr in size stone,cement concrete for erection of Metering cubical,Transformer and Load break switch: Excavation of (1.5x1.5x1) mt pit for foundation providing and laying cement concrete 1:4:8 for foundation laid in 10cm thick layers, well compacted curing etc., complete providing and construction of stone masonary 0.9m below ground level and 1.2m above ground level neatly hammer dressed in cement morter 1:6. Providing cement concrete Skab(1.5x1.5x0.10)Mtr with cement concrete 1:2:4 mix forming and cutting complete providing pointing to stone masonary in cement morter 1:3 after racking joint & nisely lining curing etc., plastering the concrete surfaces in cement morter 1:4 including smooth randering curing etc., curing at every stages completely .Rate Prepared as per sub estimate using CSR 2023-24 with all leads & lift complete as per specification and as directed by the engineer of the work.
4
87028
21757
... More
supply of Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014.21. 250 kVA, Aluminium Wdg, Star 2 (5 Star). with all leads & lift complete as per specification and as directed by the engineer of the work.
1
542696
542696
... More
Erection of 200 - 250 kVA Transformer.with all leads & lift complete as per specification and as directed by the engineer of the work.
1
2278
2278
... More
Providing chain link fencing 50mm size of 8 guage properly stretched between rectangular poles and fixed with suitable bolts & nuts, the free ends shall be welded to the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lifts, cutting, bending wherever necessary, wastage and lapping etc., complete as per the direction of the engineer incharge for work including two coats of approved quality paint over one coat of primer paint Rate Prepared as per sub estimate using with all leads & lift complete as per specification and as directed by the engineer of the work.
1
249093
249093
... More
Supplying and fixing Moulded Case Circuit Breaker(MCCB) over theexisting wood/panel board using necessary screws,bolts,nuts,necessary phase separators,handle and wiring complete.Protection of Over load and Short circuit with adjustable thermal magnetic release,Microprocessor release shall have Earth Fault as per IS/IEC60947 2.(Icu=100%lcs).In 4P MCCB,all Poles should have protection for Short Cicrcuit / Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non Priority loads must be available in the MCCB.MCCB shall be provided with double insulation(insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open)Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.700-800 A 50 kA with all leads & lift complete as per specification and as directed by the engineer of the work.
1
49900
49900
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32 Amps SP.with all leads & lift complete as per specification and as directed by the engineer of the work.
3
1245
415
... More
Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. with all leads & lift complete as per specification and as directed by the engineer of the work.
1
1425
1425
... More
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C with all leads & lift complete as per specification and as directed by the engineer of the work.
3
1545
515
... More
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.1000 A double run of 4 x 60 x 10 mm Aluminium Strips with all leads & lift complete as per specification and as directed by the engineer of the work.
2
21160
10580
... More
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.75 x 75 x 6 mm with all leads & lift complete as per specification and as directed by the engineer of the work.
3
1665
555
... More
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint.75 x 150 x 75 x 6 mm C channel with all leads & lift complete as per specification and as directed by the engineer of the work.
3
2778
926
... More
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.14SWG with all leads & lift complete as per specification and as directed by the engineer of the work.
125000
62500
0.5
... More
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts..with all leads & lift complete as per specification and as directed by the engineer of the work.
18
76608
4256
... More
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip GI Strip. 25x3mm with all leads & lift complete as per specification and as directed by the engineer of the work.
50
4100
82
... More
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip 50x6mm GI strip with all leads & lift complete as per specification and as directed by the engineer of the work.
20
4360
218
... More
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip with all leads & lift complete as per specification and as directed by the engineer of the work.
30
17100
570
... More
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 6 mm Copper strip with all leads & lift complete as per specification and as directed by the engineer of the work.
20
22000
1100
... More
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required.600 x 600 x 3 mm Copper plate with all leads & lift complete as per specification and as directed by the engineer of the work.
6
44526
7421
... More
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc. 8 SWG. Copper Wire with all leads & lift complete as per specification and as directed by the engineer of the work.
50
2900
58
... More
TOTAL AMOUNT
-
25174590
-
... More
Section officer Assistant Executive Engineer
-
-
-
... More
MDP Sub Division
-
-
-
... More
GADAG
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements