Urban Development Department Tender
... More
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Technical
Technical
Additional Eligibility
Technical Capacity
... View More
The bidder is required to have experience in works of a similar nature and size for each of the last five years. The specific requirements include prior work experience in civil engineering construction work, with details of each project, including project name, name of the employer, description of work, contract number, value of contract, date of issue of work order, stipulated period of completion, and actual date of completion. The bidder should have completed a total value of civil engineering construction work in the last five years. The bidder should also provide information on the quantities of work executed as a prime contractor or nominated sub-contractor in the last five years. The bidder should have achieved a minimum annual financial turnover of an amount indicated in the Appendix (usually not less than one and a half times the estimated cost of the project) in any one year. The bidder should have satisfactorily completed at least one similar work of value not less than the amount indicated in the Appendix (usually not less than 50% of the estimated value of the contract) in the last five years, with a completion rate of not less than 90% of the contract value. The bidder should have completed a project of at least 50 percent of the contract value within the last five years. The bidder should provide evidence of access to or availability of credit facilities (minimum 10% of estimated cost) certified by the bankers, and an undertaking that the bidder would be able to invest a minimum of 25% of the contract value of work during implementation of the contract. The bidder's prior work experience is also evaluated based on their technical qualification, which includes the submission of affidavits, auditor reports, and information on the availability of key plants and equipment. The bidder's performance in previous works is also considered, and any record of poor performance may lead to disqualification. Specific values and percentages mentioned include:
- 50% of the estimated quantity of earthwork, brick work, GSB work, steel reinforcement, cement concrete, and paver block.
- 90% completion rate of the contract value.
- 10% of the estimated cost for credit facilities.
- 25% of the contract value for investment during implementation.
- 20% of the value of the work not completed, representing the Employer's additional cost for completing the Works.
- 2% of the contract price as the minimum amount for Performance Security.
- Rs 5.00 Lakhs as the amount to be withheld for failing to supply "as-built" drawings by the date required.
Costs
EMD
₹ 2,95,000Document Cost
₹ 29,500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UDD_100043_1Tender No
35/ENG 2025Tender Authority
Urban Development Department ViewPurchaser Address
-Website
http://http://juidco.jharkhand.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume).
11.6
-
-
... More
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
370.88
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level
1:2:4 (20 mm nominal size)
10.33
-
-
... More
Providing designation 75 B brick work in C.M.(1 :6) in foundation & Plinth with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.
16.14
-
-
... More
Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.
124.49
-
-
... More
Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.
107.15
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering and shuttering --- do------ 1:1.5:3 (20 mm nominal size)
28.61
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement: with 1.1.5.3
70.49
-
-
... More
Reinforced cement concrete work in walls(any thickness),including attached pilasters, buttresses,plinth and string courses,fillets columns,pillars,piers,abutments,posts and struts etc.above plinth level up to floor five level,excluding cost of centering,shuttering,finishing and reinforcement: 1:1.5:3(1 cement :1.5 coarse sand(zoneIII):3 graded stone aggregate
117.86
-
-
... More
Providing and laying damp proof course 50 mm thick with cement concrete M-150 with nominal mix of (1:2:4) ….do…..
5.29
-
-
... More
Providing tor steel reinforcement of 8mm.,10mm,12mmm&16mmmdia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. Taking 8mm TMT FE 500 ( only valid for Tata (Tiscon) SAIL, JSPL, Electro Steels Ltd., Bokaro, & Vizag (RINL)
5.5.4 8 mm dia
5.47
-
-
... More
10 mm dia
6.27
-
-
... More
12 and above dia
5.58
-
-
... More
centering and shuttering including strutting, propping etc. and removal of form for
667.17
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
27.18
-
-
... More
Lintels,beams,plinth beams girders,bressumers and cantilevers
282.81
-
-
... More
Suspended floors,roofs,landings,balconies and acess platform
229.9
-
-
... More
shelves
5.36
-
-
... More
Columns,pillars,piers,abutments,post and struts
288.68
-
-
... More
stairs,(excluding landing)except spiral-staircases
14.5
-
-
... More
Supplying, fitting and fixing 35 mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with block board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I.
13.01
-
-
... More
Providing & fixing pressed steel door frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges ,jamb, lock jamb, bead and if requiredangle threshold of mild steel angle section 50 X 25mm, orangle threshold of mild steel angle section 50 X 25mm, orbase ties of 1.25mm pressed mild steel welded or rigidlyfixed together by mechanical means, adjustable lugs withsplit end tail to each jamb including steel butt hinges split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and 2.5mm thick with mortar guards, lock strike-plate andshock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by the Engineer Incharge - Profile - B - Fixing with adjustable lugs with split end tail to each jamb
33.54
-
-
... More
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinfoorced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Enginner-in-Charge.
25.15
-
-
... More
30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm . 19mm for styles and 15x15mm for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on eigher side forming styles: and 5 mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mmshall be tapered in 45 degree on the inner side to form top and bottom raiil and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided eigher side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer's specificatio n& drawing (for W.C. and bathroom door shutter).
8.13
-
-
... More
providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) tramsparent or dyed to required colour or shade with necessary screws etc. complete 125X75X4mm
27
-
-
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete Twin rubber stopper
4
-
-
... More
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transpoarent or dyed to required colour or shade with necessary screws etc. complete 150X10mm
12
-
-
... More
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or deyed to required colour or shade with nuts and screws etc. complete 250X16mm
12
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285 fixing with dash fasterners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required DPDM rubber/neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/panelling C.P. brass/stainless steel screws, all complete as per architetural drawings and the directions of Engineer-in-charge (Glazing, panelling and dash fasteners to be paid for separately)
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required inlcluding the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) --- Polyester Powder coated aluminium (minimum thickness of powder coating 50 micron)
99
-
-
... More
Providing and fixing glazing in aluminium door, windows, ventilators, shutters and partitions etc, with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge (cost of aluminium snap beading shall be paid in basic item)
With float glass panes of 4mm thickness
18.59
-
-
... More
Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)
1298.07
-
-
... More
supplying,fitting and fixing fully glazed door,window or ventilators of standard rolled Z and mullion steel sections and size as per IS 1038 joints met …....do….all as per specification and direction of E/I.
1.95
-
-
... More
Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)
8
-
-
... More
Providing and fixing stainless steel (grade 304) railing made of Hollow tubes, channels, plates etc,. Including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessry stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasterners etc,.)
211.68
-
-
... More
Providing and laying 15 to 23mm thick Kotah stone tiles in risers of steps, skirting and pillars of approved size, taxture and colour and over 12mm thick cement mortar (1:3) and joined with grey cement slury mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, txes and royalty all complete as per building specifiction and direction of E/I.
64.42
-
-
... More
Providing and laying double charged Vitrified floor tiles in different sizes (thickness to be specificed by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622/ISO 13006 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting thenjoints with white cement and matching pigments etc. complete size of tile 600X600mm
65.17
-
-
... More
Providing and laying rectified glazed ceramic floor tiles 300x300m or more (thickness to be specified by manufacture) of 1st quality conforming to IS:15622 with approved make in colours white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments, etc all complete.
16.59
-
-
... More
Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. a With "A" grade white 15 x 15 cm tiles.
108.85
-
-
... More
Providing 12 mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
1233.05
-
-
... More
Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
190.02
-
-
... More
Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l.
376.42
-
-
... More
Providing and applying Plaster of Paris Putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.
650.06
-
-
... More
Providing two coats of oil bound distemper ofapproved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I.
638.91
-
-
... More
Providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete
400.36
-
-
... More
Finishing walls with premium acrylic smooth exterior paint with sillicone additives of requited shade . New work : 2 or more coats applied @1.43 Ltr/10sqm over and including base coat of waterproofing cement paint applied @2.2 Kg/10 sqm
690.32
-
-
... More
Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including cleaning the surface after removing dirt, scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specifcation and direction of E/I.
3.14
-
-
... More
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
87.1
-
-
... More
Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia
91.46
-
-
... More
Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
Bend 87.5 degree
110x110x110mm
12
-
-
... More
Shoe (Plain) 110 mm shoe
12
-
-
... More
Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means 50X50X50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete - 110mm
36
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
6
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required.
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
2
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931.
15 mm nominal bore
7
-
-
... More
Providing and fixing PTMT swiveling shower, 15 mm nominal bore, weighing not less than 40 gms
7
-
-
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
2
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931
2
-
-
... More
Providing and placing on terrace (at all floor levels) Polythene water storage tank of IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overflow pipes but without fittings and thebase support for tank. (e.g. Sintex etc.)
10000
-
-
... More
providing and fixing white vitreous china flat back or wall corner type lipped front urinal…....do…E/I
one urinal basin with 5 litre white p.v.c automatic flushing cistern
2
-
-
... More
Providing and fixing chlorinated polyvinl chloride (cpvc) pipes having thermal stability for hot and cold water supply including all cpvc plain &brass theaded fitting,including fixing the pipe with clamps at 1.00 spacing.This includes cement ane testing of joints complete as per direction 20mm nominal dia pipes
146.34
-
-
... More
32 mm nominal dia pipes
65.85
-
-
... More
Constructing masonry chamber 60x60x75cm inside,in brick work in cement mortar(1:4)for water meter completewithC.I double flap surface box 400x200x200mm inside with locking arrangement and rcc top slab 1:2:4…...do…. Chamber
4
-
-
... More
Making soak pit 2.5m diameter 3.0 meter deep with 45x45 cm dry brick honey comb shaft with bricks and s.w drain pipe 100mm diameter 1.8m long complete as oper standard design
Soak Pit
1
-
-
... More
Water proofing for old and new roof slab….... Do........
176.02
-
-
... More
Bricks - 7KM + 1 km.
74.72
-
-
... More
Local sand 18 km
11.6
-
-
... More
Sand - 49 km
474.95
-
-
... More
Chips - 15km
1908.82
-
-
... More
Stone Dust (Lead 15 KM)
576.96
-
-
... More
Earth (Lead 01 KM)
2137.66
-
-
... More
Stone Boulder (Lead 29 KM)
240.49
-
-
... More
Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.
2137.66
-
-
... More
Stone Crusher Dust finer than 3 mm with not more than 10% Passing 0.075 sieve at quarry.
576.96
-
-
... More
Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttring- All work up to plinth level.
1:1.5:3 (20 mm nominal size)
687.84
-
-
... More
Providing two coat of Snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper ……..do……
724.65
-
-
... More
Construction of granular sub-base by providing close graded material,mixing in a mechaniclal mix plant at OMC,carriage of mix Material to work site, spreading in uniform layers with moter grader on prepared surface and compacting with vibratory power roller to achieve the desired density complete as per clause 401.
882.68
-
-
... More
Providing and laying 80 mm Thick factory made Cement Concrete paver block of M-40 grade made by block making Machine with strong vibretory compaction of approve size,design and shape ,laid in rerequired collour and pattern over bed as per revalent IRC Code ,filling the joints with fine sand etc all complete as per direction of Engineer -in -Charge.
4965.61
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 6" dia Pipe
1584
-
-
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.80 mm thick with zinc coating not less than 275 gm/m²
132.32
-
-
... More
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :9.47.1 20 mm dia (heavy type)
4.2
-
-
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.10.16.3 Electric resistance or induction butt welded tubes
4704
-
-
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I.limpet and bitumen washers complete.12.4.2 0.63 mm thick with zinc coating not less than 275 gm/m²
GI Ridge
14.02
-
-
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 12.7.2 0.63 mm thick with zinc coating not less than 275 gm/m²
G.I. SHEET GIRDER
28.04
-
-
... More
Supplying and laying (properly as per design and drawing) rip-rap with good quality of boulders duly packed including the cost of materials, royalty all taxes etc. but excluding the cost of carriage all complete as per specification and direction of E/I.
240.49
-
-
... More
NVR 16 CHANNEL
2
-
-
... More
PTZ CAMERA 5MEGA PIXEL
1
-
-
... More
PTZ CAMERA 5MEGA PIXEL
3
-
-
... More
DOME CAMERA 5 MEGA PIXCEL
12
-
-
... More
BULLET CAMERA 5MEGA PIXCEL
16
-
-
... More
POE SWITCH 8 PORT
4
-
-
... More
CAT 6 CABLE
485
-
-
... More
INSTALLATION
32
-
-
... More
HARD DISK 2 TB
1
-
-
... More
supplying and drawing following sizes FR PVC insulated copper conductor ,singe core cble in the existing/recessed steel/PVC conduit as required JSR 1.15
2 X 1.5 sq mm
450
-
-
... More
2 X 2.5 Sq mm
325
-
-
... More
2 X 6 sq.mm
325
-
-
... More
10 Sq mm ISI marked, FR LS PVC insulated, single core copper conductor cable
70
-
-
... More
35 sq.mm ,3.5 core alluminium armoured cablr
70
-
-
... More
S/F modular type switch/socket : Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
5 pin 5/6 amp 3 pin socket outlet
15
-
-
... More
5/6 amps. One way Switch
20
-
-
... More
15/16 amp one way switch
10
-
-
... More
15/16 amps.6 pin socket outlet
15
-
-
... More
25 mm dia ISI marked ,PVC conduit
450
-
-
... More
Batten holder:- supplying and fixing batten/angle holder including connection as required
12
-
-
... More
S/F Ceiling rose:- Supplying and fixing 2pin 5amp. Ceiling rose on the existing juction box/wooen block includinhg connection as require
16
-
-
... More
Decorative ceiling fan 48"(1200)
8
-
-
... More
9" (300mm) ,metal exhaust fan
4
-
-
... More
Electronic step fan regulator delux
8
-
-
... More
S/F modular boxes,base &cover plate:- supplying and fixing following size/modules,GI box along with modulerbase& cover plate for moduler switches in recess etc as required switch/ socket on the existing switch box/ cover including connections etc. as required.JSr 1.27
4/5 module(78mmx140mmx50mm)
15
-
-
... More
6 module(78mmX205mmx50)
10
-
-
... More
8/9 module (78mmX230mmX60mm)
5
-
-
... More
12 module (135 mm x 205 mm X 60 mm)
10
-
-
... More
6 way, SPN single door MCB DB
5
-
-
... More
8 way,(4+24),TPN MCB DB single door
6
-
-
... More
6 amps MCB SP
30
-
-
... More
6 to 32 amps. Rating MCB SPN C series 10 kva
12
-
-
... More
100 amps,4 pole RCCB,100mA/300mA
2
-
-
... More
50/63 amps ratingTPN MCB C series 10 kva breaking capacity
4
-
-
... More
Providing ad fixing following capacity busbar chamber with 4 strip of length 300 mm made of copper suitable for following capacity complete with all accessories including connection,earthing the body etc as required
100 amps
1
-
-
... More
Sheet metal ON/OFF load changechangeovercapacity 4 pole with side handle in existing metal boardincluding drilling holes in metal board ,marking connection earthing the body etc as required
100 amps 4 pole
1
-
-
... More
LED Flood light 120 Watt
4
-
-
... More
15/16 Watt LED Bulb
10
-
-
... More
Vertical type panel board(4'x5')
1
-
-
... More
80mm dia Earthing electrode 2mtr Lendth / 80mm dia Earthing electrode 3mtr length / 50 mm dia earthing electrode 2mtr length /50 mm dia earthing electrode 3mtr length & backfill compound chemical 4 bag(per bag 25 KG)
5
-
-
... More
GI wire 10 SWG
4
-
-
... More
Silent type DG set of capacity 100 KVA with AMF pannel IS/IEC600341 IS:1460 IS:13018 …. Do…….
1
-
-
... More
Supplying all materials, labours and tools and equipment for drilling 200 X 165mm dia. X 125 Mtr. bore well in all kinds of soil and rock in urban area for installation of pumps set with Hydraulic DTH Rig Machine, all complete including drilling rig, Air Compressor and equipments, as well as fuel, lubricants and cost of transporation of rig machine and over vehicles up to the site etc. all complete job as per specification and direction of E/Ic.
I - From 0.00 M to 50.00 M below G.L.
50
-
-
... More
II - Beyond - 51.00 M to 225.00 M below G.L.
175
-
-
... More
Supplying all tools, tackles & lowering of 200mm dia. MS ERW casing pipe of 6 mm wall thickness including welding charges, cost of pipe etc including all taxes, VAT, Excise duty, freight charges with inspection charges etc as applicable, etc. all complete job as per specification and direction of E/I.
18
-
-
... More
Cleaning flushing and developing of drilled hole for testing the discharge of water development of bore well by continuous flow of water by using heavy compressor up to satisfaction of E/I. to get uninterrupted flow of water free from sand and soil etc.
2
-
-
... More
Supplying all materials, labours, tools & equipments for fiting & fixing 200mm dia MS cap over casing pipe etc. all completes job.
1
-
-
... More
Supplying of 150mm dia 03.00 H.P. (ISI Mark) KSB/Kirlosker/CRI/V-guard Submersible Motor Pump sets comfirming to IS 8034 and motor confirming to IS 9283. Pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller. Motor suitable for working on 415V + 10%, 3PH, 50Hz, A.C. supply with cable guard, thrust carbon/fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. The pump set shall be suitable for direct coupling. Pump shall have suitable outlet as per manufacturers design. Anti thrust stream lined non returned valve shall be provided with pump. 3 meter submersible copper in single/double run shall be provided with each pump.(up to 20 stages) Supply rate should be increased by Rs 200/- per stage for pump with more than 20 stages.
1
-
-
... More
Supplying of 4.0 sqr. mm. cable ISI Marked for above requirement.
150
-
-
... More
Supplying of 32 mm Submersible Pipe of standard make Ashirwad/Raksha/Prince/Gupta or any equivalent make for above requirement.
125
-
-
... More
Supplying of 02 Nos. clamp, Band, Adopter, Bore Cover etc. as required for above work.
1
-
-
... More
Supplying & fixing Electric Meter (L&T or Equivalent) 03 Phase Main Switch of ISI Mark as per direction of E/I.
1
-
-
... More
Intenel wiring and Lighting arrangement in Pump House.
1
-
-
... More
Supplying & Providing Rope of required size & tape.
1
-
-
... More
Supplying & Fixing of BCH Make or Equivalent Panel Board with all accessories & Iron Box with Angle Stand and its fixing as per direction of E/I.
1
-
-
... More
Supplying & Fixing of Wooden box of Required Size for Panel Board. Electric Meter, Main Switch etc.
1
-
-
... More
Installation Charges for Lowering of Motor Pump.
1
-
-
... More
Supplying and of 10.0 sq.mm Alluminium cable ISI mark as per specification and direction of E/I. (for connection from main line to electric Meter.
30
-
-
... More
03 Phase Electric connection charge payable to JSEB, Ranchi.
1
-
-
... More
Construction of Brick masonary chamber with RCC Slab as per E/I. (Annexure-K)
1
-
-
... More
Supplying Fittings & Fixings PVC water storage Tank of Approved Quality with all fittings.
Supplying all materials, labours, tools and equipment for laying PVC Schedule 80 pipe water flow, supreme or any ISI approved make in trenches with red lead and yarn with socket and screw joints and cutting pipe to size and threading ends where necessary etc. all complete as per specification and direction of E/I. (a) 50mm dia PVC Sch.-80 Pipe
30
-
-
... More
(b) 40mm dia PVC Sch.-80 Pipe
20
-
-
... More
(c) 32mm dia PVC Sch.- 80 Pipe
50
-
-
... More
(d) 25mm dia PVC Sch.-80 Pipe
50
-
-
... More
Supplying and fixing G.I. /PVC fittings of approved make all complete as per specification and direction of E/I.
(a) Elbow : 50mm dia
6
-
-
... More
(b) Elbow : 40mm dia
6
-
-
... More
(c) Elbow : 32mm dia
6
-
-
... More
(d) Elbow : 25mm dia
6
-
-
... More
(e)Tee plain 50mm dia
6
-
-
... More
(f)Tee plain 40mm dia
4
-
-
... More
(g)Tee plain 32 mm dia
4
-
-
... More
(h)Tee plain 25 mm dia
4
-
-
... More
(i)Socket Plain 50 mm dia
4
-
-
... More
(j) Socket Plain 40 mm dia
4
-
-
... More
(k)Socket Plain 32 mm dia
4
-
-
... More
(l) Socket Plain 25mm dia
4
-
-
... More
(m) Union Socket 50 mm dia
4
-
-
... More
(n)Union Socket 40 mm dia
4
-
-
... More
(o)Union Socket 32 mm dia
4
-
-
... More
(p) Union Socket 25 mm dia
4
-
-
... More
Providing & fixing male ended 15 mm dia UPVC bib cock of approved quality as per specification and direction of E/I
10
-
-
... More
Supplying and fitting UPVC valve of approved quality as per specification and direction of E/I. 50mm dia F/W Valve
6
-
-
... More
Providing all materials, labour, tools and equipment for fixing HDPE water storage tank double layer of approved make conforming to ISI-12701-1995 fixing on the staged pillar or on the roof of the building including cutting 4 Nos. hole in tank for rising over flow delivery and wash out including supplying full thread nipple with jam nut and fixing connection etc. and supplying and fixing brass ball cock of required size as per specification and direction of E/I (ISI marked double layer sintax, Himgiri or Gangotri or Equivalent make) 1000/2000liters capacity @ Rs. 06.20 Per Litre.
2
-
-
... More
Supplying Tools & Cutting Road as well as restoring the same specification & direction of E/I.
30m X 0.4m = 12.0m2
12
-
-
... More
Supplying all materials, tools and equipment for making brick masonry platform about 75mm high and diameter of the tank including PCC(1:2:4) 25 mm thick over it and cement plaster (1:4)with punning with 5% cico on the roof of the building all complete as per specification and direction of E/I.
2
-
-
... More
Earthwork in back filling in trenches after laying different type and size of pipe with earth removed during excavation within initial lead and left as per specification and direction of E/I. (For classification of soil item A & B)
15
-
-
... More
Supply of 16 mtr. High Mast in two section Construction S355 grade as per BS-EN 10025 Top Dia 150mm, bottom dia 360mm, plate thickness 3mm, 20 side polygon galvanisation as per BS-EN ISO 1461, base plate dia 520mm, base plate thickness 25mm, GI single spike lighting protection, maximum wind speed 47 m/s with 6 nos. foundation bolt of PCD 445mm TS 600/24mm dia/850 mm long. Luminaires carriage:Material for 40 NB ERW Class B- M.S. Pipe, dia of carriage ring 450mm (ID) with 8/12 arm, welded, 2 sections having carrying capacity upto 8/12 luminaries. Trailing cable : 5 core 2.5 sqmm. PVC flexible copper conductor winch / Power Tool : Double drum, SWL 350 kg with 1 HP 6 pole single speed intergal motor Rope: Grade AISI 304, 7/19 construction, dia 5mm, BLC 1450 x 2 having 2 nos. of continues rope, Aviation obstruction light: twin dome aviation obstruction lights LED type as required. Feeder piller: control panel housing 63A TPN MCB incomer, single dial timer, 45A contactor circuit for the automatic control of luminaries power tool control with 2 no. 9A contactors and raise lower push button, incommer 35sqmm. and outgoing 16 & 2.5 sqmm. terminals.
2
-
-
... More
For 16 mtr. High mast: ITC of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring material like PVC insulated PVC sheathed flexible cable of suitable copper conductor lugs. MCB and all labour & construction of shallow foundation with M25 grade concrete for the high mast considering safe soil bearing capacity of 10T/mtrs sq. for 16 M High Mast
2
-
-
... More
LED FLOOD Light 240 W
24
-
-
... More
Supply of 4C x 16 sqmm Aluminum Armored XLPE Cable
300
-
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable 1.1 KV grade of size not exceeding 35 sqmm direct in ground including excavation sand Cushing protective covering and refilling the trench etc. as required
300
-
-
... More
Earthing with GI earth pipe 4.5 mtr. Long, 40mm dia including accessories, and providing masonary enclouser with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required
2
-
-
... More
Supplying and laying 6 SWG GI wire at 0.5 m below ground level for conductor earth electrode, including soldering etc. as required
40
-
-
... More
Supply and installation of 2 brush fully automatic bus washing system including transportation charges.
2
-
-
... More
Add 18% GST (In Basic Rate must fill 18)
18
-
-
... More
Add 1% Labour Cess (In Basic must Rate fill 1)
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%