Central Coalfields Limited Tender
Search from across the categories, cities, and authorities to find the latest Jharkhand tenders. Every Jharkhand tender is curated from credible sources of government websites (eProcurement Jharkhand portal) and newspapers, thus ensuring the credibility of the information presented to you. For more information on Jharkhand tender bidder registration, the login process and more read the FAQs section on this page.
Costs
EMD
₹ 9,79,800Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CCL_303608_1Bid Award Id
ViewTender No
CCL/GM(WnS)/NIT/23-24/7529-40 Dt. 01.03.2024Tender Authority
Central Coalfields Limited ViewPurchaser Address
-Website
http://http://www.centralcoalfields.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size)(Refer: CPWD DSR'14, Item No. 4.1.9)
40.71
213025
5232.76
Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (Refer: CPWD DSR'14, Item No. 5.1.2)
94.65
678825
7171.95
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts, etc. upto floor five level excluding cost of centring, shuttering1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (Refer: CPWD DSR'14, Item No. 5.2.2)
19.8
166253
8396.65
Brick work with F.P.S. bricks of class designation 50 in foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand) (Refer: CPWD DSR'14, Item No.6.1.2 )
93.6
475330
5078.32
Brick work with F.P.S. bricks of class designation 5.0 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)(Refer: CPWD DSR'14, Item No. 6.4.2 DR)
151.2
939360
6212.7
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (Refer: CPWD DSR'14, Item No. 4.2.3)
7.2
55778
7747.02
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for: Foundations, footings, bases of columns etc. for mass concrete.(Refer: CPWD DSR'14, Item No. 5.9.1)
288.06
68860
239.05
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.(Refer: CPWD DSR'14, Item No. 5.9.5)
208
99030
476.11
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts (Refer: CPWD DSR'14, Item No. 5.9.6)
292.8
180312
615.82
12 mm cement plaster of mix :1:6 (1 cement : 6 fine sand) (Refer: CPWD DSR'14, Item No. 13.1.2)
1273.6
268780
211.04
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand) (Refer: CPWD DSR'14, Item No. 13.16.1)
24
4553
189.71
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars (Refer: CPWD DSR'14, Item No. 5.22.6)
9465
696907
73.63
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars (Refer: CPWD DSR'14, Item No. 5.22 A.6)
1980
145787
73.63
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (Refer: CPWD DSR'14, Item No. 2.25)
1286.18
218972
170.25
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Refer: CPWD DSR'14, Item No. 10.2)
1594.86
148943
93.39
Providing and fixing concertina coil fencing with required dia 610 mm (having 50 nos. round per 6 metre length) upto 3m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. stud tied with G.I. staples and G.I. clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all complete as per direction of Engineer-in-charge with reinforced barbed tape (R.B.T.)/ Spring core (2.5mm thick) wire of high tensile strength of 165 kg/sq.mm with tape (0.52mm thick) and weight 43.478 gm/metre (cost of M.S. angle, C.C. blocks shall be paid separately).(Refer: CPWD DSR'14, Item No. 16.53)
320
80438
251.37
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias a nd similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over 0.50 sqm (Refer: CPWD DSR'14, Item No. 8.2.2.2)
24
103599
4316.66
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete:Fixed to steel windows by welding (Refer: CPWD DSR'14, Item No. 9.48.1)
1062
153862
144.88
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm (Refer: CPWD DSR'14, Item No. 13.45.1)
1753.49
279453
159.37
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (Refer: CPWD DSR'14, Item No. 13.62.1)
5.18
807
155.9
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-incharge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage(Refer: CPWD DSR'14, Item No. 16.60.1)
6.6
28500
4318.19
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.(Refer: CPWD DSR'14, Item No. 2.31)
56
53981
963.95
Part-B: Building portion
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.(Refer: CPWD DSR'14, Item No. 2.6.1)
1520.24
313549
206.25
Extra for every additonal lift of 1.5 m or part thereof in :All kinds of soil. (Refer: CPWD DSR'14, Item No. 2.26.1)
380.06
26535
69.82
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed within a lead of 50m.(Refer: CPWD DSR'14, Item No. 2.8.1)
11.7
2446
209.11
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m (Refer: CPWD DSR'14, Item No. 2.25)
1140.18
194115
170.25
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. (Refer: CPWD DSR'14, Item No. 2.27)
148.14
124490
840.36
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. (Refer: CPWD DSR'14, Item No. 2.31)
987.57
951968
963.95
Supplying chemical emulsion in sealed containers including delivery as specified. Chlorpyriphos/ Lindane emulsifiable concentrate of 20% (Refer: CPWD DSR'14, Item No. 2.34.1)
251.94
46845
185.94
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (Refer: CPWD DSR'14, Item No. 2.35.3.1)
987.57
178355
180.6
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (Refer: CPWD DSR'14, Item No. 4.1.8)
116.36
608883
5232.76
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (Refer: CPWD DSR'14, Item No. 4.1.10)
100.98
501218
4963.54
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing top smooth.(Refer: CPWD DSR'14, Item No. 4.17)
60.53
36057
595.7
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.
(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) All works upto plinth level (Refer: CPWD DSR'14, Item No. 5.33.1)
449.89
3266453
7260.56
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately) All works above plinth level upto floor V level (Refer: CPWD DSR'14, Item No. 5.33.2)
789.37
6582769
8339.27
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for: Foundations, footings, bases of columns etc. for mass concrete. (Refer: CPWD DSR'14, Item No. 5.9.1)
448.35
107178
239.05
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (Refer: CPWD DSR'14, Item No. 5.9.2)
369
190769
516.99
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. (Refer: CPWD DSR'14, Item No. 5.9.5)
1925.58
916787
476.11
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts (Refer: CPWD DSR'14, Item No. 5.9.6)
1452
894170
615.82
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for:Suspended floors, roofs, landings, balconies and access platform. (Refer: CPWD DSR'14, Item No. 5.9.3)
2608.12
1550188
594.37
Centring and shuttering including strutting, propping etc. and removal of form for removal of form for: Shelves (Cast in situ) (Refer: CPWD DSR'14, Item No. 5.9.4)
40.68
24178
594.37
Centering and shuttering including strutting, propping etc. and removal of form for :Stairs, (excluding landings) except spiral-staircases (Refer: CPWD DSR'14, Item No. 5.9.7)
10.66
5674
532.35
Centring and shuttering including strutting, propping etc. and removal of form f :or removal of form forWeather shade, Chajjas, corbels etc., including edges (Refer: CPWD DSR'14, Item No. 5.9.19)
9.72
6324
650.68
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars (Refer: CPWD DSR'14, Item No. 5.22.6)
49768.35
3664443
73.63
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars (Refer: CPWD DSR'14, Item No. 5.22A.6)
106763.6
7861003
73.63
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (Refer: CPWD DSR'14, Item No. 5.3)
15.6
130683
8377.14
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) (Refer: CPWD DSR'14, Item No. 6.1.1)
2
10594
5297.06
Brick work with F.P.S. bricks of class designation 5.0 in superstructure above plinth level upto floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) (Refer: CPWD DSR'14, Item No. 6.4.2)
557.97
3466500
6212.7
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias a nd similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over 0.50 sqm (Refer: CPWD DSR'14, Item No. 8.2.2.2)
47.46
204868
4316.66
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge Granite work (Refer: CPWD DSR'14, Item No. 8.3.2)
67.8
19193
283.09
Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete (Refer: CPWD DSR'14, Item No. 8.4)
40.68
15108
371.39
Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete Granite of any colour and shade (Refer: CPWD DSR'14, Item No. 8.9.1.2)
49.5
124285
2510.82
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges
with necessary screws (Refer: CPWD DSR'14, Item No. 9.20.1)
100.14
289808
2894.03
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. (Refer: CPWD DSR'14, Item No. 9.21.1)
54.53
94474
1732.53
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I). On one side only (Refer: CPWD DSR'14, Item No. 9.22.1)
54.53
20267
371.68
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured (Refer: CPWD DSR'14, Item No. 9.23)
100.14
34893
348.45
Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm (Refer: CPWD DSR'14, Item No. 9.96.1)
126
28680
227.62
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm (Refer: CPWD DSR'14, Item No. 9.97.2)
126
11457
90.93
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm (Refer: CPWD DSR'14, Item No. 9.97.3)
126
9979
79.2
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm (Refer: CPWD DSR'14, Item No. 9.97.4)
276
18149
65.76
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (Refer: CPWD DSR'14, Item No. 9.100.1)
252
13167
52.25
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 75 mm (Refer: CPWD DSR'14, Item No. 9.100.3)
138
5565
40.33
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete: Twin rubber stopper. (Refer: CPWD DSR'14, Item No. 9.101.2)
126
9444
74.96
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers speci fication and direction of Engineer-in-Charge. (Refer: CPWD DSR'14, Item No. 9.119)
4.8
2064
430.06
Providing and fixing to existing door frames.: Providing and fixing factory made panel PVC door shutters consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15mm x 15mm for top and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheets out of which 75mm shall be flat and 20mm shall be tapered in 45degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail and bottom rail. panelling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/sealed to An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-Charge. Manufacture's specification & drawing (for W.C. and bathroom shutters).(Refer: CPWD DSR'14, Item No. 9.120.1)
1.47
3071
2089.61
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete With 12 mm mild steel U beading (Refer: CPWD DSR'14, Item No. 9.135.2)
62.39
53514
857.74
Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction
of Engineer-in-charge (Dash fastener to be paid for separately).(Refer: CPWD DSR'14, Item No. 9.136)
43.2
54003
1250.07
Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately).(Refer: CPWD DSR'14, Item No. 9.137)
20.16
115829
5745.51
Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of appropriate size, made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc., complete all as per direction of Engineer-in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance (Refer: CPWD DSR'14, Item No. 9.138.1)
4.32
109923
25445.23
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete (Refer: CPWD DSR'14, Item No. 9.165)
16
2845
177.86
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer Using M.S. angels 40x40x6 mm for diagonal braces (Refer: CPWD DSR'14, Item No. 10.5.1)
7.56
30040
3973.63
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge:Fixing with adjustable lugs with split end tail to each jamb (Refer: CPWD DSR'14, Item No. 10.14.2.1)
855.2
360706
421.78
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineerin-charge Profile E Fixing with adjustable lugs with split end tail to each jamb (Refer: CPWD DSR'14, Item No. 10.14.3.1)
855.2
390509
456.63
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing (Refer: CPWD DSR'14, Item No. 10.18)
58
8576
147.87
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works(Refer: CPWD DSR'14, Item No. 10.25.2)
803.25
93578
116.5
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).(Refer: CPWD DSR'14, Item No. 10.28)
4590
2836665
618.01
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete(Refer: CPWD DSR'14, Item No. 11.5)
31.1
23333
750.28
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement 18 mm thick(Refer: CPWD DSR'14, Item No. 11.6.1)
2
855
427.85
Crazy marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from 1 mm to 4 mm nominal size by volume), with under layer 25 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc. complete(Refer: CPWD DSR'14, Item No. 11.15.1)
15
17966
1197.77
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.(Refer: CPWD DSR'14, Item No. 11.27)
2.54
4101
1614.74
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick(Refer: CPWD DSR'14, Item No. 11.26.1)
60.34
85048
1409.48
Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab.(Refer: CPWD DSR'14, Item No. 11.31)
22.4
3184
142.17
Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.05 metre.(Refer: CPWD DSR'14, Item No. 11.32)
0.68
18
27.62
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.(Refer: CPWD DSR'14, Item No. 11.36)
1110.67
1081559
973.79
52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete(Refer: CPWD DSR'14, Item No. 11.4)
220.28
151486
687.7
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete :Size of Tile 60x60 cm (Refer: CPWD DSR'14, Item No. 11.41.2)
2083.71
3183846
1527.97
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm(Refer: CPWD DSR'14, Item No. 11.46.2)
215.49
339683
1576.33
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias a nd similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over 0.50 sqm(Refer: CPWD DSR'14, Item No. 8.2.2.2)
92.33
398557
4316.66
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complet(Refer: CPWD DSR'14, Item No. 12.22)
12
2403
200.28
12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)(Refer: CPWD DSR'14, Item No. 13.1.1)
5789.99
1294873
223.64
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand)(Refer: CPWD DSR'14, Item No. 13.11)
1279.53
417651
326.41
Providing and fixing dry cladding upto 10 metre heights with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately) Red sand stone(Refer: CPWD DSR'14, Item No. 7.40.1)
639.77
1990081
3110.62
Providing and fixing dry cladding upto 10 metre heights with 30 mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately) White sand stone(Refer: CPWD DSR'14, Item No. 7.40.2)
639.77
2135539
3337.98
Providing and fixing structural steel frame (for dry cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/ rectangular tube in the required pattern as per architectural drawing, including cost of cutting, bending, welding etc. The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/ flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support stone cladding, the steel work will be given a priming coat of Zinc primer as approved by Engineerin-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution). The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall be paid for separately and nothing extra shall be paid)(Refer: CPWD DSR'14, Item No. 7.41)
