Rural Works Department Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Rural Works Department - RWD Tender
Civil And Construction
Road Construction
Eprocure
Opening Date7 Feb 2024
Closing Date15 Feb 2024
Tender Amount₹ 12,68,08,400
Costs
EMD
₹ 25,36,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RWD_82432_1Bid Award Id
ViewTender No
JH-M-SRK-04-2023-24Tender Authority
Rural Works Department ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000
metres. By Mechanaical Means using Hydraulic excavator. S.O.R. Item No. 3.15(i)
4516.65
21679
4.8
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
389.26
933542
2398.25
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
2372.14
6426696
2709.24
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
15206.06
1239141
81.49
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)
S.O.R. Item No. 5.02 (i)
30412.11
393532
12.94
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
760.3
6556447
8623.5
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
380.15
4219786
11100.32
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
700.91
4528165
6460.41
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
5
8704
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
20
10858
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.62
22200
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
802.96
469169
584.3
... More
Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.
S.O.R. Item No. 3.13 (i) B
816.2
45543
55.8
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
S.O.R. Item No. 16.09
37.65
90911
2414.66
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15
S.O.R. Item No. 12.08 A
122.15
588907
4821.18
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications.
Random Rubble masonry (coursed/uncoursed)
S.O.R. Item No. 12.07 (B)
330.95
1535720
4640.34
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications, Random Rubble Masonry (Coursed/uncoursed)
S.O.R. Item No. 13.04 A
215.75
991740
4596.71
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)
S.O.R. Item No. 12.07 (A)
166.25
790813
4756.77
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)
S.O.R. Item No. 13.04 B
87.06
426717
4901.42
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15
S.O.R. Item No. 13.05 A (p)
10.4
50054
4812.98
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. PCC Grade M20
S.O.R. Item No. 13.05 B (p)
18.15
95675
5271.37
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications, RCC Grade M25
S.O.R. Item No.13.05 F (p)
14.18
81610
5755.29
... More
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
S.O.R. Item No. 14.04
5.06
60988
12053.09
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
S.O.R No. 13.06
2.4
212252
88438.64
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
S.O.R. Item No. 13.03
207.08
23462
113.3
... More
Pointing with cement mortar (1:3) on brick work in substrucutre as per technical specifications.
S.O.R. Item No. 13.2
340
20515
60.34
... More
Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications.
S.O.R. Item No. 13.08
225
24862
110.5
... More
Back filling behind abutment, wing wall, return wall with Sandy material complete as per drawing and technical specifications. S.O.R. Item No. 13.09 (B)
64.85
75266
1160.63
... More
(ii) Strengthening of road from Situ to Hadtaldih (Length: 3.800 K.M.)
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.
S.O.R. Item No. 2.02
0.59
11658
19760.3
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
1736.8
228041
131.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000
metres. By Mechanaical Means using Hydraulic excavator. S.O.R. Item No. 3.15(i)
2230.79
10707
4.8
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
327.83
913970
2787.94
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
1159.72
3616389
3118.33
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
7434.11
606177
81.54
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)
S.O.R. Item No. 5.02 (i)
14868.21
192692
12.96
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
371.71
3356652
9030.3
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
185.85
2141629
11523.43
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
1058.83
7076224
6683.06
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
4
6963
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
15
8143
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.08
14800
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
392.56
229372
584.3
... More
Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.
S.O.R. Item No. 3.13 (i) B
214.28
11956
55.8
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
S.O.R. Item No. 16.09
15.06
41697
2768.77
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15
S.O.R. Item No. 12.08 A
33.76
170226
5042.26
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications.
Random Rubble masonry (coursed/uncoursed)
S.O.R. Item No. 12.07 (B)
54.33
269976
4969.66
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications, Random Rubble Masonry (Coursed/uncoursed)
S.O.R. Item No. 13.04 A
30.48
149155
4894.37
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)
S.O.R. Item No. 12.07 (A)
66.5
338323
5087.57
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)
S.O.R. Item No. 13.04 B
36.36
190264
5232.81
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15
S.O.R. Item No. 13.05 A (p)
3.07
15454
5034.06
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. PCC Grade M20
S.O.R. Item No. 13.05 B (p)
7.02
38620
5501.45
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications, RCC Grade M25
S.O.R. Item No.13.05 F (p)
5.04
30180
5988.19
... More
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
S.O.R. Item No. 14.04
1.8
22142
12301.42
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
S.O.R No. 13.06
0.88
78006
88643.7
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
S.O.R. Item No. 13.03
94.64
10539
111.36
... More
Pointing with cement mortar (1:3) on brick work in substrucutre as per technical specifications.
S.O.R. Item No. 13.2
53
3176
59.94
... More
Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications.
S.O.R. Item No. 13.08
66.5
7348
110.5
... More
Back filling behind abutment, wing wall, return wall with Sandy material complete as per drawing and technical specifications. S.O.R. Item No. 13.09 (B)
25.94
30570
1178.49
... More
(iii) Strengthening of road from (iii) Strengthening of road from Jharua to Choga(Length: 2.600K.M.)
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.
S.O.R. Item No. 2.02
0.42
8299
19760.3
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
1016.34
133445
131.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000
metres. By Mechanaical Means using Hydraulic excavator. S.O.R. Item No. 3.15(i)
1322.87
6349
4.8
... More
Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and tranporting to the embankment location within all lifts and lead upto 1000 m
S.O.R. Item No. 3.06
80.8
5041
62.4
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
214.11
583749
2726.4
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
824.24
2517014
3053.74
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
5283.56
430715
81.52
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)
S.O.R. Item No. 5.02 (i)
10567.13
136844
12.95
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
264.18
2368183
8964.28
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
132.09
1512903
11453.58
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.
RCD S.O.R. Item No. 6.01
14
52289
3734.93
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
339.63
2247134
6616.42
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
3
5222
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
10
5429
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.62
22200
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
279
163019
584.3
... More
Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.
S.O.R. Item No. 3.13 (i) B
65.8
3671
55.8
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
S.O.R. Item No. 16.09
7.53
20427
2712.85
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15
S.O.R. Item No. 12.08 A
9.99
49713
4976.34
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)
S.O.R. Item No. 12.07 (A)
33.25
166711
5013.88
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)
S.O.R. Item No. 13.04 B
19.94
102870
5159.02
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15
S.O.R. Item No. 13.05 A (p)
1.1
5464
4968.14
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. PCC Grade M20
S.O.R. Item No. 13.05 B (p)
3.51
19072
5433.7
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications, RCC Grade M25
S.O.R. Item No.13.05 F (p)
2.52
14917
5919.61
... More
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
S.O.R. Item No. 14.04
0.9
11006
12229.89
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
S.O.R No. 13.06
0.44
38986
88604.64
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
S.O.R. Item No. 13.03
61.24
6775
110.64
... More
Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications.
S.O.R. Item No. 13.08
20
2210
110.5
... More
Back filling behind abutment, wing wall, return wall with Sandy material complete as per drawing and technical specifications. S.O.R. Item No. 13.09 (B)
12.97
15285
1178.49
... More
(iv) Strengthening of road Kumardih to Bada Chunchuria(Length: 2.950 K.M.)
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.
0.69
13634
19760.3
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
1578
207191
131.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000
metres. By Mechanaical Means using Hydraulic excavator. S.O.R. Item No. 3.15(i)
2247.87
10789
4.8
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
153.44
418338
2726.4
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
1353.05
4131862
3053.74
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
8673.38
706273
81.43
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)
S.O.R. Item No. 5.02 (i)
17346.75
224120
12.92
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
433.67
3883618
8955.24
... More
Providing and laying semi dense bituminous concrete with 100-120
TPH batch type HMP producing an average output of 75 tonnes per
hour using crushed aggregates of specified grading, premixed with
bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the
hot mix to work site, laying with a hydrostatic paver finisher with sensor
control to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired
compaction as per MoRTH specification clause No. 508 complete in all
respects.
Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
216.83
2479921
11437.17
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
386.33
2543372
6583.42
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced
cement concrete M15grade kilometre stone of standard design as per
IRC:8-1980, fixing in position including painting and printing etc)
S.O.R. Item No. 8.14 (ii)
3
5222
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
12
6514
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.62
22200
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
458
267609
584.3
... More
( v) Strengthening of road from Tikar Silli Road to Bangal Border via Raghunathpur (Length: 3.90 K.M.)
-
-
-
... More
, Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.
0.6
11856
19760.3
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
1761
231219
131.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000 metres.
S.O.R. Item No. 3.15 (i)
5663.79
27186
4.8
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
129.28
355121
2746.92
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 A
1163.97
3579522
3075.27
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
7461.38
607729
81.45
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)
S.O.R. Item No. 5.02 (i)
14922.75
192951
12.93
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
373.07
3349575
8978.41
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
186.53
2138488
11464.58
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
159.08
1056256
6639.78
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
4
6963
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
16
8686
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.08
14800
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
394
230214
584.3
... More
( vi) Strengthening of road from Situ Baralapang road to Sapada(Length: 3.20 K.M.),
-
-
-
... More
Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.
S.O.R. Item No. 2.02
0.73
14425
19760.3
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
1695.26
222587
131.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000
metres. By Mechanaical Means using Hydraulic excavator. S.O.R. Item No. 3.15(i)
1655.99
7948
4.8
... More
Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and tranporting to the embankment location within all lifts and lead upto 1000 m
S.O.R. Item No. 3.06
1595.82
99579
62.4
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
689.52
1780919
2582.84
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
1775.9
5155473
2903.02
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
9079.02
738487
81.34
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)
S.O.R. Item No. 5.02 (i)
18158.03
234238
12.9
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
453.95
3993815
8797.92
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
226.98
2558836
11273.4
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.
RCD S.O.R. Item No. 6.01
27.3
100676
3687.78
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
486.7
3192703
6559.9
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
4
6963
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
12
6514
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.08
14800
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
479.42
280125
584.3
... More
Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.
S.O.R. Item No. 3.13 (i) B
65.8
3671
55.8
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
S.O.R. Item No. 16.09
7.53
19445
2582.4
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15
S.O.R. Item No. 12.08 A
9.99
49135
4918.46
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)
S.O.R. Item No. 12.07 (A)
33.25
163174
4907.5
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)
S.O.R. Item No. 13.04 B
17.58
88821
5052.43
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15
S.O.R. Item No. 13.05 A (p)
0.61
2995
4910.26
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. PCC Grade M20
S.O.R. Item No. 13.05 B (p)
3.81
20475
5374.23
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications, RCC Grade M25
S.O.R. Item No.13.05 F (p)
3.31
19398
5860.64
... More
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
S.O.R. Item No. 14.04
1.18
14357
12167.25
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
S.O.R No. 13.06
0.54
47820
88555.82
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
S.O.R. Item No. 13.03
43
4820
112.1
... More
Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications.
S.O.R. Item No. 13.08
20
2210
110.5
... More
Back filling behind abutment, wing wall, return wall with Sandy material complete as per drawing and technical specifications. S.O.R. Item No. 13.09 (B)
12.97
15053
1160.63
... More
Goods & Service Tax (G.S.T.) -
106400700.71
19152126
0.18
... More
Labour Cess -
125552826.84
1255528
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements