Urban Development Department Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Urban Development Department - JUIDCO Tender
Building Construction
Eprocure
Opening Date2 Sep 2019
Closing Date10 Sep 2019
Tender Amount₹ 5,06,36,147
Costs
EMD
₹ 10,12,723Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_UDD_41424_1Bid Award Id
ViewTender No
UDD/AMC/02/2019-20Tender Authority
Urban Development Department ViewPurchaser Address
-Website
http://http://juidco.jharkhand.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing P.C.C. M - 75 with nominal mix of (1:4:8) in foundation with approved quality of stone metal grade III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
166
-
3796.47
Providing P.C.C. M - 150 with nominal mix of (1:2:4) in foundation with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
4.34
-
5913.65
Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.
1736.77
-
146.99
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
260.1
-
450.35
RCC WORK : Providing RCCM-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cemnt concrete in mixer and placing in possition, vibrating, striking, curing (but ecxcluding the cost of reinforcement, taxex and royalty all complete as per building specification and direction of E-I)
184.93
-
6543.32
Providing R.C.C.M - 200 with nominal mix of (1:1.5:3) in columns with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing (but excluding the cost of reinforcement) taxes and royalty all complete as per building specification and direction of E/l.
102.44
-
7647.84
Providing RCCM-200 with nominal mix of (1:1.5:3) in roof slab with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cemnt concrete in mixer and placing in possition, vibrating, striking, curing (but ecxcluding the cost of reinforcement, taxex and royalty all complete as per building specification and direction of E-I)
382.42
-
8235.61
Providing RCCM-200 with nominal mix of (1:1.5:3) in beam with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cemnt concrete in mixer and placing in possition, vibrating, striking, curing (but ecxcluding the cost of reinforcement, taxex and royalty all complete as per building specification and direction of E-I)
301.82
-
8928.5
Providing R.C.C. M.-200 with nominal mix of (1:1.5:3) in stair case with approved quality of stone chips 20 mm to 6mm size graded and clean coarse sand of F M 2.5 to 3 including centering, shuttering, screening, mixing cement concrete in mixer placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l
5.28
-
12524.96
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
200
-
34.15
Providing & Fixing TMT steel reinforcement as per approved design & drawing 8/10/12/16/20/25/32 mm dia TMT bar Fe 500
95.03
-
53433.91
BRICK WORK : Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
93.41
-
3820.68
Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
699.64
-
3910.67
Providing designation 125 mm thick reinforced designation 75 A brick work in C.M (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, carriage of materials , scafolding, raking out joints to 15 mm depth, curing, taxes and royalty ( but excluding the cost of reinforcement) all complete as per building specification and direction of E/l.
545.1
-
530.21
Extra for providing & placing in position 2 no 6mm dia ms bar every 3rd corse of half brick masonary
545.1
-
56.85
WOOD WORK : Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge.
30.8
-
1260
Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634- 1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge
19.68
-
6839.35
Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections , of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge.
100.8
-
425.9
Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers
44.1
-
2967.8
STEEL WORK : Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
100
-
85.95
Supplying and fiting and fixing M.S Grill made of 20 x 6 cmm M.S flat as per approved design and drawing , properly fabrication with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of engineer- in- charge ( where materials is not supplied by the deptt.)
432.86
-
57.69
FLOORING WORK : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. 800 x 800 mm size
465.76
-
1119.4
Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints .specification and direction of E/I. 600 x 600 mm size
33.15
-
1240.6
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
190.05
-
688.35
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
430.42
-
744.8
Providing and laying 15 mm - 23 mm thick kotah stone slab flooring of approved size, texture and colour over 19mm thick base of lime morter (1:1:1) (lime putty : surkhi: coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. (IV) 600x600mm size
1925.67
-
1457.48
Providing and laying 15 mm - 23 mm thick kotah stone tiles in risers of steps, skirting and pillars of approved size, texture and colour laid over 12mm thick cement mortar (1:3) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I.
153.68
-
1469.72
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 SQM
26.68
-
3113.3
Providing edge moulding to 18 mm thick marble/granite stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work
174.4
-
245.7
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
32
-
427.95
Providing 50 mm thick cement concrete flooring (1:2:4) with 20 mm to 6mm size graded stone chips finished with floating coat of neat cement in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l
85.68
-
424.99
Providing and fixing brick cladding upto all heights with uniform colour, fixed to with the mortar over 12mm thick bed of cement mortot 1:3 (1 Cement : 3 Coarse sand) including cement with an admixture of pigment to match the brick cladding shade direction of Engineer-in-Charge.
343.73
-
2152
ROOFING & WATER PROOFING WORK : Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :
346
-
153
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
10
-
187.6
ROOF/TERRACE WATER PROOFING : Providing and laying integral cemnt based water proofing treatment including preparation of surface as required for treatment of roofs, balconiessssss, terraces etc. conssting of following operations : a) Applying a slurry coat of neat cement usng 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS:2645 and approved by E/I. over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) --- c) --- d) ------ (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge ,With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
1835
-
1034.65
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatmentand sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry
190.05
-
298.3
FINISHING WORK : Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
4091.22
-
137.07
Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per specification and direction of E/I.
2940.41
-
133.78
Providing 19 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
2460.77
-
218.34
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
7031.63
-
87.35
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.Two coats
2460.77
-
81.14
Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.
7031.63
-
75.61
ALUMINIUM WORK : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling to be paid for separately):
For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)
3822.12
-
384.5
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)
2548.08
-
444.9
Providing and fixing glazing in door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item); with float glass pabes of 5.50mm thickness.
1110.22
-
1003.95
FALSE CEILING & PARTITIONS : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, At 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I
142.92
-
806.2
HORITICULTURE WORKS : SUPPLYING WORKS :Supplying and stacking of good earth at site including royalty and carriage up to 1 km (earth measured in stacks will be reduced by 20% for payment).
160
-
332.55
Supplying and stacking at site dump manure from approved source, including carriage up to 1.0 km (manure measured in stacks will be reduced by 8% for payment)
-
-
-
Screened through sieve of IS designation 20 mm
75
-
170.7
Screened through sieve of IS designation 16 mm
125
-
192.05
Screened through sieve of IS designation 4.75 mm
200
-
209.15
Supplying and stacking of well decayed cow dung manure at site including royalty and carriage up to 1.0 km (cow dung manure measured in stacks will reduced by 8% for Payment)
160
-
189.1
PREPARATION WORK : Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure)
800
-
45.85
Rough dressing the trenched ground including breaking clods
800
-
0.9
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation
800
-
2.9
Fine dressing of the ground
800
-
2.15
Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-in-charge
800
-
21.35
Spreading of sludge, dump manure and / or good earth in required thickness as per direction of Engineer-in-charge (cost of sludge, dump manure and / or good earth to be paid separately).
