Military Engineer Services Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 82,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_686145_1Tender No
8200/1599/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings.
100
-
-
... More
S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall and ridge,fixed with self tapping srews complete.
100
-
-
... More
Dismantling timber scantling 40 sqcm and over in section in any position in framed work complete.
0.3
-
-
... More
M&L for clean swan in second class hardwood in scantlings in timber fixed.
0.3
-
-
... More
Demolition of brick wk masonry built in cement mortar incldg all quoins arches pillars etc
5.5
-
-
... More
M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6
1.5
-
-
... More
Description all as per item No 09 above but except bricks
0.3
-
-
... More
M&L Brick work with sub class 'B' Brick straight or curved on plain to any radius in half brick thick wall built in cm 1:4
30
-
-
... More
Dismantling of wall and ceiling board any thickness/description including cover fillet.
120
-
-
... More
M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre incl 2mm dia G.I. ( upto 1200 mm length ) adjusting level to Purlins/ Rafter. .
120
-
-
... More
M&L 4mm thick non asbestos fibre cement designer building board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework fixed in ceiling flat or sloping.
120
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n’exc1.5 Sqm and removing from site.
40
-
-
... More
Taking down chowkats or frames with shutters (without taking off shutters from the frame) area exc1.5 Sqm but n.exc 4.00 Sqm each and removing from site.
20
-
-
... More
Taking down shutters of any description Area .exc 1 sqm but n exc 2 sqm each
30
-
-
... More
Dismantaling floor, hearth or wall tiling, including cement mortar bedding (but not backing ) removing serviciable tile to store & rubbish off the permisses.
426
-
-
... More
Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth.
50
-
-
... More
M&L for 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes and surface fair and even.
370
-
-
... More
M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cm x 30 cm x 25mm thick set jointed and pointed in neat cement slurry in floors complete all as specified and directed.
110
-
-
... More
M&L Non - skid Ceramic jointless tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete.
80
-
-
... More
Description all as per ser item No 22 above but as in verticle surface or skirting complete.
8
-
-
... More
M&L Non - skid Ceramic jointless tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles complete.
180
-
-
... More
Description all as per ser item No 24 above but as in verticle surface or skirting complete.
18
-
-
... More
M&L for 10mm thick screed bed or bedding layer of mortar in CM (1:4) for lying on vertical surface to receiving wall tiles and surface finished even & fair.
166
-
-
... More
M&L, glazed ceramic coloured tiles of size 300 X 200 X 7mm mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles.
20
-
-
... More
M&L, glazed ceramic coloured tiles of size 350 X 250 X 7mm/ 450 x 350 x 7 mm thick as in walls etc set and jointed in neat cement slurry and pointed in colour cement to match the tiles.
120
-
-
... More
Demolition of stone slabs and tiles of any description or thickness in floors, aprons
0.3
-
-
... More
M&L 20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required.
3
-
-
... More
Cutting holes in brickwalls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required not exc. half brick
180
-
-
... More
S&F Flat iron / angle iron for hold fast to fixed door/window.
18
-
-
... More
M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed
52
-
-
... More
M&L Pressed steel frames 105 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed
52
-
-
... More
S&F factory made 35mm thick 2nd class hard wood, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.
18
-
-
... More
S&F 2nd class hard wood 35 mm thick glazed & skelton shutter (any no of pannel) open rebated and prepared to receive glass gauge etc with sush bar edges to framing plain chamfered or receive glass gauge etc with sash bar edge of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24 (a).
24
-
-
... More
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and shown on drg in SSR Part-II 2020.
94
-
-
... More
S&F, factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rails, lock rail and bottom rail on either side & as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together with solvent cement, in the frame at site as per specification and shown on drawing.
24.7
-
-
... More
All as per above item No 38, but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be strectched to firmly.
23.4
-
-
... More
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (style), with particle board core and 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
23.4
-
-
... More
M&L 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides covered with decorative face veneer with lipping / frame to match.
17.5
-
-
... More
M&L Providing, cement concrete type B0 1:2:4 (12.5 mm graded aggreate) in filling of pressed steel frame , coping, fixing of MS railing work, fixing of hold fast etc similar work.
0.7
-
-
... More
S & F 100 mm Butt hinges medium weight medium cold rolled mild steel.
270
-
-
... More
S & F 100 mm Butt hinges extrucded aluminium alloy with galvanised mild stel hinge pin, anodised and fixed, type C-21.
60
-
-
... More
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete.
120
-
-
... More
S&F of 150 mm size aluminium handles cast type anodised.
140
-
-
... More
S&F 250mm long Aluminium alloy, anodised, sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extructed section or cast aluminium alloy and fixed.
20
-
-
... More
M/L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flate iron 25x 3mm handle in each leaf.
16
-
-
... More
M/L Steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dove tailed or welded (including two nos tower bolts 125mm in each leaf and one nos MS flat iron 25x 3mm handle in each leaf.
16
-
-
... More
S & F as in repairs Steel ventilator with top hung shutter including hinges steel peg stay, complete.
2
-
-
... More
M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165
145
-
-
... More
S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door.
31
-
-
... More
S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples over steel windows and gauzed door.
20
-
-
... More
Hacking out old broken glass any thickness, size, quality or description, from metal/wooden frame including punching or drilling out old glazing pins and removal of demolished material from site.
2
-
-
... More
S & F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane .
16
-
-
... More
Description all as per ser item No 55 above but 4 mm thick figured glass pin headed type complete.
1
-
-
... More
Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level).
6
-
-
... More
M&L for 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete.
50
-
-
... More
M&L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring and finised the concrete surfaces even and smooth using extra cement
50
-
-
... More
S&F Glass dividing strips, 3 mm thick and 38 mm wide inserted in position
50
-
-
... More
M&L for PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.
0.3
-
-
... More
M&L for extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc.
60
-
-
... More
M&L Providing, cement concrete type B1 1:3:6 (20 mm graded aggreate) as in coping etc similar work complete.
0.75
-
-
... More
Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site.
80
-
-
... More
Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
80
-
-
... More
Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site .
60
-
-
... More
Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
60
-
-
... More
20mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,.
18
-
-
... More
20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,.
18
-
-
... More
Dismantling of boarding any description, fixed in any position with screws all as specified.
8
-
-
... More
S&F prelaminated particle board 18-19 mm thick interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination to timber frame work in Cupboard all as specified and directed.
8
-
-
... More
Dismantling water tanks Capacity in exc. 250 & n exc. 500 litres.
5
-
-
... More
Dismantling water tanks Capacity in exc. 500 & n exc. 1000 litres.
4
-
-
... More
S & F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I 2009.
5
-
-
... More
S & F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I 2009.
4
-
-
... More
S&F PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe.
9
-
-
... More
S&F in repair PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe.
10
-
-
... More
S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.
10
-
-
... More
S&F in repair PVC (SWR) pipes 75mm single socketed in any length with rubberring joints, laid in trenches or in floors
30
-
-
... More
S&F in repair PVC (SWR) pipes 110 mm single socketed in any length with rubberring joints, laid in trenches or in floors
30
-
-
... More
S&F in repair PVC bends any radius 75 mm dia
10
-
-
... More
S&F in repair PVC bends any radius 100 mm dia
10
-
-
... More
S & F in repair vitreous china wash hand basin,counter sunk white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing.
12
-
-
... More
S&F in repair vitreous china squating pan 'ORRISA' pattern, size 580X450mm white with integral foot rest complete including connection to trap and to antisyphonage pipe etc complete including making good to floor.
8
-
-
... More
S&F in repair vitreous china pedastal type watre closet, white (excluding flushing cistern and flush pipe) but including connection to trap, and to flushing pipe, anti-syphonage pipe etc complete and making good to floor.
8
-
-
... More
S&F in repair EWC sheet cover to match EWC complete.
2
-
-
... More
S&F in repairs Health fauset (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook incl making connections and fixed in position complete in all respect as specified.
22
-
-
... More
S&F, in repair 10 litre capacity PVC low level flushing cistern, white inlet ball valve, float and handle and connection to pipe including bracket.
20
-
-
... More
S&F in repair, 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends.
30
-
-
... More
S & F in repair, 15 mm bore bib taps, chromium plated cast copper alloy, screwed down, screwed for iron pipe or for brass ferrule.
20
-
-
... More
S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete.
30
-
-
... More
S&F in repair 15 mm bore angle/ stop valves , fancy type chromium plated with long shank and cup (conceaeld type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as spfd & directed by Engr-in-charge.
18
-
-
... More
S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT
(half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)
12
-
-
... More
Supply only of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.
12
-
-
... More
S&F in repairs of 15 mm pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'hot' or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe.
8
-
-
... More
S&F 20mm dia Aluminium powder coated as in golden colour finish draft rod complete all as specified and as approved by EIC.
18
-
-
... More
S&F brass chromium plated decorative bracket fixed to wall .
5
-
-
... More
S&F in repair Brass chromium plated tubular towel rail 20mm dia D Type, 60 cm long between flanges.
20
-
-
... More
M&L in repair 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete.
20
-
-
... More
Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc.
400
-
-
... More
M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete.
113.8
-
-
... More
M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished fair & even complete.
143.8
-
-
... More
M&L for preparation of new plasterd wall surfaces and applying two coat of oil bound distemper of approved colour and shade over one coat putty .
85.35
-
-
... More
M & L preparation of new surface of wall and applying three coats of white wash.
64.4
-
-
... More
M & L preparation of new plastered surface of wall and applying two coats of cement base paint.
107.85
-
-
... More
M&L, applying one coats of synthetic enamel paint incl preparation of old wooden surfaces of any description exc10cm width or girth not otherwise described.
100
-
-
... More
M&L, applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc10cm width or girth not otherwise described complete.
127.32
-
-
... More
M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.
29.27
-
-
... More
Supply and fix for Three Track Sliding powder coated aluminium Window of sizes of Top/Side and Bottom track section of 91.80mm x 31.75mm x 1.20mm thick and Shutter section of sizes 39.40 mm x 17.70mm x 1.20mm thick including joining cleats, beading,locking arrangement, rubber gasket for fixing etc complete with 5.5 mm thick tinted glass & stailness steel wire cloth, 0.36 mm nominal dia of wire and averaging width of aperture 1.40mm and fixed with aluminium wire staples complete .
33.75
-
-
... More
Supply and fix forAnodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazingclips, rubber packing, anodisedaluminium snap beading, screwsetc. complete all as specified.
4
-
-
... More
Taking down carefully copper/aluminium point wiring (light, fan socket or power) complete including fittings & fixtures such as switches, ceiling roses, pendents, regulators etc and making good disturbed surface of walls, floors etc complete all as specified & directed by Engineer-in-charge.
Note :- Light fittings shall be measured & paid separately.
390
-
-
... More
M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC casing caping and accessories on wall/roof/floor etc, (ISI marked) with mild steel/pressed steel sunken box (with earth dolly) duly painted with two coats of anti corrosive paint/aiuminium paint over a coat of red oxide primer internally. and two coats of black bituminous paint over a coat of red oxide primer externally,covered with 3 mm thick plastic laminated sheet cover for fixing of switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engineer-in-charge for the following.
-
-
-
... More
One light/ fan/bell point, controlled by one, one way switch.
150
-
-
... More
One socket out let 3 pin 5 Amps on the same board.
30
-
-
... More
One socket outlet of 3 pin 5 Amp on independent board.
40
-
-
... More
One bell point controlled by one 5 amp bell push
25
-
-
... More
Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black, Earth - Green) FRLS grade dwawn in and including PVC casing and caping not less than 20mm size and fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 15 amp socket outlet controlled by one switch on independent board incl 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.
35
-
-
... More
M&L for point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC concealed conduit of 20mm bore with accessories in wall/roof/floor etc, ISI marked with mild steel/prestressed steel modular sunken/concealed box (with earth dolly) duly painted two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paint over a coat of red oxide primer externally, 3mm thick plastic laminated sheet top cover for mounting switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in-charge for the following: -
-
-
-
... More
One light or fan point, controlled by one, one way switch 5 Amps.
50
-
-
... More
One socket out let 3 pin 5 Amps on the same board.
15
-
-
... More
One socket outlet of 3 pin 5 Amp on independent board.
20
-
-
... More
One bell point controlled by one 5 amp bell push
10
-
-
... More
Material and labour for point wiring alongwith earth continuity conductor with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including medium grade, PVC concealed conduit of 20mm bore with accessories in wall/roof/floor etc, and sunken galvanized pressed steel terminal boxes of thickness not less than 1.12 mm covered with 2.80 mm thick phenolic laminated white sheet cover for one 15 amp socket outlet controlled by one switch on independent board incl 1.5 Sq mm copper conductor earth wire and connected to common earth dolly on independent board.
15
-
-
... More
S&F in repair switch piano, flush type, 5 amps, 230 volts, single pole, one way (ISI marked) complete all as directed by Engineer-in-charge
180
-
-
... More
Supplying and fixing switch socket combination two in one 5 and 15 Amps multipurpose flush type universal 240Volts.
35
-
-
... More
Supplying and fixing switch socket combination two in one 5 Amps multipurpose flush type universal 240Volts.
40
-
-
... More
S&F in repair sockets outlet multipurpose 2 in 1, 3 pin, 5 Amps flush type confirming to IS all as specified and directed by Engineer-in-charge
30
-
-
... More
S&F in repair ceiling rose, PVC of size 65mmx50mm three terminals (ISI marked) all as specified and directed by Engineer-in-charge.
165
-
-
... More
S & F in repair bell push 5 amp flush type
10
-
-
... More
S & F in repair modular switch 1 way 6A, 1 module.
65
-
-
... More
S & F in repair modular switch 1 way 16A, 1 module
15
-
-
... More
S & F in repair modular socket, 6A - 3 pin combined 2 module
20
-
-
... More
S & F in repair modular modular Socket 6A/16A - 3 pin combined 2 module.
15
-
-
... More
S & F in repair modular fan regulator step type, 120W - 2 module
15
-
-
... More
M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 1 module.
10
-
-
... More
M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 2 module.
35
-
-
... More
M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 3 module.
10
-
-
... More
M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 4 module.
20
-
-
... More
M&L in repair modular white cover plate with frame ( both inner plate & outer plate cover ), 6 module.
25
-
-
... More
M&L in repair modular Modular metal flush box 1 & 2 module
10
-
-
... More
M&L in repauir modular metal flush box 3 module
10
-
-
... More
M&L in repair modular metal flush box 4 module
20
-
-
... More
M&L in repair modular metal flush box 6 module
25
-
-
... More
S&F in repair MCB single pole 6 to 32 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
210
-
-
... More
S&F in repair MCB single pole & neutral 40 Amps, 240 Volts, 10 KA rapturing capacity, 'C' Curve complete all as directed by Engineer-in-charge.
132
-
-
... More
S&F in repair sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 8 way with 200 Amps rated copper bus bar double door type complete all as directed by Engineer-in-charge.
10
-
-
... More
S&F in repair sheet metal enclosure DB's 240 Volts, IP-43, suitable for mounting MCB's, SPN, 4 way with 200 Amps rated copper bus bar double door type complete all as directed by Engineer-in-charge.
20
-
-
... More
S & F in repair bell ding dong type 230 v, 50 Hz
35
-
-
... More
S&F in repair, lamp holder, PVC/ polycarbonate type with back plate suitable for batten fittings and including LED lamp 12 watt complete all as specified and directed by Engineer-in-charge.Make : Crompton Greaves/Havells/Philips/Bajaj
60
-
-
... More
S & F in repair stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc complete all as specified & directed by Engineer-in-charge (Make :- Anchor/Havells/Legrand
40
-
-
... More
S & F in repair LED building Security light fitting 1x20watt with polycarbonate housing, Aluminum gear tray duly prewired inbuilt LED module IP 65 Protection complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of size 1.5 sq mm including GI tubing 40mm dia light grade 1.5m long band to shape for mounting of security light with 2 nos MS,FI clamp including plinth with nut bolts etc complete all as specified and directed Make: Crompton Greaves/Havells/Philips.
15
-
-
... More
Taking down existing earthing and M&L for new Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 5 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed.
NOTE :- (i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 5 of MES SSR Part-I.
(ii) Item includes the cost of 7.5M GI pipe for protection of earth wire. Any variation in length shall be adjusted through deviation order.
(iii) Item includes cost of 7.5 M earth lead wire. Any variation in length shall be adjusted through deviation order.
(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.
5
-
-
... More
S&F in repair service connection of 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathed of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core multistandard cable flat or circular of 6 Sqmm 2 core including taking down old service cable complete all as specified & directed by Engineer-in-charge.
200
-
-
... More
M & L in repair for submain wiring with approved colour code/as per IS (Red, black & green for single phase) circuit with two single core PVC insulated cable with multistranded copper coductor of nominal cross sectional area of 6.0 Sq mm (FRLS) in PVC casing & capping non metallic including one run of PVC insulated multistranded copper conductor nominal cross section area of 4 Sq mm (FRLS) of continuous earth wire green in colour complete all as specified and directed by Engineer-in-charge. (NOTE: Two runs of 6.0 sqmm cable & One run of 4 sqmm cable and One run of PVC casing & capping shall be paid as one unit length.)
130
-
-
... More
Taking down old unserviceable LT cable, supply and Laying in trenches/through pipes/ducts or on poles/walls jointing to O/H conductor, LT panels, main switch with cable size aluminum lugs and testing. XLPE insulated, armoured heavy duty electric cables with aluminum conductor, 1100 volt grade, all as specified directed by Engineer In charge of cross sectional area of 10 Sqmm 2 core
150
-
-
... More
S & F in repair box type fitting 1x 16w, blue coloured end caps, prewired for LED tube including LED tube 16 watts, including connecting up with twin core twisted flexible copper conductor cable with suitable size complete and all as specified and directed by Engineer- in Charge.”. Make: Cromton Greaves Cat part no for Fitting DMLN1LT8-16 and for LED tube LTT8-16 or Equivalent make of Havells/Philips.
225
-
-
... More
S & F in repair recessed mounting LED Square downlighter luminaire with die cast aluminium housing 15 watts incl provn of three core cable size 1.5 Sq.mm from ceiling rose to fitting with all accessories and all as specified and directed by Engineerin Charge Make- Crompton greaves Limited LSDN-15-CDL/TL/WW or Equivalent make of Havells/Philips.
10
-
-
... More
Dismantling carefully for taking down and removing old copper wire winding of ceiling fans of size 48” sweep of any make and rewinding with New super enameled copper winding wire of existing gauge as per old copper winding including providing insulation be varnishing (Golden), Cleaning, Oiling, Greasing, nut, bolt capacitor stand etc and refixing all the parts complete and Painting of ceiling fans of any size complete incl blades, with synthetic enamel paint by spraying including filling cavities with filler, one coat after celaning all dust etc. testing in E/M Store yard and fixing, hanging complete all as specified and directed by Engr-in-charge.
85
-
-
... More
Description all as per ser item No 150 here in before but Exhaust Fans of size 15”/16”/18" Sweep
10
-
-
... More
Taking down from existing position/location including disconnecting/ dismantling carefully of ceiling fans of 48” size cleaning, oiling, Greasing,nut, bolt capacitor stand etc and refixing all the parts and hanging , Painting of ceiling fans of any size complete incl blades, with synthetic enamel paint by spraying including filling cavities with filler, one coat after celaning all dust etc. testing complete all as specified & directed by EIC.
NOTE:-(i) The super enamelled winding wire is to provided shall be any one make of Devidayal/USHA/Chetak of appropriate gauge as directed by EIC. (ii) Any Un-serviceable parts required for replacement shall be measured and paid separately. (iii) Ceiling Fans/Exhaust Fans for rewinding complete repair item etc shall be done E/M yard , No Extra payment shall be made on this account.
100
-
-
... More
S&F in repair ball bearing suitable for Ceiling/Exhaust Fans of following size complete all as specified and directed by Engineer-In-Charge: -
-
-
-
... More
Ball bearing SKF/NBC/TATA – 6201
45
-
-
... More
Ball bearing SKF/NBC/TATA – 6202
45
-
-
... More
Ball bearing SKF/NBC/TATA – 6203
20
-
-
... More
Ball bearing SKF/NBC/TATA – SSV3
20
-
-
... More
Supply and fix in repair Gun Metal bushes of suitable size for any type and any sweep of ceiling Fans complete all as directed by EIC.
20
-
-
... More
Supply and fix in repair Shaft of suitable size for any type and any sweep of ceiling Fans complete all as directed by EIC.
20
-
-
... More
Supply and fix in repair Rubber reel suitable for ceiling Fans (Any type/sweep and make) complete all as specified and directed by EIC.
80
-
-
... More
Supply and fix in repair ‘U’ brackets, Nuts and bolts suitable for Rubber Reel of ceiling Fan (Any type, sweep and make) complete all as specified and directed by EIC.
65
-
-
... More
Supply and fix in repair Twin core copper flexible cable of size 1.5 Sqmm PVC insulated 1100 volts for ceiling fans.
100
-
-
... More
Supply and fix in repair capacitor 2.5 MFD paper insulated with aluminium body after removing unserviceable condenser complete all as specified and directed by EIC.
50
-
-
... More
M&L for disconnecting the electric supply, disconnecting the water pipe (Cold and hot water) from the geyser of any make and any capacity, taking down the geyser by unscrewing nuts, bolts and washer from its existing place, cleaning geysers tank body properly, removing scaling with the help of brush , cleaning material etc and re-fixing the geyser at its original place by screwing nuts, bolts & washer, connecting the water pipe (hot and cold water) and the electric supply including testing of geyser for proper working to the entire satisfaction all as specified and as directed by Engineer-in-Charge.Note :- Spares required for geyser will be measured and paid separately.
35
-
-
... More
Supply and Fix electric water heater storage type steel body with copper inner tank and heating element upto2 KW capacity 25 Litre BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, as ,connection piece etc. Make : Bajaj/C&G/ Havell's (Monza EC). Note : Old uns geyser will be deposited to SDO (MES) Jamshedpur.
35
-
-
... More
S&F in replacement of LED Street light luminaries fittings 60 watt green line a road lighting luminaries with high power LED and unique peanut to ensure uniform light distribution higher spacing between poles and maintenance free system Make-Bajaj/ HPL- cat part No HPLLEDSL6060/Havells Note:- (i) The contractor shall produce minimum two years warrenty against any manufactures defect/ failure of fitting from the authorised representative / OEM of the make as specified and brought at site. (ii) The Lux output shall not be less than 100 lumins per watt. (iii) The PF should be 0.90 (iv) The LED street light fittings shall be provided with overload / under load protection with range 180 to 380 volts and inbuilt surge protection device. (v) The contractor / manufacture shall provide on site warranty for carrying out necessary repair / replacement of defective street light fittings. (vi) The LED fitting and driver in fitting shall be of same make.
20
-
-
... More
S & F GI pipe 15 mm bore medium grade complete with all fitting like bend, elbows ,sockets ,union ,tees, nipple/long thread etc all as directed.
85
-
-
... More
S&F in 15 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, for following bore dia:Make-Shakti/Scud:-
33
-
-
... More
S&F door gasket for water cooler cap 40/80 lit per hour complete all as specifide & directed by Engr-in -charge.
5
-
-
... More
M&L for preparation of complete old painted surface of 40/80 litres capacity water cooler, externally, internally including compressor chamber, compressor motor etc and applying one coat of synthetic enamel paint with spray machine including rewritting of MES No. complete all as specifide & directed by Engr-in -charge.
4
-
-
... More
Supply and replace condenser cooling fan motor with fan blade of cap 1/30 HP suitable for water cooler of cap 80/40, 100 ltrs. Make - AUE
2
-
-
... More
S&F in repair, flot valve high pressure of PTMT body with epoxy coated Aluminium rod and high density plastic ball screwed for 15 mm bore iron pipe, weight not less than 142 grams/each, fixed to water cooler complete all as specifide & directed by Engr-in -charge.
4
-
-
... More
S&F in repair, 15 mm bore water tap, cast copper alloy, chromium plated push type suitable for water cooler of any capacity complete all as specifide & directed by Engr-in -charge.
4
-
-
... More
S&F in repair, starting capacitor 80-100 MFD suitable for water cooler of any capacity complete all as specifide & directed by Engr-in -charge.
4
-
-
... More
S&F in repair, running capacitor 40-60 MFD suitable for water cooler of any capacity complete all as specifide & directed by Engr-in -charge.
3
-
-
... More
S&F in repair, thermostate suitable for water cooler of any capacity complete all as specifide & directed by Engr-in -charge.
3
-
-
... More
S&F in repair, waste water tray, stainless steel with coupling suitable for water cooler of capacity 40/80 liters complete all as specifide & directed by Engr-in -charge.
2
-
-
... More
S&F in repair, relay with over load protection suitable for 40 to 150 liters capacity water cooler complete all as specifide & directed by Engr-in -charge.
2
-
-
... More
S&F in repair, PVC drain out pipe, heavy duty 32/40 mm dia, wall thickness 2 mm having length not less than 1.0 mtr complete with fitting such as nipple, clips etc complete fixed to water cooler of any capacity complete all as specifide & directed by Engr-in -charge.
8
-
-
... More
Removing the unserviceable compressor sealed unit of any make from water cooler of capacity 40/80 liters after cutting copper tubing without any damage to exisiting parts, replacing compressor with new compressor of same make refixing of compressor on bace & jointing of copper refrigerant pipe line filter etc & charging gas to required level, including cleaning of fins, leakage testing etc including testing & commissioning for smooth functioning complete all as specifide & directed by Engr-in -charge.
3
-
-
... More
S&F in repair, condensing coil suitable for water cooler of capacity 40/80 liters complete all as specifide & directed by Engr-in -charge.
3
-
-
... More
M & L for flushing,pressurising the system , leakage testing vacuumisation and GAS CHARGING with refrigerant gas (R-134) at apprporiate pressure including testing at site for water cooler of cap 80/40 ltrs.
5
-
-
... More
S&F door gasket for refrigerator 165/175/286/310 lit cap complete all as specifide & directed by Engr-in -charge.
3
-
-
... More
M&L for cutting and removing uncervicable freezer unit of refrigerator of capacity 165 to 210 liters of any make, and supply and fix new freezer unit including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specifide & directed by Engr-in -charge.
2
-
-
... More
M&L for cutting and removing uncervicable freezer unit of refrigerator of capacity 286 to 310 liters of any make, and supply and fix new freezer unit including jointing, brazing, recharging of refrigerant gas and testing for smooth functioning complete all as specifide & directed by Engr-in -charge.
2
-
-
... More
M&L for preparation of external old painted surface of refrigerator of capacity165 to 310 liters of any make, including making good of denting etc and applying one coat of duco paint with spray machine including polishing complete all as specifide & directed by Engr-in -charge.
3
-
-
... More
S&F in repair, thermostate suitable for refrigerator 165 to 310liters capacity complete all as specifide & directed by Engr-in -charge.
3
-
-
... More
Removing the unserviceable compressor sealed unit of refrigerator of capacity 286/310 liters of any make, & replacing with new compressor of same make & model, rein-stalling in orignal position with all accessories like relay with over load protector, filter & recharging of refrigerant gas complete including testing & commissioning for smooth functioning complete all as specifide & directed by Engr-in -charge.
1
-
-
... More
Removing the uncerviceable compressor sealed unit of refrigerator of capacity 165/175/195 liters of any make, & replacing with new compressor of same make & model, rein-stalling in orignal position with all accessories like relay with over load protector, filter & incl charging of refrigerant gas complete including testing & commissioning for smooth functioning complete all as specifide & directed by Engr-in -charge.
2
-
-
... More
M & L for flushing, pressurising the system , leakage testing vacuumisation and gas charging with refrigerant gas (R-134) at apprporiate pressure including testing at site for refrigerator of cap 165/195 ltrs.
2
-
-
... More
M & L for flushing,pressurising the system , leakage testing vacuumisation and gas charging with refrigerant gas (R-134) at apprporiate pressure including testing at site for refrigerator of cap 285 / 310 ltrs.
3
-
-
... More
S&F lamp with holder for refrigerator any capacity and any make incl removing old unsv lamp all as specified and directed by Engr In charge
3
-
-
... More
Dismantling unserviceable compressor sealed unit of any make from deep freezer of cap 310 liter after cutting the copper tubing without any damage to existing parts, replacing the compressor with new compressor refixing of compressor on base with suitable capiliary tube , filters etc & jointing of copper refrigerant pipe line, with charging of suitable refrigerant gas to required level incl cleaning of condenser fins leakage testing etc incl testing & commissioning for smooth functioning complete all as specified & directed by Engr in Charge
2
-
-
... More
M&L for removing the old burnt out condenser fan motor of Deep freezer of capacity 310/220 liters from position and replacing with new motor and reassembling and fixing in position complete all as specifide & directed by Engr-in -charge.
1
-
-
... More
Dismantling unserviceable compressor sealed unit of any make from window type Air Conditioner of cap 1.5 TR after cutting the copper tubing without any damage to existing parts, replacing the compressor with new compressor refixing of compressor on base with suitable capiliary tube , filters etc & jointing of copper refrigerant pipe line, with charging of suitable refrigerant gas to required level incl cleaning of condenser fins leakage testing etc incl testing & commissioning for smooth functioning complete all as specified & directed by Engr in Charge
2
-
-
... More
Description all as ser item No 191 above but 2.0 TR cap window type Air Conditioner
1
-
-
... More
Supply and replace BLOWER FAN MOTOR 1/8 HP suitable for window type AC cap 1.5/2 ton
2
-
-
... More
S&F running capacitor 45/50 MFD suitable for A/C of cap 1.5/2.0 TR complete incl removing unserviceable running capacitor all as specified & directed by Engr In Charge
2
-
-
... More
S&F starting capacitor 100-120 MFD suitable for A/C of cap 1.5/2.0 TR complete incl removing unserviceable starting capacitor all as specified & directed by Engr In Charge
2
-
-
... More
S&F Aluminium fan blade suitable for condensing side of window type AC 1.5/2.0 TR cap complete all as specified & directed by Engr In Charge
2
-
-
... More
S&F PVC blower blade heavy duty suitable for evaporative side of window type Air conditioner 1.5/2.0 TR cap complete all as specified and directed by Engr in charge
2
-
-
... More
S&F starting relay suitable for window type AC 1.5/2.0 TR cap complete all as specified and directed by Engr In Cahrge
3
-
-
... More
S&F over load protector relay suitable for window type AC 1.5/2.0 TR cap complete all as specified and directed by Engr In Charge
3
-
-
... More
S&F thermostat suitable for 1.5/2.0 TR cap window /Split type AC complete all as specified and directed by Engr In Charge
4
-
-
... More
S&F air filter for split type AC 1.5 TR cap ( Set of three) complete all as specified & directed by Engr in Charge
2
-
-
... More
Dismantling unserviceable compressor sealed unit of any make from external unit of Split type Air Conditioner of cap 1.5 TR after cutting the copper tubing without any damage to existing parts, replacing the compressor with new compressor refixing of compressor on base with suitable capiliary tube , filters etc & jointing of copper refrigerant pipe line, with charging of suitable refrigerant gas to required level incl cleaning of condenser fins leakage testing etc incl testing & commissioning for smooth functioning complete all as specified & directed by Engr in Charge
2
-
-
... More
Supply and replace BLOWER FAN MOTOR 1/8 HP suitable for split type AC cap 1.5 ton
2
-
-
... More
S&F in repair PVC flexible drain out pipe of Split type , heavy duty of 15/25mm dia and 1.5mm wall thickness complete with fittings , spacers and saddles etc complete all as specified & directed by Engr In Charge
6
-
-
... More
S&F repair wireless remote control (Micro processor ) unit suitable for Split type AC any cap testing & complete all as specified and directed by Engr In Cahrge
4
-
-
... More
Taking down for serviceing the cooling side blower motor of cap 1/30 HP to 1/20 HP from split type AC & M&L for new motor and refixing of motor in original position with new washers nuts & bolts incl testing complete all as specified & directed by Engr In Charge
3
-
-
... More
S&F PCB circuit of existing size & shape to split type AC having cap 1.5 TR complete all as specified & directed by Engr In Charge
3
-
-
... More
M&L for servicing of Split /window type AC of Cap 1.5TR/2.0 TR of any make by opening the conderser unit fixed on roof top & cooling unit fixed inside the building, cleaning the complete conderser unit & cooling unit incl fins &checking / testing of all parts for its serviceablity & oiling/greasing of motors , replacing the worn out bushes of blowers & rectfication of unuseal noises , checking of refrigerent standing pressure, topping up of refrigerant gas upto the reqd level, replacemnt of minor parts such as nuts bolts & washers etc & reassembling of complete unit incl testing & commissioning for smooth functioning complete all as specified & directed by engr in charge
4
-
-
... More
M & L for flushing, pressurising the system , leakage testing vacuumisation and gas charging with refrigerant gas (R-22) at apprporiate pressure including testing at site for window/Split type AC cap 1.5 ton.
6
-
-
... More
S&F single pole and neutral enclosure with metal clad plug & socket 20 Amps & with MCB SP 20 Amps complete all as specified and directed by Engr in Charge
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%