605.25
104617
172.85
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge.(Refer: CPWD DSR'14, Item No. 7.42)
1154
319265
276.66
6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)(Refer: CPWD DSR'14, Item No. 13.16.1)
2608.12
494786
189.71
Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete(Refer: CPWD DSR'14, Item No. 13.26)
5628.59
1062058
188.69
Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification Two or more coats on new work(Refer: CPWD DSR'14, Item No. 13.42.1)
8236.71
600373
72.89
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) (Refer: CPWD DSR'14, Item No. 13.47.1)
161.4
19718
122.17
Applying priming coat :With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)(Refer: CPWD DSR'14, Item No. 13.50.1)
120.17
5726
47.65
Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works(Refer: CPWD DSR'14, Item No. 13.50.3)
291.21
12341
42.38
Painting with synthetic enamel paint : Two or more coats on new work (Refer: CPWD DSR'14, Item No. 13.61.1)
742.82
81227
109.35
French spirit polishing Two or more coats on new works including a coat of wood filler(Refer: CPWD DSR'14, Item No. 13.68.1)
20
6201
310.09
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)(Refer: CPWD DSR'14, Item No. 21.1.1.2)
1071.74
468168
436.83
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately.) ; Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. minimum anodic coating of grade AC 15)(Refer: CPWD DSR'14, Item No. 21.1.2.1)
2500.73
1209803
483.78
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge With float glass panes of 5.50 mm thickness(Refer: CPWD DSR'14, Item No. 21.3.2)
324.77
374076
1151.82
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Upto 5mm depth and 5 mm width(Refer: CPWD DSR'14, Item No. 21.8.1)
456.4
28757
63.01
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per direction of Engineer-in-Charge Powder coated minimum thickness 50 micron aluminium
tubular handle bar(Refer: CPWD DSR'14, Item No. 21.12.2)
8
4416
552.06
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).(Refer: CPWD DSR'14, Item No. 22.3)""Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).(Refer: CPWD DSR'14, Item No. 22.3)""Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).(Refer: CPWD DSR'14, Item No. 22.3)
253.32
151300
597.27
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above Code No. Description Unit Rate ` SUB HEAD : 22 - WATER PROOFING 371 operations to be done in order and as directed and specified by the Engineerin-Charge : 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.(Refer: CPWD DSR'14, Item No. 22.7.1)
990
1147261
1158.85
Providing and applying elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats 10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge .(Refer: CPWD DSR'14, Item No. Derived_22.22A)
990
370630
374.37
Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) (Refer: CPWD DSR'14, Item No. Derived_9.168)
33.55
73040
2177.05
Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge..(Refer: CPWD DSR'14, Item No. Derived_9.169)
177.43
355527
2003.76
Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge..(Refer: CPWD DSR'14, Item No. Derived_9.170)
72
9565
132.86
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)(Refer: CPWD DSR'14, Item No. 9.114.2)
144
3785
26.29
Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75 mm(Refer: CPWD DSR'14, Item No. 9.79.4)
36
10043
278.99
Part C:Road works (120 m)
-
-
-
Excavation in Soil using Hydraulic Excavator CK 90 and Tippers with Disposal upto 1000 metres. Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m (excluding Royalty @ Rs. 24.00 per Cum but excluding watering, rolling & compaction) (Refer: JH NH SOR 2015-3.6)
180
6660
37
Embankment Construction with Material Obtained from Borrow Pits (Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2) :Rolling with vibratory roller (Refer: JH NH SOR 2015- 3.16)
240
36960
154
Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401) : for grading- II Material (Refer: JH NH 2015- 4.2 (ii) )
162
306018
1889
Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (Refer: JH NH 2015- 12.4 )
96
585312
6097
Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications :PCC Grade M20 (Refer: JH NH 2015- 12.8 (B) )
126
851508
6758
Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 (Refer: JH NH 2015- 3.18 )
480
90720
189
Part-D: Deep borewell (2 Nos.)
-
-
-
HYDT:Cost of drilling 225 mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site. (a) from 0-50 meter ( JH DW&SD SOR-15-115(i) )
100
87246
872.46
HYDT: Cost of drilling 225 mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site.(b) 51.00M to 125.00M G.I. ( JH DW&SD SOR-15-115(ii))
150
150018
1000.12
HYDT: Cost of drilling 225 mmX165mmX125meter deep bore well in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH Rig area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials tools, drilling rig, Air compressor and equipments, as well as fuel, lubricants and cost of transportation of rig machine and other vehicle up to the site.(c) 126.00M to250.00M G.I.( JH DW&SD SOR-15-115(ii))
220
253030
1150.14
Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/ plain ended casing pipes of required dia, conforming to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture, including required hire & labour charges, fittings & accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia having minimum wall thickness 5.40 mm. (Refer: CPWD DSR'14, Item No. 24.10.3)
60
96403
1606.73
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia.(Refer: CPWD DSR'14, Item No. 24.13.3)
2
439
219.52
Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts Of required size complete. 200 mm clamp.(Refer: CPWD DSR'14, Item No. 24.14.3)
2
3230
1615.41
Providing and fixing uPVC column pipes complete with necessary fittings including lowering etc. etc.32 mm dia. nominal bore (Analysed Rate)
200
35958
179.79
Providing of Nylon rope for holding the submersible pump-motor set as per instruction of Engineer-in-charge. (Analysed Rate)
220
3768
17.13
Labour Charges for lowering of submesible pump motor set in bore well along with uPVC pipe, cables, other accessories etc. complete including cost of labour, tools & plant and excluding the cost of pump, motor, cable, uPVC pipe, control panel etc. which will be paid separately. (Analysed Rate)
2
4380
2190.33
Providing and fixing Chlorinated Polyvinyl Cloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of the Engineer-in-charge.:External work:40 mm nominal outer dia pipes.(Refer: CPWD DSR'14, Item No. 18.9.5)
300
162369
541.23
Providing and fixing Chlorinated Polyvinyl Cloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of the Engineer-in-charge.External work :25 mm nominal outer dia pipes..(Refer: CPWD DSR'14, Item No. 18.9.3)
240
75844
316.02
3 Core PVC insulated , PVC sheathed copper conductor flat submersible cable , supplying , flat flexible submersible cable with copper conductor , PVC insulated , and PVC sheathed. 3 core 4 sqmm. (Analysed Rate)
300
39864
132.88
Supply, and installation of three phase 100 mm (4 inch) dia, 2 LPS, 3-phase submersible pump of capacity 3.00 HP, etc. all complete as per direction of EIC. (Analysed Rate)
2
37896
18948.2
Supply and installation of control panel board for 3-phase submersible pump of capacity 3.00 HP all complete as per direction of EIC. (Analysed Rate)
2
5512
2756.1
Part-E: Water supply and sanitation
-
-
-
Providing and fixing jaquar or equivalent Single Piece WC With PP Soft Close Seat Cover, Hinges, Dual Flush Cistern Fitting and all accessories as per the instruction of EIC.(Analysed Rate)
39
589131
15105.93
Providing and fixing stainless steel hand shower (health faucet) with 8mm dia and 1.2 Meter long flexible tube including wall hook and fittings as per the instruction of EIC (Analysed Rate)
39
61763
1583.69
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length.(Refer: CPWD DSR'14, Item No. 18.74.1)
45
2862
63.6
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore.(Refer: CPWD DSR'14, Item No. 18.53.1)
75
33984
453.13
Providing and fixing PTMT grating of approved quality and colour. Circular type. 100 mm nominal dia.(Refer: CPWD DSR'14, Item No. 18.58.1.1)
40
1784
44.6
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap..(Refer: CPWD DSR'14, Item No. 17.7.2)
42
99994
2380.83
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931: 15mm dia. nominal bore.(Refer: CPWD DSR'14, Item No. 18.52.1)
36
15496
430.45
Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete..(Refer: CPWD DSR'14, Item No. 17.31)
40
44406
1110.17
Providing and fixing PVC p-trap as per the instruction of EIC (Analysed Rate)
46
11407
247.99
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 630x450 mm.(Refer: CPWD DSR'14, Item No. 17.25.1)
39
37946
972.98
Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.(Refer: CPWD DSR'14, Item No. 17.70.1)
45
18455
410.12
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia.(Refer: CPWD DSR'14, Item No. 17.28.2.1)
45
3245
72.13
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required.(Refer: CPWD DSR'14, Item No. 17.10.2.1)
2
8965
4482.78
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 470x420 mm bowl depth 178 mm.(Refer: CPWD DSR'14, Item No. 17.10.2.3)
7
24062
3437.43
Providng and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arangement of approved quality colour:450mm long towel rail with total elgnth of 495mm, 78mm wide and effective hight of 88mm, weighin not less thatn 170gms..(Refer: CPWD DSR'14, Item No. 17.73.1)
39
20951
537.22
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms..(Refer: CPWD DSR'14, Item No. 18.65)
36
5520
153.35
Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour, weighing not less thant 105gms..(Refer: CPWD DSR'14, Item No. 17.71)
6
1094
182.39
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.(Refer: CPWD DSR'14, Item No. 17.5.1)
1
8831
8831.33
Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills, facias a nd similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 Cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite of any colour and shade: Area of slab over 0.50 sqm.(Refer: CPWD DSR'14, Item No. 8.2.2.2)
4.66
20115
4316.66
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.(Refer: CPWD DSR'14, Item No. 8.5)
1
640
640.25
Providing and fixing jaquar or equivalent wall mounted 3-in-1 bath mixer with all accessories as per the instruction of EIC. (Analysed Rate)
36
227989
6333.05
Providing and fixing jaquar or equivalent hand shower with all accessories as per the instruction of EIC. (Analysed Rate)
36
52627
1461.87
Providing and fixing jaquar or equivalent oval shaped counterbasin with all accessories as per the instruction of EIC. (Analysed Rate)
6
17542
2923.73
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 1500x450 mm.(Refer: CPWD DSR'14, Item No. 17.32.4)
3
4735
1578.39
Providing and fixing Chlorinated Polyvinyl Cloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of the Engineer-in-charge.:Concealed work including cutting chases and making good the wall etc.15 mm nominal outer dia pipes.(Refer: CPWD DSR'14, Item No. 18.8.1)
300
112287
374.29
Providing and fixing Chlorinated Polyvinyl Cloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of the Engineer-in-charge.:Concealed work including cutting chases and making good the wall etc.:20 mm nominal outer dia pipes.(Refer: CPWD DSR'14, Item No. 18.8.2)
300
135459
451.53
Providing and fixing Chlorinated Polyvinyl Cloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling and testing of joints complete as per direction of the Engineer-in-charge.External work :25 mm nominal outer dia pipes..(Refer: CPWD DSR'14, Item No. 18.9.3)
300
94806
316.02
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm nominal outer dia Pipes.(Refer: CPWD DSR'14, Item No. 18.9.6)
150
123052
820.35
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank..(Refer: CPWD DSR'14, Item No. 18.48)
15000
147300
9.82
Part E: 50 users septic tank (3 nos.)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed..(Refer: CPWD DSR'14, Item No. 2.6.1)
81.9
16891
206.25
Extra for every additonal lift of 1.5 m or part thereof in :All kinds of soil..(Refer: CPWD DSR'14, Item No. 2.26.1)
11.7
816
69.82
Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete..(Refer: CPWD DSR'14, Item No. 2.27)
2.34
1966
840.36
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size).(Refer: CPWD DSR'14, Item No. 4.1.6)
4.68
26064
5569.29
Brick work with F.P.S. bricks of class designation 50 in foundation and plinth in :Cement mortar 1:6 (1 cement : 6 coarse sand).(Refer: CPWD DSR'14, Item No. 6.1.2)
23.32
118426
5078.32
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in foundations and plinth in. Cement mortar 1:4 (1 cement : 4 coarse sand) .(Refer: CPWD DSR'14, Item No. 6.12.2)
12.48
8024
642.95
Providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6mm thick cement plaster 1:3 (1 cement :3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size)..(Refer: CPWD DSR'14, Item No. 5.12)
3.21
24774
7717.78
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars.(Refer: CPWD DSR'14, Item No. 5.22.6)
256.8
18908
73.63
12 mm cement plaster finished with a floating coat of neat cement of mix :1:4 (1 cement : 4 fine sand).(Refer: CPWD DSR'14, Item No. 13.7.2)
118.62
32970
277.95
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete..(Refer: CPWD DSR'14, Item No. 11.3.1)
24
10742
447.62
Providing and fixing soil, waste and vent pipes : 100 mm dia. Sand cast iron S&S pipe as per IS: 1729.(Refer: CPWD DSR'14, Item No. 17.35.1.1)
10.8
9410
871.35
Providing and fixing terminal guard Sand cast iron S&S as per IS - 1729.(Refer: CPWD DSR'14, Item No. 17.56.1.1)
6
1470
245.16
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Refer: CPWD DSR'14, Item No. 2.25)
27.3
4647
170.25
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size).(Refer: CPWD DSR'14, Item No. 4.1.3)
0.97
6193
6385.56
Centering and shuttering including strutting, propping etc. and emoval of form work for : Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets,kerbs and steps etc..(Refer: CPWD DSR'14, Item No. 4.3.2)
8.48
4384
516.99
Part - F: Electrical part
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B (Reffer:CPWD-E&M-2018- item no.1.10.2)
940
634612
675.12
Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required (Reffer:CPWD-E&M-2018- item no. 1.32)
108
46407
429.7
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (Reffer:CPWD-E&M-2018- item no.1.25)
82
24528
299.13
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.6 pin 15/16 amp socket outlet (Reffer:CPWD-E&M-2018- item no.1.23.5)
175
19519
111.54
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Reffer:CPWD-E&M-2018- item no.2.13.2)
8
5873
734.16
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(SINGLE POLE)(Reffer:CPWD-E&M-2018- item no.2.10.1)
138
23897
173.17
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(DOUBLE POLE)(Reffer:CPWD-E&M-2018- item no.2.10.3)
47
22875
486.71
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Reffer:CPWD-E&M-2018- item no.2.14.1)
44
74310
1688.88
Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100A(Reffer:CPWD-E&M-2018- item no.2.2.1)
4
13059
3264.89
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire )(Reffer:CPWD-E&M-2018- item no.1.14.1)
265
33337
125.8
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire )(Reffer:CPWD-E&M-2018 - item no.1.14.2)
250
36067
144.27
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required .2 X 10 sq. mm + 1 X 6 sq. mm earth wire (Reffer:CPWD-E&M-2018 - item no.1.14.5)
45
12842
285.38
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required .2 X 16 sq. mm + 1 X 6 sq. mm earth wire (Reffer:CPWD-E&M-2018- item no.1.14.6)
25
9143
365.75
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required(Reffer:CPWD-E&M-2018- item no.1.12)
270
46934
173.83
Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required 125 A 36 KA (Reffer:CPWD-E&M-2018- item no.2.2.14)
4
26343
6585.97
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) (Reffer:CPWD-E&M-2018- item no.5.9)
45
5211
115.8
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required(Reffer:CPWD-E&M-2018- item no.5.6)
4
40987
10246.88
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double door (Reffer:CPWD-E&M-2018- item no.2.5.3)
3
25816
8605.53
Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 315A(Reffer:CPWD-E&M-2018- item no.2.2.8)
1
18859
18859.27
12 way, SPN, double door, MCB DB (Analysed Rate)
55
70785
1287
supplying ceiling fan of size of 1200 mm,BLDC (Analysed Rate)
82
156374
1907
Supplying exhaust fan(150 mm) (Analysed Rate)
5
16910
3382
Exhaust Fan (Analysed Rate)
39
36309
931
Supplying LED bulb (20W,240V) (Analysed Rate)
206
46762
227
Supplying LED bulb (10W,240V) (Analysed Rate)
205
17015
83
Providing Aluminium armoured 4 core cable (Analysed Rate)
35
31395
897
Fixing Charge (10%) on items for Sl. No. 20 to 26
1
37555
37555
Total impact of GST for the purpose of CTC
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements