Water Resources Department Tender

Suplying all materials labour tools & equipments for fitting & fixing 200mm dia MS cap over casing pipe complete job(DWSD item 120B)

Supplying 150 mm dia submersible pump sets confirming to IS:8034 & moter confirming ti IS:9283 pump shall be suitable for various delivery head & dischrge with stainless steel pump shaft and polypropelene/ noryl impeller. morter suitable for 2 HP 8 Stage

Supplying 3 core PVC insulated, PVC sheathed copper conducter flat submerssible cable- 3 core 4 sq. mm i) Inside the bore well and ii)Panel board to bore well

Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 40 mm OD Confirming to IS -4984, 14151, 12786, 13488 and various gardes like PE 100,PN-10 and newly invented PE-100+ materials rates are ex-factory

Supplying G.I. pipe i) 32mm dia ,GI Pipe.( Rising )

union - 32mm dia union Socket

Nipple - 32mm dia Nipple

Tee - 32x32x32mm dia tee

Scoket - 32mm dia

Elbow - 32mm dia

Providing and. fixing G-M non return valve horizontal /Vertical type of approved quality as per specification and direction of E/I.- 32mm dia

Providing and fixing G-M Full way/Gate Valve/ Stop Cock of approved quality as per specification and direction of E/I.- 32mm dia

Supply installation testing and commissioning of ongrid solar photovoltaic power plant conforming to MNRE specification as amended constisting of Monopoly crystalline silicon solar cells net metering facility necessary protections earthing mounted on Aluminium /Gi structure of suitable strength with following components complete as required a. Solar photovoltaic module of capacity 330 WP or above manufactured as India conforming ti IS 14286/IEC 61215 IS/Tec 61730 Part-1 15/IEC61730 part-2. solar photovatic module conservation efficiency shall not be less than 16.5% PV modules used in solar power plants systems must be warranted for their output peak watt capacity which should not be less than 90% at the end of 10years and 80% at the end of 25 years. b. power conditioning unit (PCU) of 350-800V DC input voltage range and 400V AC three phase. 4 wire 50HZ+/-2.5HZ output voltage suitable to generate AC power with efficiency not less than 3% and suitable for ambient temperature from 0 to 50 degree C the PCU shall adjust the voltage and frequency level to suit the Grid voltage frequency. c. data monitoring system complete with accessories. d. fixing and array juntion box & main juntion box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands bags and other accessories etc as required e. lighting and surge voltage protection f. connections & enterconnections by supplying & fixing required size XLPE insulated copper conductor 1.1KV grade armounded power and control cable between solur modules main power cable to grid supply PCU unit along with

Supply and labour fabricating erecting hosting and fixing in position structural steel work in R.S joint channel, angel, Tee, flat plate lattice member build up compound section in column grider stair case or truss including cost of gusset plates holding down bolts anchor plates at all height and depth bolting welding (mechinging wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing building specification and direction of E/I.

Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item - A0 and disposal of excavated earth as obtained to a distance upto 50M including all lifts levelling, ramming the foundation trenches, removing roots of trees, shurbs all complete as per approved design, building specification and direction of E/I.

Providing coarse clean Sand in Filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/I. (Mode of measurement compacted volume).

Providing designation 75A one brick flat soling joints fitted with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing designation 75B brick work in C.M. (1:6) in foundation and plinth approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 Cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

Providing designation 75B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, costs of screening, materials, scaffolding, raking out joints to 15mm depth curing taxes and royalty all complete as per building specification and direction of E/I.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plainwindow sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Providing 50mm thick cement concrete flooring(1:2:4) with 20mm to 6mm. Size graded stone chips finished with flooring coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/I.

Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Providing 6mm thick cement plaster (1:4) in ceiling with clean of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.

Supplying, fitting and fixing 20 guage G.C.I. Sheet gate fitted on M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I.

Providing Toe steel reinforcement of 10 mm dia rods as approved desing and drowing --do--do-- (a) 10mm (TMT coil Fe 500) {Only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro and Vizag(RINL)

Supplying fitting & fixing MS Grill made of 20x6 mm MS flats or 16mm. M.S. square bars fitted on 25x25x6mm. M.S. Angle frame of size 60x60x6mm. Indluding cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) block of required size, applying a priming red lead paint over steel work, tases all completed as per drawing specificaion and direction of E/I (when steel is not supplied by the deptt.)

Providing two coats of snowcem of approved shade and make over new surface including washing cleaning, and preparing the walls, scaffolding, curing and taxes all complete as per building specification and direction of E/I.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all complete as per building specification and direction of E/I.

Providing centring shuttering and removal

Carriage of Materials - Cement

Sand

Stone Chips

Bricks

Steel

GST 18%

Labour Cess1%