800
-
30.95
Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts
800
-
35.75
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50.0 m, lift up to 1.50 m complete (cost of sludge, manure or extra earth to be paid for separately)
800
-
130.35
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
Holes 1.2 m diameter and 1.2 m deep
5
-
236.75
Holes 90 cm diameter and 90 cm deep
5
-
101.4
Holes 60 cm diameter and 60 cm deep
5
-
31.35
PLANTING WORKS : Grassing with selection No1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately) In rows 5 cm apart in both directions
1200
-
10.4
Carriage of Materials
-
-
-
Cement
156.83
-
158.18
Sand
376.7
-
423.18
Chips
158.88
-
504.18
Steel
95.03
-
158.18
Bricks
427.6
-
760.77
BOUNDARY WALL : Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.
289.29
-
102.1
Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l.
102.06
-
37.17
Removal & disposal of surplus excavated earth by mechanical transport including loading unloading stacking and spreading at all lift and lead up to 5km to spoil dump approved by local authority.
82.49
-
263.63
Providing P.C.C. M - 75 with nominal mix of (1:4:8) in foundation with approved quality of stone metal grade III (50 mm to 25 mm size) clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/l.
20.44
-
3795.47
Providing RCCM-200 with nominal mix of (1:1.5:3) in foundation and plinth with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of FM 2.5 to 3 including screening, shuttering, mixing cemnt concrete in mixer and placing in possition, vibrating, striking, curing (but ecxcluding the cost of reinforcement, taxex and royalty all complete as per building specification and direction of E-I)
62.05
-
6543.32
Proviting TMT Steel reinforcement as per approved desing & Drawing
4.96
-
53433.91
Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
45.68
-
3820.68
Providing Designation 100A B/W with Fly Ash Lime Brick (FALB) conforming to IS 12894-1990 (9"x4.5"x3") in cement mortar (1:6) in Superstructure with clean coarse sand of F.M. 2 to 2.5 including 10mm thick mortar joints,cost of screening, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.
68.51
-
4081.77
Supplying, fitting and fixing M.S. grill gate with M.S. grills made of 20x6mm M.S. flats or 16mm square bars fitted on 25x25x6mm M.S Angle frame including cost of fabrication , providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/l.
3777.28
-
78.38
Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.
764.79
-
125.34
Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, scaffolding, curing and taxes all complete as per building specification and direction of E/l.Two coats
764.79
-
81.14
Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l.
206.7
-
53.2
Carriage of Materials
-
-
-
Cement
158.18
-
158.18
Sand
87.55
-
423.18
Chips
53.36
-
504.18
Steel
19.63
-
158.18
Bricks
3.78
-
760.77
ROAD WORK : Excavation in soil using Hydraulic Excavator CK 90 and Tippers with disposal up to 1000 meters. (excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including setting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within al lifts and lead up to 1000m)
-
-
-
including Royalty @ Rs. 24.00 per cum, cost of watering, rolling & compaction.
146.64
-
122
Granular sub-base with close graded material (Table 400-1) - By mix in place method (construction of granular sub base by providing close graded material, spreading in uniform layers with motor graded in prepared surface, mixing by mix in place method with rotator ta OMC and compacting with vibratory roller to achieve the desired density, complete as per clause 401) For Grading -II Material For 53 mm Mix Size
146.64
-
1158
Dry Lean cement concrete Sub-Base (Construction of Dry Lean Cement Concrete Sub-Base over a prepared sub grade with coarse and fine aggregate confirming to IS:383, the size of coarse aggregate not exceeding 25mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10MPa at 7 days, mixed in batching plant, transported to site laid with a paver with electronic sensor, compacting with 8-10 tones vibratory roller finishing and curing)
195.05
-
2239
Cast in Situ Cement Concrete M20 kerb (Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 408
100
-
224
Carriage of Materials
-
-
-
Sand
132.77
-
258.23
Chips
90
-
746.88
ELECTRICAL WORKS: Supplying of following 1100 volt grade XLPE insulated PVC sheathed aluminium / Copper conductor armoured cables as per specification as required.
-
-
-
3.1/2 core 240sq. mm.
275
-
2059.2
3.1/2 core 35sq. mm.
40
-
408.1
3.5 core 25sq. mm.
50
-
331.1
4 core 16sq. mm.
100
-
268.4
4 core 10 sq. mm.
50
-
236.5
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 25 sq. mm
30
-
199
Above 25 sq. mm and upto 120 sq. mm
15
-
209
Above 120 sq. mm and upto 400 sq. mm
180
-
220
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 25 sq. mm
20
-
137
Above 25 sq. mm and upto 120 sq. mm
10
-
142
Above 120 sq. mm and upto 400 sq. mm
70
-
148
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ STONE WARE / METAL pipe/ Cable Trays as required.
-
-
-
Upto 25 sq. mm
140
-
29
Above 25 sq. mm and upto 400 sq. mm
45
-
40
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing mansory open duct as required
-
-
-
Upto 25 sq. mm
10
-
24
Above 25 sq. mm and upto 400 sq. mm
20
-
32
Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade.
-
-
-
3.1/2 core 35sq. mm.
2
-
282
3.1/2 core 25sq. mm.
4
-
257
4core 16sq. mm.
4
-
255
4 core 10sq. mm.
2
-
203
3.1/2 core 240sq. mm.
6
-
989
Cable trays : Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.( Powder coated shall be of Siemens Grey Colour- RAL 7032)
-
-
-
450mm width x 50mm depth x 1.6mm thickness
40
-
782
300mm width x 50mm depth x 1.6mm thickness
100
-
526
150mm width X 50mm depth X 1.6 mm thickness
50
-
393
100mm width X 50mm depth X 1.6 mm thickness
25
-
348
Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17 .5%, joined with connectors,
suspended from the ceiling with M.S. suspenders including bolts & nuts, painting
suspenders etc. as required.
-
-
-
450mm width X 50mm depth X 2.0 mm thickness
5
-
1617
300mm width X 50mm depth X 1.6 mm thickness
10
-
1023
150mm width X 50mm depth X 1.6 mm thickness
6
-
714
100mm width X 50mm depth X 1.6 mm thickness
4
-
604
Design, fabrication, assembling, wiring & supply, installation, testing & commissioning of MV Panels fabricated out of 2mm thick for structural members (Load bearing members) and 1.6mm thick for door and covers (Non load bearing members) CRCA painted sheet steel in cubicle formation with reinforcement of suitable size angle iron, channels, T irons, flats wherever necessary for large meter boards. Cable gland plates shall be provided at top and bottom both and windows for meter reading, locking arrangement (pad-lock & seal) with wiring upto KWH meter & meter to MCB shall be done by using adequately rated flexible single core copper wire. The boards shall be treated with all anticorrosive process before painting as per standards with final approved shade of powder coated as approved, 2 nos. earthing terminals shall be provided for all panels. The boards shall be suitable for 415 V, 3 phase, 4 wire, 50 Hz supply system. Boards shall be fabricated in length, An approval shall be taken for each panel before manufacturing. Galvanised hardwares with zinc passivation shall be used in fabrication of boards. Note: The following provisions shall be required to be made in the switchboard detailed belowThe Switchboard shall have provision for entry of all PVCA cables/bus duct from the top/bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbar insulation shall be with heat shrinkable sleeves. SMC/DMC shrouds and busbar supports shall be used.
-
-
-
Suitable tinned copper extension links for incoming/outgoing cables shall be provided wherever required. Control circuits includes breaker control switch, auto manual selector switch, anti pumping relay, spring charging trip indication, TIMER, control wiring, Auxiliary contactors MCB's as required at site. Positive isolation of all breakers. All fault level breaking capacity indicates shall be IC.S value at 415 volts (ICS = ICU = ICW = 100%). Space Heater/ light/air filter shall be provided for each vertical compartment Padlocking facility shall be provided on all outgoing feeders. All ACB's shall have all standard accessories such as CT's, Arc Chute, Safety Shutters etc. All inter Panel wiring from PLC to DG / Transformer / Bus Couplers as required. Link and drops from ACB/MCCB shall be designed for full rated current of ACB/MCCB ratings at same current density as of Main Bus Bar. 2 nos. GI earth strip throughout the panel. 1 Nos. 250 Amps TPN Moulded Case Circuit Breaker (Icu = Ics) with built in Microprocessor based release unit for short circuit , over current and earth Fault. 3 Nos. Cast resin CTs of ratio 200 / 5 Amps CL:1 ( For Metering) , 5P20( For protection) , 15 VA. R-Y-B indication Lamp and Breaker ON-OFF Indication Lamp
-
-
-
Energy Analyser having 30 Days Memory Digital voltmeter with inbuilt selector switch- 1 set Digital Ammeter with inbuilt selector switch- 1 set 250A FP AC#3 duty Contactor with ON-OFF indicatio lamp and Contacor ON-OFF pish Button FUTURE DG INCOMER#2 1 Nos. 250 Amps TPN Moulded Case Circuit Breaker (Icu = Ics) with built in Microprocessor based release unit for short circuit , over current and earth Fault 3 Nos. Cast resin CTs of ratio 250 / 5 Amps CL:1 ( For Metering) , 5P20( For protection) , 15 VA. R-Y-B indication Lamp and Breaker ON-OFF Indication Lamp Over Voltage relay (59) And Under Voltage relay (27) with time delay Energy Analyser having 30 Days Memory. Digital voltmeter with inbuilt selector switch- 1 set Digital Ammeter with inbuilt selector switch- 1 set Digital Frequency Meter. 250A FP AC#3 duty Contactor with ON-OFF indicatio lamp and Contacor ON-OFF pish Button. Auxiliary contacts required for necessary interlocking of contactor with breaker. Battery Charger for DG batteries with DC meters , selector switches etc as required 8 Window Annunciation with push Buttons as required
-
-
-
Bus Bar : 300A, TPN Al. Bus Bar of suitable length having Current density 1Amp/sq.mm & having high conductivity electrical grade suitable to withstand symmetrical fault level of 16 kA. Neutral busbar shall be of 100% capacity. 3 Nos. 63 Amps TPN Moulded Case Circuit Breaker (Icu = Ics) with built in Thermal Magnetic based release unit for short circuit and over current. 4 No. 63A TPN MCB ( Type C). 6 No. 40A TPN MCB ( Type C). 4 No. 40A DP MCB ( Type C). CAPACITOR PANEL 25 kVAR (in Built) 3 Set of 100 /5A for , CL-1.0, 10VA measuring CTs for Metering Square flush mounted digital Ammeter of 96 mm sq. scaled 0-800 amps with 3 way and OFF selector switch 1 Set of phase indicating lamps with MCB. 6 step APFCR relay microprocessor based to sense and monitor the system power factor and provide impulses for operation of 6 sequential capacitors. circuits. Power factor meter ( digital )
-
-
-
Bus bars 100A, TPN Al. Bus Bar of suitable length having Current density 1Amp/sq.mm & having high conductivity electrical grade suitable to withstand symmetrical fault level of 10 kA. Neutral busbar shall be of 100% capacity. Outgoings : 2 Nos 25 A TP MCB each complete with 32A AC 3 duty TP contactor suitable for automatic switching of 10kVAR Capacitor bank) with indicating lamps to give status of circuit , 10 kVAR Hermetically sealed MPP-H type capacitors with fuse protection , discharge resistors , interconnections , set of push buttons red and green for mannual operation of capacitor units , A/M selectors switch etc. as required. 4 Nos 16 A TP MCB each complete with 16A AC 3 duty TP contactor suitable for automatic switching of SkVAR Capacitor bank) with
indicating lamps to give status of circuit , 5 kVAR Hermetically sealed MPPH type capacitors with fuse protection , discharge resistors , interconnections , set of push buttons red and green for mannual operation of capacitor units , A/M selectors switch etc. as required. 1 Nos 10 A TP MCB each complete with 9A AC 3 duty TP contactor suitable for automatic switching of 2kVAR Capacitor bank) with
indicating lamps to give status of circuit , 2 kVAR Hermetically sealed MPPH type capacitors with fuse protection , discharge resistors , interconnections , set of push buttons red and green for mannual operation of capacitor units , A/M selectors switch etc. as required. 1 Nos 10 A TP MCB each complete with 9A AC 3 duty TP contactor suitable for automatic switching of 3 kVAR Capacitor bank) with
indicating lamps to give status of circuit , 3 kVAR Hermetically sealed MPPH type capacitors with fuse protection , discharge resistors , interconnections , set of push buttons red and green for mannual operation of capacitor units , A/M selectors switch etc. as required
-
-
-
Main DB with capacitors as described Above
1
-
291958
Design, fabrication, supply of Feeder Pillar fabricated out of 2mm thick for structural members (Load bearing members) and 1.6mm thick for door and covers (Non load bearing members) CRCA sheet in cubicle compartmentalize free standing floor mounted, dust and vermin proof outdoor type double door with reinforcement of suitable size angle iron, channel 'T' irons and / or flats wherever necessary. Cable gland plates shall be provided at the bottom of the panels. Panels shall be treated with all anticorrosive process before powder coating as per specifications with 2 coats of PU paint primer and final approved shade of PU paint coating. 2 Nos. earthing terminals shall be provided for all distribution panels. Panels shall be suitable for 415V, 3-phase, 4-wire, 50Hz supply system and with 15% spare space, lifting hooks shall also be provided in case of large panels.
-
-
-
Approval shall be taken for each panel before fabrication. Galvanized hardwares with zinc passivation shall be used in fabrication of panels. 1 no. 63 Amp TPN MCCB, 10 ICA with thermal magnetic protective releases. 1 set of phase indicating lamps with MCB. BUSBAR 100A, TPN Al. Bus Bar of suitable length having Current density 1Amp/sq.mm & having high conductivity electrical grade suitable to withstand symmetrical fault level of 10 kA. Neutral busbar shall be of 100% capacity.
-
-
-
OUTGOING : 2 No. 40A FP MCB, 2 No. 40A DP MCB, 2 No. 20A DP MCB, 3 Nos. single phase bank each consisting of 1 No. 24 Hr Programmable timer, contactor and 6 nos. 10A/20A amp DP MCB, 10 ICA with thermal magnetic protective releases as outgoings.
1
-
67684
Installation, testing and commissioning External lighting Feeder Pillars as mentioned in item No. 1 above fabricated out of 2mm thick for structural members (Load bearing members) and 1.6mm thick for door and covers (Non load bearing members) CRCA sheet in cubicle compartmentalize free standing floor mounted, dust and vermin proof outdoor type double door including providing & making brick masonry foundation (including plastering etc.) of suitable size with all fixing accessories as required.
1
-
6000
Earthing with copper . Earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc.( without charcoal or coke and salt).
2
-
6521
Earthing with G.I. Earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( without charcoal or coke and salt).
6
-
2883
Extra for using coke and salt for GI/Copper plate earth electrode complete as required.
6
-
1344
Extra for using charcoal and salt for GI/Copper plate earth electrode complete as required.
2
-
2841
Supply and laying 25mmX5 MM GI strip at 0.50 meter below ground as strip earth electride including soldering etc as required
50
-
74
Supply and laying 25mmX6 MM GI strip at 0.50 meter below ground as strip earth electride including soldering etc as required
75
-
93
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
25
-
746
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
300
-
112
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode
100
-
435
Providing and fixing 25 mm X 5 mm Cu. strip in 40 mm dia G.I. pipe from earth electrode
20
-
1039
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
400
-
46
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
50
-
103
Providing and fixing earth bus of 50mmX 5mm copper strip on surface for connections etc. as required
10
-
1412
Prividing and Fixing of copper lightning conductor Finial made of 25mm dia 300 mm Long GI tube , having single prone on top with 85mm dia 6mm thick GI base plate including holes etc complete as required
2
-
980
Providing and fixing GI-tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor as required.(for vertical run)
40
-
50
Providing and fixing GI-tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor as required.(for horizontal)
250
-
74
Providing and fixing testing joint, made of 20 mm x 3 mm thick gi strip, 125 mm long with 4 Nos. brass bolts, nuts check nuts and spring washers etc. complete as required.
2
-
56
Providing and laying GI tape, 32 mm x 6 mm thick from earth electrode directly in ground as required.
25
-
108
EARTHING : Earthing with copper, Earth plate 600mm x 600 mm x 3mm thick inluding accessories and providing masonary enclousre with cover plate having locing arrangement and watering pipe etc. (without charcol or coke and salt)
2
-
6521
Earthing with G.I. Earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( without charcoal or coke and salt).
6
-
2883
Extra for using coke and salt for GI/Copper plate earth electrode complete as required.
6
-
1344
Extra for using charcoal and salt for GI/Copper plate earth electrode complete as required.
2
-
2841
Supply and laying 25mmX5 MM GI strip at 0.50 meter below ground as strip earth electride including soldering etc as required
50
-
74
Supply and laying 25mmX6 MM GI strip at 0.50 meter below ground as strip earth electride including soldering etc as required
75
-
93
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
25
-
746
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
300
-
112
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode
100
-
435
Providing and fixing 25 mm X 5 mm Cu. strip in 40 mm dia G.I. pipe from earth electrode
20
-
40
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
400
-
46
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
50
-
103
Providing and fixing earth bus of 50mmX 5mm copper strip on surface for connections etc. as required
10
-
1412
Prividing and Fixing of copper lightning conductor Finial made of 25mm dia 300 mm Long GI tube , having single prone on top with 85mm dia 6mm thick GI base plate including holes etc complete as required
2
-
980
Providing and fixing GI-tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor as required.(for vertical run)
40
-
50
Providing and fixing GI-tape 20 mm x 3 mm thick on parapet or surface of wall for lightning conductor as required.(for horizontal)
250
-
74
Providing and fixing testing joint, made of 20 mm x 3 mm thick gi strip, 125 mm long with 4 Nos. brass bolts, nuts check nuts and spring washers etc. complete as required.
2
-
56
Providing and laying GI tape, 32 mm x 6 mm thick from earth electrode directly in ground as required.
25
-
108
Supply and Installation of Light Fixtures and Exhaust Fans : Supply and Installation of following Type LED/CFL fixture shall be complete with Electronic Ballast, PF improvement capacitor, control gear bx, lamp holder, starter, starter base, all pre wired upto the terminal block. all fixture shall be supplied with lamps. (make Philips/Bajaj/Wipro/Throne)
-
-
-
Surface/Wall Mounted 22W LED Tube
95
-
777
Surface Mounted 2x22W LED Tube
60
-
1328
10W Round Recessed Mounted type LED Luminiare
20
-
814
10W Round Surface Mounted type LED Luminiare
180
-
994
10W LED Builhead fixture
20
-
1349
Ceilling Fans : Supply and fixing circular/hexagonal M.S. Sheet ceiling fan box with clamp of internal dia 140m, 73mm height, 3mm thick rim top lid of 1.5mm thick M.S. Sheet lidss shall be screwed into M.S. box by means of 3mm round headed screw, clamps shall be made of 12mm dia M S bar bent to be shape as per standard drwaing
120
-
138
Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc. as required.
55
-
384
Installation, testing and commissioning of ceiling fans/bracket fan of all sizes including wiring the down rod .of standard length (up to 30 cm ) with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc as required.
120
-
56
Supplying and of 1200mm sweep ceiling fan with 300/600 mm standard down rod and electrical connection as required etc.
120
-
1775
Supplying of wall bracket fan
25
-
1479
Exhaust fans : Supply of heavy duty type exhaust fans of following size sweep with gravity louvers shutters including all accessories/installation materials required make HAVELS/USHA. 305 mm sweep 900 rpm
10
-
3254
Installation of exhaust up to 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioing etc. as required
10
-
454
Extra for fixing the louvers/shutters complete with Frame for a exhaust fan of all sizes.
10
-
132
TELEPHONE, TV and DATA : Providing, fixing, connecting, testing and commisssioning of zinc passivated box with moulded plate in recess or on surface moulded type with following including all necessary materials etc. as required.
-
-
-
30 Pair Box
1
-
20000
Supply and laying of following 0.61mm dia annealed tinned copper conductor PvC insulated and PVC sheathed unrmoured telephone cable in existing conduit in concealed/surface system complete as required
-
-
-
30 Pair Cable
100
-
160
Providing, fixing, connecting, testing and commisssioning of zinc passivated box with moulded plate in recess or on surface moulded type with following including all necessary materials etc. as required.
-
-
-
Computer Terminal
18
-
400
2 Pair telephone cord outlet (RJ-11)
20
-
372
TV antina Socket outlet
4
-
372
Supplying and fixing of following size PVC conduit alongwith the accessories in surface / recess including painting in case of surface conduit or cutting and making good the same in case of recessed conduit as required as per specification.
-
-
-
20mm dia
600
-
81
25mm dia
150
-
88
32mm dia
100
-
110
Providing and fixing of UTP CAT 6 COMPUTER LAN CABLE WITH STAR SEPARATOR in existing conduits .
450
-
32
Supplying and drawing co-axial TV cable RG-6 grade, copper conductor PE insulated, with PVC shield in the existing surface/ recessed PVC conduit as required.
200
-
43
Supplying, drawing, of 0.5mm dia (2 pair) FR PVC insulated copper
conductor, unarmoured telephone cable in existing surface/ recessed PVC conduit as required
400
-
25
Supplying, drawing, of 0.5mm dia (3 pair) FR PVC insulated copper conductor, unarmoured telephone cable in existing surface/ recessed PVC conduit as required
100
-
25
SPEAKERS, FIRE ALARM AND DETECTION SYSTEMS : Supplying and fixing of following size PVC conduit alongwith the accessories in surface / recess including painting in case of surface conduit or cutting and making good the same in case of recessed conduit as required as per specification.
-
-
-
25mm dia
1100
-
88
32mm dia
300
-
110
Supplying and laying of following sizes FR PVC insulated single core copper wire in existing conduit complete as required.
-
-
-
2x1.5 sq mm
1050
-
55
2x2.5 sq mm
250
-
71
Supply, Installation, Testing and Commissioning of plug in type intelligent photoelectric smoke detectors including the cost of supplying base plate, mounting accessories etc. cmplete as required.
120
-
2338
Supplying installation, testing and commissioningof analogue addressable rate of rise cum fixed temperature heat detector with built-in fault isolator as required.
5
-
2389
Supplying installation, testing and commissioning of addressable manual call station complete as requied
6
-
2024
Supplying installation, testing and commissioning of addressable response indicator complete as required.
20
-
515
Supplying installation, testing and commissioning of Fault isolator base / Module capable of monitoring shorted loop circuit and automaticaly restore communication when shorted conditions are corrected
6
-
1697
Supplying installation, testing and commissioning of hooter cum strobe with control module complete as required.
4
-
3606
Supplying installation, testing and commissioning of Four Zone "X" Loop (150 Detectors, 100 Devices) (Fire Alarm capabulity : 1 Loop x 100/125/150 detectors with a minumum of 1 loop wall recess mounting microprocessor based analogue addressable Fire Control Pannel expandable with minimum 80 character LCD Display, 4 access levels, 1000 events historical logging, flash E-PROM, 240 volts ac power supply, automatic battery charger, 24V sealed lead acid battery suitable operating the system for 30 minute in emergency conditions. The Panel shall be integrated with the PA System and suitable power amplofiers for hooterribes. The panel shall provide either or all BACNET/RS485/LON protocols as required/
1
-
223640
Supplying installation, testing and commissioning of addressable control switches for shutting down AHUs Lifts etc.
2
-
2200
Supply and Installation Round Speaker for ceiling mounting arrangement (0-2 watts) with multiple taping complete as required.
100
-
950
Supplying, installing, testing and commissioning of 2 x 1.0 Sqmm. IND. 1.1KV Speaker Cable in exisiting conduit.
1250
-
28
Supply and installation Wall mounted speaker with mounting arrangement with multiple taping complete as required.
6
-
2350
INTERNAL WIRING AND FINAL DISTRIBUTION BOARDS : Wiring for Light point / Fan point / Exhaust Fan point / Call Bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit , with modular switch ,modular plate ,suitable GI box as required
-
-
-
a) Group - C
175
-
796
Wiring for twin controlled light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit , with 2 way modular switch ,modular plate ,suitable GI box etc as required.
20
-
835
Wiring for group controlled ( Looped ) light/ceiling fan/exhaust fan/call bell point ( With out independent switch etc.) with 2x1.5 sq.mm PVC insulated stranded copper conductor cable alongwith 1 No. 1.5 sq.mm PVC insulated copper conductor cable for earthing in surface/recessed steel conduit as required. (Point shall be controlled / looped From existing point).
-
-
-
a) Group - C
225
-
601
Wiring with 2 x 2.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 2.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.( For primary 5A Socket , Primary MCB Point and Circuit Wiring)
800
-
168
Wiring with 2 x 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 1.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.( For Secondary MCB Points and 5A Secondary Points)
1250
-
144
Wiring for light / power plug point with 2 x 4 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC Medium Class conduit alongwith 1 No. 4 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.( For 16A Socket)
350
-
202
Wiring for light / power plug point with 2 x 6 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 6sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.( For A/C Sockets)
150
-
265
Wiring for DB submain with 4 x 16 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 2 No. 16sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.
110
-
1073
Wiring for DB submain with 4 x 10 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 2 No. 10sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.
140
-
641
Wiring for DB submain with 2 x 10 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 10 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.
50
-
363
Wiring for DB submain with 2 x 6 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 6 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required.
50
-
265
Power Socket : Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 3 pin 5 / 6 amps modular socket outlet and 5 / 6 amps modular switch,connection,painting etc.as required.
60
-
328
Supplying and fixing suitable size GI box with modular plate and cover in Front on surface or in recess ,including providing and fixing 6 pin 15 / 16 modular socket outlet and 15 / 16 amps modular switch,connection,painting etc.as required.
110
-
415
Supplying and fixing 20 Amps ,240 Volts , SPN industrial type , Socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps , 2Pole, RCCB in sheet steel enclosure , on surface or in recess with chained metalcover for the socket out let and complete with connections, testing and commissioning etc. as required.
-
-
-
20A, 3 pin socket outlet controlled by 20A 2P RCCB
10
-
2185
FINAL DISTRIBUTION BOARD : Supplying installation, testing and commissioning of surface-recess mounting type three pole and neutral,prewired, sheet steel, MCB
distribution board 415 volt, tinned copper busbar, common netrul link, earth bar, din bar for mounting MCB detachable gland /knock out plate„ phosphatized and powder coated and complete with MCBs . RCCBs , Isolator etc as required
-
-
-
iv) 24 Nos. 6-32 Amps SP MCBs as outgoing
3
-
15546
A. TP&N D.B (HORIZONTAL TYPE)
-
-
-
iii) 12 Nos. 6-32 Amps SP MCBs as outgoing
2
-
11999
Supplying installation, testing and commissioning of surface-recess mounting type Siingle pole and neutral,prewired, sheet steel, MCB
distribution board 240 volt, tinned copper busbar, common netrul link, earth bar, din bar for mounting MCB detachable gland /knock out plate„ phosphatized and powder coated and complete with MCBs . RCCBs , Isolator etc as required
-
-
-
ii) 10 Nos. 6-32 Amps SP MCBs as outgoing
1
-
4904
SP&N D.B. (HORIZONTAL TYPE) ii) 6 Nos. 6-32 Amps SP MCBs as outgoing
3
-
3772
Supply and installation of 2kVA UPS with 30 minutes backup (Single Phase input and Single Phase Output)
1
-
37161
EXTERNAL ELECTRICAL WORKS : Construction brick chamber with cover for cable entry of following sizes inside dimension) with cement concrete above work in cement mortar 1:5 (1 cement : 5 coarse sand) including making necessary notch for lighting the cover necessary excavation 10cm thick foundation concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) and inside and outside plastering with cement mortar 1:3 (1 Cement and 50% coarse sand) with floating coat of neat cement finish complete as per requirement.
-
-
-
600mm x 600mm x 750mm deep man hole
6
-
10000
450mm x 450mm x 600mm Deep man hole
6
-
8000
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
100 mm dia
150
-
355
150 mm dia
80
-
405
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
50
-
135
120 mm dia (OD-120 mm & ID-103 mm nominal)
70
-
229
160 mm dia (0D-160 mm & ID-135 mm nominal)
100
-
313
Erection Of metallic street light standard pole of length exceeding 6.5mtrs but not exceding 8.5mtrs in in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregated 40mm nominal size) foundation with cement concerete collar of size 0.4m dia X 0.5m dia height to accomodate the looping type cable end box including excabation and refilling etc as required
12
-
2774
Erection Of metallic street light standard pole of length exceeding 4.5mtrs but not exceding 6.5mtrs in in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregated 40mm nominal size) foundation with cement concerete collar of size 0.4m dia X 0.5m dia height to accomodate the looping type cable end box including excabation and refilling etc as required
7
-
2313
Supplying and fixing of 45W LED out door type suitable to mount on pole as described in item No. 6
7
-
5757
Supplying and fixing of 70W LED out door type suitable to mount on pole as described in item No. 5
12
-
8195
Supply of following sizes sizes of PVC insulated PVC sheathed aluminium conductor armoured 1.1 KV grade as as required.
-
-
-
2C x 6 sq mm
550
-
141.9
2C x 10 sq mm
300
-
178.2
2C x 16 sq mm
150
-
210.1
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 25 sq. mm
250
-
199
Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc as required.
-
-
-
Upto 25 sq. mm
300
-
137
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ STONE WARE / METAL pipe/ Cable Trays as required.
-
-
-
Upto 25 sq. mm
450
-
29
Supplying and making end termination of following sizes with brass compression gland including providing and crimping solderless plugs/ferrules of sizes PVC insulated PVC sheathed aluminum conductor armoured cable 1.1 KV grade.
-
-
-
2C x 6 sq mm
16
-
157
2C x 10 sq mm
24
-
158
2C x 16 sq mm
8
-
170
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc as required
2000
-
30
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc as required ( but with out charcoal/coke and salt )
4
-
2447
Extra for using charcoal and salt for pipe earth electrode complete as required.
4
-
1312
Supplying for using charcol and salt for pipe earth electrode complete as required
50
-
388
Wiring with 2 x 2.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 2.5 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required
150
-
168
Wiring with 2 x 4.0 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit alongwith 1 No. 4.0 sq.mm FR PVC insulated copper conductor single core cable for loop earthing as required
100
-
202
WATER SUPPLY AND PLUMBING : Providing and fixing male ended 15 mm dia brass bib cock of approved quality ( wt not less than 350 gms ) with extra socket all complete as per specification and direction of E/I .
20
-
301.69
Providing and fixing 15 mm dia male ended C.I .Body brass spindle valve and seat bib cock of approved quality (wt not less than 400 gms ) with extra socket all complete as per specification and direction of E/I .
2
-
152.19
Providing and fixing 15 mm dia male ended C.I push cock (wt not less
than 400 gms ) of approved quality with extra socket all complete
as per specification and direction of E/I .
2
-
131.49
Providing and fixing brass / C.I. Stop cock of approved quality all complete as per specification and direction of E/I .
-
-
-
A) BRASS STOP COCK
-
-
-
(a) 15 mm dia
2
-
232.69
(b) 20 mm dia
2
-
306.91
Providing and fixing 15 mm dia and 45 cm. long P. V .0 connection pipe with heavy quality brass coupling at both ends etc. all complete as per specification and direction of E/I .
66
-
95.84
Providing and fixing 15mm size C.P brass pillar cock (Weight not less than 350 gms) C.I body brass spindle pillar cock of approved quality as per spcification and direction of ELL
-
-
-
(b) C.I. body brass spindle
32
-
245.34
Providing and fixing Gun metal full way valve of approved qualtiy, all complete as per specification and direction of E/I
-
-
-
(a) 15 mm dia wt not less than 300 gms
2
-
293.64
(a) 20mm dia wt not less than 400 gms
12
-
393.16
(a) 25 mm dia wt not less than 500 gms
6
-
483.79
(a) 32 mm dia wt not less than 700 gms
6
-
673.81
(a) 40 mm dia wt not less than 1kg
6
-
1209.21
(a) 50 mm dia wt not less than 1.5 kg
5
-
1348.27
Cutting drain width wise above G.L for laying G.I pipes and restoring with brick in cement mortar (1:4) 12mm cement plaster in (1:4) with neat cement punning as per specification and direction of E/I
30
-
94.62
Cutting chajja or cornice for laying G.I pipe and restoring the same with R.C.0 (1:2:4) brick work in cement mortar (1:4) and cement plaster (1:4) as per specification and direction of ELL
30
-
99.74
Supplying, fitting and fixing the following items complete with all materials as per specification and direction of ELL
-
-
-
(a) Glass shelf with C.P brass rail
-
-
-
1) 600 x 125 mm
10
-
475.96
(b) Mirrors of 4 mm thick plate glass bevelled edge mirror including C.P brass revolving fittings, 3 mm plywood board and C P hinges to fix with mirror
-
-
-
(1)600x450 mm
34
-
1001.41
( c) C.P brass towel rail 20 mm x 600 mm with bracket container
8
-
505.76
(2) C.P brass shop dish container medium quality with screw and hinges etc.
8
-
159.71
(3) C.P brass liquid shop container
10
-
331.06
Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with "p" trap of Parry Hindustan or any other I.S.S. make including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of ELL
-
-
-
(b)12.5 lit. low level P.V.C. cistern
19
-
4010.37
Supplying, fitting and fixing white glazed fire clay sink of approved make with overflow arrangements supported on C.I. or R.S. painted brackets 40 mm dia C.P. brass waste with C.P. brass chain and rubber plug, 40 mm dia P.V.C. waste pipe about 750mm long with brass coupling at one end and 15 mm C.I. body brass spindle bib cock of approved quality of weight not less than 450 grms. including cutting wall and making good the same etc. all complete as per specification and direction of E/I.
-
-
-
(b) Kitchen sink of size 600 mm x 450 mm x 250 mm
1
-
4670.2
Supplying fitting and fixing H.C.I, pipes with ear of approved make confirming to I.S.I. 1729 including supplying nails and bobins short pieces, cutting loose collars, lead and yarn for making lead chaulked joints, cutting pipes to size including earth work or scaffolding where neccessary etc. all complete as per specification and direction of ELI.
-
-
-
(a) 100 mm dia
440
-
766.58
(b) 75 mm dia
25
-
564.14
(c) 50 mm dia
25
-
444.71
Supplying and fixing H.C.I, fittings of approved make confirming to I.S.S. 1729 including supplying nails and bobins lead and yarn for making lead chaulked joints including earth work or providing scaffolding as the case may be all complete as per specification and direction of ELI.
-
-
-
(A) H.C.I, single junction with door but without ear except socket
-
-
-
(i) 100mmdia(Wt. 10.5 Kg. app.)
30
-
1132.8
(ii) 80 mm dia (Wt. 7 Kg. )
3
-
914.98
(B) H.C.I. Heal Rest Bend
-
-
-
(i) 100 mm dia (Wt. 5.5 Kg. app.)
16
-
671.22
(ii) 80 mm dia (Wt. 4 Kg. app.)
2
-
531.4
(iii) 50mm dia (Wt. 3.5 Kn. app.)
2
-
461.25
(C)100mm dia H.C.I."P" TRAP with Anti syphonage Horn (Wt. 8.5 Kg. app.)
2
-
749.43
(D)H.C.I, double junction with door and ear
-
-
-
(i) 100 mm dia (Wt. 15.5 Kg. app.)
2
-
1375.88
(ii) 80 mm dia (Wt. 15.5 Kg. app.)
2
-
1173.21
(iii) 50 mm dia (Wt. 6 Kg. app.)
2
-
829.85
(E) H.C.I, double inverted Jn.
-
-
-
(100 mm x 50 mm x 50 mm size)
2
-
1137.21
(F) H.C.I, offset with ear
-
-
-
(i) 100 mm dia (Wt. 6 Kg. app.)
2
-
599.92
(ii) 80 mm dia (Wt. 4 Kg. app. )
1
-
461.25
(iii) 50 mm dia (Wt. 3.26 Kg. app.)
1
-
319.01
(G) H.C.I, bend with door and ear
-
-
-
(i) 100 mm dia (Wt. 6.5 Kg. app.)
40
-
644.77
(ii) 80 mm dia (Wt. 4.5 Kg. app.)
4
-
644.96
(iii) 50 mm dia (Wt. 4 Kg. app.)
2
-
322.81
(H) H.C.I plain bend with ear
-
-
-
(i) 100mm dia (Wt. 5.5 Kg. app.)
80
-
611.42
(ii) 80 mm dia (Wt. 3.75 Kg. app.)
6
-
465.85
(iii) 50 mm dia (Wt. 3.25 Kg. app.)
6
-
323.61
(I) Floor trap with gratings
-
-
-
(i) 100 mm dia
47
-
558.52
(J) Norton patent H.C.I, cowl
-
-
-
(i) 100 mm dia (Wt. 3.25 Kg. app.)
14
-
518.27
(ii) 80 mm dia (Wt. 2.25 Kg. app.)
1
-
373.85
(iii) 50 mm dia (Wt. 1 Kg. app.)
1
-
262.66
H.C.I. pass over
-
-
-
(i) 100 mm dia
1
-
683.87
(iii) 50 mm dia
1
-
469.66
(M) H.C.I, single inverted junction with ear
-
-
-
(100 mm x50 mm)
1
-
854.19
Making holes in wall for laying H.C.I, pipe and restoring the same after pipe laying as per specification and direction of ELI.
-
-
-
(i) 125 mm dia
80
-
79.48
(ii) 250 mm dia
40
-
107.18
(iii) 375 mm dia
10
-
130.19
(iv) 500 mm dia
5
-
152.86
(v) R.C.C. chajja
10
-
90.98
Supplying materials and labours for painting the exposed H.C.I, pipes and fittings with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.
-
-
-
(i) 50 mm dia
20
-
19.42
(ii) 80 mm dia
20
-
29.87
(iii) 100 mm dia
250
-
35.84
Providing and fixing on wall face unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion.
-
-
-
110mm dia
360
-
236.35
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion.
-
-
-
Coupler 110 mm dia
60
-
102.65
Single Tee with door-110X110X110mm
30
-
181.55
Bend 87.5 deg 110 mm
30
-
113.1
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes confirming to IS : 13592 Type A including jointing with seal ring confirming to IS : 5382 leaving 10mm gap for thermal expansion.
-
-
-
110mm PVC Shoe
30
-
98
Providing and fixing unplasticised- PVC pipe clip of approved desing to unplasticised - PVC rain water pipes by means of 50x50x5Omm hard wood plugs, screwes with M.S. Screw of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 Cement : 4 Coarse sand ) and making good the wall etc. complete.
-
-
-
110mm dia
220
-
181.4
Providing and Fixing white vitreous china battery based infrared sensor operated urinal of appx. Size 610x390x370mm having pre & post flushing with water (250ml & 500ml consumption) having water inlet from back side, including fixing to wall with suitable bracket all as per manufacturers specification and direction of Eingineer-in-charge.
10
-
5162.2
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end):
-
-
-
65 mm nominal bore
2
-
1286.8
80 mm nominal bore
2
-
1919.5
Providing and fixing C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931.
-
-
-
15 mm nominal bore
66
-
475.7
Supplying pig lead at site of work
9
-
16039.4
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15cm diameter and weighting not less than 440 grams
32
-
40.9
Providing and placing on terrace (at all floor levels) polyethulene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.-Circular tank.
40000
-
7.25
Excavating trenches of required width for pipe, cables etc including excavation for sockets ,& dressing of sides ,ramming of bottoms ,depth upto 1.5m including getting out the excavated soil,& then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming ,watering, etc and disposing of surplus excavated soil as directed, within lead of 50m.
-
-
-
up to 1.50 m depth
-
-
-
Pipes 80 mm to 300 mm diameter
850
-
225.45
1.50 m to 3.00 m depth
-
-
-
Pipes 80 mm to 300 mm diameter
200
-
286
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (lcement : 2 fine sand) including testing of joints etc. complete.
-
-
-
150 mm. dia. RCC Pipes
120
-
356.7
250 mm. dia. RCC Pipes
730
-
482.05
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) alround SW pipes including bed concrete as per standard design.
-
-
-
150 mm. dia. RCC Pipes
120
-
761.85
250 mm. dia. RCC Pipes
730
-
1027
Construction brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand 4 graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90 x 80 cm and 45 cm deep including CI cover with frame(medium duty) 500mm internal diameter, total weight of cover and frame to be not less than116 kg (weight of cover 58 kg and weight of frame 58 kg).-With FPS bricks of class designation 75.
18
-
8634.1
Inside size 120 X 90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg).With FPS bricks of class designation 75
6
-
18422.4
Extra for depth for manholes
-
-
-
Size 90x80cm with FPS bricks of class designation 75
4
-
5718.6
Size 120x90cm with FPS bricks of class designation 75
1
-
6850.7
Providing M.S. foot rests including fixing in manholes with 20*20*10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) as per standard design : with 20 x 20 mm square bar
60
-
327.9
Providing and fixing square mouth SW gully trap class SP-1 complete CI grating brick masonry chamber and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.7 kg. as per standard design.
-
-
-
100x100mm size P type
-
-
-
With common burnt clay F.P.S (non modular) bricks of class designation 7.5.
1
-
1602.4
180x150mm size P type
-
-
-
With common burnt clay F.P.S (non modular) bricks of class designation 7.5.
8
-
1706.55
Providing and fixing wash basin with CI brackets,15mm brass pillar taps,32mm CP brass waste of standard pattern, including painting of fittings and brackets,cutting and making good the walls wherever required.
-
-
-
White vitreous china wash basin size 630 mm x 450 mm with a single 15mm CP brass pillar tap.
34
-
2020.6
Constructing brick masonry road gully chamber 50 X 45 X 60 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) including 500 X 450 mm precast R.C.C. horizontal grating with frame complete as per standard design :
-
-
-
With common burnt clay F.P.S (non modular) bricks of class designation 7.5.
44
-
4043.1
Boring/drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS:2800 (part-1) including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of engineer-in-charge, upto 90 metre depth below ground level.
-
-
-
300mm dia
40
-
407.1
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS : 12818, including hire & labour charges, fittings & accessories etc, all complete, for all depths, as per direction of engineer-in-charge.
-
-
-
100mm nominal size dia
40
-
448.05
Supplying & filling, sepreading & leveling stone boulders of size range 5cm to 20cm, in the recharge pit, in the required thickness, for all leads & lifts, all complete, for all depths, as per direction of engineer-in-charge.
5
-
921.9
Supplying & filling, sepreading & leveling gravels of size range 5mm to 10mm, in the recharge pit, over the existing layer of boulders, in the required thickness, for all leads & lifts, all complete, as per direction of engineer-in-charge.
5
-
1038.05
Supplying & filling, sepreading & leveling coarse sand of size range
1.5mm to 20mm, in the recharge pit, in the required thickness over gravel layer, for all leads & lifts, all complete, as per direction of engineer-incharge.
5
-
1038.05
Providing and fixing Bail plug / Bottom plub of required dia to the bottom of pipe assembly of tubewell as per IS : 2800 (part -1)
-
-
-
100mm dia
1
-
184.3
Providing and fixing in position pre-cast RCC manhole cover and frame of required shape & approved quality
-
-
-
Circular shape 560 mm internal diameter-EHD-35
4
-
1656.7
Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks in cement mortar 1:4 ( 1 cement :4 coarse sand) with precast R.C.C. vertical grating complete as per standard design:
-
-
-
With common burnt clay F.P.S. bricks(non modular) of class designation 7.5
4
-
4043.1
WATER SUPPLY : Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of engineer in charge..
-
-
-
Internal Work - Exposed on Wall
-
-
-
15 mm nominal outer dia pipes.
20
-
142.95
20 mm nominal outer dia pipes.
40
-
179.95
25 mm nominal outer dia pipes.
130
-
216.2
32 mm nominal outer dia pipes.
70
-
289.05
40 mm nominal outer dia pipes.
100
-
385.5
50 mm nominal outer dia pipes.
60
-
548.55
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This including jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of engineer in charge.
-
-
-
Concealed work including cutting chases and making good the walls etc.
-
-
-
15 mm nominal outer dia pipes.
10
-
246.2
20 mm nominal outer dia pipes.
240
-
284.85
25 mm nominal outer dia pipes.
70
-
333.6
32 mm nominal outer dia pipes.
180
-
412.9
Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot & cold water supply including all (CPVC) plain & brass threaded fittings. This including jointing of pipes & fittings with one step CPVC solvent cement , trenching, refilling & testing of joints complete as per direction of Engineer in charge.
-
-
-
40mm Nominal outer dia pipes
400
-
321.15
62.50 mm nominal inner dia pipes.
20
-
1081.75
Add 12% GST
1
-
5371585.61
Adding Labour Cess @ 1%
1
-
501347.99
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements