Military Engineer Services Tender

M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) on wall finishing the surfaces even and smooth without using extra cement.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded aggregate as in base or plinth protection etc finished cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L cement concrete type D-2, 1:4:8 (40 mm graded aggregate) 100 mm thick as in Sub-base of floor.

M & L machine pressed precast concrete interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade laid over sand cushioning.

M&L for Sand filling under floors or in foundations including watering and consolidation.

Material and labour for providing cement concrete (1:2:4) type B0 (Using 12.5 mm graded broken stone aggregate) as in coping and like including weathering slightly rounded or chamfered angles and throathing and including necessary form work.

S&F sign board of size 90 cm x 60 cm, made out of aluminium composite pannel board 3 mm thick having PVDF coating, skin thickness not less than 0.25mm thick, high intensity reflective maintenance free sheet including writing letters/site map on both side of sheet as per requirement/location with high reflective sheet/tape of make 3M colour & design as approved including stainless steel frame work with verticle pipes (2 Nos) as per 319 AISI, the frame consist of SS sqaure pipes of size 25 mm X 20 mm having thickness 1.5 mm and verticle post made of SS 50 mm dia pipe, 1.5 mm thick, including fixing the legs of sign board in PCC block (B2 1:2:4) of size 500x500x600 mm complete all as specified as directed. Note: 1. Hieght of letter exc 150 mm but n exc 300 mm all as per user requirement 2. Rate inclusively of necessory excavation & PCC work 3. Top of board shall be fixed at 2.10 mtr hieght from GL.

Description all as per item no 11 above, but size of board 75 cm x 45 cm.

S&F road studs of ABS material, size 100mm x 100mm x 18.5 mm with two side acrylic reflector etc complete all as specified and as directed. Make DARK EYE/SHAKTI/3M.

S&F delineators of ABS round body fitted with 2 Nos. 100mm or 65 mm dia highly reflective reflectors made out of PMMA and mounted on MS pipe of 50 duly powderccoated, anti rust & anti theft steel net all as specified andcdirected. Make DARK EYE/SHAKTI/3M.