Rural Works Department Tender
... More
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Rural Works Department - RWD Tender
Civil And Construction
Road Construction
Eprocure
Opening Date19 Feb 2024
Closing Date26 Feb 2024
Tender Amount₹ 13,66,71,300
Costs
EMD
₹ 27,33,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RWD_83430_1Bid Award Id
ViewTender No
JH-M-SRK-01-2023-24Tender Authority
Rural Works Department ViewPurchaser Address
-Website
http://jharkhandtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and tranporting to the embankment location within all lifts and lead upto 1000 m
S.O.R. Item No. 3.06
1037.66
64749
62.4
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
7533.8
989187
131.3
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
1406.56
3229039
2295.7
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
4292.3
11166761
2601.58
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
28615.32
2327570
81.34
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)
S.O.R. Item No. 5.02 (i)
57230.64
738275
12.9
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
1430.77
12164506
8502.07
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
715.38
7847074
10969.1
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.
RCD S.O.R. Item No. 6.01
29.69
107800
3630.87
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
1390.24
9009450
6480.5
... More
5th kilometre stone (precast) Kilo Metre Stone (Reinforced cement
concrete M15grade kilometre stone of standard design as per IRC:8-
1980, fixing in position including painting and printing etc)
S.O.R. Item No. 8.14 (i)
2
5858
2929.3
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
8
13927
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
39
21173
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.08
14800
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
1511.04
882900
584.3
... More
Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.
S.O.R. Item No. 3.13 (i) B
1689.7
94285
55.8
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
S.O.R. Item No. 16.09
102.6
238182
2321.47
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15
S.O.R. Item No. 12.08 A
522.56
2528014
4837.75
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)
S.O.R. Item No. 12.07 (A)
440.69
2080061
4720.01
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)
S.O.R. Item No. 13.04 B
252.19
1226780
4864.51
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15
S.O.R. Item No. 13.05 A (p)
20.16
97363
4829.55
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications.
Random Rubble masonry (coursed/uncoursed)
S.O.R. Item No. 12.07 (B)
303
1395527
4605.7
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications, Random Rubble Masonry (Coursed/uncoursed)
S.O.R. Item No. 13.04 A
190.88
873014
4573.75
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical speciofications
(P.C.C. Grade M-20 in S/S)
S.O.R. Item No. 13.05 B (p)
44.16
233566
5289.1
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications, RCC Grade M25
S.O.R. Item No.13.05 F (p)
51.58
297894
5775.38
... More
Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications
S.O.R. Item No. 14.04
13.05
157580
12075.16
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
S.O.R No. 13.06
8.13
719006
88438.64
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
S.O.R. Item No. 13.03
3574.93
415514
116.23
... More
Pointing with cement mortar (1:3) on brick work in substrucutre as per technical specifications.
S.O.R. Item No. 13.2
307.5
18742
60.95
... More
Providing weep holes in Brick masonry/ Plain/Reinforced concrete abutment , wing wall/ returen wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V:20 H towards drawing face. Complete as per drawing and technical specifications.
S.O.R. Item No. 13.08
372
41768
112.28
... More
Back filling behind abutment, wing wall, return wall complete as per drawing and technical specifications. Sandy material
S.O.R. Item No. 13.09 (B)
164.19
178837
1089.21
... More
ii) Strengthening of road from Rupru to Sirum (Length: 2.065 K.M.),Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.
S.O.R. Item No. 2.02
0.29
5730
19760.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000
metres. By Mechanaical Means using Hydraulic excavator. S.O.R. Item No. 3.15(i)
1613.25
7743
4.8
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
940.8
123527
131.3
... More
Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and tranporting to the embankment location within all lifts and lead upto 1000 m
S.O.R. Item No. 3.06
297.68
18575
62.4
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
340.81
936177
2746.92
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
564.85
1737066
3075.27
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
3620.85
294447
81.32
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.)
S.O.R. Item No. 5.02 (i)
7241.7
93345
12.89
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
181.04
1622806
8963.8
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
90.52
1035585
11440.4
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.
RCD S.O.R. Item No. 6.01
15.05
57659
3831.19
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
695.39
4664022
6707.06
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
3
5222
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
7
3800
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.62
22200
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
191.2
111718
584.3
... More
iii) Strengthening of road from Latemda to Jargo. (Length: 2.800 K.M.),Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area. S.O.R. Item No. 2.02
0.73
14425
19760.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and
disposal of scarified material within all the lifts and leads upto 1000
metres. By Mechanaical Means using Hydraulic excavator.
S.O.R. Item No. 3.15 (i)
4574.06
21955
4.8
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
1571.4
206324
131.3
... More
Construction of granular sub-base by providing close graded material,
spreading in uniform layers with motor grader on prepared surface,
mixing by mix in place method with front end loader at OMC, and
compacting with vibratory roller to achieve the desired density,
complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
211.44
588226
2782
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
1441.38
4485689
3112.08
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with
SS1 grade bitumen emulsion on prepared surface of granular Base
including clearing of road surface and spraying primer at the rate of
0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
9239.61
752011
81.39
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat
with bitumen emulsion using emulsion pressure distributor at the rate of
0.20 kg per sqm on the prepared bituminous/granular surface cleaned
with mechanical broom.)
S.O.R. Item No. 5.02 (i)
18479.21
238566
12.91
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed
Bitumen (19mm nominal size) (Providing and laying bituminous
macadam with higher capacity hot mix plant using crushed aggregates
of specified grading premixed with bituminous binder, transported to
site, laid over a previously prepared surface with paver finisher to the
required grade, level and alignment and rolled as per clauses 501.6 and
501.7 to achieve the desired compaction.)
Bituminous Macadam for Grading II: (19 mm nominal size)
S.O.R. Item No. 5.03 (ii)
461.98
4161284
9007.5
... More
Providing and laying semi dense bituminous concrete with 100-120
TPH batch type HMP producing an average output of 75 tonnes per
hour using crushed aggregates of specified grading, premixed with
bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the
hot mix to work site, laying with a hydrostatic paver finisher with sensor
control to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired
compaction as per MoRTH specification clause No. 508 complete in all
respects.
Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
230.99
2653379
11486.99
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
203.96
1361779
6676.7
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced
cement concrete M15grade kilometre stone of standard design as per
IRC:8-1980, fixing in position including painting and printing etc)
S.O.R. Item No. 8.14 (ii)
3
5222
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
11
5971
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.08
14800
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
487.9
285079
584.3
... More
Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.
S.O.R. Item No. 3.13 (i) B
10.8
602
55.8
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
S.O.R. Item No. 16.09
1.35
3730
2763.36
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15
S.O.R. Item No. 12.08 A
1.8
9078
5043.51
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)
S.O.R. Item No. 12.07 (A)
4.59
23361
5089.68
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)
S.O.R. Item No. 13.04 B
0.61
3193
5234.91
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15
S.O.R. Item No. 13.05 A (p)
0.81
4078
5035.31
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications, RCC Grade M25
S.O.R. Item No.13.05 F (p)
1.8
10757
5976.45
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
S.O.R No. 13.06
0.26
23019
88536.29
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
S.O.R. Item No. 13.03
14.7
1642
111.73
... More
iv) Strengthening of road from Dere to Railway Line. (Length: 1.560 K.M.),Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area. S.O.R. Item No. 2.02
0.16
3161
19760.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000
metres. By Mechanaical Means using Hydraulic excavator. S.O.R. Item No. 3.15(i)
901.92
4329
4.8
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
639.5
83966
131.3
... More
Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with disposal upto 1000 metres. Excavation for road work in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and tranporting to the embankment location within all lifts and lead upto 1000 m
S.O.R. Item No. 3.06
125.24
7814
62.4
... More
Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 S.O.R. Item No. 3.15 (i)
97.65
5136
52.6
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
266.03
718265
2699.94
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
319.06
965462
3025.96
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with
SS1 grade bitumen emulsion on prepared surface of granular Base
including clearing of road surface and spraying primer at the rate of
0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
2045.25
166360
81.34
... More
Tack Coat on Bituminous surfaces (Providing and applying tack coat
with bitumen emulsion using emulsion pressure distributor at the rate of
0.20 kg per sqm on the prepared bituminous/granular surface cleaned
with mechanical broom.)
S.O.R. Item No. 5.02 (i)
4090.5
52767
12.9
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed
Bitumen (19mm nominal size) (Providing and laying bituminous
macadam with higher capacity hot mix plant using crushed aggregates
of specified grading premixed with bituminous binder, transported to
site, laid over a previously prepared surface with paver finisher to the
required grade, level and alignment and rolled as per clauses 501.6 and
501.7 to achieve the desired compaction.)
Bituminous Macadam for Grading II: (19 mm nominal size)
S.O.R. Item No. 5.03 (ii)
102.26
911914
8917.61
... More
Providing and laying semi dense bituminous concrete with 100-120
TPH batch type HMP producing an average output of 75 tonnes per
hour using crushed aggregates of specified grading, premixed with
bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the
hot mix to work site, laying with a hydrostatic paver finisher with sensor
control to the required grade, level and alignment, rolling with smooth
wheeled, vibratory and tandem rollers to achieve the desired
compaction as per MoRTH specification clause No. 508 complete in all
respects.
Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
51.13
582783
11398.08
... More
Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing.
RCD S.O.R. Item No. 6.01
21.7
81260
3744.72
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
597.48
3964632
6635.59
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
2
3481
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
6
3257
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.62
22200
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
108
63104
584.3
... More
Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.
S.O.R. Item No. 3.13 (i) B
32.4
1807
55.8
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
S.O.R. Item No. 16.09
4.05
10889
2688.8
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15
S.O.R. Item No. 12.08 A
5.4
26951
4991.05
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)
S.O.R. Item No. 12.07 (A)
13.77
68985
5009.84
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)
S.O.R. Item No. 13.04 B
1.83
9433
5154.94
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15
S.O.R. Item No. 13.05 A (p)
2.43
12108
4982.85
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications, RCC Grade M25
S.O.R. Item No.13.05 F (p)
5.4
32082
5941.2
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
S.O.R No. 13.06
0.78
69149
88653.47
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
S.O.R. Item No. 13.03
44.1
4923
111.65
... More
v)Strengthening of road from Chhattardih to Jargo more via Mahadevbera(: 4.500K.M.), Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area. S.O.R. Item No. 2.02
0.75
14820
19760.3
... More
Scarifying the existing bituminous surface to a depth of 50 mm and disposal of scarified material within all the lifts and leads upto 1000 metres.
S.O.R. Item No. 3.15 (i)
4706.25
22590
4.8
... More
Construction of sub-grade and earthen shoulders with approved material obtained from Borrow pits with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300-2.
S.O.R. Item No. 3.18
2102.5
276058
131.3
... More
Loosening, Levelling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in Tables 300.1 and 300.2 for embankment construction as per Technical Specification Clause 301.4.1 S.O.R. Item No. 3.15 (i)
84.6
4449
52.6
... More
Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401.
(By Mix in Place Method) With Grading-I Material
S.O.R. Item No. 4.01 B. (i)
436.03
1170906
2685.38
... More
Wet Mix Macadam (Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with grader in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
S.O.R. Item No. 4.14 B
1483.03
4464913
3010.67
... More
Prime Coat over WMM/WBM (Providing and applying primer coat with SS1 grade bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means).
S.O.R. Item No. 5.01 A (i)
9506.63
773174
81.33
... More
Tack Coat on Granular surfaces treated with primer. Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 kg per sqm On the On the prepared granular surface cleaned with mechanical broom. S.O.R. Item No. 5.02 (ii)
19013.25
245080
12.89
... More
Bituminous Macadam Grading-II with VG-30 Grade Packed Bitumen (19mm nominal size) (Providing and laying bituminous macadam with higher capacity hot mix plant using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.) Bituminous Macadam for Grading II: (19 mm nominal size) S.O.R. Item No. 5.03 (ii)
475.33
4231359
8901.94
... More
Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects. Semi-Dense Bituminous Concrete, Grading-II (10 mm size)
S.O.R. Item No. 5.7 (ii) 5.7(MORT&H 4th)
237.67
2704159
11377.79
... More
Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days) S.O.R. Item No. 6.4
1129.63
7523719
6660.34
... More
Ordinary Kilometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (ii)
5
8704
1740.9
... More
Hectometer stone (Precast) Kilo Metre Stone (Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc) S.O.R. Item No. 8.14 (iii)
18
9772
542.9
... More
Direction and Place Identification Signs upto 0.9 sqm Size Board.(Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area not exceeding 0.9 sqm fixed over back support frame of min 35 x 35 x 3 mm Angle mounted on a mild steel circular pipe 65 NB, firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 x 45 x 60 cm, 60 cm below ground level as per approved drawing) S.O.R. Item No. 8.05
1.62
22200
13704.3
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.
S.O.R. Item No. 8.13 B
502
293318
584.3
... More
Earth work in excavation of foundation in Ordinary Soil by Manual Means of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, backfilling the excavation earth to the extent required a nd utilising the remaining earth locally for road work.
S.O.R. Item No. 3.13 (i) B
10.8
602
55.8
... More
Construction of dry rubble flooring at cross drainage works for relatively less important works.
S.O.R. Item No. 16.09
1.35
3612
2675.58
... More
Plain/Reinfoced Cement concrete in open foundation complete as per drwaing and technical specifications. PCC Grade M15
S.O.R. Item No. 12.08 A
1.8
9040
5022.42
... More
Stone masonry work in cement mortar 1:3 in foundation complete as per drawing and technical specifications. Square Rubble Coursed Rubble masonry (first sort)
S.O.R. Item No. 12.07 (A)
4.59
23081
5028.61
... More
Stone masonry work in cement mortar 1:3 for substructure complete as per drawing and technical specifications. Coursed rubble masonry (first sort)
S.O.R. Item No. 13.04 B
0.61
3155
5173.7
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications. Height upto 5m. PCC Grade M15
S.O.R. Item No. 13.05 A (p)
0.81
4061
5014.22
... More
Plain/Reinforced cement concrete in sub-strucutre complete as per drawing and Technical specifications, RCC Grade M25
S.O.R. Item No.13.05 F (p)
1.8
10729
5961.09
... More
Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and technical specifications
S.O.R No. 13.06
0.26
23024
88555.82
... More
Plastering with cement mortar (1:3) on brick work in substructure as per technical specifications
S.O.R. Item No. 13.03
14.7
1664
113.22
... More
Goods & Service Tax (G.S.T.) -
114676405.62
20641753
0.18
... More
Labour Cess -
135318158.63
1353181
0.01
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements